is nh3 strong or weak?

The fastest-moving molecules on average at a given temperature is C₂H₆.

Molar mass (M) is defined as the mass of a chemical compound divided by its amount of the substance measured in moles. The formula of the molar mass is given as, MB = m/nB, where m is the total mass of a sample of pure substance and nB is the amount of substance B given in moles. The definition of molar mass is applied to pure substance.

Molar mass of HBr = 80.9119

Molar mass of NO₂ = 46.005

Molar mass of C₂H₆ = 30.0694

Generally, the speed of the molecule is inversely proportional to its molar mass. Therefore, the lighter the molecule is the faster it moves.

Learn more about molar mass from the  link given below.

https://brainly.com/question/20775604

#SPJ4

The type of polyester that is formed in the reaction between ethylene glycol and phthalic anhydride is known as polyethylene terephthalate, or PET for short.

PET is a condensation polymer that is formed by the reaction of two monomers: ethylene glycol and terephthalic acid (or its derivative, phthalic anhydride). The reaction involves the formation of ester bonds between the monomers, which leads to the formation of a long chain of repeating units. The resulting polymer has high tensile strength, good dimensional stability, and excellent resistance to moisture and most chemicals.

PET is widely used in the manufacturing of bottles, fibers, films, and other products due to its desirable properties, such as being lightweight, transparent, and durable.

To know more about the phthalic anhydride, here

brainly.com/question/12972518

#SPJ4

Answer:

allylcyclopentane.

it may have other names but this is the most oniwn for this compound

The solubility of O₂ in blood at a depth of 100 feet (3 atm) is 2.32 × [tex]10^{-3[/tex] mol. This can be calculated using Henry's law.

The solubility of O₂ in blood at a partial pressure of 3 atm can be calculated as follows:

where kH is the Henry's law constant for O₂ in blood, and patm is the partial pressure of O₂ in atmospheres. The value of kH can be found from experimental data or from tables of Henry's law constants.

It is known that the solubility of O₂ in blood increases with increasing partial pressure, so the solubility of O₂ in blood at a depth of 100 feet (3 atm) is likely to be higher than it would be at the surface (1 atm).

Learn more about Solubility:

https://brainly.com/question/23946616

#SPJ4

A protein could be created from a set of amino acids. A naturally occurring, incredibly complex compound known as a protein is made up of amino acid residues connected by peptide bonds.

To learn more about amino acids refer to:

https://brainly.com/question/24106148

#SPJ4

The basic structure of an Amino acid is made up of  acidic group, amino group, hydrogen, and a R side chain. The correct answer is option b.

The basic structure of an Amino acid is made up of four components:

1. An acidic group (-COOH)

2. An amino group (-NH2)

3. A hydrogen atom (-H)

4. A side chain (R group)

The R group is what differentiates one Amino acid from another and gives each Amino acid its unique properties. There are 20 different R groups that can be attached to the basic structure of an Amino acid, resulting in 20 different Amino acids.

Proteins are made up of substances called amino acids bound with peptide bonds and these proteins and amino acids are the components of life.

To know more about Amino acid here:

https://brainly.com/question/14583479#

#SPJ11

The first diagram shows pure elements and the second diagram shows molecules. The third one is compounds and the fourth one is mixtures. Except mixtures, all are pure substances in their pure form.

Compounds are the combination of two or atoms of  different elements. They are of different types, like ionic compounds, covalent compounds, coordination compounds etc.

Here, elements and molecules only contains the same thing itself and they are pure substances. Similarly compounds with out the presence of addition substance are pure substances.

Mixtures are combinations of two or more individual substances or the mix of two or more pure substances. The third diagram represents a mixture of different compounds.

Find more on compounds:

https://brainly.com/question/19458442

#SPJ9

The image related to this question is given below:

The cyclohexane ring is essentially free of ring strain because:

What is cyclohexane?

Cyclohexane is a cyclic hydrocarbon with the molecular formula C6H12. It is a colorless, flammable liquid that is commonly used as a nonpolar solvent in chemical reactions and as a starting material for the synthesis of other compounds. Cyclohexane is a cycloalkane, which means it contains a closed ring of carbon atoms.

