In Universe L, recently discovered by an intrepid team of chemists who also happen to have studied interdimensional travel, quantum mechanics works just as it does in our universe, except that there are three d orbitals instead of the usual number we observe here. Use these facts to write the ground-state electron configurations of the second and third elements in the first transition series in Universe.

Answers

Answer 1

Answer:

Second element(Titanium); [Ar] 3d2 4s2

Third element(Vanadium):Ar 3d3 4s2

Explanation:

Given that there are only three d orbitals in universe L instead of five, the electronic configuration of the second and third elements in the first transition series will now look thus;

Second element(Titanium); [Ar] 3d2 4s2

Third transition element(Vanadium):Ar 3d3 4s2

Hence, the electronic configuration of Titanium and Vanadium in universe L is just the same as what it is on earth.


Related Questions

blank is the total disappearance of all members of a species.

Answers

Answer:

Extinction

Explanation:

When a species becomes extinct, every last specimen has died out

One electron(s) are added to an phosphorus atom. Enter the chemical symbol of the element.

Answers

Answer:

S (sulphur)

Explanation:

In a neutral atom, the number of electrons and the number of protons in an element are equal. These numbers are called the ATOMIC NUMBER. That is, in a neutral atom;

proton no. = electron no. = Atomic no.

Hence, in this case where phosphorus atom has an electron number of 15. It means that there are 15 protons and 15 electrons in a phosphorus atom. If one electron is added to these electrons i.e. 15 +1, there will be 16 electrons in the atom, hence, this atom becomes SULPHUR element, which has 16 electrons in its atom, with chemical symbol S.

25.
Chemical equations should be balanced so that they demonstrate the Law of Conservation of Mass. Which statement about balanced chemical equations is correct?
A
The products must contain the same number and types of atoms as the reactants.
B. The products must contain the same arrangement of atoms as found in the reactants,
C. The products must contain the same number but not the same types of atoms as the reactants.
D. The products must contain the same types but not the same numbers of atoms as the reactants,

Answers

Answer:

a

Explanation:

they have to have the same numbers on each side.

According to the law of conservation of mass, the total mass in the product side is equal to the mass in the reactant side of a reaction. Thus, option A that is The products must contain the same number and same types of atoms as the reactants is correct.

What is mass conservation?

Mass conservation is similar to law of energy conservation. That is mass can neither be created nor be destroyed. Thus The total mass in a system is conserved. Therefore,in reaction the mass of product have to be  equal to the mass of reactant.

A balanced reaction represent all reactants in their state and in perfect stoichiometry. Hence, each elements have to be equal in number on both side. No new atoms is created here and no atom is lost.Same number and same type will be in both side.

During a chemical reaction, the regrouping of atoms occurs to form the new product. Hence, no new atoms are added . Therefore The products must contain the same number and same types of atoms as the reactants and satisfies the mass conservation.

To find more on mass conservation, refer the link below:

https://brainly.com/question/13383562

#SPJ6

assume you mix 0.71g of chlorine with 1.00g of fluorine in a 258 ml flask at 23 . what is the partial pressure of each gas

Answers

Answer:

See explanation

Explanation:

Number of moles of Cl2 = 0.71g/71g/mol = 0.01 moles

Number of moles = 1.0 g/38g/mol = 0.02 moles

Total = 0.01 + 0.02 = 0.03 moles

From the ideal gas equation;

PV=nRT

P=?

V= 258 ml

n= 0.03 moles

T= 296 K

P= nRT/ V

P= 0.03 × 0.082 × 296/258

P= 0.003 atm

Partial pressure Cl2 = 0.01/0.03 × 0.003 atm = 0.001 atm

Partial pressure = F2 = 0.02/0.03 × 0.003atm = 0.002 atm

What is the name for a particle that has a mass about 1/1835 of a proton, but with a negative charge

Answers

Answer:

Electron

Explanation:

A-potassium
B-lead
C-iron
D-magnesium
E-zinc

Answers

The unknown substance : Lead

Further explanation

Given

Density of element

mass of unknown substance = 40 g

volume = 3.5 cm³

Required

The density of unknown substance

Solution

Density is the ratio of mass per unit volume  

The unit of density can be expressed in g/cm³ or kg/m³  

Density formula:  

[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]

Input the value to find the density of an unknown substance :

ρ = 40 g : 3.5 cm³

ρ = 11.43 g/cm³

If we look at the table, the substance which has a density of 11.43 is Lead

pls help asap!!
The surface of earth has many impact craters that have been filled in with sediment. these craters were created by

A. moles
B. dinosaurs
C. people
D. meteorites

Answers

Answer:

D

Explanation:

Craters produced by the collision of a meteorite with the Earth (or another planet or moon) are called impact craters. The high-speed impact of a large meteorite compresses, or forces downward, a wide area of rock. The pressure pulverizes the rock.

