IS N2 (diatomic molecule of nitrogen considered a chemical compound can it be split into two or more simpler substances?

The structure of the product that is formed is (2R,3S)-hexane-2,3-diol

The missing compound from the given question known as Hex-2-ene is shown with its stick formula in the reactant side of the image attached below.

Alkene reacts with a peracetic acid via the process of epoxidation of alkenes to produce an intermediate known as oxiranes. This intermediate is later being treated with aqueous acid to give a chemical compound with two hydroxyl substituents known as the glycol(diol) family.  

Hex-2-ene reacts with peracetic acid CH₃CO₃H.

During the process of the reaction, an oxygen atom is moved from the peracetic acid to the C = C double bond, generating an oxirane ring.

Here;

Peracetic acid is considered to be an electrophilic oxidizing agent because the transferred oxygen atom has a positive charge.

The intermediate (oxirane) is further reacted with aqueous acid to produce an enantiomer of the diol family.

Learn more about the epoxidation of the alkene family.

https://brainly.com/question/9126498

Frequency – The frequency of a wave is the number of waves that pass a given point in a certain amount of time. Frequency is measured in units called hertz (Hz), and is defined as the number of waves per second. A wave that occurs every second has a frequency of 1 wave per second (1/s) or 1 Hz.

I think it is c

because it say tripled

Answer:

Charcoal is produced by the incomplete combustion of plant or animal products. The major use of charcoal is for outdoor cooking. The second largest use of charcoal is in industrial applications in the form of activated charcoal. The activation process involves heating the charcoal subjecting it to steam or treating with a chemical to both remove substances that have adhered to it as well as break it down into finer particles and thus increase the surface area. Activated carbon has been used for its adsorptive properties as a ‘universal antidote’ in cases of poisonings, as a filter aid agent, and in decolorization processes.

This problem is giving information about the proton concentrations of three solutions at 25 °C. Despite they are not numerically given, we can propose three scenarios to see how to approach the question.

Let the following solutions to come up:

[H⁺] = 2.63x10⁻³ M

[H⁺] = 1.00x10⁻⁷ M

[H⁺] = 4.511x10⁻⁹ M

The first step, will be the calculation of the pH for each solution via:

pH = -log([H⁺])

So that they turn out to be:

pH = -log(2.63x10⁻³ M) = 2.580

pH = -log(1.00x10⁻⁷ M) = 7.000

pH = -log(4.511x10⁻⁹ M) = 8.3457

In such a way, since acidic solutions have a pH below 7, neutral have a pH equal to 7 and basic have it above 7, we infer the first one is acidic, second one is neutral and third one is basic.

Thus, you can reproduce this methodology with the proton concentrations you are given.

Learn more:

Answer:

Electrochemistry

Explanation:

Answer: Place a piece of white paper under the analyte flask throughout the titration

Explanation:

The end point of titration can be made easy by the use of indicators. But we have to be keenly observe for each drop from the burette because, the colour change will be sudden for a drop.

Titration is an analytical technique used to determine the unknown concentration using a standard reagent of known concentration. The standard reagent of known concentration is called titrant and the  one to be determined is called analyte.

Usually analyte is taken in a conical flask and titrant in a burette. The end point of titration is the point at which the reaction is completed in perfect stoichiometry.

In acid-base titrations, the indicators used having different colors in different pH. Hence, the indicator in the analyte will change in color when the acidity of the medium changes. We have to observe keenly for the color change because it happens for any drop.

The adding of titrant from the burette must be dropwise and thus we can get a time to notice the sudden colour change of indicator.

To get more about titration indicators, refer the link below:

https://brainly.com/question/27419598

#SPJ5

The frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].

The given parameters;

The frequency of the infrared wave is calculated by using wave equation as shown below;

v = fλ

where;

[tex]f = \frac{v}{\lambda} \\\\f = \frac{3\times 10^8}{5.5 \times 10^{-6}} \\\\f = 5.5 \times 10^{13} \ Hz[/tex]

Thus, the frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].

Learn more here:https://brainly.com/question/18477700

Sorry I accidentally touched it

This problem is providing the initial volume and pressure of a gas as 675 mL and 1.5 atm and then mentions the final volume as 345 mL and asks for the new pressure of the gas.

