The total charge of the earth needed to support such a field is −4.56 × 10⁵ C.
What is electric charge ?
The physical quality of matter—its electric charge—is what causes it to feel a force when exposed to an electromagnetic field. Protons and electrons, the two types of charge carriers, typically carry positive and negative electric charges. Charges moving through a system produce energy.
What is electric field ?
According to mathematics, the electric field is described as a vector field that may be connected to each point in space and represents the force per unit charge that is applied to a positive test charge that is at rest at that location. Either the electric charge or time-varying magnetic fields can produce an electric field.
Given
E = 100 N/C inward
Flux =[tex]\dfrac{ q_{enclosed}}{\epsilon}[/tex]
−E(4πr2) =[tex]\dfrac{ q_{enclosed}}{\epsilon}[/tex] as field is inward so flux is negative
⇒ [tex]q_{enclosed}[/tex] = −εE (4πr²)
⇒ [tex]q_{enclosed}[/tex] = −εE (4πr2)
= −8.85 × 10⁻¹² × 100 × 4π × (6400×1000 m)²
= −4.56 × 10⁵ C
this charge may be coming because earth core is ionised and positively charged so on surface maybe negative charge induced.
Thus, The total charge of the earth needed to support such a field is −4.56 × 10⁵ C.
Learn more about electric charge from the given link.
https://brainly.com/question/1592046
#SPJ4
Complete question:
It turns out that there is an electric field that points inward toward the center of the Earth that has a magnitude of about 100 N/C near the Earth's surface. Estimate the total charge of the Earth needed to support such a field. Where do you think all this charge comes from?
Consider a comet which passes through its aphelion at a distance r_max from the sun. Imagine that, keeping r>max fixed, we somehow make the angular momentum l smaller and smaller, though not actually zero; that is, we let l ---> 0. Use equations (8.48) and (8.50) to show that is this limit the eccentricity epsilon of the elliptical orbit approaches 1 and that the distance of closest approach r_min approaches zero. Describe the orbit with r_max fixed but l very small. What is the semimajor axis a?
The orbit with r_max fixed but l very small is a parabola. The semimajor axis a is r_max.
What is the orbit ?An orbit is the path of a celestial object or spacecraft around a star, planet, or moon. The path is usually elliptical in shape, and a celestial object's orbital speed varies depending on its distance from the central body. An object's orbital period, or the amount of time it takes to complete one full orbit, is determined by the size of its orbit and its distance from the central body. The gravitational force of the central body affects the path of an object's orbit, and the orbital speed of the object is determined by the gravitational force and the distance of the object from the central body.
Using equations (8.48) and (8.50), we can rewrite the eccentricity of the elliptical orbit as:
\epsilon = \sqrt{1 + \frac{2l^2}{\mu r_{max}^2}}
In the limit l --> 0, the eccentricity approaches 1 and the distance of closest approach r_min approaches zero.
The orbit with r_max fixed but l very small is a parabola. The semimajor axis a is r_max.
To learn more about orbit
https://brainly.com/question/28106901
#SPJ4
How to Convert Calories to Joules?
The amount of energy needed to raise the temperature of 1 gramme of water by 1 degree Celsius is known as a calorie.
4.184 joules are needed to equal one calorie.
What is Joule?The work performed when a force of one Newton is exerted over a distance of one metre is equal to one joule, which is the SI unit of energy. It corresponds to the energy that is transmitted to an item when a force of one Newton is applied to it over a one-meter distance.
How do you determine it?Calories are easily converted to joules using a simple formula.
Increase the number of calories by 4.184 to convert them to joules. For instance, multiplying 100 calories by 4.184 to get 418.4 joules is one way to convert calories to joules.
There are two different kinds of calories: little calories and huge calories. Large calories, also known as kilocalories, are the units used in food science and the study of thermodynamics. Small calories, also known as gramme calories or just calories, are the units used in nutritional labelling.
