In which of the following examples has the oxidation number (O.N.) of the given element been assigned correctly? Select all that apply. a) The O.N. for hydrogen in CuH is+1. b) The O.N. for Mn in KMnO4 is +2.c) The O.N. for chlorine in the ion CLO3- is +5. d) The O.N. for iron in FeO is +2. e) The O.N. for aluminum in Al2O3 is +2.

The number of the atoms of the oxygen are present in the 6 g of the KClO₃ is the 8.6 × 10²²  atom of oxygen.

The compound = KClO₃

The mass of the KClO₃ = 6 grams

The molar mass of the KClO₃  = 122.6 g/mol

The number of the moles = mass / molar mass

The number  of the moles = 6 / 122.6

The number of the moles KClO₃ = 0.048 mol

The  1 mole of   =  3 (6.02 x 10²³ ) atom of oxygen

0.048 mole of  KClO₃ = 0.048 × 3 (6.02 x 10²³ ) atom of oxygen

                                   = 8.6 × 10²²  atom of oxygen

To learn more about atom here

https://brainly.com/question/16475329

#SPJ4

A system that does no work but which receives the heat from the surroundings is, the correct option is (c) q = ΔE.

The relationship between the change in internal energy (ΔE), the heat (q), and the work done (w) are as follows:

ΔE = q + w

If the system does no work, then the value of w = 0. solving the values in equation , the change in internal energy (ΔE)  will be :

ΔE = q + 0

ΔE = q

q = ΔE

Thus, the value of the heat for this system will be q = ΔE .

To learn more about work here

https://brainly.com/question/13264347

#SPJ4

Two hydrogen atoms, one sulfer atom, and four oxygen atoms make up sulfuric acid, also known as H2SO4. Strong, water-soluble, highly polar sulfuric acid is a great solvent. It is used in the creation of detergents and fertilisers, among other things.

Which two purposes does sulfuric acid serve?

Producing fertilisers like superphosphate of lime and ammonium sulphate is the main usage of sulfuric acid. It is frequently utilised in the production of chemicals, such as synthetic detergents, explosives, hydrochloric acid, nitric acid, sulphate salts, dyes & pigments, and pharmaceuticals.

What are the four industrial uses of sulfuric acid?

It is extensively utilised in the production of chemicals, such as nitric acid, sulphate, and hydrochloric acid.

To know more about sulphuric acid visit:

https://brainly.com/question/14962130

#SPJ4

182.29 gm calcium chloride and  267.80 gm water is present in the solution  

In this solution, Calcium Chloride is the solute and water is the solution. Here we are given concentrations by mass.

The total mass of solution =  calcium chloride  mass  +  water  mass

                                       =  450.1 gm

40.5 % of calcium chloride by mass

0.405  x   450.1 = 182.29 gm

100 - 40.5 = 59.5 % of water by mass

0.595  x  450.1 =  267.80 gm  

To learn more about Solute

brainly.com/question/13812915

#SPJ4

D. CH3-C-OH+CH3OH

Ethers are a subclass of organic compounds that have an oxygen atom linked to two carbon atoms, and CH3-C-0-CH3 is one of these molecules.

An alcohol (CH3OH) and an alkoxide are combined to create this ether (CH3-C-OH). Williamson ether synthesis is the name given to the reaction in which an alkoxide intermediate is created and subsequently attacked by alcohol to produce the ether product.

The appropriate reactants for this reaction are shown in Option D, CH3-C-OH + CH3OH. Option A, CH3-C-H + CH3OH, represents a reaction between an alcohol and an alkane (CH3-C-H), which does not result in the formation of an ether. The reaction between an amine and sodium methoxide in option B, CH3-C-NH2 + CH3ONa, will result in a salt rather than an ether.

Learn more about compound here:

https://brainly.com/question/13516179

#SPJ4

The statement that describes what will happen to pH as hydrogen ion concentration increases is: "pH will decrease."

The pH of a solution is a measure of its acidity, and it is defined as the negative logarithm of the hydrogen ion concentration (H+). As the hydrogen ion concentration increases, the pH of the solution decreases, indicating an increase in acidity. Conversely, as the hydrogen ion concentration decreases, the pH increases, indicating a decrease in acidity.

