Answer:
THE ANSWER IS NEVER
Explanation:
TOOK TEST ONE EDENUITY. IF I HELPED PLEASE GIVE THE BRAINLYST
What is the central idea presented in this article?
Answer:
bruh moment,
one. u think imma flip my fing screen
two. u think imma help u fing cheat on a canvas assignment
expose this man
also,
college board is always watching
Why are people 16 to 18 years old discouraged from working full-time?
A. they cannot walk travel long distances
B. they have less experience
C. they are not strong enough
D. schoolwork should be their priority
Answer:
b. they have less experience
Explanation:
they might be stressed out from work
The people from 16 to 18 age-old discouraged from working full time because schoolwork should be their priority.
What is important for 16 to 18 old people?Study is the most essential thing for the people of the age 16 to 18,because studying will help them to pursue their career.
Working full time is not considered good for this age because this will impact their studies.
Thus, the correct option is D. schoolwork should be their priority.
Learn more about working full-time
https://brainly.com/question/14778649
#SPJ2
From Team Clock, Steve Ritter
We've all been a part of teams that have experienced failure. Whether it's the breaking of a romantic relationship, family estrangement, misunderstandings among
friends, or work-place tension, the ability for humans to not get along is obvious. Hopefully we learn from our mistakes and our wounds, but in the grand scheme of
things, it's safe to say some teams are just not meant to be.
In this paragraph, what does the word estrangement mean?
A)celebration
B)separation
C)forgiveness
D)happiness
In the given paragraph, estrangement means separation. The correct option is B.
What estrangement means?Someone who is alienated from their parents or legal guardians no longer communicates with them as a result of a serious breakdown in their connection (isolated instances of contact will be considered on a case by case basis).
The relatively new term "estrangement" is used to describe when family members separate physically and emotionally as a result of one member's decision to do so.
The recipient or recipients go through a variety of emotional reactions as a result. The strain of a distant connection is also felt by the initiator.
Misuse, neglect, betrayal, bullying, untreated mental illness, lack of support, destructive conduct, and substance abuse are some of the factors that can lead to estrangement. Estrangement refers to separation in the example paragraph.
Thus, the correct option is B.
For more details regarding estrangement, visit:
https://brainly.com/question/1478451
#SPJ2
explain how natural resources are identified and why natural resources are unevenly distributed. Be sure to use information from the reading to support your answer.
Answer:
Natural resources are obtained from nature and when it goes under people intervention.
Natural resources are resources derived from nature and used with minimal alteration.
What are Natural Resources?Natural resources are resources derived from nature and used with minimal alteration. This encompasses commercial and industrial utility, aesthetic value, scientific curiosity, and cultural significance.
Identification of Natural Resources:
Natural resources may be classified in a variety of ways, including where they originate from and whether or not they are renewable. Natural resources are called biotic if they are derived from living beings or organic materials. Plants, animals, and fossil fuels are examples of biotic resources.
Distribution of Natural Resources:
Throughout the world, resources are dispersed in various ways and in varying amounts. This unequal distribution, which is frequently the consequence of past geologic activities such as volcanic activity or tectonic upheaval, implies that different quantities of particular resources are only available to specific individuals.
Learn more about Natural Resources:
https://brainly.com/question/13954163
#SPJ2
Hook
Formation of Our Solar System Timeline
1. Look at the six statements below and put the events in order from beginning to
end.
2. Place the numbers 1 through 6 on the lines provided, 1 will be the beginning and
6 will be the end.
Somewhere in the Milky Way galaxy, a star went supernova. The explosion
transferred energy to a cloud of gas and dust that was nearby.
As the energy began to disturb the cloud of gas and dust, gravity caused the
cloud to collapse in on itself and form a disc.
The center of the disc became hot enough and under enough pressure to form a
star: the Sun.
The force of gravity began pulling the remaining gas and bits of dust together to
form planets and moons.
Near the Sun, the rocky planets of Mercury, Venus, Earth, and Mars formed.
In the outer cooler regions of the disc, the ice and gas planets of Jupiter, Saturn.
Uranus, and Neptune formed.
Answer:
Somewhere in the Milky Way galaxy, a star went supernova. The explosion transferred energy to a cloud of gas and dust that was nearby. As the energy began to disturb the cloud of gas and dust, gravity caused the cloud to collapse in on itself and form a disc. The center of the disc became hot enough and under enough pressure to form a star: the Sun. The force of gravity began pulling the remaining gas and bits of dust together to form planets and moons. Near the Sun, the rocky planets of Mercury, Venus, Earth, and Mars formed. In the outer cooler regions of the disc, the ice and gas planets of Jupiter, Saturn, Uranus, and Neptune formed.Explanation:
The question above refers to the origin of the solar system.
This system was created from a supernova, which generated an extensive cloud of dust and gas that was constantly rotating within itself. This gas cloud received great energy from the explosion to create the super nova. This energy added to the weight of the cloud itself, caused the cloud to flatten and take the form of a disk. The center of that disk was under such great pressure and temperature that it reacted and formed the sun.