Thus, we start off this problem by recalling the concept of Boyle's law as an inversely proportional relationship between pressure and volume:

[tex]P_1V_1=P_2V_2[/tex]

In which we solve for the final pressure, [tex]P_2[/tex] as shown below:

[tex]P_2=\frac{P_1V_1}{V_2} \\\\\\P_2=\frac{675mL*1.5atm}{345mL} \\\\\\P_2=2.93atm[/tex]

Considering we had to cancel out the milliliters to obtain atm as units of pressure.

Learn more:

Answer:

Nonmetals and nonmetals tend to form covalent bonds.

or

P and S

Explanation:

Answer:

according to online:

"Hydrogen ions are transported with the electrons along the chain of reactions. In photosystem I, the electrons are energized, and the energy is stored in molecules of NADP+. During these reactions, the NADP+ molecules are reduced by the addition of electrons. A hydrogen ion is added to NADP+ to form NADPH."

Explanation:

hope this helps!! :)

Answer:

Z= 10.8

Explanation:

The simple formula Z + X = Y can solve this problem. Since we are given that,

Then we can just substitute the actually values for the letters.

Z + 8.7 = 19.5

From here, we can just do simple math to find the answer.

Z + 8.7 - 8.7 = 19.5 - 8.7

Z = 10.8

So, 10.8 grams of Z reacted to form the product.

When the compound shown is treated CH3MgI followed by water, 1,3 - cyclohexadienol is formed.

Grignard reagent is an alkylmagnesium halide. Grignard reagents are important synthetic tools in chemistry. They are used to synthesize and number of compounds in the laboratory.

When the Grignard reagent, CH3MgI is reacted with compound shown followed by treatment with water, the product of the reaction is 1,3 - cyclohexadienol whose structure is shown in the second image attached to this answer.

Learn more: https://brainly.com/question/9309478

Answer:

Tthe 3-carbon pyruvate molecule made in glycolysis loses a carbon to produce a new, 2-carbon molecule called acetyl CoA. The carbon that is removed takes two oxygens from pyruvate with it, and exits the body as carbon dioxide (CO 2​start subscript, 2, end subscriptt).

Explanation:

Answer:

Mass and gravitational for e is not relart

4NH₃(g) + 6NO(g) → 5N₂(8) + 6H₂O(l)

The mole ratio of NO to NH₃ based on the balanced equation is 6 to 4 (or 3 to 2 in the simplest form)

Therefore in the reaction, there are ³/₂ more moles of NO than NH₃.

⇒ since moles of NH₃ = 2.45 mol  

   then moles of NO    =   2.45 mol × ³/₂  

                                     =   3.675 mol

6.022 × 10^23 ×2 = 12.044 × 10^ 23 atoms

Answer:

In one mole of water, there will exist approximately 6.02⋅1023 water molecules. So, there will be a total of 6.02⋅1023⋅2≈1.2⋅1024 hydrogen atoms.

Answer:

A. Core

Explanation:

The collisions which occur between the hydrogen atoms starts to heat the gas in the cloud. Once the temperature reaches 15,000,000 degrees Celsius, nuclear fusion takes place in the center, or core, of the cloud. The tremendous heat given off by the nuclear fusion process causes the gas to glow creating a protostar.

In a star, nuclear fusion which is a type of  nuclear reaction occurs in the core.

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/12786977

#SPJ5

Answer:

It depends on the atom, or more specifically, on the size of its nucleus. There is a competition between the electrical repulsion of the protons (that drives the nucleus apart) and the attraction of the protons and neutrons (due to chromodynamics). For nuclei above a certain size, the repulsion tends to win

Explanation:

hope this helps

Answer:

oxygen

Explanation:

cause thats what we need

Answer:

Both Iron Man and Spider-Man are quite powerful in the comic books, but we think that Spider-Man would be able to defeat Iron Man. Despite his powers, Iron Man is still just a man in a suit, while Spider-Man has actual superpowers and we think they could easily cancel all of Iron Man's advantages

Explanation:

Answer:

Circulatory System

Explanation:

the answer is B. 2

because there is 2 iron on the right side so you need another two on the left side to balance it out

Answer:

O b

Explanation:

high compressibility is not the property of metal.

Answer:

atomic number

Explanation:

The periodic table is a table that lists all of the chemical elements in order of atomic number, starting with hydrogen and ending with oganesson. The number of protons in the nucleus of an atom of a certain element is its atomic number.

Have a good day :)