The pH scale is a measure of the acidity or basicity (alkalinity) of a solution. It ranges from 0 to 14, with 7 being neutral. Solutions with a pH less than 7 are considered acidic, while solutions with a pH greater than 7 are considered basic or alkaline.

The hydrogen ion concentration (H+) of a solution is an important factor in determining its pH. As the concentration of hydrogen ions increases, the solution becomes more acidic, and the pH decreases. Conversely, as the concentration of hydrogen ions decreases, the solution becomes less acidic, and the pH increases.

It's important to understand the pH of solutions because it can have a significant impact on chemical reactions and biological processes. For example, the pH of the human body is carefully regulated, and deviations from the normal pH range can lead to serious health problems. Similarly, the pH of soil, water, and other environments can have a profound effect on the survival and growth of plants, animals, and microorganisms.

Learn more about pH scale here:

https://brainly.com/question/1596421

#SPJ4

There are two primary methods for producing ethers: dehydration of alcohols or the Williamson Synthesis.

Williamson's synthesis, which involves reacting an alkoxide with a haloalkane, can be used to make acyclic ethers.

Alcohols dehydrate in the presence of protic acids (sulphuric acid) to produce alkenes and ethers under different conditions.

Dehydration of ethanol at 443 K, for example, yields ethene in the presence of sulphuric acid, whereas it yields ethoxyethane at 413 K.

The most common ether reaction is the cleavage of the C-O bond by strong acids. The ether oxygen is protonated during acidic cleavage to form good leaving groups that can be eliminated as part of an SN2, SN1, or E1 reaction mechanism.

Learn more about Ether here

https://brainly.com/question/29412389

#SPJ4

E. BeCl2 is non-polar molecule. Since Beryllium (1.57) and chlorine (3.16) have different electronegativities, and their difference of 1.59 places them in the polar covalent range.

The electronegativities of these two or more atoms differ just little when it comes to the link between carbon and hydrogen. The C-H bond is considered as nonpolar as a consequence. However, CH3Cl is a polar molecule since this chlorine atom has partial negative charges and a net dipole moment.

The electron density is distributed evenly among polar molecules. A nonpolar molecule is generated when the density of electrons is not evenly distributed. The organization of polar compounds is asymmetric. They share symmetrical polar bonds.

Learn more about nonpolar here:

brainly.com/question/28300881

#SPJ4

Cation Anion Ionic Compound NiCl2 Ni2+ Cl- An ionic compound is a particular kind of chemical compound made up of electrostatically attracted positively charged ions (cations) and negatively charged ions

Nickel and chlorine ions combine to form the inorganic substance nickel(II) chloride (NiCl2). It is a crystalline solid that is greenish-yellow and soluble in water. The positively charged Ni2+ ion combines with anionic ligands to generate coordination compounds like NiCl2, which contains chloride (Cl-). In the industrial setting, nickel is electroplated onto metal surfaces using NiCl2 as a catalyst. Additionally, it is utilised in the manufacture of nickel-cadmium batteries as well as pigment and dye synthesis. When working with the substance, safety measures must be followed because it is dangerous if swallowed or breathed.

Learn more about NiCl2 Ni2+ here:

https://brainly.com/question/15621891

#SPJ4

The volume calculated from displacement in part d is more accurate because the measurement takes into account the air trapped in the cylinder's pores. The volume calculated from length measurements in part a does not take into account the air trapped in the cylinder's pores, so it would be underestimated.

The volume of the metal cylinder is calculated by multiplying the cross-sectional area of the cylinder by its length. If the cylinder is porous, it will contain air pockets that will not be accounted for in the calculation based on length measurements.

The volume calculated from displacement, on the other hand, takes into account the volume of the metal cylinder and the volume of the air trapped in the cylinder's pores. This method provides a more accurate measurement of the volume of the cylinder, as it takes into account all of the space that it occupies, including the air pockets.

To know more about cross-sectional area  click on the link below:

https://brainly.com/question/20532494#

#SPJ11

Considering the information in the Introduction section, the best explanation for this difficulty is the value of the van't Hoff coefficient of the salt must be known.

The Van't Hoff factor (i) is a dimensionless number that is used to describe the degree of dissociation or association of a solute in a solution. It is defined as the ratio of the number of particles in solution to the number of solute molecules added to the solution.

