Is XeF2 a polar or nonpolar compound?

One mole of acetic anhydride reacts with one mole of salicylic acid to give one mole of aspirin. Then, 9.8 g of salicylic acid will give 12.7 g of aspirin.

Aspirin is used as an analgesic in medicines. It is acetyl salicylic acid formed by the reaction of salicylic acid and acetyl anhydride.

The theoretical yield of a reaction is  determine from the balanced chemical equation of the reaction. The actual yield might be lower than  the theoretical yield.

One mole of salicylic acid reacts to give one mole of the product aspirin.

molar mass of salicylic acid  = 138.12 g/mol

molar mass of aspirin = 180.16 g/mol

then mass of aspirin produced from 9.8 g of salicylic acid is :

(9.8 × 180.16)/138.12 = 12.7 g.

Therefore, the theoretical yield of the reaction is 12.7 g.

Find more on theoretical yield :

https://brainly.com/question/2506978

#SPJ1

If nacl solution is prepared by dissolving 90.0 g nacl in 250.0 g of water at 25°c.  The vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr . the closest  is option  A. 21.21 torr

To calculate the vapor pressure of the solution, we need to use Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent in the solution. The equation for Raoult's law is:

P = X_solvent * P°_solvent

where:

P is the vapor pressure of the solution,

X_solvent is the mole fraction of the solvent (in this case, water),

P°_solvent is the vapor pressure of the pure solvent (in this case, water).

We can first calculate the mole fraction of water in the solution as follows:

Moles of water = mass of water / molar mass of water

= 250.0 g / 18.015 g/mol

= 13.87 mol

Moles of NaCl = mass of NaCl / molar mass of NaCl

= 90.0 g / 58.44 g/mol

= 1.539 mol

Total moles = moles of water + moles of NaCl

= 13.87 mol + 1.539 mol

= 15.41 mol

The mole fraction of water is then:

X_water = moles of water / total moles

= 13.87 mol / 15.41 mol

= 0.899

Using Raoult's law and the given vapor pressure of water at 25°C (P°_water = 23.56 torr), we can calculate the vapor pressure of the solution as:

P = X_water * P°_water

= 0.899 * 23.56 torr

= 21.14 torr

Therefore, the vapor pressure of the solution is 21.14 torr, which is closest to option A, 21.21 torr.

Learn more about vapour pressure here:

https://brainly.com/question/2693029

#SPJ4

Hydrogen chloride  HCl has a molecular weight of 36.458.

HCl has a molecular weight of 1.008 plus 35.45.

To find the molecular weight of HCl (hydrogen chloride), you need to know the atomic masses of hydrogen (H) and chlorine (Cl), and then sum them up according to the chemical formula of HCl.

The atomic mass of hydrogen is approximately 1.008, and the atomic mass of chlorine is approximately 35.45. The molecular formula of HCl is H1Cl1, which means it contains one atom of hydrogen and one atom of chlorine.

To find the molecular weight of HCl, you can add the atomic masses of hydrogen and chlorine:

1) Molecular weight of HCl = Atomic mass of hydrogen + Atomic mass of chlorine

2) Molecular weight of HCl = 1.008 + 35.45

3) Molecular weight of HCl = 36.458

The molecular weight of HCl is approximately 36.458 g/mol.

To learn more about  Hydrogen chloride :

https://brainly.com/question/19053776

#SPJ4

When drawing a Fischer projection of a sugar, the aldehyde or ketone functional group is usually placed at the top of the vertical line. This is because Fischer projections are usually drawn for carbohydrates in their open-chain form, which contains a carbonyl group (aldehyde or ketone). The aldehyde or ketone group is placed at the top of the vertical line, and the carbon chain is then drawn extending downwards.

If the sugar is a aldose (a sugar with an aldehyde group), the aldehyde group is placed at the top of the vertical line. If it is a ketose (a sugar with a ketone group), the ketone group is placed at the top of the vertical line. The hydroxyl groups (-OH) are then placed on the horizontal lines, either projecting towards or away from the viewer, depending on their stereochemistry.

