In which number is the value of the underlined digit ten times the value of the bold digit

Answers

Answer 1

Step-by-step explanation:

I don't see any numbers, so I just give you an example :

11

every position in a number is worth 10 times the value of the position to its very right.

so, in e.g. 11

the left 1 is worth 10 times the value of the right 1.


Related Questions

Assume that C(x) is in dollars and x is the number of units produced and sold. For the total-cost function C(x) 0.01x" +0.4x + 50, find ΔC and C'(x) when x-90 and ΔΧΖ 1.

Answers

When x = 90, ΔC = $5.31 and C'(x) = 2.2.
Given the total-cost function C(x) = 0.01x^2 + 0.4x + 50, we'll first find the change in cost (ΔC) and then the derivative of the cost function (C'(x)) when x = 90 and Δx = 1.

To find ΔC when x = 90 and ΔΧΖ = 1, we need to use the formula:
ΔC = C(x + ΔΧΖ) - C(x)
Substituting the values, we get:
ΔC = C(90 + 1) - C(90)
ΔC = C(91) - C(90)
ΔC = [0.01(91)^2 + 0.4(91) + 50] - [0.01(90)^2 + 0.4(90) + 50]
ΔC = 91.31 - 86
ΔC = $5.31
To find C'(x), we need to take the derivative of the total-cost function C(x):
C(x) = 0.01x^2 + 0.4x + 50
C'(x) = 0.02x + 0.4
Substituting x = 90, we get:
C'(90) = 0.02(90) + 0.4
C'(90) = 1.8 + 0.4
C'(90) = 2.2
Therefore, when x = 90, ΔC = $5.31 and C'(x) = 2.2.
Given the total-cost function C(x) = 0.01x^2 + 0.4x + 50, we'll first find the change in cost (ΔC) and then the derivative of the cost function (C'(x)) when x = 90 and Δx = 1.
1. To find ΔC, evaluate C(x + Δx) - C(x) when x = 90 and Δx = 1:
ΔC = C(90 + 1) - C(90) = C(91) - C(90)
2. Now, let's find the derivative of the cost function C(x):
C'(x) = d(0.01x^2 + 0.4x + 50)/dx = 0.02x + 0.4
3. Evaluate C'(x) when x = 90:
C'(90) = 0.02(90) + 0.4 = 1.8 + 0.4 = 2.2
So, ΔC = C(91) - C(90), and C'(x) when x = 90 is 2.2.

To know more about total-cost function visit:

https://brainly.com/question/29262808

#SPJ11

Mt. Mitchell is 6,683 feet tall. If an object is thrown upward from the top of the mountain at an initial upward velocity of 29 feet per second, its height t seconds after it is thrown is modeled by the function h (t) = − 16t² + 29t + 6683. How long until the object reaches the highest point?

Answers

The time taken by the object to reach the highest point is 0.91 seconds.

The given equation for the function h (t) = − 16t² + 29t + 6683 gives the height of an object that is thrown upward from the top of the mountain at an initial upward velocity of 29 feet per second.
To determine the time taken by the object to reach the highest point, we need to find the vertex of the function h (t). The vertex of a quadratic function is given by (-b/2a, f(-b/2a)) where a, b, c are coefficients of the quadratic equation ax² + bx + c = 0. In the given function h (t) = − 16t² + 29t + 6683, we have a = -16, b = 29, and c = 6683.

Therefore, the time taken by the object to reach the highest point is 0.91 seconds

To know more about quadratic equation, click here

https://brainly.com/question/18958913

#SPJ11

Let X have a binomial distribution with n = 240 and p = 0.38. Use the normal approximation to find: (1. ~ 3.)
1. P (X > 83)
(A) 0.8468 (B) 0.8471 (C) 0.8477 (D) 0.8486
2. P (75 ≤ X ≤ 95)
(A) 0.7031 (B) 0.7123 (C) 0.8268 (D) 0.8322
3. P (X < 96)
(A) 0.6819 (B) 0.6944 (C) 0.7163 (D) 0.7265

Answers

We find that P(Z < 0.64) = 0.7389. Therefore, P(X < 96) ≈ 0.7389, which is closest to answer (B) 0.6944.

We have n = 240 and p = 0.38, so we can use the normal approximation to the binomial distribution. We first find the mean and standard deviation of X:

mean = np = 240 × 0.38 = 91.2

standard deviation = sqrt(np(1-p)) = sqrt(240 × 0.38 × 0.62) ≈ 7.53

To find P(X > 83), we standardize 83 as follows:

z = (83 - mean) / standard deviation = (83 - 91.2) / 7.53 ≈ -1.09

Using a standard normal table, we find that P(Z > -1.09) = 0.8621. Therefore, P(X > 83) ≈ 1 - 0.8621 = 0.1379, which is closest to answer (A) 0.8468.

To find P(75 ≤ X ≤ 95), we standardize 75 and 95 as follows:

z1 = (75 - mean) / standard deviation = (75 - 91.2) / 7.53 ≈ -2.14

z2 = (95 - mean) / standard deviation = (95 - 91.2) / 7.53 ≈ 0.50

Using a standard normal table, we find that P(-2.14 ≤ Z ≤ 0.50) = 0.8244 - 0.0162 = 0.8082. Therefore, P(75 ≤ X ≤ 95) ≈ 0.8082, which is closest to answer (C) 0.8268.

To find P(X < 96), we standardize 96 as follows:

z = (96 - mean) / standard deviation = (96 - 91.2) / 7.53 ≈ 0.64

Using a standard normal table, we find that P(Z < 0.64) = 0.7389. Therefore, P(X < 96) ≈ 0.7389, which is closest to answer (B) 0.6944.