For a solute that dissociates into two or more ions, the Van't Hoff factor is greater than 1, and it is equal to the number of ions produced by the dissociation of one molecule of the solute. For example, if a solute dissociates into two ions, its Van't Hoff factor would be 2.

For a solute that associates to form larger species in solution, the Van't Hoff factor is less than 1. For example, if solute associates to form dimers in solution, its Van't Hoff factor would be 0.5.

Therefore, Considering the information in the Introduction section, the best explanation for this difficulty is the value of the van't Hoff coefficient of the salt must be known.

To know more about van't Hoff coefficient refer to:

brainly.com/question/24598605

#SPJ4

MNi3 is an ionic compound composed of a metal cation (M+) and a polyatomic anion (Ni3-).

In ionic compounds, the metal cation is typically represented by its elemental symbol, such as M in this case, while the anion is represented by its chemical formula, such as Ni3- in this case.

Ionic compounds are formed through the transfer of electrons from a metal to a nonmetal, resulting in the formation of positively charged cations and negatively charged anions. These charged species are held together by electrostatic forces, resulting in the formation of a solid crystal lattice.

In the case of MNi3, the metal cation is positively charged, while the Ni3- anion is negatively charged. These charged species attract each other and form a solid crystal lattice.

It's important to note that the actual identity of the metal cation M can be determined by considering the oxidation state of the metal and the charge on the Ni3- anion. For example, if the metal has an oxidation state of +3 and the Ni3- anion has a charge of -3, the metal cation could be aluminum (Al3+), while if the metal has an oxidation state of +2 and the Ni3- anion has a charge of -3, the metal cation could be magnesium (Mg2+).

In conclusion, ionic compounds are formed by the transfer of electrons between a metal cation and a nonmetal anion, resulting in the formation of positively charged cations and negatively charged anions. These charged species are held together by electrostatic forces, resulting in the formation of a solid crystal lattice. The actual identity of the metal cation can be determined by considering the oxidation state of the metal and the charge on the anion.

To know more about MNi3: https://brainly.com/question/15412778

#SPJ4

Answer:

hydrogen bond

Explanation:

b/c it is bond between hydrogen

The intermolecular forces between an HF molecule and a CH3OH molecule are predominantly hydrogen bonding and dipole-dipole interactions, with the possibility of London dispersion forces also playing a role.

Intermolecular forces are the forces that attract or repel molecules. There are various intermolecular forces at work in the case of a hydrogen fluoride (HF) molecule and a methanol (CH3OH) molecule.

Hydrogen bonding and dipole-dipole interactions are the primary intermolecular forces between the HF and CH3OH molecules. When a hydrogen atom covalently bound to an electronegative atom, such as nitrogen, oxygen, or fluorine, creates an electrostatic bond with another electronegative atom, this is referred to as hydrogen bonding. The hydrogen atom in the HF molecule can create a hydrogen bond with an oxygen atom in the CH3OH molecule in this situation.

Dipole-dipole interactions occur when the positive end of one molecule attracts the negative end of another. The positive hydrogen end of the HF molecule is attracted to the negative oxygen end of the CH3OH molecule in this situation.

There may also be London dispersion forces between the two molecules. The weakest of the intermolecular forces, London dispersion forces, can nonetheless play a role in the interactions between the HF and CH3OH molecules. These forces are caused by brief variations in the electron distribution within a molecule, which can cause an instantaneous dipole in an adjacent molecule.

For more such questions intermolecular forces.

https://brainly.com/question/9007693#

#SPJ11

It is important to properly dry a beaker between trials to ensure accurate measurement of the volume of a solution and to obtain accurate results in chemical experiments and the volume of the hydrogen peroxide solution in trial 3 will be (250 + x) / 1000 liters.

Detailed Explanation:

Accurate measurement of the volume of a liquid in a laboratory setting is crucial for obtaining accurate results in chemical experiments. When a beaker is not properly dried between trials, any residual water or previous solution can alter the volume of the subsequent solution, affecting the calculated molarity.

The molarity of a solution is defined as the number of moles of solute per liter of solution. The formula for calculating molarity is given by:

Molarity (M) = Number of moles of solute/Volume of solution (in liters)

In the case of a 250 ml beaker, the volume of solution is 0.25 liters. If a student fails to dry the beaker between trials 2 and 3, any residual water or previous solution will alter the volume of the hydrogen peroxide solution used in trial 3. This means that the volume of the hydrogen peroxide solution in the beaker will no longer be equal to 250 ml, which will affect the calculated molarity.