A student fails to insert the cuvette into the colorimeter or spectrophotometer correctly. What effect will this have on the measured absorbance

Answers

Answer:

It would cause scattering of light and absorbance measurement is going to be reported as too large

Explanation:

The curvette was not inserted correctly into the spectrometer. The effect that this would have on measured absorbance is that it would cause scattering of light.

Failing to line the curvette correctly would cause light to scatter, the light reaching the photodetector would be less. This less light would then be interpreted as more light being absorbed. This would end up making the absorbance value to be read as too large.

Rank the following compounds in order of decreasing boiling point: potassium fluoride (KF), acetylene (C2H2), and formaldehyde (CH2O)

Answers

Answer: [tex]KF[/tex] > [tex]CH_2O[/tex] > [tex]C_2H_2[/tex]

Explanation:

The order of boiling point depends upon the type of interactions present between the molecules.

Potassium fluoride (KF) is an ionic compound and the opposite ions are held together by strong electrostatic forces.

[tex]C_2H_2[/tex] is a covalent compound and the molecules are held together by weak van der Waals' forces.

Formaldehyde is a polar compound due to presence of polar carbonyl group. Hence dipole-dipole force is present between formaldehyde molecules.

Thus the decreasing order of boiling point is:

[tex]KF[/tex] > [tex]CH_2O[/tex] > [tex]C_2H_2[/tex]

The diagram shows salt dissolved in water. What does it show about water molecules
and chloride ions?
+
Chloride
Oxygen
Hydrogen 4
Sodium

Answers

Answer:

that they all dissolved went on watef

Using standard heats of formation, calculate the standard enthalpy change for the following reaction. 2NH3(g) 3N2O(g)4N2(g) 3H2O(g) ANSWER: kJ Submit Answer

Answers

Answer: [tex]\Delta H^{0} = -879.15 kJ/mol[/tex]

Explanation: Heats of formation is the amount of heat necessary to create 1 mol of a compound from its molecular constituents. The basic conditions the substance is formed is at standard conditions: 1 atm and 25°C. Each compound has its own heat of formation per mol of compound (kJ/mol), but to an element is assigned a value of zero.

Standard Enthalpy Change is defined as the heat absorbed or released when a reaction takes place. It can be positive or negative, which means reaction is endothermic or exothermic, respectively.

Enthalpy change is calculated as the difference between the sum of heat formation of products and the sum of heat formation of the reactants:

[tex]\Delta H^{0}=\Sigma H^{0}_{f}_{(products)}-\Sigma H^{0}_{f}_{(reactants)}[/tex]

For the reaction

   2NH₃   +      3N₂O   →      4N₂    +     3H₂O

2(-46.2)   +     3(82.05)      4(0)    +    3(-241.8)

[tex]\Delta H^{0}=3(-241.8)-[ 2(-46.2)+3(82.05)][/tex]

[tex]\Delta H^{0}=-725.4-153.75[/tex]

[tex]\Delta H^{0}=-879.15[/tex]

The standard enthalpy change for the reaction is [tex]\Delta H^{0}=-879.15[/tex] kJ

What is the relationship between the period number and the number of valence electrons?

Answers

Answer: Across each row, or period, of the periodic table, the number of valence electrons in groups 1–2 and 13–18 increases by one from one element to the next. Within each column, or group, of the table, all the elements have the same number of valence electrons.

Relationship between the period number and the number of valence electrons:

There are total 7 period in a periodic table.Valence electrons can be also determined as electrons in the outermost shell.The number of valence electrons in an atom is reflected by its position in the periodic table of the elements.Across each row, or period, of the periodic table, the number of valence electrons in groups 1-2 and 13-18 increases by one from one element to the next.For example: Group 17 has 7 valence electrons which is one less to the next group number i.e. 18.Within each column, or group, of the table, all the elements have the same number of valence electrons.

Learn more:

brainly.com/question/371590

Arrange the following substances from the lowest to highest normal boiling point: CaO, O2, H2, H2CO, H2O.

Answers

Answer:

The answer is CH4<CH3OCH3<CH4O<CaCO3

Explanation:

The order of the lowest to highest normal boiling point:

H₂ < O₂ < H₂CO₃ < H₂O < CaO

What is the boiling point?