All of these factors contribute to the stability of the chair conformation of cyclohexane and the absence of ring strain in the molecule.

To learn more about cyclohexane:

https://brainly.com/question/13980687

#SPJ4

Answer:

1 to 2.5mg of calcium

Explanation:

100 cals ÷ 100 =1

250mg ÷ 100 = 2.5

The weight percent of H₂SO4in the solution is 15.98%.

To calculate the weight percent of H₂SO4in the solution, we need to first find the mass of H₂SO4in the solution. We can use the molarity of the solution and the molar mass of H₂SO4to calculate the mass of H₂SO4present:

Calculate the number of moles of 4:

Molar mass of H₂SO4 = 2(1.008 + 32.06 + 4(16.00)) = 98.08 g/mol

Number of moles of H₂SO4= mass of H₂SO4 / molar mass of H₂SO4

= 17.75 g / 98.08 g/mol

= 0.1809 mol

Calculate the mass of the solution:

Mass of the solution = volume of the solution x density of the solution

= 100.0 ml x 1.1094 g/ml

= 110.94 g

Calculate the mass of H₂SO4in the solution:

Mass of H₂SO4in solution = number of moles of H₂SO4x molar mass of H₂SO4

= 0.1809 mol x 98.08 g/mol

= 17.73 g

Now that we know the mass of H₂SO4in the solution, we can calculate the weight percent of H₂SO4:

Weight % H₂SO4= (mass of H₂SO4/ mass of solution) x 100%

= (17.73 g / 110.94 g) x 100%

= 15.98%

Therefore, the weight percent of H₂SO4in the solution is 15.98%.

Learn more about mass of solution here :

brainly.com/question/29482678

#SPJ4

A reaction in which a compound breakdown into two or more simpler substances is called decomposition reaction (C)

A decomposition reaction is a chemical process in which a single compound is broken down into two or more constituent parts that are more straightforward. In most cases, the decomposition reaction can be expressed as:

                                                    AB ⇒ A + B

The majority of decomposition reactions require an energy input in the form of heat, light, or electricity. Several typical instances of decomposition reactions include the chemical transformation of hydrogen peroxide into water and oxygen as well as the transformation of water into hydrogen and oxygen. Consequently, a decomposition reaction is a chemical reaction that may be simply defined as a reaction in which one reactant decomposes into two or more products.

To learn more about decomposition reaction, click here:

https://brainly.com/question/16987748

#SPJ4

To maintain the quality of beer, it is important to maintain consistent calcium and pH levels. So the statement is true.

Calcium is important for yeast health and contributes to the beer's flavor and texture.

while pH affects yeast activity and can impact the stability and flavor of the beer. If the levels of calcium and pH fluctuate too much, it can lead to issues with fermentation and negatively affect the quality of the beer.

Maintaining consistent levels of calcium and pH in beer can also impact the clarity and stability of the final product.

Therefore, consistent levels of calcium and pH are crucial in maintaining the quality of beer.

To learn more about fermentation:

https://brainly.com/question/11554005

#SPJ4

No, adding chromate, an oxidizing agent, to 3-pentanol, 2-methyl-2-butanol, or 1-propanol would not result in a green Cr⁺³ solution.

This refers to a chemical species that tends to oxidize other substances, i.e. cause an increase in the oxidation state of the substance by making it lose electrons. An oxidizing agent is often referred to as an oxidizer or an oxidant.

The oxidation of primary alcohols (such as 1-propanol) with chromate typically results in the formation of carboxylic acids, while secondary alcohols (such as 2-methyl-2-butanol) are typically oxidized to ketones. Tertiary alcohols (such as 3-pentanol) are generally resistant to oxidation. The green color in a Cr⁺³solution is due to the presence of the chromium ion, which is typically formed by the oxidation of a Cr⁺²ion, rather than the oxidation of an alcohol.

Learn more about oxidizing agent on

https://brainly.com/question/10547418

#SPJ1

The glucose with the molecular formula of C₆H₁₂O₆ does not dissociates into the ions it will remain same as the molecule.