Around the center of the disk, there were several pieces of solid material, which have been clumping with time over bodies, these bodies formed the moons and the planet.
As you may already know, the hottest planets are those that are closest to the sun and that have rocky composition, they are: Mercury, Venus, Earth and Mars.
On the other hand, the most distant clusters of the sun formed planets of gaseous composition which are: Jupiter, Saturn, Uranus and Neptune.
Our Sun is an "average" star. What's its stellar evolution
A. Red giant, Planetary Nebula, White Dwarf
B. Red Supergiant, Supernova, Black Hole or Neutron st
Answer:a
Explanation:
I will give brainliest if you get this right.
Answer:
5 cm
Explanation:
First, let's find the perimeter of the rectangle.
The perimeter of a rectangle is:
p=2l+2w
In this rectangle, we know that the length is 7 centimetres and the width is 3 centimetres.Therefore, we can substitute 7 in for l and 3 for w.
p=2(7)+2(3)
Multiply 2 and 7
p=14+2(3)
Multiply 2 and 3
p=14+6
Add 14 and 6
p=20
We know the perimeter of the rectangle is 20 centimeters. We also know that the perimeter of the square is equal to the perimeter of the rectangle.
The perimeter of a square is:
p=s+s+s+s or p=4s
We know that the perimeter of the square is equal to the rectangle. The rectangle's perimeter is 20. Therefore, we can substitute 20 in for p.
20=4s
Now, we want to find what the side length is. We have to get s by itself. 4 and s are being multiplied. To reverse this, divide both sides by 4.
20/4=4s/4
20/4=s
5=s
The side length of the square is 5 centimeters.
Perimeter of rectangle=2(l+w)
Perimeter of rectangle=2(7 cm + 3 cm)
Perimeter of rectangle=2(10 cm)=20 cm
Perimeter of rectangle=Perimeter of square
20 cm=4×l
20 cm : 4=l
5 cm=l
So, the length of the square is 5 cm.
Thank you.
Air pollution resulting from the combination of gases produced by burning fossil fuels is called __________.
A) acid rain
B) smog
C) chimney effect
D) environmental tobacco smoke
E) weathering
Answer:
The answer to the question is smoke
Correct answer gets brainliest :) Please help with my homework:)
Answer:
A) 30 cm
B) 20 cm
Explanation:
For the perimeter of rectangle B, I just imagined there was a cut horizontally through the middle. The length would be 5, since its half, and the width would be the same (10) because folding it into a rectangle only changes its length.
I added it up : 5+5+10+10= 30 cm
Rectangle B is 30 cm
For the perimeter of square C, you folded it again to make the width decrease by 5cm , so all the sides were 5cm.
5+5+5+5=20 cm
Square C is 20 cm
HELP PLEASE
Which of the following is not a market failure?
a. A lack of competition in some markets.
b. Prices determined in competitive markets, which consumers, as individuals, have no control over.
c. The presence of externalities in some markets.
d. A lack of public goods desired by a majority of citizens.
Answer: a
Explanation: competition is a bad thing. Since their is no competition is benefiting not failing.
The ____ summarizes all of the information you submitted on the FAFSA.
A. student aid report (SAR)
B. pell grant
C. annual percentage rate (APR)
D. jennings report
Answer:
a student aid report
Explanation:
Landen Corporation uses a job-order costing system. At the beginning of the year, the company made the following estimates:
Direct labor-hours required to support estimated production 75,000
Machine-hours required to support estimated production 37,500
Fixed manufacturing overhead cost $ 225,000
Variable manufacturing overhead cost per direct labor-hour $ 1.60
Variable manufacturing overhead cost per machine-hour $ 3.20
During the year, Job 550 was started and completed. The following information is available with respect to this job:
Direct materials $ 178
Direct labor cost $ 225
Direct labor-hours 15
Machine-hours 5
Required:
1. Assume that Landen has historically used a plantwide predetermined overhead rate with direct labor-hours as the allocation base. Under this approach:
a. Compute the plantwide predetermined overhead rate.
b. Compute the total manufacturing cost of Job 550.
c. If Landen uses a markup percentage of 200% of its total manufacturing cost, what selling price would it establish for Job 550?
2. Assume that Landen’s controller believes that machine-hours is a better allocation base than direct labor-hours. Under this approach:
a. Compute the plantwide predetermined overhead rate.
b. Compute the total manufacturing cost of Job 550.
c. If Landen uses a markup percentage of 200% of its total manufacturing cost, what selling price would it establish for Job 550?
(Round your intermediate calculations to 2 decimal places. Round your Predetermined Overhead Rate answers to 2 decimal places and all other answers to the nearest whole dollar.)
The plantwide predetermined overhead rate is $345,000 and the total manufacturing cost of Job 550 is $472.