The boiling point is the temperature at which the vapor pressure of the liquid becomes equal to the atmospheric pressure.  At this temperature, the liquid phase is changed into a vapor phase.

The boiling point is the temperature point at which the material transforms into the gas phase in the liquid phase. The Celsius scale was created on the basis of the ice or water melting point and the liquid water or vapor boiling point. Each substance consists its own boiling point.

The boiling point of Calcium oxide is 2850° C as it has a strong force of attraction between the ions. The boiling point of water as we already know is equal to 100° C.

The boiling point of the oxygen gas is -183°C and the boiling point of the hydrogen gas is  - 252.8°C.  The boiling point of carbonic acid is 333.6°C.

Therefore, CaO has the highest, and hydrogen gas has the lowest normal boiling point among the given compounds.

Learn more about Boiling point, here
https://brainly.com/question/2153588

#SPJ6

The process by which cells divide is called
A
O replication
B.
mitosis
C.
respiration
D.
photosynthesis

Answers

the answer is mitosis

Deforestation, intensive agriculture, and drought can result in a condition called
A) urban sprawl
B) land reclamation
C) pollution
D) desertification

Answers

Answer:

D

Explanation:

Human activities that contribute to desertification include the expansion and intensive use of agricultural lands, poor irrigation practices, deforestation, and overgrazing. ... Some meteorologists and soil scientists measure the impacts and length of a drought to determine if it is an example of desertification.

D I hope you get a good grade ☺️

HURRY
Fill in the blank -
metals like to _ electrons to form ionic bonds

Answers

They lose electrons to form ionic bonds

an orbital is a region in an atom where there is a high probability of finding _________

A) an alpha particle
B) a neutron
C) an electron
D) a positron

Answers

Answer:

its electron

Explanation:

i dont have an explanation but i hope you get it right

Which best explains why male whitetail deer grow antlers but females seldom grow antlers?

Answers

Answer: I'm not sure if you have a selection of choice but I think it's A. Female deer have no need for antlers.

Explanation: I mean they don't.. Even if the Male are older that doesn't stop a female deer from growing antlers.. Just flimsy one's I guess.

In an ecosystem, as the growth of antlers is controlled by genes male  male whitetail deer grow antlers but females seldom grow antlers.

What is an ecosystem?

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/1673533

#SPJ6

When an endothermic chemical reaction (the system) occurs inside a calorimeter containing water (the surroundings) and no heat escapes from the calorimeter, which of the following statements is true?

a. Heat flows from the system to the surroundings and the temperature of the water increases.
b. Heat flows from the surroundings to the system and the temperature of the water decreases.
c. Heat flows from the system to the surroundings and the temperature of the water decreases.
d. Heat flows from the surroundings to the system and the temperature of the water increases.

Answers

Answer:

b. Heat flows from the surroundings to the system and the temperature of the water decreases.

Explanation:

The laws of thermodynamics lets us know that energy is neither created nor destroyed but can be converted from one form to another. Also, energy transfer does accompany chemical reactions in the form of heat.

For an endothermic reaction, heat is absorbed by the system from the surroundings. This leads to a drop in the temperature of the surroundings as energy is removed.

This implies that the water temperature decreases.

How do you think the periodic table helps us better understand our world?

Answers

Answer:

The periodic table helps organize all the elements found in the world and tells a great deal of information on each of the elements such as their atomic mass, symbol, atomic number, and more. It even is organized into groups (columns) and periods (rows). The elements in the same group mostly have similar chemical properties. In short, the periodic table is a list of the elements that make up the world around you.

Explanation:

How many moles are in 1.5 x 10^23 atoms of fluorine?

Answers

Answer: 0.125 moles F2

Explanation: 1.5x1023 atoms of F = 0.75x10^23 molecules F2

moles F2 = 0.75x10^23/avogadro number = 0.125 moles

There are 0.25 moles in 1.5 x [tex]10^{23}[/tex]  atoms of fluorine.

Given,

How many moles are in one atom?

In one mole we have,

6.02 x [tex]10^{23}[/tex] atoms.

1 mole = 6.02 x [tex]10^{23}[/tex] atoms

Find the number of moles in 1.5 x [tex]10^{23}[/tex] atoms of fluorine.