The number of kilocalories is simply multiplied by 4184 to convert huge calories to joules.
To convert 1 kilocalorie to joules, for instance, multiply it by 4184, which will result in 4184 joules.
To know more about joule, visit:
https://brainly.com/question/13196970
#SPJ4
intentional destruction of tissue by caustic chemical, electric current, laser, or freezing. is called
Intentional destruction of tissue by caustic chemical, electric current, laser, or freezing is called ablation.
Ablation is a medical procedure used to remove or destroy abnormal or diseased tissue. The method used for ablation depends on the type and location of the tissue, and the desired outcome of the procedure. For example, electrical current can be used to destroy heart tissue causing an arrhythmia, while lasers can be used to remove unwanted skin growths. Freezing can be used to destroy abnormal tissues in the uterus or prostate, while caustic chemicals can be used to treat certain types of cancer.
To know more about tissue please refer: https://brainly.com/question/17664886
#SPJ4
7. The separation of white light into colors is called.
prism
dispersion
spectrum
reflection
Answer:
Dispersion
Explanation:
The separation of white light into colors is called dispersion. Colors dispersed vary in size of wavelengths, deviation and speeds. Together, they form white light.
Michael rides his bike south on First Street at 5 m/s. Officer Wilson sees him go right past him, from the corner of Ocean and First streets. Officer Wilson speeds after Michael on his bicycle, catching up to him after one block, when he reminds him to wear his helmet. Which statement is the most accurate description of their motion?
Group of answer choices
They are both moving at the same speed.
They both have the same displacement.
They are moving in opposite directions.
They are both moving at the same velocity.
They both have the same displacement- is the most accurate description of their motion.
What is displacement?A displacement is a vector in geometry and mechanics that has a length equal to the shortest distance between a point P's initial and final positions.
It calculates the length and angle of the net motion, or total motion, in a straight line from the starting point to the destination of the point trajectory. The translation that links the starting point and the ending point can be used to spot a displacement.
As both Michael and Officer Wilson have same initial position and final position, they both have the same displacement.
Learn more about displacement here:
https://brainly.com/question/30087445
#SPJ1
Which energy source causes the solar panel to generate electrical energy?
Answer:pv cells using electricity
Explanation:
The sunlight is the energy source causes the solar panel to generate electrical energy.
What is energy?
The definition of energy is "capacity to do work, which is ability to apply force causing displacement of an object." Energy is just the force that moves objects, despite this definition's seeming complexity.
What is electrical energy ?
A charged particle's ability to start an action or move an item is known as electrical energy. Electrical energy is produced as a result of electrons moving between atoms. Electrical energy is used to operate appliances like toasters and phone chargers every time you put them into a wall socket.
Sunlight energy is captured by the PV cells in a solar panel when the sun shines on it. By generating electrical charges that move in reaction to an internal electrical field within the cell, this energy generates electrical currents that allow electricity to flow.
Therefore, sunlight is the energy source causes the solar panel to generate electrical energy.
Learn more about energy from the given link.
https://brainly.com/question/13881533
#SPJ4
The physical environment (for example, our living spaces) that we, as individuals, create __________________. A. Is unrelated to our communicationb. Reveals information about ourselvesc. Is a minor aspect of communicationd. Helps to build relationships.
The correct option is (b) reveals information about ourselves. The physical environment (for example, our living spaces) that we, as individuals, create "reveals information about ourselves".
The physical environment can be used to reveal our thoughts, emotions and beliefs. It can also be used to reveal our hidden secrets and mysteries. To be effective in life, we must be aware of the physical environment in which we live.
This awareness can be used to our advantage or against us. For example, if we don't know the floor plan of our home, we may not be aware of the potential dangers that may lurk there. Likewise, we are less likely to respond appropriately to an uncomfortable situation when we are unaware of the emotions around us.