To learn more about Fischer projection refer to:

brainly.com/question/29615238

#SPJ4

Alkali metals exhibit the lowest first ionization energy.

Alkali metals are a group of elements. Their standard valence shell setup is ns1. Sodium (Na), Potassium (K), Rubidium (Rb), Cesium (Cs), Lithium (Li), Hydrogen (H), and Lithium are some of them (Cs).

The alkali metal with the lowest ionization energy is cesium.

Ionization energy is the energy required to remove an electron from a neutral atom or a positive ion. It is a measure of the tendency of an atom or ion to lose an electron and become a cation. The ionization energy is usually expressed in units of electron volts (eV) or kilojoules per mole (kJ/mol). The first ionization energy is the energy required to remove the outermost electron from an atom in its ground state, while the second ionization energy is the energy required to remove the second outermost electron, and so on. Generally, the ionization energy increases as we move across a period in the periodic table, and decreases as we move down a group. This is because as we move across a period, the effective nuclear charge increases, which makes it more difficult to remove an electron from the outermost shell.

To learn more about the ionization energy, click the given link ;

brainly.com/question/20658080

#SPJ4

When naming ionic compounds, there are several rules that should be followed. Here are three important rules to remember:

1) Use the name of the cation first

2) Use the correct suffix for the anion

3) Use Roman numerals to indicate the charge of the cation

1) Use the name of the cation first: In an ionic compound, the name of the cation comes first, followed by the name of the anion. For example, in the compound NaCl, the cation is sodium and the anion is chloride.

2) Use the correct suffix for the anion: The suffix for the anion depends on its charge. For example, if the anion has a single negative charge, the suffix is "-ide". So, chloride becomes chloride ion (Cl-) and sulfide becomes sulfide ion (S2-).

3) Use Roman numerals to indicate the charge of the cation: If the cation can have multiple charges, the charge must be specified using a Roman numeral in parentheses. For example, iron (III)  chloride (FeCl3) indicates that the iron cation has a +3 charge. The Roman numeral is equal to the charge of the cation.

To learn more about  ionic  compounds :

https://brainly.com/question/3222171

#SPJ4

Answer:

limiting reagent is used to describe the substance that is totally consumed in a chemical reaction

The given statement is true. The rate limiting step in a reaction is the slowest step in the reaction sequence.

In chemical kinetics, the slowest step, sometimes referred to as the rate-determining step or rate-limiting step, frequently roughly determines the total pace of a reaction.

The reaction's slowest step is used to generate the rate equation. Writing rate equals the rate constant of the slowest step times the concentrations of the reactant or reactants raised to their reaction order is how you build up a rate equation.

2A + B → C + D using the following two stages, the first step is referred to as the rate-determining step of the reaction since the total rate of the reaction is equal to the rate of the slow first step. The rate of the reaction in the aforementioned equation depends on the rate constant k.

Learn more about rate limiting step here brainly.com/question/14923179

#SPJ4

The sodium ion (Na+) is ionically bonded to the carboxylate group of benzoic acid, replacing the hydrogen ion (H+) in the carboxylic acid group

When benzoic acid is treated with aqueous sodium hydroxide, it undergoes a base-catalyzed reaction known as saponification. The products of this reaction are sodium benzoate and water. The balanced chemical equation for this reaction is:

C6H5COOH + NaOH → C6H5COONa + H2O

In this equation, NaOH is the sodium hydroxide and C6H5COOH is the benzoic acid. The product, C6H5COONa, is sodium benzoate, which is a white crystalline powder that is soluble in water.

The structure of sodium benzoate can be represented as follows:

O

||

-C-O-Na+

||

C

The sodium ion (Na+) is ionically bonded to the carboxylate group of benzoic acid, replacing the hydrogen ion (H+) in the carboxylic acid group. The resulting compound, sodium benzoate, is a salt that is more soluble in water than the original benzoic acid, which is sparingly soluble in water.