Learn more about binomial distribution here:

https://brainly.com/question/31197941

#SPJ11

Which value of a would make the inequality statement true? 9. 53 < StartRoot a EndRoot < 9. 54 85 88 91 94.

Answers

The value of "a" that would make the inequality statement true is 9.54.

The inequality statement is: 9.53 < √a < 9.54

To find the value of "a" that satisfies this inequality, we need to determine the range of values for which the square root of "a" falls between 9.53 and 9.54.

We know that the square root of "a" must be greater than 9.53 and less than 9.54.

So, we can write the inequality as:

9.53 < √a < 9.54

To solve this inequality, we need to square both sides of the inequality:

[tex](9.53)^2 < a < (9.54)^2[/tex]

Simplifying, we have:

90.5209 < a < 90.7216

Therefore, the value of "a" that makes the inequality statement true lies between 90.5209 and 90.7216.

Looking at the provided answer choices (85, 88, 91, 94), we see that none of these values fall within the range 90.5209 and 90.7216.

Hence, the correct value of "a" that makes the inequality statement true is not provided in the given answer choices. It is important to note that the value of "a" would be 9.54, as the square root of 9.54 falls within the specified range.

Learn more about square root here:

https://brainly.com/question/29286039

#SPJ11

If the 100th term of an arithmetic sequence is 389, and its common difference is 4, then:

Answers

If the 100th term of an arithmetic sequence is 389, and its common difference is 4, then the first term of the arithmetic sequence is -7.

For the first term of the arithmetic sequence with the 100th term being 389 and a common difference of 4, you can use the formula for the nth term of an arithmetic sequence:

An = A1 + (n - 1)d

Where An is the nth term (in this case, the 100th term), A1 is the first term, n is the number of terms (100), and d is the common difference (4).

We know that An = 389 and n = 100, so we can plug these values into the formula:

389 = A1 + (100 - 1)4

Now, solve for A1:

389 = A1 + 396

Subtract 396 from both sides:

A1 = -7

So, the first term of the arithmetic sequence is -7.

To know more about arithmetic sequence refer here :

https://brainly.com/question/18289800#

#SPJ11

Find the local quadratic approximation of f at x = xo, and use that approximation to find the local linear approximation of f at xo. Use a graphing utility to graph f and the two approximations on the same screen. f(x) = sin(2x), Xo = phi/4 Enter Approximation Formulas below. Local Quadratic Approx = ______ Local Linear Approx = __________

Answers

The local quadratic approximation of f at x = π4 is Q(x) = √(2)/2 - 2(x - π/4)² and the local linear approximation of f at x = π/4 is L(x) = √(2)/2.

The local quadratic approximation of f at x = xo will use the formula:

Q(x) = [tex]f(xo) + f'(xo)(x - xo) + f''(xo)(x - xo)^{2/2}[/tex]

f'(xo) and f''(xo) are the first and second derivatives of f at xo, respectively.

The derivatives of f(x) = sin(2x):

f'(x) = 2cos(2x)

f''(x) = -4sin(2x)

To evaluate these derivatives at x = xo = π/4:

f'(π/4) = 2cos(π/2)

= 0

f''(π/4) = -4sin(π/2)

= -4

Next, we use these values to find the local quadratic approximation of f at x = π/4:

Q(x) = [tex]f(\pi/4) + f'(\pi/4)(x - \pi/4) + f''(\pi/4)(x - \pi/4)^{2/2[/tex]

= sin(2(π/4)) + 0(x - π/4) - 2(x - π/4)²

= √(2)/2 - 2(x - π/4)²

The local linear approximation of f at xo = π/4 simply use the first two terms of the quadratic approximation formula:

L(x) = f(π/4) + f'(π/4)(x - π/4)

= sin(2(π/4)) + 0(x - π/4)

= √(2)/2

We can graph these functions along with the original function using a graphing utility.

The graph shows that the local quadratic approximation Q(x) is a better fit to the function f(x) than the local linear approximation L(x) in the neighborhood of x = π/4.

For similar questions on quadratic

https://brainly.com/question/29015584

#SPJ11




Andre says he can find the length of the third side of triangle


ABC and it is 5 units. Mai disagrees and thinks that the side


length is unknown. Do you agree with either of them? Show or


explain your reasoning

Answers

We need more information about the lengths of the other two sides of the triangle to determine whether Andre or Mai is correct. Without this information, we cannot agree with either of them.

Given that Andre and Mai are discussing the third side of a triangle ABC and Andre thinks that the length of the third side is 5 units, whereas Mai disagrees and thinks that the side length is unknown.To check whether Andre is correct or Mai, we need to apply the triangle inequality theorem.The triangle inequality theorem states that the sum of the lengths of any two sides of a triangle must be greater than the third side. In other words, c < a + b, where c is the length of the longest side (also known as the hypotenuse) and a and b are the lengths of the other two sides. If c is greater than or equal to a + b, then the three sides cannot form a triangle.

Now, let's assume that sides AB, AC, and BC have lengths a, b, and c, respectively. Then, we can represent the triangle inequality theorem for these sides as c < a + b, a < b + c, and b < a + c.Now, let's compare the given side length of 5 units with the sum of the other two sides. If the sum of the other two sides is greater than 5, then Andre is right, and if it is less than 5, then Mai is right. However, if the sum of the other two sides is equal to 5, then either Andre or Mai could be right (since it is a degenerate triangle).

Therefore, we can conclude that we need more information about the lengths of the other two sides of the triangle to determine whether Andre or Mai is correct. Without this information, we cannot agree with either of them.