Let's say that the volume of the residual water or previous solution in the beaker was x ml. The volume of the hydrogen peroxide solution in trial 3 will now be 250 + x ml. To convert this volume to liters, we divide by 1000, so the volume of the hydrogen peroxide solution in trial 3 will be (250 + x) / 1000 liters.

When we use this new volume in the molarity calculation formula, the calculated molarity will be different from the molarity calculated if the beaker was properly dried. This difference in molarity could affect the validity of the results obtained in trial 3, potentially leading to inaccurate conclusions about the experiment.

Here you can learn more about The molarity

https://brainly.com/question/14210771#

#SPJ11

Doubling the absolute temperature while doubling the pressure changes would cause the volume of a gas to double, assuming moles were held constant.

What is volume?

Volume is a measurement of a three-dimensional object's capacity to contain something. It is usually measured in cubic units such as cubic centimeters (cm3), cubic meters (m3), cubic feet (ft3), and liters (L). It is an important concept in many fields, including physics, chemistry, and mathematics. In physics, volume is often used to measure the amount of physical space occupied by an object or substance. In chemistry, it is used to measure the amount of a specific substance in a given space. In mathematics, volume is often used to calculate the area of a three-dimensional shape. Volume is also used in everyday life, such as to measure the capacity of a container, the size of a room, or the amount of a substance. It is a fundamental concept in many areas of science, engineering, and technology.

To know more about volume visit:

https://brainly.com/question/27100414

#SPJ4

When solution aqueous solutions of Barium chloride and Sodium sulphate are mixed, here Sodium and Chloride ions are spectator ions as their state does not change in this reaction.

Spectator ions in any reactions are the ions who does not participate in the particular reaction. The state of these ions is same throughout the reaction. The charges on these ions remains same they do not get oxidized or reduced. Spectator ions do not get precipitate in any reaction. They can be cancelled from both side of the reaction. When aqueous solutions of Barium chloride and Sodium sulphate reacts, the resultant product will be Barium chloride and Sodium sulphate. It is an example of double displacement reaction.

Learn more about spectator ions here:

https://brainly.com/question/28913274

#SPJ4

Melting, freezing and boiling are the types of physical changes that takes place in our surrounding.

Physical attributes change as a result of a physical change. Physical characteristics include things like melting, turning into a gas, changing strength or durability, changing into crystal form, changing texture, and changing shape, size, colour, volume, or density.

Melting is the process through which a solid transforms into a liquid. The melting point is the degree at which this takes place.

Boiling or vaporisation occurs when a liquid turns into a gas. Once more, the molecules will develop sufficient energy to become free and transform into a gas at a specific temperature known as the boiling point.

Freezing is the process by which a liquid becomes solid. A solid is created when the particles in a liquid lose energy, stop moving, and settle into a stable arrangement as a result of cooling. Because freezing happens at the same temperature as melting, a substance's melting point and freezing point are the same temperature.

To know more about physical changes from the link

brainly.com/question/960225

#SPJ4

The purpose of adding 2 drops of NaOH to the test solution was to neutralize the acidic solution and to determine the amount of acid present in the solution. Adding 2 drops ensured that all the acid was neutralized.

The purpose of adding NaOH (Sodium Hydroxide) to the test solution was to neutralize the acidic solution. NaOH is a strong base that reacts with acids to form a neutral solution (neither acidic nor basic). This reaction is called neutralization. By adding NaOH to the test solution, we can determine the amount of acid present in the solution.

The amount of NaOH added to the test solution is important as it affects the accuracy of the results. If too little NaOH is added, not all of the acid will be neutralized, and the solution will still be acidic. If too much NaOH is added, the solution will become basic and the results will be inaccurate.

Adding 2 drops of NaOH ensured that all the acid was neutralized. The reaction between NaOH and the acid will continue until all the acid has reacted, at which point the solution will become neutral. By adding 2 drops of NaOH, we can be sure that all the acid has reacted and that the solution is neutral. This, in turn, provides us with accurate results.