For such more questions on Aqueous

https://brainly.com/question/19587902

#SPJ4

No. Adding NaOH did not change the identity of the NaCl. (option b). When NaOH (sodium hydroxide) is added to an aqueous solution of NaCl (sodium chloride), a chemical reaction occurs, which is called a neutralization reaction.

This reaction forms NaCl (sodium chloride) and H2O (water) as the end products. The chemical equation for this reaction can be represented as follows:

As we can see from this equation, NaCl is not changed and remains in its original form, only the OH- ions from NaOH react with the H+ ions from HCl to form water. Therefore, the identity of NaCl remains unchanged even after the addition of NaOH solution.

Learn more about Aqueous Solution:

https://brainly.com/question/19587902

#SPJ4

The pressure exerted by the individual gases in a mixture is called the partial pressure. Here the equilibrium partial pressure of PCl₅ is 0.038 , PCl₃ is 0.662 and Cl₂ is 0.662.

The ratio of the product of molar concentrations of the products to that of the reactants with each concentration term raised to a power equal to its coefficient in the balanced chemical equation is the equilibrium constant.

In terms of partial pressures, equilibrium constant Kp is:

Qp = pPCl₅ / (pPCl₃ ) (pCl₂)

= 0.20 / 0.5 × 0.5

= 0.8

Here Qp > Kp, so the reaction shift towards reactant side.

The ICE table is:

          PCl₃ + Cl₂ ⇄  PCl₅

I         0.50    0.50     0.20

C        +x         +x         -x

E  0.50 + x   0.50 + x  0.20 - x

Kp = 0.200 -x / (0.5+x)(0.5+x)

0.0870 = 0.200 -x / (0.5+x)(0.5+x)

x = 0.162

The equilibrium partial pressures of PCl₃ and Cl₂ are:

0.5 + x = 0.5 + 0.162 = 0.662 atm

The equilibrium partial pressures of PCl₅ is:

0.200 - 0.162 = 0.038 atm

Thus the equilibrium partial pressures of PCl₃ , PCl₅ and Cl₂ are determined.

To know more about equilibrium constant, visit;

https://brainly.com/question/30620209

#SPJ1

The presence of atoms provides an explanation for the conservation of matter since they are the smallest units of matter that nevertheless retain the chemical characteristics of the element they represent.

Atoms can only be rearranged into different combinations to produce new compounds because they are indivisible and cannot be created or destroyed.

The law of conservation of matter, which asserts that the overall amount of matter in a closed system stays constant even when individual atoms and molecules may be rearranged by chemical interactions, is based on the concept of indestructible atoms.

In other words, a system has the same number of atoms both before and after a chemical reaction, and its overall mass is constant. The law of conservation of matter holds true for all chemical reactions, which is made possible by the fact that atoms are indivisible and cannot be generated or destroyed.

Want to know more about atoms visit the link which is given below;

https://brainly.com/question/13981855

#SPJ4

Answer:

A circular iron rod with a clamp for use on a ring stand.

Explanation:

An iron ring is a circular iron rod that has a clamp that can be used to mount it on a ring stand.  The iron ring serves to hold glassware, such as a flask, so that the glassware will not tip over, and is usually employed when the glassware may need to be heated, such as a Bunsen burner that can be placed underneath.

The mass of 2.80 moles of H2O is approximately 50.441 grams.

Molar mass is the mass of one mole of a substance and is expressed in units of grams per mole (g/mol). It is calculated by summing the atomic masses of all the atoms in a molecule, and it is expressed in the same units as atomic mass, which is atomic mass units (amu).

The molar mass of water (H2O) is 18.01528 g/mol (2 hydrogen atoms with atomic mass 1.008 and 1 oxygen atom with atomic mass 15.999).

To find the mass of 2.80 moles of H2O, we can use the following formula:

mass = number of moles x molar mass

Plugging in the values, we get:

mass = 2.80 mol x 18.01528 g/mol

mass = 50.441 g

Therefore, the mass of 2.80 moles of H2O is approximately 50.441 grams.