Learn more about triangle here,

https://brainly.com/question/30104125

#SPJ11

Viggo is 9 years old and his sister Wren is 6 years old. €75 is divided between them in the ratio of their ages. How much money does Viggo get ?

Answers

Given that Viggo is 9 years old and his sister Wren is 6 years old. And €75 is divided between them in the ratio of their ages. We need to find out how much money Viggo will get.

To find the amount of money Viggo gets, we need to understand the concept of ratio. Ratio is the quantitative relation between two numbers showing the number of times one value contains or is contained within the other. To find the amount of money Viggo gets, we need to find out the ratio of his age to the total age of both Viggo and Wren.

Age of Viggo = 9 years Age of Wren = 6 years Total age of both = 9 + 6 = 15So, the ratio of Viggo's age to the total age of both is 9 : 15 or 3 : 5.Now, we can divide the €75 in the ratio 3 : 5. This is done by dividing the total amount into 3 + 5 = 8 parts. Then, the amount that Viggo gets can be found by multiplying his share (3 parts) with the total amount (€75) and dividing by the total number of parts (8).Amount received by Viggo = (3/8) × €75= €28.The amount of money that Viggo will get is €28.

Know more about quantitative relation here:

https://brainly.com/question/29844749

#SPJ11

prove that the intersection of any two distinct eigenspaces of a matrix a is {0}.

Answers

We have proved that the intersection of any two distinct eigenspaces of a matrix A is {0}.

Let A be a square matrix and let v and w be two distinct eigenvectors of A associated with distinct eigenvalues λ and μ, respectively, such that Av = λv and Aw = μw. We need to show that the intersection of the eigenspaces of v and w, denoted by E(λ) and E(μ), respectively, is {0}.

Suppose there exists a nonzero vector u in the intersection of E(λ) and E(μ), i.e., u ∈ E(λ) ∩ E(μ). Then, by definition, Au = λu and Au = μu. Thus, we have λu = μu, which implies (λ - μ)u = 0. Since λ and μ are distinct, we have (λ - μ) ≠ 0. Therefore, we must have u = 0, which contradicts the assumption that u is nonzero. Thus, the intersection of E(λ) and E(μ) must be {0}.

Therefore, we have proved that the intersection of any two distinct eigenspaces of a matrix A is {0}.

for such more question on intersection

https://brainly.com/question/11589195

#SPJ11

Let A be an n x n matrix and let λ1 and λ2 be distinct eigenvalues of A with corresponding eigenvectors v1 and v2, respectively. We want to show that the intersection of the eigenspaces E1 and E2 is {0}, where E1 and E2 are the eigenspaces corresponding to λ1 and λ2, respectively.

Since λ1 and λ2 are distinct eigenvalues, their difference λ1 - λ2 is nonzero. Therefore, we have u = 0, which contradicts the assumption that u is non-zero. Hence, the intersection of any two distinct eigenspaces of A is {0}.

Learn more about matrix here : brainly.com/question/29132693

#SPJ11

Vector a is expressed in magnitude and direction form as a = (V30, 110°). What is the component form a? Enter your answer, rounded to the nearest hundredth, by filling in the boxes.

Answers

The component form of vector a is approximately (-10.26, 25.86).

To find the component form of vector a, we need to use trigonometry.

The magnitude V of the vector a is given by the first component of the magnitude and direction form, which is V = 30.

The angle θ between the vector and the positive x-axis is given by the second component of the magnitude and direction form, which is 110°.

To find the x-component, we use the formula:

x = V cos(θ)

Substituting the values we get:

x = 30 cos(110°) ≈ -10.26

To find the y-component, we use the formula:

y = V sin(θ)

Substituting the values we get:

y = 30 sin(110°) ≈ 25.86.

For similar question on vector.

https://brainly.com/question/30556898

#SPJ11

An airplane flies horizontally from east to west at 290 mi/hr relative to the air. If it flies in a steady 32 mi/hr wind thatblows horizontally toward the southwest ( 45 degrees south of west) find the speed and direction of the airplane relative to the ground.
The speed of the airplane is approximately ? mi/hr
simplify answer
The direction is ?

Answers

The direction of the airplane relative to the ground is therefore:

θ ≈ arccos(0.994) ≈ 5.22° south of west.

We can use vector addition to solve the problem. Let's assume that the positive x-axis is eastward and the positive y-axis is northward. Then the velocity of the airplane relative to the air is:

v_airplane = 290i

where i is the unit vector in the x-direction. The velocity of the wind is:

v_wind = -32cos(45°)i - 32sin(45°)j

where j is the unit vector in the y-direction. The negative sign indicates that the wind blows toward the southwest. Now we can add the two velocities to get the velocity of the airplane relative to the ground:

v_ground = v_airplane + v_wind

v_ground = 290i - 32cos(45°)i - 32sin(45°)j

v_ground = (290 - 32cos(45°))i - 32sin(45°)j

v_ground = 245.4i - 22.6j

The speed of the airplane relative to the ground is the magnitude of v_ground:

|v_ground| = sqrt((245.4)^2 + (-22.6)^2) ≈ 246.6 mi/hr

The direction of the airplane relative to the ground is given by the angle between v_ground and the positive x-axis:

θ = arctan(-22.6/245.4) ≈ -5.22°

Note that the negative sign indicates that the direction is slightly south of west. Alternatively, we can use the direction cosine ratios to find the direction:

cos(θ) = v_ground_x/|v_ground| = 245.4/246.6 ≈ 0.994

sin(θ) = -v_ground_y/|v_ground| = -22.6/246.6 ≈ -0.091

The direction of the airplane relative to the ground is therefore:

θ ≈ arccos(0.994) ≈ 5.22° south of west.

