Answer:
Yes
It is an organic chemical compound
Its formula is [tex]C_6H_6[/tex]
Explanation:
?Where did the mass of the forest trees come from? What happens to that mass when the forest burns?
Answer:
Forests prevent desertification.
Explanation:
A straight piece of wire is coiled to form a spring. Is it a Chemical or ra physical change? explain by justifying your answer.
Answer:
Explanation:
It is a physical change. The reason is that when a straight piece of wire is coiled to form a spring, its chemical properties do not change. Only the physical property ( shape ) of the wire changes.
Hope this helps
plz mark as brainliest!!!!!!
Answer:
See below
Explanation:
If a piece of wire is coiled to form a spring, it is a physical change. This is because there is no change in it's bonds rather there is a change in its shape and figure. Also, Physical change is reversible such that the coiled piece of wire can be changed back to a straight piece of wire. But, A chemical change is irreversible.
So, This is a physical change.
Select the claim that correctly describes the surface tension of water and the ability of the water strider to walk on water if the pond temperature increases due to global warming.
A
Global warming would increase the surface tension of water, making it easier for water striders to walk on water.
B
Global warming would increase the surface tension of water, making it harder for water striders to walk on water.
C
Global warming would decrease the surface tension of water, making it easier for water striders to walk on water.
D
Global warming would decrease the surface tension of water, making it harder for water striders to walk on water.
Answer:
The correct option is;
D Global warming would decrease the surface tension of water, making it harder for water striders to walk on water
Explanation:
Global warming involves the heating of the ecosystems on Earth due to human activity, which results in rising temperatures
As the temperature of the water rises due to global warming the surface tension decreases due to the increasing ratio of the force of higher kinetic energy water molecule to inter-molecular cohesive forces pulling the water together, which tends to weaken the effect of the cohesive forces and thus reduce the surface tension
As the surface tension has been reduced, the water striders will find it difficult to walk on the water surface as the maximum weight the water surface can lift without shearing, due to surface tension is reduced.
Thanks for the help :) Question attached below:
• Take a look at the steps below to see how to balance this equation. Let's start by writing the unbalanced equation given the information.
Unbalanced Equation : C₃H₈ (g) + O₂ (g) → CO₂ (g) + H₂O (g) ,
Start by Balancing the Carbons : C₃H₈ (g) + O₂ (g) → 3CO₂ (g) + H₂O (g)
Now let's balance the Hydrogen : C₃H₈ (g) + O₂ (g) → 3CO₂ (g) + 4H₂O (g)
Balancing the Oxygen : C₃H₈ (g) + 5O₂ (g) → 3CO₂ (g) + 4H₂O (g)
Balanced Equation : C₃H₈ (g) + 5O₂ (g) → 3CO₂ (g) + 4H₂O (g)
• Let's apply dimensional analysis here,
0.7 L propane × (5 liters Oxygen / 1 liter Propane) = 3.5 Liters of Oxygen
• Similarly we can identify the liters of carbon dioxide produced in the reaction,
0.7 L propane × (3 liters Carbon Dioxide / 1 liter Propane) = 2.1 Liters of Carbon Dioxide
• 0.7 L propane × (4 liter water vapor / 1 liter propane ) = 2.8 Liters of Water Vapor
please help, ive been putting 3 for the coefficient and 14 for the exponent but, it keeps saying it’s wrong. any help is appreciated.
Answer:
3 × 10¯¹⁰
Explanation:
9×10² ÷ 3×10¹²
The above expression can be evaluated as follow:
9×10² ÷ 3×10¹²
Recall:
3² = 9
3¹ = 3
Therefore,
9×10² ÷ 3×10¹² = 3²×10² ÷ 3¹×10¹²
Recall:
y^m ÷ y^n = y^(m – n)
Therefore,
3²×10² ÷ 3×10¹² = 3²¯¹ × 10²¯¹²
= 3¹ × 10¯¹⁰
Recall:
y¹ = y
Therefore,
3¹ × 10¯¹⁰ = 3 × 10¯¹⁰
Therefore,
9×10² ÷ 3×10¹² = 3 × 10¯¹⁰
Bleach boils at 101°C. Isopropyl alcohol (rubbing alcohol) boils at 82.5°C. Vinegar boils at 100.6°C. Water boils at 100°C. A student has an unknown clear liquid. She wants to determine what it is, so she decides to boil the liquid and use the boiling point as a means of identification. The liquid starts boiling at 99°C. Based on the boiling points shown, which substance is it?