Learn more about  molar mass here : brainly.com/question/22503632

#SPJ1

If the reaction has a 87% yield, then it will produce 1392 grams of CO₂.

The limiting reactant, also known as the limiting reagent, is a substance in a chemical reaction that is fully consumed before the other reactants and determines the maximum amount of product that can be formed. In a reaction mixture, the limiting reactant is the one that runs out first and therefore limits the amount of product that can be formed.

The amount of limiting reactant in a reaction determines the amount of product that can be formed, and the amount of other reactants will be left over. If the reaction yields 87%, it will generate 1600 x 87% = 1392 grams of CO2.

Learn more on limiting reactants here: https://brainly.com/question/14222359

#SPJ1

BCl₃ has covalent bonds.

BCl₃ is a compound composed of one boron atom and three chlorine atoms. In this molecule, each atom shares electrons with the other atoms to form covalent bonds. A covalent bond is a type of chemical bond formed by the sharing of electrons between two or more atoms.

In BCl3, the boron atom shares three of its valence electrons with three chlorine atoms, forming three covalent bonds. Each chlorine atom shares one of its valence electrons with the boron atom, completing the octet and forming a stable molecule. Therefore, BCl₃ is a covalent molecule with covalent bonds between boron and chlorine atoms.

To know more about the covalent bonds, here

brainly.com/question/19382448

#SPJ4

Homogeneous is a term used to describe a mixture or substance that is uniform in composition and properties throughout.

In other words, it is a mixture or substance that has the same appearance and consistency throughout its entirety. This is in contrast to a heterogeneous mixture or substance, which has different compositions and properties in different parts of the mixture or substance.

An example of a homogeneous mixture is a solution of salt and water, where the salt is uniformly distributed throughout the water. An example of a heterogeneous mixture is a bowl of cereal, where there are different types of cereal and pieces of fruit mixed together.

Homogeneous mixtures and substances are easier to work with in scientific experiments and industrial processes, as they have predictable and consistent properties.

To know more about Homogeneous here:

https://brainly.com/question/30583932#

#SPJ11

The empirical formula for a compound with a molecular formula of C₆H₉N₃O₃.

Empirical formula of a compound is defined as the simplest whole number ratio of atoms which are present in a compound.It does not make any mention of the arrangement of atoms or the number of atoms. The empirical formula gives information about the ratio of number of atoms which are present in a compound.

Molecular formula is determined from the empirical formula by dividing the molar mass of a compound by the empirical formula mass. The resultant which should be a whole number or very close to the whole number , then the subscripts are multiplied by the whole number to get the molecular formula.The mentioned empirical formula is obtained by dividing molecular formula by 2.The empirical formula is obtained as , molecular formula/2=C₁₂H₁₈N₆O₆/2=C₆H₉N₃O₃

Learn more about empirical formula,here:

https://brainly.com/question/14044066

#SPJ9

When the common pair of electrons between the two molecules is not at an equal distance, the covalent bond compound is said to be polar.

The difference in electronegativity between the two elements must be between 0.5 and 1.6 for a bond to be polar. The bond is nonpolar if the difference in electronegativity is smaller than 0.5. If the ratio is more than 1.6, the molecules instead form charged ions and ionic bonds. We will also be aware of it. The molecule is nonpolar if the arrangement is symmetrical and the lengths of the arrows are equal. The molecule is unstable if the arrows have various lengths and do not balance one another.

To know more about Polar molecule, visit,

https://brainly.com/question/1433127

#SPJ4

Erosion is the process through which the earth's surface wears away. Erosion is a process that lowers the surface. And the process of deposition, which is the collection of materials transported by streams and slopes, rebuilds the surface.

Earthen materials are worn away during erosion, a geological process in which they are moved by wind or water. Weathering, a related process that does not involve movement, dissolves or breaks down rock.

Inside a medium-sized pan, panning employs water to separate heavy gold particles from other lighter ones. In this procedure, water and sediment or ore presumed to contain gold are added to a large, curved pan. In order to discharge lighter sediments, the miner moves the pan repeatedly.