To know more about The physical environment:
brainly.com/question/1052995
#SPJ4
what length of a cylindrical piece of tungsten wire having a radius of 3.79 mm has a mass of 39.7 g? the density of tungsten is 19.25 g/cm3 and volume = πr2h.
The length of the tungsten wire is 13.7 cm.
To find the length of the tungsten wire, we need to first find its volume. We know the density of tungsten, which is 19.25 g/cm³, and the mass, which is 39.7 g. We can use the formula for the volume of a cylinder, which is πr²h, where r is the radius and h is the height (which is equal to the length of the wire in this case).
First, we'll find the volume:
V = πr²h
V = π (3.79 mm)²h
V = 11.05 mm³h
Next, we'll convert the volume to cubic centimeters (cm³):
11.05 mm³ = 11.05 x 10^-9 cm³
Now that we have the volume in cm³, we can use the density formula to find the mass:
m = ρV
m = 19.25 g/cm³ x 11.05 x 10^-9 cm³
m = 0.2103 g
Finally, we'll use the mass and density to find the length:
m = ρV
0.2103 g = 19.25 g/cm³ x V
V = 0.2103 g / 19.25 g/cm³
V = 0.0109 cm³
And since the volume is equal to πr²h, we can find the height (which is the length of the wire) by rearranging the formula:
V = πr²h
h = V / πr²
h = 0.0109 cm³ / π (3.79 mm)²
h = 13.7 cm
So the length of the tungsten wire is 13.7 cm.
To know more about length calculation here:
https://brainly.com/question/29084882#
#SPJ11
Our atmosphere developed as a result of volcanic eruptions, why aren't there higher traces of atmospheric carbon dioxide, one of the principal volcanic gases?
Large quantities of dust from the volcanic eruption's surrounds are released into the atmosphere. Materials like volcanic ash and gases also accompany eruptions.
These gases make a significant contribution to the atmospheric greenhouse gas inventory.
Volcanoes' explosivity during eruptions is mostly caused by the gases inside of them. A volcano might be more explosive the more gases it contains. There is a lot of carbon dioxide, methane, etc. in these gases. They are overwhelmingly greenhouse gases.
An eruption is also accompanied by dust particles. The wind has the ability to hang this particles for a long time in the sky.
For such more question on volcanic eruption's
https://brainly.com/question/25121802
#SPJ4
laser doppler flowmetry uses an infrared laser to measure blood flow velocity. compared to ultrasound, the percent change in frequency using this technique is: a. smaller. b. the same. c. larger. d. zero.
laser doppler flowmetry uses an infrared laser to measure blood flow velocity. compared to ultrasound, the percent change in frequency using this technique is a)smaller.
What is laser Doppler flowmetry?
Laser Doppler flowmetry (LDF) is a non-invasive method for the continuous measurement of microvascular blood perfusion in a variety of tissue types. Blood perfusion (blood flow) is estimated by illuminating a tissue sample with single-frequency light and processing the frequency distribution of the backscattered light.
What is the principle of Doppler flow meter?
A Doppler ultrasonic flow meter uses a transducer to emit an ultrasonic beam into the stream flowing through the pipe. For the flow meter to operate, there must be particulates, such as solid particles or air bubbles, in the stream to reflect the ultrasonic beam.
What wavelength is laser Doppler flowmetry?
In normal skin, and with laser Doppler instruments with a probe with standard fiber separation (0.25 mm) and 780 nm wavelength, the measuring depth is 0.5–1 mm and the measurement volume is approximately 1 mm3.
To know more about laser doppler flowmetry:
https://brainly.com/question/13153427
#SPJ4
According to Coulomb's law, charges of larger magnitude interact stronger than those of smaller magnitude. Is this true or false?
The given statement 'According to Coulomb's law, charges of larger magnitude interact stronger than those of smaller magnitude' is true.
"According to Coulomb’s law, the force of attraction or repulsion between two charged bodies is directly proportional to the product of their charges and inversely proportional to the square of the distance between them."