We have,

1 mole = 6.02 x [tex]10^{23}[/tex] atoms

Multiply  1.5 x [tex]10^{23}[/tex] / 6.02 x [tex]10^{23}[/tex] on both sides

1.5 x [tex]10^{23}[/tex] / 6.02 x [tex]10^{23}[/tex] x 1 mole = 1.5 x [tex]10^{23}[/tex] / 6.02 x [tex]10^{23}[/tex] x 6.02 x [tex]10^{23}[/tex] atoms

1.5/6.02 mole = 1.5 x [tex]10^{23}[/tex]  atoms

0.25 moles = 1.5 x [tex]10^{23}[/tex]  atoms.

Thus there are 0.25 moles in 1.5 x [tex]10^{23}[/tex]  atoms of fluorine.

Learn more about finding the number of moles in 25.0g of ammonium here:

https://brainly.com/question/21732146

#SPJ2

Which of the following is a true statement about wind erosion?

Most wind erosion happens in the Arctic.
Most wind erosion happens in deserts, beaches, and plowed fields.
Most wind erosion happens only on top of mountains.
Most wind erosion happens in areas with tropical climate.

Answers

Most wind erosion happens in desserts, beaches, and plowed fields.

Answer :

B. Most wind erosion happens in deserts, beaches, and plowed fields.

CHEMISTRY HELP!! due in 10 minutes! :(

Answers

Answer:

Yes, because it match the octet rule!!

It is double bond lewis structure of ch2s!!

Explanation:

3 H2 (g) + N2 (g) 2 NH3 (g)
1.36 liters of hydrogen gas will produce how many grams of NH3 at STP?

Answers

Answer:

Mass = 0.697 g

Explanation:

Given data:

Volume of hydrogen = 1.36 L

Mass of ammonia produced = ?

Temperature = standard = 273.15 K

Pressure = standard = 1 atm

Solution:

Chemical equation:

3H₂ + N₂       →      2NH₃

First of all we will calculate the number of moles of hydrogen:

PV  = nRT

R = general gas constant = 0.0821 atm.L/mol.K

1atm ×1.36 L = n × 0.0821 atm.L/mol.K × 273.15 K

1.36 atm.L = n × 22.43 atm.L/mol

n = 1.36 atm.L / 22.43 atm.L/mol

n = 0.061 mol

Now we will compare the moles of hydrogen and ammonia:

                 H₂         :          NH₃

                  3          :            2

                0.061     :         2/3×0.061 = 0.041

Mass of ammonia:

Mass = number of moles × molar mass

Mass = 0.041 mol × 17 g/mol

Mass = 0.697 g

A certain liquid X has a normal boiling point of 133.60°C and a boiling point elevation constant Kb= 2.46°C kg mol^-1.Calculate the bolling point of a solution made of 52.2g of benzamide (C7H7NO) dissolved in 350. g of X.

Answers

Answer:

136.63 °C

Explanation:

ΔTb=Tb solution - Tb pure

Where; Tb pure = 133.60°C

molar mass of solute = 121.14 g/mol

number of moles of solute; 52.2g/121.14 g/mol = 0.431 moles

molality = 0.431 moles/350 * 10^-3 = 1.23 molal

Then;

ΔTb = Kb * m * i

Kb = 2.46°C kg mol^-1

m = 1.23 molal

i = 1

ΔTb = 2.46 * 1.23 * 1

ΔTb = 3.03 °C

Hence;

Tb solution = ΔTb + Tb pure

Tb solution = 3.03 °C + 133.60°C

Tb solution = 136.63 °C

what does the suffix -ine mean in the word heroine?

example :
the silent movie heroine faced danger from an evil villain.

a. female
b. many
c. young
d. great

Answers

Answer:

Female

Explanation:

Answer: A. Female.

Explanation: The word 'heroine' means a female or a woman that is admired and looked upon for her courage, bravery, and noble qualities.

Chemical bonds between atoms in molecules such as H2, CH4, NH3, and
many large biological molecules are:
lonic Bonds
Hydrogen Bonds
Covalent Bonds
Metallic Bonds

Answers

Answer:In ionic compounds, electrons are transferred between atoms of different elements to form ions. But this is not the only way that compounds can be formed. Atoms can also make chemical bonds by sharing electrons equally between each other. Such bonds are called covalent bonds. Covalent bonds are formed between two atoms when both have similar tendencies to attract electrons to themselves (i.e., when both atoms have identical or fairly similar ionization energies and electron affinities). For example, two hydrogen atoms bond covalently to form an H2 molecule; each hydrogen atom in the H2 molecule has two electrons stabilizing it, giving each atom the same number of valence electrons as the noble gas He.