Thus, In streams and rivers, it has increased pollution and sedimentation, blocking these waterways and resulting in a loss in fish and other species.

To learn more about the erosion, follow the link;

https://brainly.com/question/30587260

#SPJ9

The molarity of C29H60 in summer rainwater collected in Hannover, Germany, is 0.000034 M, or 34 nM.

To convert from parts per billion (ppb) to molarity, we need to know the number of moles of C29H60 present in a given volume of rainwater. We can use the concentration in ppb and the volume of the rainwater to calculate the number of moles of C29H60.

Rearranging this equation, we can calculate the number of moles of solute:

Since 1 ppb is equal to 1 g/L, the number of moles can also be calculated using the mass of C29H60 and its molecular weight:

The molarity of the solution is then given by:

We can now convert this molarity to nano molarity (nM) by multiplying by 10^9:

So the molarity of C29H60 in summer rainwater collected in Hannover, Germany, is 0.000034 M, or 34 nM.

Learn more about Molarity:

https://brainly.com/question/17138838

#SPJ4

Answer:

30.5 Hz

Explanation:

Speed of sound = wavelength x frequency
                       61 = 2m x Frequency(Hz)

                       
Frequency = 61/2
                  = 30.5 Hz

Hope it helps ;)

HgO is the limiting reactant. Cl[tex]_2[/tex] is the excess reactant. The limiting reactant, also known as the limiting reagent.

In a chemical reaction, the limiting reactant, also known as the limiting reagent, controls how much product is produced. Calculating the theoretical yield of such a reaction is achievable if the limiting reactant has been identified.

Because elements and compounds in a balanced chemical system react in accordance with their mole ratios, there must be a limiting reactant.

HgO + 2Cl[tex]_2[/tex] →HgCl[tex]_2[/tex] + Cl[tex]_2[/tex]O

moles of HgO =11.50/ 216.5=0.05moles

moles of Cl[tex]_2[/tex] =12.46/70.9=0.17moles

To find the limiting reactant, divide the moles by stoichiometry. HgO is the limiting reactant. Cl[tex]_2[/tex] is the excess reactant.

Therefore, HgO is the limiting reactant. Cl[tex]_2[/tex] is the excess reactant.

To know more about limiting reactant, here:

https://brainly.com/question/28945068

#SPJ1

The group 18 in the periodic table is the noble gases. The elements are The elements are helium , neon , argon, krypton, xenon, radon, and oganesson.

The group 18 group belongs to the noble gases in the periodic table and the elements belongs to the group 18 is as follows :

The Group 18 is also called as the zero group because the  elements belongs to this group have the zero valency or the tendency to react with other elements also is zero. That means they are chemically unreactive and they are the most stable elements in the periodic table.

To learn more about periodic table here

https://brainly.com/question/11155928

#SPJ4

One type of hydrogen atom is represented by each distinct signal in a 1-H NMR spectrum. The signal is the same for equivalent hydrogen atoms.

In physics, a spectrum is a distribution of some physical quantity as a function of a variable, such as frequency, wavelength, or energy. The term "spectrum" is commonly used to describe the range of colors of visible light, which is known as the visible spectrum and includes all the colors of the rainbow. However, spectra can also refer to other forms of radiation, such as the electromagnetic spectrum, which includes radio waves, microwaves, infrared radiation, ultraviolet radiation, X-rays, and gamma rays. Spectra can be used to identify and study the properties of matter, such as the chemical composition of a substance, the temperature of a hot object, or the motion of a distant star. Spectroscopy is the scientific field that deals with the analysis of spectra and are widely used in many areas of science and technology.

Learn more about spectrum here:

https://brainly.com/question/28898105

#SPJ4

The actual volume of water measured out is 10.012 mL.

To determine the actual volume of water, we can use the density formula: density = mass/volume.

Rearranging the formula to solve for volume, we get: volume = mass/density.

Plugging in the given values, we get:

volume = 9.990 g / 0.9978 g/mL = 10.012 mL.