Answer:
most likely water
Explanation:
most likely it is water, however pressure plays a role, if you are at sea level the boiling point of water is 100°C but if you are on Mt. Everest it is 71°C, assuming she is slightly above sea level it is water.
A chef fills a 100 ml container with 76.5 g of cooking oil. What is the density of the oil? \
Which best describes the role of a primary consumer in a food web? Carnivore that feeds on producers Herbivore that feeds on producers Herbivore that feeds on primary consumers Carnivore that feeds on primary consumers
A food web is the interconnection of the various food chains. A herbivore is a primary consumer that feeds on the producers in a food web. Thus, option B is correct.
What is a primary consumer?A primary consumer is an organism that appears second at the trophic level after the producers in an ecological pyramid of the food web and food chain. They feed on the producers to gain energy.
The primary consumer is herbivores as they mainly eat the producers that are planted in a food web. They get the maximum amount of energy as a consumer in a pyramid.
They only eat plants hence called herbivores. They get eaten by the secondary consumers that are omnivores and carnivores as they eat plants and animals both.
Therefore, option B. primary consumer are herbivore that eats producers.
Learn more about primary consumers here:
https://brainly.com/question/11173626
#SPJ2
Lamar has been running sprints tp prepare for his next football game. He has found that he can maintain his maximum speed for 45 yards. He's thinking of running in a 5 km race in a few months, but doesn't know if he can maintain his maximum speed for the entire 5 km. Can you help him determine how far he can?
Answer and Explanation:
Given that
Length of race = 5km
Maximum speed = 45 yards
Based on the above information,
We transform the yards to kilometer i.e.
1 km = 1093.613 yards
And,
x = 45 yards
So,
1093.613 × x = 45
x = 45 ÷ 1093.613
x = 0.0411480 km
Where
x = Maximum length for which the maximum speed demonstrated in kilometers is sustained.
So, we concluded that Lamor cannot go for the overall 5km as he maintained till 0.0411 km
Silver has a density of 10.5 g/cm and gold has a density of 19.3 g/cm. Which would
have a greater mass, 5 cm of silver or 5 cm of gold?
Answer:
Hey there!
Gold would have a greater mass, because density is mass/volume, and if the density is greater, so is the mass.
Let me know if this helps :)
4. Refer the table given below to answer the questions fon Electronic configuration Element Atomic number 11 R 19 2,8,1 2,8,8, 1 2,8,8, 92 20 S T 12 2,812. Are the above elements Q, R, S and I metals or non-metals? Support your answer with reasona.
Answer:
The electronic configuration of the element with Atomic number 19 is 2,8,8,1. The element is potassium. It is an alkali metal with one valence electron.
A top fuel dragster is designed to go from 0 to 100 miles per hour in a mere 0.8
seconds. Calculate its acceleration. Show your work and include units.
Answer:
Acceleration, [tex]a=55.88\ m/s^2[/tex]
Explanation:
It is given that, A top fuel dragster is designed to go from 0 to 100 miles per hour in a mere 0.8.
Initial velocity, u = 0
Final velocity, v = 100 mph
1 mph = 0.44704 m/s
100 mph = 44.704 m/s
Time, t = 0.8 s
We need to find its acceleration. Rate of change of velocity equals acceleration.
[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{44.704-0}{0.8}\\\\a=55.88\ m/s^2[/tex]
So, the acceleration is [tex]55.88\ m/s^2[/tex]
is oxygen gas an element or a compound?
What is needed to burn the candle (reactant)?
Answer:
wax, candlewick, and oxygen
Explanation:
The burning of the candle is both a physical as well as a chemical change. The reactants are the substances or the raw materials that are required for a reaction to the process. In the process of burning a candle, the reactants are the fuel which includes wax and wick, and oxygen which is found in the air. The products found at the end of the reaction are carbon dioxide and water vapor.
Imagine that Ana has a block made of pure gold. If she cuts this block into two equal pieces, pick the statement that best describes the resulting pieces.
Answer : The correct statement is:
The density of each piece is the same as that of the original block.
Explanation :
Intensive property : It is defined as a property of substance which does not change as the amount of substance changes.
Examples: Temperature, refractive index, density, hardness, etc.
According to question, if Ana has a block made of pure gold and she cuts this block into two equal pieces then the density of each piece is the same as that of the original block because density is an intensive property that does not changes until and unless material is changed.
That means density remains same as that of the original piece.
Hence, the correct statement is the density of each piece is the same as that of the original block.
Please I have no idea my teacher didn’t teach this
Answer:
B (40º c)
Explanation:
Rubidium being silvery-white and melting at 39 ºC. Which means 40º C is the closest.