Mathematically, it is given as, F = 1/4π∈₀k (q₁q₂/d²)
where, ∈₀ is the permittivity of free space
k is relative permittivity
q₁, q₂ are charges
d is the distance
The law only applies to point charges that are at rest. It is difficult to implement Coulomb’s law where charges are in arbitrary shape because in such cases, we cannot determine the distance between the charges.
To know more about Coulomb's law:
https://brainly.com/question/14101045
#SPJ4
After some ancient bones were excavated, carbon was taken from one of the bones to find that there was 44% as much 14C as from current bones. The decay constant of 14C is k≈ 0.0001216, for time in years. How many years old is the bone?
The bones are 6751 years old.
We know that time of a reaction is given by:
kt = ln(A'/A)
where,
k = reaction constant = 0.0001216
A' = initial concentration
A = final concentration = 44% A = 0.44A
Putting these values in above equation we get:
t = ln(1/0.44)/ 0.0001216
= 6751 years
So, the bones are 6751 years old.
All radioactive reactions are first order reaction.
A first-order reaction is one in which the rate of reaction is proportional to the concentration of the reactant. To put it another way, doubling the concentration doubles the reaction rate. A first-order reaction can have one or two reactants, as in the case of the decomposition reaction.
To know more about decay visit:
https://brainly.com/question/14931535
#SPJ4
There are __________ paired and __________ unpaired electrons in the lewis symbol for a chlorine atom.
In the Lewis symbol for a chlorine atom, there are 2 paired and 3 unpaired electrons.
A Lewis symbol (also known as a Lewis dot diagram) is a way to represent an element in the periodic table by showing the number of valence electrons in the element. The Lewis symbol consists of the chemical symbol of the element surrounded by dots, where each dot represents a valence electron. The arrangement of dots around the symbol represents the electron configuration of the element in its neutral state. The number of valence electrons can be determined from the position of the element in the periodic table, and the arrangement of dots around the symbol helps to show the reactivity of the element and its ability to form chemical bonds with other elements.
Find out more about Lewis symbol
brainly.com/question/14617863
#SPJ4
How is a Tan function represented on a unit circle?
The tangent function can be represented on a unit circle by mapping an angle in the circle to the ratio of the y-coordinate to the x-coordinate of the point on the circumference that corresponds to that angle. This ratio is the required tangent of the given angle.
What is Tangent?
The tangent is a mathematical function that describes the ratio of the length of the side opposite a given angle in a right triangle to the length of the adjacent side. It is represented by the symbol "tan" and is defined for angles in trigonometry. It is used to describe relationships in mathematics, science, and engineering.
To learn more about tangent function, visit: https://brainly.com/question/1533811
#SPJ4
(a)what distance will the bicycle travel with one rotation of the wheels? give the exact distance and an approximation to the nearest tenth of an inc
The distance traveled by the bicycle in one rotation of the wheel is approximately 78.5 inches.
What do you mean by circumference?It is defined as the product of the diameter of the circle (the distance across the circle through its center) and π (pi), a mathematical constant approximately equal to 3.14. The formula for the circumference of a circle is:
C = 2πr
where r is the radius of the circle, which is half the length of the diameter.
The concept of circumference is used in many areas of mathematics and science, such as geometry, trigonometry, physics, and engineering. For example, in physics, the circumference of a wheel is used to calculate its rolling distance and the circumference of a pulley can be used to determine its mechanical advantage. In engineering, the circumference of a pipe or a cylinder is used in fluid mechanics to calculate the flow of liquids and gases.