The glucose that is the C₆H₁₂O₆ is the covalent compound. The covalent compound is the compound which is formed in between the atoms or the molecules with the mutual sharing of the electrons. This compound contains the three non metallic  elements. When the non metal bond they will share the electron pairs and form the covalent compound. It is typical example of the nonelectrolyte. The Glucose is also known as the which sugar dissolves readily in water.

Thus, the glucose does not dissociates in to the ions it stays same as the molecule.

To learn more about glucose here

https://brainly.com/question/30548064

#SPJ4

Nitrous acid is the chemical name for HNO₂ and it is its systematic name.

Nitric acid has the chemical formula HNO₃. Compared to nitrous acid, it is more potent and stable. This is due to the fact that its conjugate base is more stable than that of nitrous acid. H₂N₂O₂ is the chemical formula for hyponitrous acid. HNO₂ is a wobbly, unstable, and mildly acidic substance. It is sometimes referred to as a nitrogen oxoacid. Its molecular weight is 47 g/mol. HNO₂ has a boiling point of 158°C.

Nitrous acid is commonly produced by acidifying nitrite salt with mineral acid. As a result, nitrous acid is the chemical term or the systematic name for HNO₂.

To know more about nitrous acid, visit,

https://brainly.com/question/28166496

#SPJ4

The electronic configuration of the Sulfur with the atomic number of 16 is as : 1s² 2s² 2p⁶ 3s² 3p⁴ .

The atomic number of the sulfur is 16. The sulfur has the total number of the electrons is 16 , the number of the protons are 16 and the number of the neutrons are the 16. The electronic configuration of the sulfur is as follows :

The electronic configuration of the sulfur, S = 1s² 2s² 2p⁶ 3s² 3p⁴

The the Sulfur belongs to group 16 in the Modern periodic table. The Sulfur is placed in the third period in the modern periodic table.

To learn more about electronic configuration here

https://brainly.com/question/29757010

#SPJ4

The tiny unit of an element that retains the properties of the element is called an atom.

Atoms are the basic building blocks of matter and are composed of a nucleus, which contains positively charged protons and neutral neutrons, surrounded by negatively charged electrons that orbit the nucleus. The unique arrangement of protons, neutrons, and electrons in an atom determines its chemical and physical properties, such as its atomic number, mass, and reactivity.Atoms are incredibly small and are typically measured in units of picometers or angstroms.

Each element is defined by the number of protons in its atomic nucleus, which is known as its atomic number. For example, carbon atoms have six protons in their nucleus, while oxygen atoms have eight protons. The number of neutrons in an atom's nucleus can vary, resulting in isotopes of the same element with different atomic masses.

Atoms can combine with other atoms to form molecules and compounds through chemical bonds, including covalent bonds, ionic bonds, and metallic bonds.

Learn more about atoms here:

https://brainly.com/question/13654549

#SPJ4

The molarity of 0.75 moles of sodium chloride is dissolved to make 0. 05 liters of the solution is 15 M.

To find the molarity of the solution, we need to use the formula:
Molarity (M) = moles of solute / liters of solution

We are given the moles of solute (0.75 moles of sodium chloride) and the liters of solution (0.05 liters). Plugging these values into the formula, we get:
Molarity (M) = 0.75 moles / 0.05 liters
Molarity (M) = 15 M

Therefore, the molarity of the solution is 15 M. This means that there are 15 moles of sodium chloride dissolved in 1 liter of solution.

Your question is incomplete, but most probably your full question was

Find the molarity of the following solutions: 0.75 moles of sodium chloride is dissolved to make 0. 05 liters of solution

For more information about molarity refers to the link: https://brainly.com/question/16587536

#SPJ11

This criminal justice model outlines what a successful criminal justice system should look like a crime control model.

To learn more about criminal justice system refer to:

https://brainly.com/question/14417782

#SPJ4

The Radiometric dating is the possible because the rates of the decay of radioactive isotopes are constant. The correct option is c. are constant.

The Radiometric dating is possible because of the rates of the decay of the radioactive isotopes. They use the absolute radiometric dating that requires the extremely long-lived parent nucleus. The Radiometric dating helps to calculates the age in the years for the geologic materials by the measuring of the presence of the short-life radioactive element. The radioactive dating or the radioisotope dating is the technique that is used to date the materials such as the rocks or the carbon.