To know more about neutralization here:

https://brainly.com/question/27891712#

#SPJ11

Without heat capacity we cannot determine

The given information makes it impossible to calculate how the temperature will change when 10.0 grammes of ammonium chloride are added to 1000 mL of water. Numerous variables, including the solution's specific heat, the container's heat capacity, and the velocity of mixing, among others, affect the temperature change. The temperature change that occurred after adding 5.00 grammes of ammonium chloride to 100 mL of water does not always correspond to the temperature change that occurs when a different amount of solute is dissolved in a different volume of solution.

Learn more about ammonium here:

https://brainly.com/question/10834028

#SPJ4

Answer:

Hydrogen bonding

Explanation:

In the case of water, hydrogen bonds form between neighboring hydrogen and oxygen atoms of adjacent water molecules. This is because forces of attraction between individual water molecules creates a bond known as a hydrogen bond.

A water molecule is held together by covalent bonds, with the oxygen atom forming a double covalent bond with each hydrogen atom.

As a result of the oxygen atom's greater electronegativity compared to the hydrogen atoms', a polar covalent connection forms, giving water its distinctive polarity. Due to the production of hydrogen bonds as a result of this polarity, water has a number of special characteristics, including a high surface tension, high boiling and melting points, and the capacity to dissolve a wide variety of compounds. The creation of a network of links between neighboring water molecules as a result of these hydrogen bonds adds to water's stability and enables it to function as a solvent for a variety of ions and polar molecules.

Learn more about water molecule:

brainly.com/question/26529979

#SPJ4

A water molecule is held together by:

a. an ionic bond

b. a single covalent bond

c. a double covalent bond

d. a polar covalent bond

e. hydrogen bonds

Biodiesel has decreased emission of atmospheric carbon than fossil fuels due to the presence of oxygen molecules.

Biofuels have lower carbon emissions than burning fossil fuels because oxygen molecules are present in them and help in complete combustion. Carbon in biodiesel is recently present in the atmosphere while carbon in fossil fuels are formed by action of many geological forces on deep layers of earth over many thousands of years so the carbon is preserved and lack the presence of oxygen.

Fossil Fuels are Hydrocarbons which release Carbon Dioxide on burning. The Carbon recently present in atmosphere is extracted in Biofuels so this cause no net Change in Carbon levels in atmosphere.

Learn more about Biodiesel here:

https://brainly.com/question/27438595

#SPJ4

CHCl3 molecule is polar because of the asymmetric bond distribution that produces a dipole moment and results in a polar molecule.

What is a definition of polarity ?

An object has polarity when it has two distinct, opposing poles that can either attract or repel one another. The phrase is frequently used to describe the movement of electrons in the fields of electricity, magnetism, chemistry, and electronic signaling.

Because chlorine is exerting more of a pull on the electrons that it shares with carbon, CHCl3 is polar. The force atoms exert on shared electrons in a covalent connection is known as electronegativity. In general, an element is more electronegative the closer it is to fluorine on the periodic table.

To learn more about polarity use link below:

https://brainly.com/question/17118815

#SPJ4

Birch reduction of p-xylene likely produced only one organic compound, which is most likely 1,4-dimethylbenzene (also known as p-xylene).

An aromatic compound can be reduced via the Birch reduction, which commonly produces alkyl-substituted aromatic compounds. By reducing the p-xylene molecule in this instance, two methyl groups were added to the benzene ring, resulting in 1,4-dimethylbenzene.

The Birch reduction is a chemical process that uses sodium or lithium in liquid ammonia to decrease aromatic molecules. Alkyl groups are added to the aromatic ring as a result of the reaction, which lowers the electron density and lessens the aromatic nature of the molecule.

To know more about p-xylene refer to:

brainly.com/question/8200202

#SPJ4

Stereoisomers that result from the hindered rotation of a single bond are called "configurational isomers" or "cis-trans isomers".

These isomers share the same chemical structure and bond connectivity, but their spatial arrangements are different. When a molecule has a single bond that is surrounded by bulky groups, preventing rotation around that bond, cis-trans isomers can form. The two isomers will differ in terms of their melting and boiling temperatures as well as their biological activity.

The isomers of amides, such as N-phenylacetamide, and alkenes, such as cis-2-butene and trans-2-butene, are examples of cis-trans isomers. As some enzymes and other biological molecules show specificity for one isomer over another, these isomers can also be significant in biology. Therefore, it is crucial for students of organic and biochemistry to understand the characteristics of cis-trans isomers.