Learn more about direction here:

https://brainly.com/question/13899230

#SPJ11

prove that a group of order 63 must have an element of order 3

Answers

To prove that a group of order 63 must have an element of order 3, we can use the Sylow theorems.

First, we know that 63=3^2*7, so the number of Sylow 3-subgroups is either 1 or 7. If there is only one Sylow 3-subgroup, then it is normal and we are done, since it contains an element of order 3.
If there are 7 Sylow 3-subgroups, then each contains 2 elements of order 3 (since the only elements of order 1 are the identity, and the only elements of order 2 must be in the Sylow 2-subgroup, which has order 2^3=8, not 63). Therefore, we have at least 14 elements of order 3.
But we know that the identity element is one of these elements, so there are at least 13 non-identity elements of order 3. Moreover, any two distinct Sylow 3-subgroups intersect trivially, so these 13 non-identity elements must be distinct.
Therefore, the group of order 63 must have an element of order 3.

To know more about Sylow Theorems visit:
https://brainly.com/question/27901568
#SPJ11

How many degree does a minute hand of a clock turn through from 6:20am to 7:00am same day

Answers

The minute hand of a clock turns through 240 degrees from 6:20 am to 7:00 am on the same day.

To determine the number of degrees the minute hand of a clock turns from 6:20 am to 7:00 am on the same day, we need to calculate the elapsed time in minutes and convert it to degrees.

From 6:20 am to 7:00 am, there are 40 minutes elapsed.

In a clock, the minute hand completes a full revolution (360 degrees) in 60 minutes. Therefore, in one minute, the minute hand turns 360 degrees / 60 minutes = 6 degrees.

Now, we can calculate the degrees the minute hand turns from 6:20 am to 7:00 am:

Degrees = Minutes × Degrees per minute

Degrees = 40 minutes × 6 degrees per minute

Degrees = 240 degrees

So, the minute hand of a clock turns through 240 degrees from 6:20 am to 7:00 am on the same day.

Learn more about number of degrees here:

https://brainly.com/question/27571196

#SPJ11

Prove that there are no integers, a, b∈Z such that a^(2) = 3b^(2) + 2015.

Answers

Okay, here is the proof that no integers a and b will satisfy the equation a^2 = 3b^2 + 2015:

1) We can rewrite the LHS as a^2 = a * a, where a is an integer. The RHS (3b^2 + 2015) is a multiple of 3 plus 2015. So a * a must also be a multiple of 3 plus 2015 for any integer solutions.

2) The only perfect squares that fit this form are 0, 3, 12, 21, 30, 39, 48, 57, 66, 72, 79, 84, 87, 90, 99, ... (multiples of 3 plus 2015). None of these are equal to 3b^2 for any integer b.

3) Let's suppose a = 3k for some integer k. Then 9k^2 = 3b^2 + 2015. But 3 does not divide 9k^2 except when k = 0, and 0^2 does not equal 3b^2 + 2015 for any b. Contradiction.

4) Let's suppose a = 3k+1 for some integer k. Then (3k+1)^2 = 3b^2 + 2015. But (3k+1)^2 is always 1 more than a multiple of 3, while 3b^2 + 2015 is a multiple of 3 plus 2015. Contradiction.

5) Let's suppose a = 3k+2 for some integer k. Then (3k+2)^2 = 3b^2 + 2015. But (3k+2)^2 is always 4 more than a multiple of 3, while 3b^2 + 2015 is a multiple of 3 plus 2015. Contradiction.

In all cases, we reach a contradiction. Therefore, there are no integer solutions for a and b that satisfy the original equation a^2 = 3b^2 + 2015.

Let me know if any part of this proof is unclear! I can provide more details or examples if needed.

find the unit vector in the direction of v. v = -6.9i 3.3j

Answers

Answer:

[tex]< -0.902, 0.431 >[/tex]

Step-by-step explanation:

The unit vector of any vector is the vector that has the same direction as the given vector, but simply with a magnitude of 1. Therefore, if we can find the magnitude of the vector at hand, and then multiply [tex]\frac{1}{||v||}[/tex], where ||v|| is the magnitude of the vector, then we can find the unit vector.

Remember the magnitude of the vector is nothing but the pythagorean theorem essentially, so it would be [tex]\sqrt{(-6.9)^{2} +(3.3)^{2} } ,[/tex] which will be [tex]\sqrt{58.5}[/tex]. Now let us multiply the vector by 1 over this value, and rationalize to make your math teacher happy.[tex]< -6.9, 3.3 > * \frac{1}{\sqrt{58.5}} = < \frac{-6.9\sqrt{58.5} }{58.5} , \frac{3.3\sqrt{58.5}}{58.5} >[/tex]

You can put those values into your calculator to approximate and get

[tex]< -0.902, 0.431 >[/tex]

You can always check the answer by finding the magnitude of this vector, and see that it is equal to 1.

Hope this helps


What is the domain of the function?

A. (-∞, 1]

B. [-1, 1]

C. [1, ∞)

D. (-∞, ∞)

Answers

The domain of the function is (-∞, ∞).

Option D is the correct answer.

We have,

From the graph,

The domain is the x-values.

So,

The function in the graph has three lines.

Each line has different domain values.

Now,

First line.

Domain = (-∞, -1]

Second line.

Domain = [-1, 1]

Third line.

Domain = [1, ∞]

Now,

We combine all the domains.

So,

= (-∞, -1] U {-1, 1} U [1, ∞)

= (-∞, ∞)

Thus,

The domain of the function is (-∞, ∞).

Learn more about functions here:

https://brainly.com/question/28533782

#SPJ1

are utilized to make inferences about certain population parameters; a. samplesb. equationsc. statisticsd. metrics

Answers

The term utilized to make inferences about certain population parameters is a) samples.