The distance traveled by a bicycle in one rotation of the wheel can be calculated using the circumference of the wheel. The circumference of a circle is given by the formula:
C = 2πr
where C is the circumference, π is approximately equal to 3.14, and r is the radius of the circle. In this case, the radius of the wheel is equal to half the diameter, so:
r = 25 in / 2 = 12.5 in
Substituting this value into the formula for the circumference gives:
C = 2π * 12.5 in = 25π in
So, the distance traveled by the bicycle in one rotation of the wheel is approximately equal to 25π inches. To the nearest tenth of an inch, this distance is:
25π ≈ 78.5 in
So, the distance traveled by the bicycle in one rotation of the wheel is approximately 78.5 inches.
To know more about rotation visit:
https://brainly.com/question/24873428
#SPJ4
must two quantities have the same dimensions if you are adding them?
a. yes b. no
Yes, when ever you add or subtract quantities they must have the same units or dimensions.
ABOUT DIMENSIONIn physics measurements apart from units and units, there are also what are referred to as dimensions.
Definition dimensions in mathematics are measurements of length, width, or height that are extended in a certain direction. Where every form of matter on earth has dimensions, including physical quantities. Dimensions show what basic quantities are used in a measurement. Thus, dimensions in physics are a way of writing quantities that show the constituent quantities. Dimensions in measurements do not consider numerical values (quantities).
Learn more about dimension at
https://brainly.com/question/13143848
#SPJ4
what is the physical meaning of the slope physics pressure vs depth
The local fluid density is what the slope of the pressure versus depth graph in physics physically means.
According to fluid physics, a fluid's density and gravitational acceleration at a given depth are directly inversely related to that fluid's pressure. An illustration of this relationship can be seen as a pressure versus depth plot, where the slope of the line corresponds to the density of the local fluid. In other words, the fluid density is higher the steeper the slope is, and vice versa. Understanding the behaviour of fluids in different real-world applications, such as drilling for oil and gas in the ocean, depends on this relationship. One can determine the local fluid by measuring the depth and pressure.
Learn more about pressure here:
https://brainly.com/question/12971272
#SPJ4
a long, straight uniformly charged wire has a net charge per unit length of 1.95 coulombs/meter. what is the magnitude of the electric force in newtons exerted by this wire on a proton that is located a perpendicular distance 8.14 meters away from the wire?
The electric force exerted by the wire on a proton is 6.89 × 10⁻¹⁰ N.
Given,
Charge per unit length(λ) = 1.95 C/m
And perpendicular distance (r) = 8.14 m
We know that Force exerted by the wire on a charged particle is:
F = qE
Where [tex]E = \frac{\lambda}{2 \pi \epsilon_{0}r}[/tex] (Electric field of an infinitely thin wire)
and q = 1.6 × 10⁻¹⁹ C
So, [tex]F = \frac{q\lambda}{2\pi\epsilon_0r}[/tex]
[tex]\implies F = \frac{1.6 \times 10^{-19}\times 1.95}{2\pi\times 8.85 \times 10^{-12}\times 8.14}[/tex]
⇒ F = 6.89 × 10⁻¹⁰ N
Therefore the electric force exerted by the wire on a proton is 6.89 × 10⁻¹⁰ N.
Learn more about electric force here: https://brainly.com/question/25923373
#SPJ4
what are three new things that you learned about the milky way galaxy?
Three things learned about the Milky Way galaxy are that it has billions of stars, has a halo, is composed of dust and gas
Facts about the Milky Way galaxyThe galaxy is actually a collection of various kinds of stars with their respective solar systems. The Milky Way galaxy has a cost of about 200 to 400 billion stars. However, the most that humans see are only about 2,500 stars.
The Milky Way galaxy is composed of dust and gas. This material is the material that makes up the luminous material of the Milky Way Galaxy, which is about 10 to 15 percent. The thickness of this dust can deflect visible light. However, infrared light can pass through this dust.
The Milky Way Galaxy has a Halo, which is a halo of light within the Milky Way Galaxy.
Learn more about the Milky Way Galaxy at: brainly.com/question/2905713
#SPJ4
the gold medal winner in olympic downhill skiing manages to descend the course at 0.87c. how do they perceive the length of the course (in km), compared to the measurement of 3 km made by the organizers? show your work!