Compounds that contain covalent bonds exhibit different physical properties than ionic compounds. Because the attraction between molecules, which are electrically neutral, is weaker than that between electrically charged ions, covalent compounds generally have much lower melting and boiling points than ionic compounds. In fact, many covalent compounds are liquids or gases at room temperature, and, in their solid states, they are typically much softer than ionic solids. Furthermore, whereas ionic compounds are good conductors of electricity when dissolved in water, most covalent compounds are insoluble in water; since they are electrically neutral, they are poor conductors of electricity in any state.

A friend is calculating the energy of reaction for a combustion reaction using bond energies, and the calculations are returning a positive for ?H. What, if anything, has your friend done incorrectly?

A. He or She used the wrong table of bond energies
B. Nothing, a combustion reaction should have a positive ?H
C. He or she may have subtracted the reactants from the products
D. Bond energies don’t apply to combustion reactants and should not be used.

Answers

Answer:

He or She used the wrong table of bond energies

Explanation:

We know that we obtain the energy of a reaction also known as the enthalpy of reaction from the formula; ΔHo(reaction) = sum of the bond energies of bonds being broken - sum of the bond energies of the bonds being formed.

Combustion is an exothermic reaction for which the value of ΔH is expected to the negative. If ΔH is not negative, then the calculation was not properly done and the wrong values of bond energy were probably used.

Answer:

He or she may have subtracted the bond energies for the reactants from the products.

Explanation:

It is a hot summer day. Your dog, Spot, is lying in the shade, panting. The water content in the dog's blood gets low. Spot gets up
to find________ because he is responding to the internal stimulus of_______
A)
food; hunger
B)
water; thirst
C)
his bed; sleepiness
D)
shade; high temperatures

Answers

Not sure but B looks right

Suppose 128 radioactive atoms have a half-life of 15 seconds. Approximately how many radioactive atoms will be left after 60 seconds

Answers

Answer:

8 electrons

Explanation:

Number of atoms = 128

Half life = 15 s

After each half life, the number of atoms reduces by half. So we need to determine how many half lives are in 60s.

Number of half lives = 60s / 15s = 4

After the first life;

Number of electrons left = 128 / 2 = 64

After the second life;

Number of electrons left = 64 / 2 = 32

After the third half life;

Number of electrons left = 32 / 2 = 16

After the fourth half life;

Number of electrons left = 16 / 2 = 8

Answer:

C. 8

Explanation:

correct on gizmo; After one half-life (15 seconds), about 64 radioactive atoms will remain, half of the original 128. After a second half-life passes (30 seconds total), about 32 radioactive atoms will remain, half of 64. After a third half-life passes (45 seconds), about 16 radioactive atoms will remain. A time of 60 seconds represents four half-lives, so about 8 radioactive atoms will remain.

Other Questions
Describe two times (in Sailing from Troy and the Lotus Easters) when Odysseus' mendon't listen to him, and what happens to them because they don't listen. (5-6 sentenceswith evidence) Hey!! Please solve all CORRECTLY, I'm counting on you guys (i will also give brainliest and 20 points) What parts of a plant are able to perform photosynthesis? Study the map.Which plate forms a boundary with the African Plate?PacificSouth AmericanNazcaPhilippine What is the equation of the line at passes?What is the slope of the line that produced the following table on your calculator? Which expression is equal to 1/8000 written in scientific notation?A. 8.0 x 10^3B. 1.25 x 10^-4O C. 125 x 10^-5D. 1.25 x 10^4 list 5 ways we can help the ocean and the organisms living in it. 40% of the students in a class like apples for breakfast. If 20 students like apples, how many students are in the class. What is the slope of this line?Enter your answer as a whole number or a fraction in simplest form in the box. How did the U.S. government treat the Sioux? Help plz!!!?!?!?!!!!!!!!!! If a man traveled to a different planet what is warmer 0 f or 0 c What did it mean to be a New Negro in the progressive era? Jared's battery has 4/25 percent of life left. Edward's battery has 3/25 percent of life left. Who has the most battery life left? The ______________ receives the most direct light throughout the year?EquatorNorth PoleSouth PoleTexas What is a theme in "Saving Tobe"?O With great risk may come great reward.O It is important to prepare for the future.By being stubborn, one can change the behavior of others.Sometimes the best action to take is no action at all. High average daily temperature and heavy annual precipitation are found in ao desert.O grassland.O rainforest.O tundra. Select the community facility which allows for participation in extreme sports. (2 points)Bowling AlleyGolf CourseSkate ParkYMCA write an essay using homonyms, homophones or homographs