In statistical analysis, samples are a subset of a larger population that are selected for observation and analysis. By studying the sample, statisticians can make inferences about the larger population from which it was drawn. This allows for predictions to be made about the entire population, based on information gathered from a smaller subset.

Equations and metrics are important in statistical analysis, but they are not used to make inferences about population parameters. Equations are used to model relationships between variables and to test hypotheses, while metrics are used to quantify the properties of data sets.

Statistics, on the other hand, is the branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of data. Statistics is used to make sense of data and to draw conclusions about the larger population from which the sample was drawn.

In summary, samples are an important tool for statisticians to make inferences about certain population parameters, and statistics is the field that studies these methods of data analysis.

Therefore, the correct answer is a) samples.

Learn more about data analysis here: https://brainly.com/question/30156066

#SPJ11

what are the arithmetic and geometric average returns for a stock with annual returns of 22 percent, 9 percent, −7 percent, and 13 percent?

Answers

The arithmetic average return is found by adding up the returns and dividing by the number of years:

Arithmetic average = (22% + 9% - 7% + 13%) / 4 = 9.25%

To find the geometric average return, we need to use the formula:

Geometric average = (1 + R1) x (1 + R2) x ... x (1 + Rn) ^ (1/n) - 1

where R1, R2, ..., Rn are the annual returns.

So for this stock, the geometric average return is:

Geometric average = [(1 + 0.22) x (1 + 0.09) x (1 - 0.07) x (1 + 0.13)] ^ (1/4) - 1

                  = 0.0868 or 8.68%

Therefore, the arithmetic average return is 9.25% and the geometric average return is 8.68%.

To know more about arithmetic and geometric average  refer here:

https://brainly.com/question/18820506

SPJ11

Realize that questions have many subparts. For this homework please make sure that vour steps are clearly labeled and explained. Also, make sure to tabel everything on your graphs clearly. 1- Answer the following questions. Realize that some of them are True/False, some are multiple choice and some are multiple answers. a. All linear programming problems should have a unique solution, if they can be solved. True/false b. Binding constraints are constraints that hold as an equalify at the optimal solution. True/false c. Nonbinding constraints will always have slack, which is the difference between the two sides of the inequality in the constraint equation. True/false d. When using the graphical solution method to solve linear programming problems, the set of points that satisfy all constraints is called the reejon. i. optimal it. feasible iii. constrained iv. logical e. Consider the following linear peogramming problem: Maximize: 5x1​+5x2​ Subject to: x1​+2x2​≤8x1​+x2​≤6x1​,x2​≥0​ The above linear programming problem i. has onliy one optimal solution. ii. is infeasible iii. is unbounded iv. has more than one optimai solution ODr. Kezban Yagci Sokat BUS2 190 Hint: You do not have to graph to solve the question, If you are able to find out the similarity to one of the class questions, that should help you find the answer very quicklyl. f. Which of the following statements are correct? (Select all apply) i. In some cases, a linear programming problem can be formulated such that the objective can become infinitely large (for a maximization problem) or infinitely small (for a minimization problem). ii. When modeling an optimization problem, the first step is to write the constraints. iii. If a manufacturing process takes 3 hours per unit of x and 5 hours per unit of y and a maximum of 100 hours of manulacturing process time are available, then the mathematical formulation of this constraint is 3x+5y≤100 iv. When we are writing a demand constraint, we use s.

Answers

(a) The given statement "All linear programming problems should have a unique solution, if they can be solved." is false.

(b) The given statement "Binding constraints are constraints that hold as an equality at the optimal solution." is true.

(c) The given statement "Nonbinding constraints will always have slack, which is the difference between the two sides of the inequality in the constraint equation." is true.

a. The statement "All linear programming problems should have a unique solution, if they can be solved." is false because linear programming problems can have multiple optimal solutions or even no solution in some cases.

b. The statement "Binding constraints are constraints that hold as an equality at the optimal solution." is true because binding constraints are constraints that hold as an equality at the optimal solution.

c. The statement "Nonbinding constraints will always have slack, which is the difference between the two sides of the inequality in the constraint equation." is true because Nonbinding constraints will always have slack, which is the difference between the two sides of the inequality in the constraint equation.

d. ii. When using the graphical solution method to solve linear programming problems, the set of points that satisfy all constraints is called the feasible region.

e. iv. The above linear programming problem has more than one optimal solution.

f. The correct statements are:
  i. In some cases, a linear programming problem can be formulated such that the objective can become infinitely large (for a maximization problem) or infinitely small (for a minimization problem).
  iii. If a manufacturing process takes 3 hours per unit of x and 5 hours per unit of y and a maximum of 100 hours of manufacturing process time are available, then the mathematical formulation of this constraint is 3x+5y≤100.

To learn more about linear programming visit : https://brainly.com/question/14309521

#SPJ11

Jamal had $2500, some of which he deposited in a mutual fund account paying 8%. The rest he deposited in a money market account paying 2%. How much did he deposit in each account if the total annual interest was $152?

Answers

Therefore, the amount deposited in the mutual fund account is $1700 and the amount deposited in the money market account is $800.

Let the amount deposited in the mutual fund account be x.

Therefore, the amount deposited in the money market account will be $2500 - x.

The interest earned on the amount deposited in the mutual fund account is 8%.

Therefore, the interest earned on the amount deposited in the mutual fund account will be 0.08x.

The interest earned on the amount deposited in the money market account is 2%.

Therefore, the interest earned on the amount deposited in the money market account will be

0.02($2500 - x) = 50 - 0.02x.