The gold medal winner in Olympic downhill skiing perceives the length of the course to be 4.1 km, compared to the measurement of 3 km made by the organizers.
The length of an object as perceived by an observer moving at a significant fraction of the speed of light (such as 0.87c) is affected by relativistic length contraction. According to the theory of special relativity, the length of an object measured by a stationary observer and by an observer moving at a significant fraction of the speed of light will differ. The length of the object as perceived by the moving observer is given by the Lorentz factor:
L = L0 / √(1 - v^2 / c^2)
where:
L is the length of the object as perceived by the moving observer
L0 is the length of the object as measured by a stationary observer
v is the velocity of the moving observer (0.87c)
c is the speed of light (3 x 10^8 m/s)
Plugging in the values:
L = 3 km / √(1 - (0.87c)^2 / c^2) = 3 km / √(1 - 0.7569) ≈ 4.1 km is the perceived length.
You can learn more about skiing at
https://brainly.com/question/17894622
#SPJ4
Study the graph shown below. It is a graph of velocity vs. time for Jonathan when he is working on a bicycle stunt.
What was his average acceleration during the third acceleration?
Group of answer choices
0.5 m/s2
0 m/s2
1.3 m/s2
−2.5 m/s2
Velocity can fluctuate in magnitude, direction, or both because it is a vector. Therefore, acceleration is a change in either direction or speed, or both.
What is Average acceleration?Cosmic rays are subatomic particles that have been accelerated to extremely high energies in active galactic nuclei and supernovas, which are massive stars that explode.
Understanding the mechanisms that accelerate cosmic rays is crucial because these rays contain extremely invasive radiation that can harm spacecraft electronics.
The same direction as the change in velocity is the one in which acceleration is a vector. Velocity can fluctuate in magnitude, direction, or both because it is a vector.
Therefore, Velocity can fluctuate in magnitude, direction, or both because it is a vector. Therefore, acceleration is a change in either direction or speed, or both.
To learn more about Velocity, refer to the link:
https://brainly.com/question/18084516
#SPJ1
why is the persistence method of forecasting limited?
Forecasting involves making predictions about the future. Forecasts are often predicated on historical data.
What is Forecasting?Because the future is uncertain, forecasts must often be revised, and actual results can vary greatly. Making future forecasts is a part of forecasting.
Companies utilize forecasting in finance to predict earnings or other statistics for upcoming periods. Forecasts are used by traders and analysts in value models, to time trades, and to spot trends.
Historical data is frequently the foundation of forecasts. Forecasts frequently need to be updated since the future is unpredictable, and actual outcomes can differ substantially.
Therefore, Forecasting involves making predictions about the future. Forecasts are often predicated on historical data.
To learn more about Forecasting, refer to the link:
https://brainly.com/question/30167588
#SPJ1
PLEASE HELP ME!!
Question in image.
The fill in the gap answer is given below:
From there, it is pumped to the lungs through two vessels called the pulmonary arteries.
These arteries are an exception to the rule since they carry oxygenated blood to the lungs.
Gas exchange occurs in the lungs at the alveoli.
Blood enters the left atrium of the heart.
Blood must be distributed to all of the body's cells (1). Oxygen first enters the body when inhale (2). Oxygen is carried by red blood cells (3). Deoxygenated blood travels through the vena cava (4) to the right atrium (5) of the heart. It first enters the right ventricle (6), and is pumped to the lungs for gas exchange (7), where oxygen is taken in and carbon dioxide is expelled. From there, it is pumped to the lungs (8) through two vessels called the pulmonary (9) arteries. 10 Oxygenated blood to the Body(11), 12 Gas exchange occurs in the lungs at the Alveoli 13, From the lungs, 14. oxygenated blood travels through the 15. pulmonary veins, and enters the 16. left side of the heart. This is also an exception to the rule as these veins carry 17. oxygenated blood to the heart. 18. Oxygenated blood first enters the 19. left atrium, then moves to the 20. left ventricle, Then it is pumped out through the aorta (21) onto the body (22) and distributed to the cells body (23).