Why is it important to identify carefully the problem to be solved
Answer:
It's importance is the fact that you cannot solve s situation if you don't know it's problem.
Explanation:
Problem identification or identifying a problem by scientist I a major and a key step in solving a problem.
I mean, if you don't identify a problem, there is no way you can think about the solution not to talk of getting the solution.
So identification of a problem is infact one of the major step a scientist must take to solve a situation.
It's importance is the fact that you cannot solve s situation if you don't know it's problem.
The first mechanistic step in the direct reaction of an amine with a carboxylic acid to produce an amide is ________.
A) an acid-base reaction
B) nucleophilic attack on the carbonyl carbon
C) loss of H2O
D) loss of CO2
E) loss of N2
Answer:
The first step is - option A) an acid base reaction.
Explanation:
The direct reaction of a carboxylic acid with an amine to form an amide is expected to be difficult as it would deprotonate the carboxylic acid and make a nonreactive carboxylate.
The first step in this reaction would be an acid - base reaction as protonation of the carbonyl carbon, that involves the interchange of proton in between electric charge or neutral compound, it is also known as protonation or deprotonation. The acid base reaction is followed by the nucleophilic attack on the carbonyl carbon.
Thus, The first step is - option A) an acid base reaction.
If an atom has 6 protons and 7 neutrons it will have 7 electrons if it is a neutral atom.
Answer:
NO
Explanation:
To maintain electric neutrality, the atom has to have equal number of electrons and protons. Therefore, it needs to have 6 electrons to be neutral.
The growth rate is the death rate minus the birth rate these change because birth rates and
death rates increase or decrease
O True
False
Question 3
1 pts
Answer:
Hey there!
False. The growth rate is actually the birth rate minus the death rates.
Let me know if this helps :)
How is heat measured?
Answer:
To measure heat, you divide the change in temperature of a sample of water by the mass of the water.
Whenever you cant study when you have to , listen to this song
'Very very strongest one piece'
What properties you can determine for carbon and calcium based on their respective locations on the periodic table
Answer:
Carbon is non metal because it is found in the right side of the periodic table while calcium is metal because it is found in the left side of the periodic table.
Write a full chemical equation for the reactions between magnesium and sulfuric acid
Answer:
magnesium + hydrochloric acid → hydrogen gas + magnesium chloride
explanation:
the nitrogen in HNO3 is in the +5 oxidation state and is easily reduced. The reduction would result in the oxidation of the hydrogen gas, forming the water once again.The sulfur in H2SO4 is also in its highest oxidation state, +6.
Hope this helps :)
What is 745000 millimeters converted to Megameters?
Answer:
0.000745 megameters is the answer please mark me as brainliest
Answer:
Instantly Convert Millimeters (mm) to Megameters (Mm) and Many More Length Conversions Online. Millimeters Conversion Charts. Many Other ...
Missing: 745000× | Must include: 745000
What is a good example of ACCURACY and PRECISION? *
Answer:
Bow and arrow
Explanation:
A bow and arrow need accuracy to hit a target. It needs precision to hit the small target
Carbon burns in air to release energy along with formation of which carbon dioxide carbon dioxide and water carbon dioxide and hydrogen carbon monoxide and water
Answer:
CO2 and O2
Explanation:
Is sodium ion or sodium metal in table salt?
Answer:
sodium ion
Explanation:
can you help me what is the arrhenius concept of acid and bases explain in detail
Answer:
Explanation:
The Arrhenius definition of acid-base reactions, which was devised by Svante Arrhenius, is a development of the hydrogen theory of acids. It was used to provide a modern definition of acids and bases, and followed from Arrhenius’s work with Friedrich Wilhelm Ostwald in establishing the presence of ions in aqueous solution in 1884. This led to Arrhenius receiving the Nobel Prize in Chemistry in 1903.
As defined by Arrhenius:
An Arrhenius acid is a substance that dissociates in water to form hydrogen ions (H + ). In other words, an acid increases the concentration of H + ions in an aqueous solution. This protonation of water yields the hydronium ion (H 3 O + ); in modern times, H + is used as a shorthand for H 3 O + because it is now known that a bare proton (H + ) does not exist as a free species in aqueous solution.
An Arrhenius base is a substance that dissociates in water to form hydroxide (OH – ) ions. In other words, a base increases the concentration of OH – ions in an aqueous solution.
Which of the following does not take place in the "Experiment step of the scientific method?
A. Making a bar graph
B. Creating the procedures
Collaborative Lesson Planning
C. Making a materials list
D. Conducting the experiment