The total annual interest was $152.Thus,0.08x + 50 - 0.02x = 152

Simplify the above expression to get,0.06x = 102x = 1700

Therefore, Jamal deposited $1700 in the mutual fund account. And, $800 ($2500 - $1700) in the money market account.

You can verify the above solution as follows:$1700 × 0.08 + $800 × 0.02= $136 + $16= $152

To know more about interest visit

https://brainly.com/question/30393144

#SPJ11

Find the sum of this convergent series by using a well-known function. Identify the function and explain how you obtained the sum, manipulating your expression. ·?

Answers

A convergent series is a series in which the sum of its terms approaches a finite value as the number of terms increases to infinity. There are various methods for determining the sum of a convergent series, including the use of well-known functions such as geometric series, telescoping series, and power series.

For example, the sum of a geometric series with first term a and common ratio r can be found using the formula:

S = a/(1-r)

where S is the sum of the series. This formula can be derived by manipulating the expression for the sum of an infinite geometric series:

S = a + ar + ar^2 + ar^3 + ...

Multiplying both sides by r gives:

rS = ar + ar^2 + ar^3 + ar^4 + ...

Subtracting the second equation from the first gives:

S - rS = a

Solving for S gives the formula above.

In summary, well-known functions can be used to sum convergent series by manipulating the expressions for the series and applying appropriate formulas.

The correct question should be :

Find the sum of this convergent series by using a well-known function. Identify the function and explain how you obtained the sum, manipulating your expression.

∑(-1)ⁿ⁺¹(1/3ⁿn)

To learn more about convergent series visit : https://brainly.com/question/15415793

#SPJ11

Consider the system X' = [-1 1 -4 -1] X Find the fundamental matrix (t) satisfying (0) = I, where I is the identity matrix Use (t) to solve the IVP where X(0) = [3 1]

Answers

The fundamental matrix (t) satisfying (0) = I is X(t)= 3X1(t) + X2(t) + 3X3(t) + X4(t).

To find the fundamental matrix for the given system, we need to find the solutions to the system with initial conditions given by the columns of the identity matrix.

Since we have a system of linear differential equations, we can use matrix exponential to find the solutions.

The matrix exponential of a matrix A is defined as

=> [tex]e^A = I + A + (A^2)/2! + (A^3)/3! + ...,[/tex]

where Aⁿ represents the n-th power of matrix A and n! is the factorial of n. Using the matrix exponential, we can write the fundamental matrix as (t) = [tex]e^At[/tex].

To find (t), we need to find the coefficient matrix A. In our case, A = [-1 1 -4 -1].

Therefore,

[tex]e^{At} = I + At + (A^2)t^2/2! + (A^3)t^3/3! + ...\\ e^{At} = I + [-1 1 -4 -1]t + [-1 2 3 2]t^2/2! + [3 -1 -10 -5]t^3/3! + ...[/tex]

Now, we can use the fundamental matrix (t) to solve the initial value problem X(0) = [3 1]. The solution to the system is given by X(t) = (t)X(0). Therefore,

[tex]X(t) = (t)[3 1] = [X1(t) X2(t) X3(t) X4(t)][3 1] \\X(t)= 3X1(t) + X2(t) + 3X3(t) + X4(t).[/tex]

To know more about matrix here

https://brainly.com/question/28180105

#SPJ4

use parametric equations and simpson's rule with n = 8 to estimate the circumference of the ellipse 16x^2 4y^2 = 64. (round your answer to one decimal place.)

Answers

Thus, parametric equation for the circumference of the ellipse : C ≈ 15.3.

To estimate the circumference of the ellipse given by the equation 16x^2 + 4y^2 = 64, we first need to find the parametric equations. Let's divide both sides of the equation by 64 to get:
x^2 / 4^2 + y^2 / 2^2 = 1

Now, we can use the parametric equations for an ellipse:
x = 4 * cos(t)
y = 2 * sin(t)

Now, we can find the arc length function ds/dt. To do this, we'll differentiate both equations with respect to t and then use the Pythagorean theorem:

dx/dt = -4 * sin(t)
dy/dt = 2 * cos(t)

(ds/dt)^2 = (dx/dt)^2 + (dy/dt)^2 = (-4 * sin(t))^2 + (2 * cos(t))^2

Now, find ds/dt:
ds/dt = √(16 * sin^2(t) + 4 * cos^2(t))

Now we can use Simpson's rule with n = 8 to estimate the circumference:
C ≈ (1/4)[(ds/dt)|t = 0 + 4(ds/dt)|t=(1/8)π + 2(ds/dt)|t=(1/4)π + 4(ds/dt)|t=(3/8)π + (ds/dt)|t=π/2] * (2π/8)

After plugging in the values for ds/dt and evaluating the expression, we find:
C ≈ 15.3 (rounded to one decimal place)

Know more about the parametric equation

https://brainly.com/question/30451972

#SPJ11

the best line is the least squares line because it has the largest sum of squares error (sse) group of answer choices true false

Answers

False. The best line is the least squares line because it minimizes the sum of squared errors (SSE). This means that the least squares line provides the best fit for the data by minimizing the difference between observed and predicted values.

The least squares line is actually the line that has the smallest sum of squares error (SSE) is incorrect.

The SSE measures the difference between the actual values and the predicted values of the response variable. The least squares line is determined by minimizing the SSE, which means finding the line that provides the best fit to the data.To understand why the least squares line has the smallest SSE, imagine that you have a set of data points and you want to fit a line to these points. If you choose a line that is very close to the data points, then the SSE will be small. On the other hand, if you choose a line that is far away from the data points, then the SSE will be large.The least squares line is also known as the regression line, and it is commonly used in regression analysis. This line is calculated by finding the slope and intercept that minimize the SSE. Once you have the least squares line, you can use it to predict the value of the response variable for any given value of the explanatory variable.In conclusion, the statement that the best line is the least squares line because it has the largest sum of squares error (SSE) is false. The least squares line is actually the line that has the smallest SSE, and it is the line that provides the best fit to the data.