Plantwide predetermined overhead rate1.
a. The estimated total overhead cost:
Estimated fixed manufacturing overhead $ 225,000
Estimated variable manufacturing overhead 120,000
($1.60per DLH × 75,000 DLH)
Estimated total manufacturing overhead cost $345,000
The predetermined overhead rate:
Estimated total manufacturing overhead (a) $ 345,000
Estimated total direct labor-hours (b) 75,000 DLH
Predetermined overhead rate (a) ÷ (b) $4.60 per DLH
b. Total manufacturing cost assigned to Job 550:
Direct materials $ 178
Direct labor $225
Manufacturing overhead applied $69
($4.60 per DLH × 15DLA)
Total manufacturing cost of Job 550 $472
c. The selling price for Job 550:
Job 550
Total manufacturing cost $472
Markup (200%) $944
Selling price $1,416
2.
a. The estimated total overhead cost
Estimated fixed manufacturing overhead $ 225,000
Estimated variable manufacturing overhead $120,000
($3.20 per MH × 37,500 MHs)
Estimated total manufacturing overhead cost $345,000
Predetermined overhead rate:
Estimated total manufacturing overhead (a) $345,000
Estimated total machine-hours (b) 37,500 MHs
Predetermined overhead rate (a) ÷ (b) $9.20 per MH
b. Total manufacturing cost assigned to Job 550:
Direct materials $ 178
Direct labor 225
Manufacturing overhead applied $46
($9.20per MH × 5 MH)
Total manufacturing cost of Job 550 $449
2.
c. The selling price for Job 550:
Job 550
Total manufacturing cost $ 449
Markup (200%) $898
Selling price $1,347
Therefore the plantwide predetermined overhead rate is $345,000 and the total manufacturing cost of Job 550 is $472.
Learn more about Plantwide predetermined overhead rate here:https://brainly.com/question/26299455
#SPJ9
What is the smartest way to learn
needed ASAP
Instructions
Why would you prefer a belt drive to a chain drive?
The Circle of Growth
A)shows all the things you have learned through your goals
B)represents the things you cannot yet do
C)brings your goals together so you can focus on them
D)encourages others to help you meet your goals
Answer: B
Explanation:
Help needed, will give brainliest if it’s correct.
Answer:
C,B
Explanation:
C,B are polygons
Answer:the answer is c
Explanation:the reason the answer is c is because its a polygon and a polygon is a plane figure with at least three straight sides and angles, and typically five or more.and c represents that
The process of removing small solid objects, like dust, from the air is called __________.
A) particulate control
B) reclamation
C) evapotranspiration
D) infiltration
E) sublimation
The time of warming that occurs between ice ages is called the __________.
A) global climate
B) interglacial period
C) R-to-C ratio
D) reclamation
E) continental drift
Answer:B (I am not sure)
Explanation:
The cold periods are called glacials (ice covering) and the warm periods are called interglacials. There were at least 17 cycles between glacial and interglacial periods.
High Desert Potteryworks makes a variety of pottery products that it sells to retailers. The company uses a job-order costing system in which departmental predetermined overhead rates are used to apply manufacturing overhead cost to jobs. The predetermined overhead rate in the Molding Department is based on machine-hours, and the rate in the Painting Department is based on direct labor-hours. At the beginning of the year, the company provided the following estimates:
Department
Molding Painting
Direct labor-hours 30,000 54,200
Machine-hours 88,000 36,000
Fixed manufacturing overhead cost $ 228,800 $ 514,900
Variable manufacturing overhead per machine-hour $ 2.60 -
Variable manufacturing overhead per direct labor-hour - $ 4.60
Job 205 was started on August 1 and completed on August 10. The company's cost records show the following information concerning the job:
Department
Molding Painting
Direct labor-hours 82 133
Machine-hours 380 72
Direct materials $ 938 $ 1,240
Direct labor cost $ 730 $ 1,010
Required:
1. Compute the predetermined overhead rates used in the Molding Department and the Painting Department.
2. Compute the total overhead cost applied to Job 205.
3-a. What would be the total manufacturing cost recorded for Job 205?
3-b. If the job contained 37 units, what would be the unit product cost?
Answer:
i think the answer is
Explanation:Molding department rate = (134400/84000+3.20)
= 4.80 per MH
Painting department rate = (516560/58700+5.20) = 14 per DLH
2) Total overhead cost = (380*4.8+14*132) = 3672
3) Total Job Cost
Molding Painting Total
Direct material 938 1200 2138
Direct labor 730 980 1710
Overhead 1824 1848 3672
Total 3492 4028 7520
4) Unit product cost = 7520/39 = 192.82
Even tho this was 1 year ago oh well
The GDP of a country hasnt improved in the past three years. The central bank decided to take a measure that will increase the amount of money people sped on goods and service. Which step should the central bank take?
Answer:
college board is always watching be aware
Explanation:
He’ll help
Help help
Before 11:50 easy way
Answer:
14/8
Explanation:
Describe how atmospheric pressure changes as altitude increases?