Thus, the rates of the decay of radioactive isotopes are constant in the in the Radiometric dating .

To learn more about radioactive isotopes here

https://brainly.com/question/2798742

#SPJ4

Answer:

Precise means getting the same result (e.g., number) each time in a series of replicating experiments.  Accurate means that the result is very close to the actual number.  One can have a precise, but inaccurate result.  Precision does not preclude systemic errors.  On the other hand, accurate data may look sloppy, but it produced a correct result.

Explanation:

Let's image an experiment in which the actual value is know to be 5.  

Precise:

Now say you and your lab-mate got the following results after 6 measurements of the same experiment.

  Precise Accurate

  4.5        6.5

  4.4           4.1

  4.6      5.1

  4.5           5.1

  4.5           5.8

  4.6           3.5

Total 27.1   30.1

Avg.  4.52    5.02

The precise readings are closer together than the accurate readings, but they are not as accurate (4.52) as the sloppier, but more accurate measurements on the right, which show an average value of 5.02, very close to the actual value of 5.  Thus, one can have results that are very precise (the numbers are all close to each other), but still wind up with an inaccurate number.  This is often due to some constant error, perhaps a mis-calibrated instrument or improperly made solution.  The series of measurements under Accurate, show greater deviation from each other, but the average, 5.02, is very close to the actual value, 5.0.

Na+ would enter the cell while K+ would exit. In the postsynaptic or postjunctional membrane, ACh diffuses and binds to certain receptors.

In the postsynaptic or postjunctional membrane, ACh diffuses across the synaptic cleft and binds to specific receptors. An altered conformation of a membrane channel that is selectively permeable to both Na+ and K+ results from the binding of ACh to its receptors.

When ACh binds to its receptors, it modifies the structure of a membrane circuit that is selectively permeable to both Na+ and K+. When cholinergic receptors on skeletal muscle fibres interact with each other, ligand-gated sodium channels inside the cell membrane are opened.

The muscle fibre is then exposed to sodium ions, which causes the muscle to contract. By stimulating nonpostsynaptic AChRs, ACh specifically inhibits presynaptic nerve terminal specialisation and postnatal AChR cluster (synaptic differentiation), and by inhibiting postsynaptic AChRs, it inhibits motor short tapered bandwidth or engine axon splitting (synaptic growth).

Ion channels in the muscle fibre membrane are opened by the neurotransmitter acetylcholine (ACh) attaching to postsynaptic receptors.

The complete question is;

What would be the effect of ACh binding to its receptor on the postsynaptic muscle cell?

A.) Ca2+ would leak out of the cell as Na+ flowed into the cell.

B.) Ca2+ would flow into the cell as Na+ flowed out of the cell.

C.) Na+ would flow into the cell and K+ would flow out of the cell.

D.) Only Na+ would flow into the cell.

To learn more about postsynaptic muscle cell refer to:

https://brainly.com/question/29822671

#SPJ4

Answer:

1,1,1, and 2

Explanation:

The equation for the creation of carbonic acid found in rainwater is:

CO₂ + H₂O → H₂CO₃

In this equation, carbon dioxide (CO₂) reacts with water (H₂O) to form carbonic acid ( H₂CO₃).

Carbonic acid is a weak acid that is formed when carbon dioxide dissolves in water. This process occurs naturally in the atmosphere when carbon dioxide in the air dissolves in rainwater, creating carbonic acid. Carbonic acid is also produced when carbon dioxide dissolves in seawater, which can have significant effects on the ocean's pH balance and the growth and survival of marine organisms.

The creation of carbonic acid in rainwater is important to understand as it can contribute to the acidification of soils and bodies of water, which can have negative impacts on plants, animals, and ecosystems.

To know more about Rainwater:

https://brainly.com/question/14295571

#SPJ4

Answer:

yes it has two

double bond and n-o-bond the n atom has a unpaired electron and a positive charge

there are two major resonance contributors to no2.

The harmful substance is recognized by its product identity. The chemical name, code number, or batch number are a few examples of possible values.