Know more about the least squares line

https://brainly.com/question/14563186

#SPJ11

or kindergarten children, their heights are approximately normally distributed about a mean of 39 inches and a standard deviation of 2 inches. If 32 kindergarten children are randomly selected, find the probability that their mean height is between 38.5 and 40 inches.

Answers

The probability that height of 32 children is 0.7011 or 70.11%.

How to find the probability that height is between 38.5 and 40 inches?

The sample mean of a large number of independent and identically distributed random variables follows a normal distribution with mean μ and standard deviation [tex]\sigma/\sqrt(n)[/tex] due to the Central Limit Theorem.

Where μ is the population mean, σ is the population standard deviation, and n is the sample size.

In this case, we are given that the heights of kindergarten children are approximately normally distributed with a mean of 39 inches and a standard deviation of 2 inches.

Since the sample size is 32, we can use the CLT to find the probability that their mean height is between 38.5 and 40 inches.

First, we need to standardize the sample mean using the formula:

[tex]z = (x - \mu) / (\sigma/ \sqrt(n))[/tex]

where x is the sample mean, μ is the population mean, σ is the population standard deviation, and n is the sample size.

Substituting the given values, we get:

[tex]z1 = (38.5 - 39) / (2 / \sqrt(32)) = -1.06[/tex]

[tex]z2 = (40 - 39) / (2 / \sqrt(32)) = 1.06[/tex]

Next, we need to find the probability that the sample mean falls between z1 and z2. We can use a standard normal distribution table or a calculator to find this probability.

Using a standard normal distribution table or a calculator, we find that the probability that a standard normal random variable falls between -1.06 and 1.06 is approximately 0.7011.

Therefore, the probability that the mean height of 32 kindergarten children is between 38.5 and 40 inches is approximately 0.7011 or 70.11%.

Learn more about probability

brainly.com/question/30034780

#SPJ11

Write out a story, poem statement or fiction story using the numbers from the PI symbol. Each letter should be the same syllable as the digit in the decimal.



Example: 3. 14



Your first word should have 3 syllables because the first digit in pi is a 3



Your second word should have 1 syllable because your second number is a 1



Example : Together , we.



Together is my 3 syllable word



We is my 1 syllable word



I need help I need this done by tomorrow

Answers

Pi is an irrational number, for those that don't know, with its decimals going on and on without repeating. However, did you know that you can make a story out of its digits?

Below is a story using the decimals of pi from 3.141 to 3.1415926.The sun was high up in the sky, With a gentle breeze blowing by. The birds flew off into the blue, And suddenly a pie came into view. Beneath its crust was something nice, Apples, berries, and some spice.

A cup of tea would be just right, To sit and eat this summer delight! So come and join me if you can, For an afternoon that's quite grand! We will sit and chat away, As we enjoy this pie today!

Know more about Pi is an irrational number here:

https://brainly.com/question/11305198

#SPJ11

Refer to the discussion of the symmetric top in Section 11.11. Investigate the equation for the turning points of the nutational motion by setting in Equation 11.162. Show that the resulting equation is a cubic in cos θ and has two real roots and one imaginary root for θ.

Answers

The turning points of nutational motion in a symmetric top, as discussed in Section 11.11. In Equation 11.162, you're asked to set the time derivative equal to zero to investigate the turning points.

By setting the time derivative to zero, we'll be able to find the stationary points of the motion, which correspond to the turning points. The equation becomes a cubic equation in cos θ, with coefficients dependent on the physical properties of the symmetric top and the initial conditions.Since a cubic equation can have at most three distinct roots, we need to show that there are two real roots and one imaginary root for θ. In general, a cubic equation can have either three real roots or one real root and two complex conjugate roots. The latter case occurs when the discriminant of the cubic equation is negative, indicating that there are no more than two real roots for cos θ.For a symmetric top, the physical properties and initial conditions ensure that the discriminant is negative, so the resulting cubic equation in cos θ will have two real roots and one imaginary root. These roots correspond to the turning points of the nutational motion, where the motion changes direction.

Learn more about nutational here

https://brainly.com/question/27642503

#SPJ11

a) Let Y1, Y2 be independent standard normal random variables. Let U = Y12 + Y22 .
i. Find the mgf of U
ii. Identify the "named distribution" of U, and specify the value(s) of its parameter(s)
b) Let Y1 ∼ Poi(λ1) and Y2 ∼ Poi(λ2). Assume Y1 and Y2 are independent and let U = Y1 + Y2
i. Find the mgf of U
ii. Identify the "named distribution" of U and specify the value(s) of its parameter(s)
c) Find the pmf of (Y1 | U = u), where u is a nonnegative integer. Identify your answer as a named distribution and specify the value(s) of its parameter(s)

Answers

a) U = Y1^2 + Y2^2 follows a chi-squared distribution with two degrees of freedom, b) U = Y1 + Y2 follows a Poisson distribution with parameter λ1 + λ2, and c) Y1 | U=u follows a binomial distribution with parameters u and λ1 / (λ1 + λ2).

a), we use the fact that the sum of squares of two independent standard normal random variables follows a chi-squared distribution with two degrees of freedom. We use the moment generating function to derive this result.

b), we use the fact that the sum of two independent Poisson random variables follows a Poisson distribution with the sum of the individual parameters as its parameter. We derive the moment generating function of the sum of two Poisson random variables and use it to identify the distribution of U.

c), we use the conditional probability formula to find the[tex]pmf[/tex]of Y1 given U=u. We substitute the pmf of the Poisson distribution and simplify the expression to identify the distribution of Y1 | U=u. We note that the binomial distribution arises because we are considering the number of successes (i.e., Y1=k) in u independent trials with probability of success λ1 / (λ1 + λ2).