What is blood?Blood is a bodily fluid that circulates through the circulatory system of an organism, carrying oxygen, nutrients, hormones, and waste products to and from the cells. Blood is made up of red and white blood cells, platelets, and plasma. Red blood cells are responsible for carrying oxygen, while white blood cells help the body fight infections and diseases.
Therefore, Platelets play a role in blood clotting, and plasma is the fluid portion of blood that contains proteins and other substances. Blood plays a vital role in maintaining the health and well-being of an organism.
Learn more about blood form
https://brainly.com/question/25149738
#SPJ1
See transcribed text below
Directions: Summarize how blood travels throughout the body using the following terms
and the sentence frames below. Each word should be used just once.
capillaries blood venacava left oxygen heart upper
eftatrium oxygenated lungs pulmonary right atrium deoxygenated
red blood cells inhale pulmonary right ventricle lungs lower Gas exchange
ventricle oxygenated aorta
1 must be distributed to 2l of the body's cells, Oxygen first
enters the body when | 2 Oxygenis carried by 3,
inthe 4. Deoxygenated blood travels through the inferior and superior
5 Itfirst enters the 6. . and is pumpedto the
T From there, it is pumped to the 8 through two vessels
called the 9. areries. These arteies are an exception to the rule
since they carry 10 bloodtothe
1 2 occurs inthe lungs at the 13,
From the lungs, 14. blood travels through the
15. veins, and enters the 16. side of the heart. This is also
an exception to the rule because these veins carry 17. bloodtothe
18, Oxygenated blood frstenters the 19, then moves to the left
2 Then itis pumped out through the 21 ontothe
2 and 23 body
A point charge 1.1 µC is located at the center
of a uniform ring having linear charge density
9.9 μC/m and radius 2.16 m.
9
R
a
Find the total electric flux through a sphere
centered at the point charge and having radius
Ra. The value of the permittivity of a
vacuum is 8.8542 x 10-12 C2/N. m².
Answer in units of Nm²/C. Answer in
units of Nm²/C.
The total electric flux through a sphere centered at the point charge is 1.24 x 10⁵ Nm²/C.
What is the total electric flux through the sphere?
The total electric flux through the sphere is the resultant of the electric field due to all the charges existing in the space, and the magnitude is calculated by applying the following formula.
Ф = ( Q ) / ( ε₀ )
where;
Q is the magnitude of the chargeε₀ is permittivity of free spaceФ = ( 1.1 x 10⁻⁶ ) / ( 8.8542 x 10⁻¹² )
Ф = 1.24 x 10⁵ Nm²/C
Learn more about electric flux here: https://brainly.com/question/26289097
#SPJ1
What is open circuit output?
Answer:
A circuit in which the continuity is broken due to which the electric current can not flow is known as the open circuit. In an open circuit, the current flowing is zero, thus no power dissipates from an open circuit.
Explanation:
You're welcome.
A unipolar output whose sole connection to a supply voltage is made by an active component, often a transistor, within the integrated circuit is termed as the open circuit output.
What is defined as the open circuit output?When the active device is turned on, the output voltage reaches the supply voltage to which it is connected (via into the active device);
because when device is turned off, the output impedance for any other integrated circuit terminal is high, and the output voltage is ascertained by external circuit that the output is connected.Output are typically categorized in accordance with the name of the active device component within in the integrated circuit to which they are attached, for example, open-collector output, expansive output, etc.
Thus, a unipolar output whose sole connection to a supply voltage is made by an active component, often a transistor, within the integrated circuit.
Know more about the open circuit output, here
https://brainly.com/question/14281430
#SPJ4
___is the ability to do work, have power or produce change.
Heat is the capacity to perform tasks, wield power, or effect change.