To learn more about code number refer to:

https://brainly.com/question/26388921

#SPJ4

The work is needed to move the alpha particle to the midpoint of one of the sides of the square is - 7* 10⁻²² J

At the intersection of a square, four electrons are placed. Therefore, we will start by determining the electrostatic potential at the square's center.

So, it is shown here as

V = 4 kQ/r

Where.

r= distance of corner of the square from it center

r = a/√2

r = 10 nm/ √2 = 7.07 nm

Q= e = -1.6 x 10⁻¹⁹ C

The net potential is given by;

V = 4 x 9 x10⁹ x (-1.6 x 10⁻⁹)

              7.07 x 10⁻⁹

V= 0.815 V

at this time, the alpha particle's potential energy

Ui = qV

Ui = 2 x 1.6 x  10⁻¹⁹ x - 0.815 = -2.6 x 10⁻¹⁹J

Then, one of the sides' midpoints Provided that's the electrostatic potential as

V = 2 kQ + 2 kQ

         r₁         r₂

So,

r₁ = a/2 = 5nm

r₂ = √(a/2)²+a² = √5 a /2

r₂ = 11.2 nm

now potential is given as

V = 2 9x 10⁹ * (-1.6 x 10⁻¹⁹) + 2 9x 10⁹ * (-1.6 x 10⁻¹⁹)

                    5x 10⁻⁹                        11.2 x 10⁻⁹

V = - 0.576 - 0.257 = - 0.833V

Final potential energy is now presented as

Uf = q * V = 2 * 1.6 * 10⁻¹⁹ -0.833 = -2.67 x 10⁻¹⁹ J

Now work done in this process is given as

W = Uf - Ui

W = (- 0.267 * 10⁻¹⁹) - (-0.26 * 10⁻¹⁹)

W = - 7* 10⁻²² J

Your question is incomplete but most probably your full question was

Four electrons are located at the corners of a square 10.0 nm on a side, with an alpha particle at its midpoint. Consider the alpha particle as your system. How much work is needed to move the alpha particle to the midpoint of one of the sides of the square

Learn more about work done here:

brainly.com/question/24716770

#SPJ4

KBr is an ionic compound . It is made up of an ionic link between a metal (potassium, K) and a nonmetal (bromine, Br).

As the bromine atom in KBr receives an electron to become a negatively charged ion, the potassium atom loses an electron to become a positively charged ion (K+) (Br-). The ionic bond in KBr is produced by the resultant attraction between the positive and negative ions.

An ionic compound is a chemical compound composed of positively charged ions (cations) and negatively charged ions (anions) that are held together by electrostatic forces of attraction. These compounds are formed when one or more electrons are transferred from a metal atom to a nonmetal atom, resulting in the formation of ions with opposite charges.

Ionic compounds typically have high melting and boiling points, are brittle, and are good conductors of electricity in the molten or aqueous state.

To learn more about Ionic compound :

https://brainly.com/question/9167977

#SPJ4

The major product of the substitution reaction between p-fluoro anisole and sulfur trioxide in sulfur acid, assuming one equivalent of reagents is used, is p-fluorobenzene sulfonic acid.

The mechanism of this reaction proceeds via electrophilic aromatic substitution, where sulfur trioxide is the electrophile. The reaction occurs in two steps, the first of which is the generation of a sulfonic acid anhydride intermediate. The second step involves the attack of the aromatic ring of p-fluoro anisole by the sulfonic acid anhydride intermediate, followed by deprotonation to yield the final product, p-fluorobenzene sulfonic acid.

The sulfonation of p-fluoro anisole with sulfur trioxide and sulfuric acid is an example of a Friedel-Crafts-like electrophilic aromatic substitution. The reaction provides a useful method for the introduction of sulfonic acid groups onto aromatic compounds, which can be useful for the preparation of sulfonate esters or sulfonamide derivatives. The product p-fluorobenzene sulfonic acid is a versatile intermediate in organic synthesis, which can be used for the preparation of various substituted benzene sulfonic acids or sulfonamides.

Learn more about anisole

brainly.com/question/28334462

#SPJ4