Learn more about distribution here:

https://brainly.com/question/29664127

#SPJ11

this stem and leaf diagram shows the number of students who go to various after school clubs what is the smallest number of students who go to one of these clubs

Answers

The smallest number of students who go to one of the clubs in the stem and leaf diagram is 14 students.

How to find the number of students ?

A stem-and-leaf plot is a visualization scheme that can be used to show a set of numerical values. It functions as an efficient way to present the information by highlighting the big picture with the highest place value in one column (the stem) and the next lower place value in another (the leaf).

The smallest number on a stem and leaf plot is the number that is the first stem and the first leaf.

The first stem is 1 and the first leaf is 4 which means that the smallest number of students going to one club is 14 students.

Find out more on stem and leaf plots at https://brainly.com/question/29740594

#SPJ1

Compute the determinant of the following elementary matrix. 1 0 0 0 1 0 0 0 -k 1 0 0 0 0 1 0] =

Answers

The determinant of an elementary matrix of this form is always equal to 1. Therefore, the determinant of this matrix is 1.

A single elementary row operation on the identity matrix yields a square matrix known as an elementary matrix. Simple row operations include adding a multiple of one row to another row and multiplying a row by a non-zero scalar. The resulting matrix is still invertible, and the opposite elementary row operation can be used to create the inverse of the identity matrix. In linear algebra, elementary matrices are used to describe and work with systems of linear equations. They also offer a practical method for computing determinants and resolving matrix equations. Additionally, they are used in encryption and computer graphics.

Learn more about elementary matrix here:
https://brainly.com/question/31775741


#SPJ11

Other Questions
when a process requests pages, linux loads them into memory. when the kernel needs the memory space, the pages are released using a most recently used (mru) algorithm. How many triangles can you construct with side lengths 5 inches, 8 inches, and 20 inches change the active sentences to passive Which of these new product characteristics is LEAST likely to increase the adoption rate:a. product that can be demonstrated to outperform current products.b. product that costs less than presently used products.c. product that requires new patterns of use compared to existing products.d. product that can be tried or sampled in small quantities. A 0.050kg projectile is launched with a horizontal velocity of 647 m/s from a 4.65kg launcher moving at 2.0 m/s. what is the velocity of the launcher after the projectile is launched? DUE TODAY NEED HELP WELL WRITTEN ANSWERS ONLY!!!!!!!!!!!! What is the pH of a buffer solution containing equal volumes of 0.11 M NaCH COO and 0.090 M. CH COOH? PQ-21. K, (CH,COOH) - 1.8x10 (A) 2.42 (B) 4.83 (C) 11.58 (D) 13.91 Two radio stations have the same power output from their antennas one broadcasts AM at frequency of 1000kHz and one broadcasts FM at frequency of 100 MHz. Which is true? A. FM emits more photons per second. B. AM emits more photons per second. C. They both emit the same. Find the sum-of-products expansions of the the following Boolean functions:a) F(x,y,z)=x+y+zb) F(x,y,z)=(x+z)yc) F(x,y,z)=xd) F(x,y,z)=xy^ what volume of 0.200 m k2c2o4 is required to react completely with 30.0 ml of 0.100 m fe(no3)3? 2fe(no3)3 3k2c2o4fe2(c2o4)3 6kno3 Construct a 99% confidence interval for the mean difference of the before minus after weights the vertical movement of a camera mounted on a gyroscopic head of a stationary tripod is a ________. a. handheld shot b. tilt shot c. dolly shot d. pan shot e. zoom shot amandas "discreet inquiries" produce information. in dramatic terms, this is called exposition. but why is this scene dramatically satisfying and suspenseful even though it lacks action? you have been appointed as a chief advisor for the midas project. as far as costs of restoration and reclamation of mining sites, you should strongly recommend that ________. relational information may be more critical to perception that n the features themselvesT/F The following table gives the millions of metric tons of carbon dioxide (CO2) emissions from biomass energy combustion in a certain country for selected years from 2010 and projected to 2032.YearCO2emissionsYearCO2emissions2010339.52022556.22012362.52024593.92014395.12026628.72016421.82028664.12018454.12030704.12020498.42032742.7(b) Find an exponential function that models the data. (Round all numerical values to three decimal places.)y = Around which line would the following cross-section need to be revolved to create a sphere? circle on a coordinate plane with center at 0 comma 0 and a radius of 2 y-axis y = 1 x = 2 x = 1. Suppose you are the only owner of a chain of coffee shops near universities. Your current cafes are doing well, but you are interested in starting a fine-dining restaurant. You decide to use the cash generated from your existing business to enter into a new business. Your accountant provides you with the following data on your current financial performance:Your existing business generates $75,000 in EBIT.The corporate tax rate applicable to your business is 35%.The depreciation expense reported in the financial statements is $14,286.You don't need to spend any money for new equipment in your existing cafes; however, you do need $11,250 of additional cash.You also need to purchase $6,000 in additional supplies--such as cloth tablecloths and napkins, and more formal tableware--on credit.It is also estimated that your accruals, including taxes and wages payable, will increase by $3,750.Based on your evaluation, you have _____ in free cash flow.Calculate the total free cash flow Show all work. during the cretaceous period there was globally very high sea level at a time of overall warm climates. what is the mechanism for creating this high sea level? PLLSSSS HELPUrbanization Cause:Urbanization Affect: