Iron ore, which is composed of mostly Fe2O3, is converted to cast iron (Fe) in a blast furnace.

The reaction is given below:

Fe2O3 + 3CO
⟶
2Fe + 3CO2

If 159.2 kg of Fe is obtained from 267.5 kg of ore and the percent yield of the reaction is 95.0% , what is the percent of Fe2O3 in the iron ore? Assume that there is enough CO to react with all the Fe2O3.

Molar mass of Fe2O3 = 159.69 g/mol

Molar mass of Fe = 55.85 g/mol

Three different atoms or atomic anions with 17 electrons are:

An atomic anion is an ion that consists of a single atom with a negative charge. The charge results from the atom gaining one or more electrons, which gives it a surplus of electrons and a net negative charge. Atomic anions are commonly found in ionic compounds, where they bond with positive ions (cations) to form a neutral compound.

Therefore, the chemical symbols for three different atoms or atomic anions with 17 electrons are CI, F, and Br.

learn more about atomic anions: https://brainly.com/question/27549142

#SPJ1

Answer: Cl, S-, P2-

Explanation:

Begin by thinking of an atom which is uncharged or neutral. In this case, the number of protons in the atom must equal the number of electrons. That would give the atom 17 protons and make it an atom of element 17.

A neutral atom of sulfur has 16 protons and 16 electrons. That's one less electron than you want. However, a sulfur anion with a charge of -1 has 16 protons and electrons. So this is a second possible answer.

Similarly, an atom of phosphorus with a charge of -2 would have 15 protons and 17 electrons.

Answer:

Explanation:

To calculate the number of atoms of boron present in 5.44 grams of boron tribromide (BBr3), we need to use Avogadro's number and the molar mass of BBr3.

The molar mass of BBr3 can be calculated by adding the atomic masses of boron and three bromine atoms:

BBr3 molar mass = 1 x atomic mass of B + 3 x atomic mass of Br

BBr3 molar mass = 1 x 10.81 g/mol + 3 x 79.90 g/mol

BBr3 molar mass = 295.41 g/mol

Next, we can calculate the number of moles of BBr3 in 5.44 grams:

moles of BBr3 = mass of BBr3 / molar mass of BBr3

moles of BBr3 = 5.44 g / 295.41 g/mol

moles of BBr3 = 0.0184 mol

Since there is one boron atom in each molecule of BBr3, the number of atoms of boron is the same as the number of molecules of BBr3. We can calculate the number of molecules of BBr3 using Avogadro's number:

number of molecules of BBr3 = moles of BBr3 x Avogadro's number

number of molecules of BBr3 = 0.0184 mol x 6.022 x 10^23/mol

number of molecules of BBr3 = 1.11 x 10^22

Therefore, there are 1.11 x 10^22 atoms of boron in 5.44 grams of BBr3.

Chromium 2 permanganate weighs 1117.12 grams or 2.354E+25 molecules.

Increasing glucose tolerance and enhancing protein, glycogen, and lipid metabolism are two benefits of the crucial trace mineral chromium. People only require very little amounts of this metal coating.

Molar mass of chromium(II) permanganate = (1 x atomic mass of Cr) + (2 x atomic mass of Mn) + (8 x atomic mass of O)

Let's assume the atomic mass of Cr is 52, atomic mass of Mn is 54, and atomic mass of O is 16.

Molar mass of chromium(II) permanganate = (1 x 52) + (2 x 54) + (8 x 16) = 52 + 108 + 128 = 288 g/mol

Moles of chromium(II) permanganate = 2.354 x 10^25 molecules / 6.022 x 10^23 molecules/mol = 3.9 x 10^2 mol

Weight in grams = moles of chromium(II) permanganate x molar mass = 3.9 x 10^2 mol x 288 g/mol = 1117.12 g

So, 2.354 x 10^25 molecules of chromium(II) permanganate weigh approximately 1117.12 grams.

To know more about chromium visit:

https://brainly.com/question/681602

#SPJ1

It is advisable to perform a mixed melting point determination to accurately identify an unknown compound.

If the two compounds have different melting points, then it is likely that they are not the same compound. However, if the two compounds have nearly identical melting points, then it is possible that they are the same compound but with different levels of impurities.

A mixed melting point determination involves testing a sample of each compound together, and if the melting point of the mixture is identical to the melting point of either of the two compounds, then it can be concluded that the two compounds are the same.

Learn more about melting point :

https://brainly.com/question/40140

#SPJ4

The freezing-point depression constant for [tex]CCl_4[/tex] is [tex]397 K/mol[/tex].

The freezing-point depression constant ([tex]Kf[/tex]) is a measure of the decrease in the freezing point of a solvent due to the addition of a solute. It is defined as the change in the freezing point of a solvent per unit of molality of solute particles.

it is a colligative property, meaning it depends on the concentration of solute particles in the solvent, but not on their chemical identity. This makes the freezing-point depression constant a useful tool for determining the molality of a solute in a solution, by measuring the change in the freezing point of the solvent.

Calculation of freezing point depression constant

The freezing-point depression constant ([tex]Kf[/tex]) can be calculated using the equation:

[tex]Kf = ΔHf / (mass of solute per unit volume\times i)[/tex]

where,  [tex]ΔHf[/tex] is the heat of fusion, "i" is the number of particles of solute dissolved in the solvent and the mass of solute per unit volume can be calculated as the molar mass of the solute divided by the molar volume of the solvent at its freezing point.

For [tex]CCl4,[/tex] its molar mass is [tex]153.82 g/mol[/tex] and its molar volume at its freezing point can be calculated as the molar volume of an ideal gas at that temperature, which is approximately [tex]24.45 cm3/mol.[/tex]

The mass of solute per unit volume can be calculated as:

mass of solute per unit volume = molar mass of solute / molar volume of solvent at freezing point

[tex]= 153.82 g/mol / (24.45 cm3/mol) = 6.29 × 10^-4 g/cm3[/tex]

And the number of particles of solute (i) can be assumed to be 1, since [tex]CCl_4[/tex] is a non-electrolyte and does not dissociate into ions in solution.

The freezing-point depression constant can be calculated as:

[tex]Kf = ΔHf / (mass of solute per unit volume \times i)[/tex]

[tex]= 2.5 kJ/mol / (6.29 \times 10^-4 g/cm3 \times 1) = 397 K/mol[/tex]

To know more about Freezing point depression constant, visit:

https://brainly.com/question/27184453

#SPJ1

Answer:

The magnitude of the electric force between two particles depends on the product of their charges and the inverse of the square of their separation distance.

So, the correct answer is:

OB. Charge and distance.

Answer:

The magnitude of the electrostatic force F between two point charges q1 and q2 is directly proportional to the product of the magnitudes of charges and inversely proportional to the square of the distance between them.

When solid goes to liquid, it is called melting. Think of a solid ice cube being melted into liquid water.

Now for particles, for solids, particles are arranged in regular, repeating patterns. For liquid, the molecules lose the arrangement and is now random, but close toward each other. The particles move freely and take the shape of the container.

The boiling point ( in degree Celsius) of solution

of a solution made by dissolving 6.60 g of naphthalene {C₁₀H₈} in 47.1 g of CCl₄ is equals to the 81.91°C.

The naphthalene compound is dissolved in carbon tetrachloride, CCl₄. When naphthalene added to the carbon tetrachloride it will result in higher boiling point compared to the boiling point of a pure carbon tetrachloride (solvent). This is known as the boiling point elevation The equation for the boiling point elevation is:

ΔT= Kb × m

where: ΔT is the change in temperature

First we calculate the molality of the solution

Moles of naphthalene = 6.60 g / 128.17 g per mol = 0.0515 mol

Mass of solvent = 47.1 g ×1 kg / 1000 g = 0.0471kg

Molality = moles / kg solvent

= 0.0515mol / 0.0471 kg

= 1.093 m

∆ Tb = kb ×m

= 4.95 °C per m × 1.093m

= 5.410°C

So the boiling point of the solution is = bp of pure CCl₄ + ∆Tb

= 76.5°C + 5.41°C

= 81.91°C

To learn more about boiling point of elevation, refer:

https://brainly.com/question/23860390

#SPJ4

Answer: Spirit

Explanation:

i looked it up and there was a quizlet that asked the same question.

The information provided tells us that the peptide sequence contains a histidine residue at some position.

This information indicates that the peptide sequence contains a histidine residue, which is covalently modified by FDNB to form 2,4-dinitrophenylhistidine. The fact that the histidine residue is modified by FDNB suggests that it is in the free amino form, rather than being part of an amide or guanidino group.

This is because FDNB reacts with free amino groups, but not with amido or guanidino groups. The presence of a histidine residue in the peptide sequence can provide information about the functional and structural properties of the peptide, as histidine is known to play important roles in protein structure and function.

Learn more about peptide sequence brainly.com/question/30505255

#SPJ4

Other happenings that are also in periods would be: tides and biological rhythms.

There are many things and events that exhibit periodicity, or a repeating pattern over time. Some examples include:

Tides: The rise and fall of sea levels due to the gravitational pull of the moon and the sun on Earth's oceans. Tides follow a predictable pattern and repeat every 12 hours and 25 minutes.

Biological Rhythms: Many living organisms have internal biological clocks that regulate various physiological processes such as sleep, hunger, and hormone secretion. These rhythms repeat in a periodic manner, such as the 24-

Read more on periodic table here:https://brainly.com/question/15987580

#SPJ1

The ratio of A- to HA in blood plasma with a pH of 7.4 would be approximately 2.5119 : 1.

The dissociation reaction of sulfadiazine can be represented as follows:

HA ⇌ H+ + A-

Where HA represents the protonated form of sulfadiazine and A- represents the deprotonated form.

The pKa of sulfadiazine is given as 6.3. This means that at pH values below 6.3, sulfadiazine will predominantly exist in its protonated form (HA), while at pH values above 6.3, it will exist mostly in its deprotonated form (A-).

In blood plasma with a pH of 7.4, the ratio of A- to HA can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

Rearranging this equation, we get:

[A-]/[HA] = 10^(pH - pKa)

Substituting the values given:

[A-]/[HA] = 10^(7.4 - 6.3) = 2.5119

Therefore, the ratio of A- to HA in blood plasma with a pH of 7.4 would be approximately 2.5119 : 1.

Learn more about The ratio of sulfadiazine's:

https://brainly.com/question/29579985

#SPJ4

The cannot form a solid with a lattice based on the sodium chloride structure is E) CuCl2

Since, NaCl is a linear molecule and it contain only two ions. In the given options, NaBr, LiF, RbIl and CuO all are linear molecules and it contain only two ions. So, NaBr, LiF, Rbl and CuO will form similar lattice to the NaCl. On the other hand in case of CuCl, there are total three ions and it is not linear molecule. So, it will form different lattice but not NaCl based lattice.  The crystal lattice of NaCl is face -centered cubic. Sodium Chloride is an alkali halide with an fcc crystal structure. The basis is two ions, a sodium cation and a chlorine anion.

Then the correct option will be (E) CuCl2.

To learn more about face -centered cubic check the link below:

https://brainly.com/question/17111818

#SPJ4

If a particular solution process is endothermic, then it will be accompanied by temperature changes in the disorder of the system.

An endothermic reaction is a chemical reaction in which the reactants have a low enthalpy, but produce products with a high enthalpy. Because the enthalpies of the reactants are low, the system requires additional energy to release bonds so that heat absorption occurs from the surrounding environment to the system. This causes a decrease in temperature in an endothermic reaction.

So if there is a solution that has endothermic properties it will be accompanied by a disturbance of the temperature changes system.

Learn more about the difference between endothermic and exothermic chemical reactions here :

https://brainly.com/question/10373907

#SPJ4

Mole fraction is indeed a unitless phrase since it represents a ratio. Therefore, 0.18 is the mole fraction of  C[tex]_7[/tex]H[tex]_{16}[/tex].

Mole fraction is a concentration unit defined as the amount of moles of a constituent divided by the total amount of moles of a solution. Mole fraction is indeed a unitless phrase since it represents a ratio.

When the mole fractions of all constituents of a solution are put together, the result is 1. The molar ratio of acetone in a solution containing 1 mol toluene, 2 mol tetrachloroethylene, as well as 7 mol acetone is 0.7.

mole fraction of  C[tex]_7[/tex]H[tex]_{16}[/tex] = 1.28/ (1.28+ 2.92+  2.64)=  1.28/ 6.84=0.18

mole fraction of  C[tex]_8[/tex]H[tex]_{18}[/tex]=2.92/ (1.28+ 2.92+  2.64)=2.92/6.84=0.42

mole fraction of  C[tex]_9[/tex]H[tex]_{20}[/tex]= 2.64/ (1.28+ 2.92+  2.64)=2.64/ 6.84 = 0.38

Therefore, 0.18 is the mole fraction of  C[tex]_7[/tex]H[tex]_{16}[/tex].

To learn more about mole fraction, here:

https://brainly.com/question/29808190

#SPJ1

The dots represent the valence electrons, and the elemental symbol represents the nucleus and inner electrons. The number of dots in a Lewis dot structure corresponds to the number of valence electrons in an element, which can be determined from the periodic table.

An elemental symbol surrounded by one dot for each of its valence electrons is called an electron dot diagram or a Lewis dot structure. These diagrams are used to represent the valence electrons of an element and to show how elements bond with each other to form compounds.

Learn more about Lewis dot structure here: https://brainly.com/question/20300458

#SPJ4

The following options describe situations in which hydrogen bonding will be observed between the solute and solvent is Solvent contains OH or NH groups, solute contains N, O, or F atoms. The Solvent and solute both contain OH or NH groups in the process.

It contains the maximum amount of solute that will dissolve in that solvent at that temperature.

Solution= solute+ solvent

The solubility of a solute depends on temperature. A solution containing just the right (maximum) amount of solute that can normally dissolve at a given temperature is said to be saturated. Solvent contains N, O, or F; solute contains OH or NH groups in general.

Learn more about solute:

brainly.com/question/7932885

#SPJ4

The rate constant for a first-order reaction of a certain first-order reaction is 58 percent complete in 65 seconds is [tex]\frac{-\ln\left(\ln\left(0.42\right)\right)}{65}[/tex].

To calculate the rate constant for a first-order reaction, you need to use the following equation:

The reaction progress can be expressed as a fraction of the initial concentration of the reactant:

[tex]\frac{A}{A_0} = 1 - x[/tex]

where x is the fraction of the reaction that has occurred, and in this case, x = 0.58.

Rearranging the above equation to solve for A:

[tex]A = A_0 - A_0x = A_0(1 - x) = A_0 \cdot 0.42[/tex]

The rate constant can be found by using the equation:

[tex]\ln\left(\frac{A_0}{A}\right) = -kt[/tex]

Plugging in the value of A from step 2 into the above equation:

[tex]\ln\left(\frac{A_0}{A_0 \cdot 0.42}\right) = -kt[/tex]

Simplifying the above equation:

[tex]\ln\left(\frac{1}{0.42}\right) = -kt[/tex]

Using the natural logarithm properties to simplify further:

[tex]\ln\left(\frac{1}{0.42}\right) = \ln\left(\frac{1}{e^{-\ln(0.42)}}\right) = \ln\left(e^{\ln(0.42)}\right) = \ln\left(0.42\right)[/tex]

t = 65 seconds

Solving for k:

[tex]k = \frac{-\ln\left(\frac{1}{0.42}\right)}{t} = \frac{-\ln\left(\ln\left(0.42\right)\right)}{65}[/tex]

We do not know the initial concentration [tex]$A_0$[/tex], so we cannot solve for k exactly. However, we can use the calculated value of k to find the concentration of the reactant at any time during the reaction.

Learn more about the first-order reactions:

https://brainly.com/question/22685249

#SPJ4

The following statements about subatomic particles are correct:

B. The charge on a proton is equal in magnitude and opposite in sign to that of an electron

C. The mass of a proton is similar to that of a neutron

D. The mass of a neutron is slightly greater than that of an electron.

Subatomic particles refer to the basic building blocks of matter that make up atoms. The main subatomic particles are:

Protons: Positively charge particles found in the nucleus of an atom. The number of protons in an atom determines the atomic number, and thus the identity, of the element.

Neutrons: Neutral particles found in the nucleus of an atom. The number of neutrons in an atom can vary, resulting in isotopes of the same element.

Electrons: Negatively charged particles that orbit the nucleus of an atom. The number of electrons in an atom determines its chemical properties and reactivity.

These subatomic particles interact with each other through electromagnetic forces to form the atoms and molecules that make up matter. Understanding the behavior and interactions of subatomic particles is key to understanding the properties and behavior of matter on a macroscopic scale.

Learn more about charge here:

https://brainly.com/question/19886264

#SPJ4

Considering the ideal gas law, the gas will ocuppy a volume of 0.0299 L at STP.

An ideal gas is a gas made up of certain particles that, despite having a random displacement, do not interact with each other, having perfect elastic collisions without suffering attraction or repulsion. These gases are known as ideal because they have only been described theoretically, although they are useful for the analysis of real gases.

An ideal gas can be fully described by the ideal gas equation:

P×V = n×R×T

Where:

The STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.

In first place, you know:

Replacing in the ideal gas law:

0.00657895 atm× 5 L = n× 0.082 (atmL)/(molK)× 300 K

Solving:

(0.00657895 atm× 5 L)÷ (0.082 (atmL)/(molK)× 300 K)= n

1.337×10⁻³ moles= n

This number of moles will be the same although you change the pressure and temperature. For STP, you know:

Replacing in the ideal gas law:

1 atm× V= 1.337×10⁻³ moles× 0.082 (atmL)/(molK)× 273 K

Solving:

V= (1.337×10⁻³ moles× 0.082 (atmL)/(molK)× 273 K)÷ (1 atm)

V= 0.0299 L

Finally, the volume will be 0.0299 L.

Learn more about Ideal Gas Law:

https://brainly.com/question/4147359

#SPJ1

SMA membranes with a high concentration of unsaturated (cis) fatty acid chains will be more fluid and dynamic than those with a low concentration of unsaturated fatty acid chains.

This is because the cis configuration of the fatty acid chains creates a bent shape which has a greater effect on the fluidity of the membrane than the straight configuration of saturated fatty acid chains.

Additionally, the increased mobility of the cis fatty acid chains can reduce the rigidity of the membrane, making it more dynamic.

Learn more about Sma membranes:

https://brainly.com/question/1768729

#SPJ4

Answer: B

Explanation:

2 Bd + Ch --> Bd₂Ch

The 2 on the left side of the equation represents 2 separate pieces of bread (answer B).

They are trying to use this illustration to help with understanding stoichiometry in chemistry.

The technique that would not be helpful in the separation of a mixture of sand and salt is O Magnet.

The combination of salt and sand may be separated via way of means of filtration observed via way of means of an evaporation process. Filtration can separate sand from a aggregate of sand and salt solution (salt dissolved in water). Sand remains at the clear out out paper as a residue after filtering. By boiling the filtrate, not unusualplace salt might also additionally now be produced. Probably the perfect approach to split the 2 materials is to dissolve salt in water, pour the liquid far from the sand, after which evaporate the water to get better the salt.

Thus, the correct option is magnet.

To learn more about filtration check the link below:

https://brainly.com/question/23945157

#SPJ4

To construct a 95 percent confidence interval for the mean number of grams of acetanilide that can be recovered from 4.85 grams of aniline, we need to first find the mean, standard deviation, and sample size of the data.

Given the dry yields of 10 specimens, the mean can be calculated as (3.85 + 3.88 + 3.90 + 3.62 + 3.72 + 3.80 + 3.85 + 3.36 + 4.01 + 3.82) / 10 = 3.79 grams. The standard deviation can be calculated using the formula: sqrt(sum of squares of deviations from the mean / (n - 1)), where n is the sample size.

Once we have the mean and standard deviation, we can use the t-distribution to find the 95 percent confidence interval. The t-value can be looked up in a t-table given the degrees of freedom, which is n - 1. The confidence interval is then calculated as mean ± t-value × standard deviation / sqrt(n).

This interval gives us an estimate of the mean yield of acetanilide that we can expect to obtain with a 95 percent confidence. It also gives us an idea of the precision of our estimate, as the width of the interval gives us an idea of the variability in the data.

Learn more about acetanilide:

brainly.com/question/14562247

#SPJ4

You just need to calculate the following to go from kg/hour to kmol/s: For instance, 1 kmol/h should represent 36 kg with 1 kg/s should equal 1/36 kmol/h if there was 3 kmol in 1 kilogram and 12 seconds in 1 hour.

1000 moles make up one kilomole. 1 Mole: Denotes the quantity of a chemical compound that has the same number of atoms as there are in Twelve grams of natural carbon-12. 103 moles are equivalent to one kilogram, or one kilomole, in the SI system of measurement (metrology).

mmol↔kmol 1000000 mmol make up 1 kmol.

To know more about kmol visit:

https://brainly.com/question/13346207

#SPJ1

The reaction equation is; S + O2 --->SO2

We know that when we have a chemical reaction, we have the combination of the reactants so as to have the products of the reaction. In this case we have that the reactants that were combined as oxygen and sulfur.

We must note that in the chemical reaction that the number of the oxygen and the sulfur atoms on the right hand side of the reaction equation must be the same as the number of the oxygen and the sulfur atoms on the left hand side of the reaction equation.

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

Carbon is transferred between the surface and deep ocean through a variety of processes, including vertical mixing and diffusion, upwelling, and biological processes such as photosynthesis, respiration, and excretion.

Vertical mixing and diffusion occur when currents and waves mix the surface and deep water layers, allowing carbon to be transferred from one layer to the other. Upwelling is the process of deep ocean water rising to the surface, bringing with it dissolved carbon from the deep ocean. Finally, biological processes such as photosynthesis, respiration, and excretion also move carbon from the surface to the deep ocean.

Learn more about carbon transferred;

https://brainly.com/question/23031731

#SPJ4

Which of the following are ways carbon is transferred between the surface and deep ocean? select all that apply.

The number of grams of aluminum that will react fully with chlorine gas is 22.5grams.

Stoichiometry refers to the quantitative relationship between the reactants and products of a specific reaction or equation.

According to this question, aluminium reacts with chlorine gas as follows:

2Al + 3Cl₂ → 2AlCl₃

Based on the above reaction, 2 moles of aluminium reacts with 3 moles of chlorine gas.

1.25 moles of chlorine gas will react with 1.25 × ⅔ = 0.83 moles of aluminum.

mass of aluminum = 0.83 × 27 = 22.5grams of aluminum

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Suppose that when you plot the masses of several samples. The density of the object is 2.7 g/mL and it is aluminum.

It is important to keep in mind that the material's density is the ratio of the object's mass to its volume. By plotting the masses of several samples of an unknown substance against the volumes of water displaced by the samples, the case's density was experimentally determined.

The relationship between a substance's mass and the amount of space it occupies (volume) is its density. The density of a substance is determined by the mass, size, and arrangement of its atoms. Density is equal to the material's mass divided by its volume; D = m/v.

Learn more about density:

brainly.com/question/28348989

#SPJ1