To know more about isomers click here:

brainly.com/question/13422357

#SPJ4

Butanethiol is the given molecule [tex]C_{4} H_{9}SH[/tex]

Intermolecular forces are the forces that act between molecules. Intramolecular forces, on the other hand, act within molecules.

In comparison to intramolecular forces, intermolecular forces are weaker. The London dispersion force, dipole-dipole interaction, ion-dipole interaction, and van der Waals forces are all examples of intermolecular forces.

The strongest intermolecular force between Butanethiol molecules is dipole-dipole interaction. The S-H bond in Butanethiol is a polar bond.

S has a higher electronegative potential than H.

Because of the difference in electronegativity between S and H, partial charges (partial positive charge on H and partial negative charge on S) will form.

One molecule's partial charge attracts the opposite charge of another molecule. These forces of attraction are known as dipole-dipole interactions.

The strongest intermolecular forces present between Butanethiol molecules are dipole-dipole interactions.

Learn more about Molecule here

https://brainly.com/question/14519025

#SPJ4

Nitrogen dioxide (NO2) is a toxic gas composed of nitrogen and oxygen atoms.

What is Nitrogen dioxide (NO2)?

Nitrogen dioxide (NO2) is a toxic gas composed of nitrogen and oxygen atoms. It is a reddish-brown gas with a strong, pungent odor. It is produced by combustion processes and is commonly found in air pollution, especially near heavily populated cities and industrial areas. NO2 has negative impacts on human health and the environment and is a significant contributor to acid rain and smog.

Nitrogen dioxide has limited practical uses, mostly in the production of nitric acid and as a feedstock for the manufacture of fertilizers. However, its major use is as a pollutant, resulting from transportation and industrial activities.

To learn more about Nitrogen dioxide (NO2), visit: https://brainly.com/question/21107983

#SPJ4

The minimum mass that could be left over by the chemical reaction is 6.8 g.

stoichiometric coefficients are added to the reactants and outputs. This is significant because a chemical equation must adhere to the laws of conservation of mass and constant proportions, meaning that both the reactant and product sides of the equation must include the same amount of atoms of each element.

The article discusses two quick and simple ways to balance a chemical equation. The classical balancing approach is the first, and the algebraic balancing method is the second.

The reactants and products of a chemical reaction are represented symbolically in a chemical equation by the appropriate chemical formulas. A chemical equation that illustrates how hydrogen and oxygen react to create water is 2H2 + O2 2H2O.

The portion of the chemical equation on the reactant side is to the left of the symbol and the portion on the product side is to the right of the arrow symbol.

Learn more about chemical equation here: https://brainly.com/question/5880605

#SPJ4

The chemical reaction can create a maximum mass of 5.96 grams of carbon dioxide. The number of atoms present in the reagents and products must match in order for the equation to be balanced.

The following is the balanced reaction between gaseous butane and oxygen: The law of conservation of matter, which states that no atom can be created or destroyed during a chemical reaction, was taken into consideration in order to ensure that the equation was balanced. As a result, the number of atoms present in the reagents and products must match in order for the equation to be balanced. It is feasible to determine the reaction's stoichiometry by understanding the reaction that takes place between the two reagents (that is, the quantities of reagents necessary for a certain number of products to be produced). Additionally, the limiting reagent can be identified if 3.49 g of butane and 7.0 g of oxygen are combined.

Learn more about Balanced reaction here:

https://brainly.com/question/14016990

#SPJ4

The label CORROSIVE on a chemical container indicates that the contents are corrosive, meaning that contact with these materials can cause damage to living tissue and materials.

It is important to exercise caution when handling these materials and to ensure that the containers are well labeled and stored in a safe and secure location.

Corrosive chemicals are substances that can cause damage or destruction to other substances with which they come into contact by means of a chemical reaction. These reactions can occur on contact, or over a period of time. Corrosive chemicals can cause damage to the skin, eyes, respiratory tract, and other parts of the body.

Learn more about chemical container

https://brainly.com/question/29488607

#SPJ4

Answer: the villain arc was real

Explanation: got it right 100% on my test

Answer: material from the Earth's interior is often returned to the surface for study island.