Therefore, the actual volume measured out is slightly greater than the nominal volume of 10 mL, likely due to the meniscus formed by the water at the top of the pipet. This highlights the importance of proper measurement techniques and accounting for sources of error in experimental measurements.

You can learn more about volume of water at

https://brainly.com/question/4895505

#SPJ4

After, after 12 hours, we would anticipate roughly 27 mutations to be present in the S. aureus population in your foot wound.

Part 1-

First, the size of the S. aureus population in the wound in your foot should be found. Let's assume that the population size is 1 million (1 x 10^6) cells.

The  mutations estimated in one generation per cell are:

1 mutation per 10¹⁰base pairs

The base pairs in the genome of S. aureus are 2.8 x 10⁶

Therefore, the expected number of mutations per generation per cell is:

(2.8 x [tex]10^{6}[/tex]) / ([tex]10^{10}[/tex]) = 2.8 x [tex]10^{-4}[/tex] mutations per cell per generation

To estimate the number of mutations in the population which occur after 12 hours the number of generations that have passed needs to be known. The generation time of  S. aureus is approximately 30 minutes, so the number of generations in 12 hrs (hours) will be:

12 hrs x (60 minutes/hr) / (30 minutes/generation)

= 24x4 equals 96 generations

In 96 generations the approximate number of mutations per cell is:

96 generations x 2.8 x [tex]10^{-4}[/tex] mutations per cell per generation

= 0.027 mutations per cell

If we multiply mutations per cell by the number of cells in the population, to know the total number of mutations in the population:

i.e.,0.027 mutations taking place per cell x 1 x 10⁶ cells gives 27 mutations

Therefore, after 12 hours, we can expect approximately 27 mutations to be present in the population of S. aureus inside the wound in your foot.

Estimatedly, 0.0028 mutations will take place per cell in the population. After the end of 12 hours, 0.0028 * 16,777,216 = 46,976 new mutations will exist.

Part 2-

The implications of this genetic diversity in the context of treating possible infections is that host genetic diversity is thought to reduce the possibility that the disease will widen in natural populations.

To know more about mutations,

brainly.com/question/14438201

#SP J4

The number of atoms in 3 moles K of the particle is 1.806 x 10²⁴ atoms.

The value of one mole of an atom is equal to exactly 12 grams of pure carbon-12.

12.00 g (C-12 ) = 1 mol C-12 atoms = 6.02 × 10²³ atoms .

The number of particles in 1 mole is called Avogadro's Number (6.0221421 x 10²³).

The number of atoms in 3 moles K of the particle is calculated as follows;

= 3 moles  x   6.02 × 10²³ atoms / mol

= 1.806 x 10²⁴ atoms

Learn more about number of atoms here: https://brainly.com/question/6258301

#SPJ1

The magnitude of the y-component of the electric field in this region exists 1.3 V/cm.

The measurement or absolute value of an amount is known as a magnitude. Positive real numbers are used to express magnitudes. The size of some quantity is known as its magnitude, to put it simply.

A seismic event's magnitude is its numerical value. It is a particular value independent of the epicentre's location or direction.

One cannot have a negative magnitude. The part of the vector's length that lacks direction is its length (positive or negative). The values in the summation are squared in the formula and are therefore positive.

Since [tex]V_1[/tex] exists 1.3 V at position [tex]y_1[/tex] = 26 cm. At position [tex]y_2[/tex] = 28 cm, the potential, [tex]V_2[/tex], is 3.9 V

Let the equation be

[tex]$& E=\frac{V_2-V_1}{Y_2-Y_1} \\[/tex]

substitute the values in the above equation, we get

[tex]$& =\frac{3.9-1.3}{28-26} \\[/tex]

simplifying the equation, we get

[tex]$& =\frac{2.6}{2} \\[/tex]

= 1.3 V/cm

Therefore, the potential at position [tex]y_3[/tex] = 32 cm be 1.3 V/cm.

To learn more about magnitude refer to:

https://brainly.com/question/30337362

#SPJ4