The vibrations of molecules or atoms increase as a body's temperature rises. From one area of the body to another, these vibrations are then transmitted. The amount of energy that a system's molecules vibrate with is referred to as its stored heat.
The flow of heat energy is in the direction of moving from a substance with a higher temperature to one with a lower temperature. This is due to the fact that faster-vibrating molecules pass their energy on to slower-vibrating ones.
Its heat content is another name for the vibrational energy. The body is either hot or cold depending on its level of heat. The body will become hotter as the heat content increases.
To know more about heat visit:
brainly.com/question/29391060
#SPJ4
If a negatively charged particle is placed at rest in an electric potential field that increases in the positive x-direction will the particle
A) accelerate in the positive x-direction
B) accelerate in the negative x-direction
C) remain at rest
If a negatively charged particle is placed at rest in an 'electric potential field' that increases in the positive x-direction then the particle will B: accelerate in the negative x-direction.
In an electric potential field, a negatively charged particle experiences a force in the direction of decreasing electric potential. The electric potential increases in the positive x-direction, meaning the electric potential decreases in the negative x-direction. Therefore, a negatively charged particle placed in this field will experience a force in the negative x-direction and thus accelerate in the negative x-direction.
You can learn more about electric potential field at
https://brainly.com/question/26978411
#SPJ4
what is the approximate period of the planet in days?
Earth's mean distance from the Sun is 1.495x108 kilometres, and its orbital period is 365 days. In 365.256 days (1 sidereal year), the Earth completes one orbit, covering 940 million kilometres (584 million mi).
One rotation of the Earth takes 24 hours, while that of Mars takes 25. The gas giants spin quite quickly. Jupiter's revolution takes only 10 hours to complete. Neptune takes 16 hours, Saturn 11 hours, and Uranus 17 hours. The length of time it takes an astronomical object to complete one orbit around another object is known as the orbital period (also known as the revolution period). In astronomy, it typically refers to bodies like planets or asteroids revolving about the Sun, as well as moons circling other stars, exoplanets, and double stars.
To learn more about distance click here https://brainly.com/question/29678788
#SPJ4
1. how long does it take light to travel from a. the moon to the earth? (data: earth-moon distance = 384,000 km) b. the sun to the earth? (data: earth-sun distance = 149,600,000 km)
The time taken by the light to travel from the moon to the earth is 1.28 s and from the sun to the earth is 499.01 s.
We know that, speed of light is constant everywhere.
Its value is 299,792,458 m/s.
Converting into km/s, we have,
⇒ 299,792,458/1000 = 299,792.458 km/s
As the distance between moon and earth is 384000 km.
The time taken by light to travel the above distance is,
⇒ 384000/299,792.458 = 1.28 s
The sun and the earth are separated by 149600000 kilometres.
The time taken by light to travel the above distance is,
⇒ 149600000/299,792.458 = 499.01 s
To know more about time:
https://brainly.com/question/30435516
#SPJ4
which domain of a typical it infrastructure includes cabling, servers, and wireless access points?
The domain of IT infrastructure that includes cabling, servers, and wireless access points is known as the Network Infrastructure domain. It is the backbone of the IT infrastructure and plays a crucial role in the efficient functioning of an organization's communication.
The Network Infrastructure domain involves the physical and logical connectivity of the various devices, computers, and servers within an organization. This includes the installation and maintenance of cables, such as Ethernet cables, which are used to connect devices to the network. The servers, on the other hand, are used to store and manage the data and applications required by the organization.
Wireless access points, which are also an important component of the Network Infrastructure domain, provide wireless connectivity to the devices within an organization. They are connected to the network using cables and act as a bridge between the wireless devices and the wired network. Wireless access points support the deployment of wireless networks, which are becoming increasingly popular due to the mobility and convenience they provide.
To learn more about Wireless here:
https://brainly.com/question/25633298#
#SPJ11