Answer:
sodium I think .............
Explain the
purpose
of the heat exchanger in the nuclear power plant.
Answer:
yeah someone explain
Explanation:
tttttttttt%ttttttt
Answer:
A heat exchanger is device which is designed to transfer heat from one matter to another. In nuclear power plants, these heat exchangers are used to pass heat from primary system to the secondary system. In the process they produce steam from water, they are also called steam generators or pressurized water reactors.
Answer the following questions:
* How is the chemical formula determined for an ionic compound?
* How are the ionic compounds named using IUPAC nomenclature rules?
Answer:
1. The chemical formula is determined by first finding the positive charge, which is cation, and then finding the negative charge, which is the anion. The cation is writing first, than the anion.
2.An ionic compound is named first by its cation and then by its anion.
Explanation:
Just did it.
What is the name for the compound S3N2
Answer:
Sulfur Nitride
Which is the best example of the law of conservation of energy?
A basketball stops bouncing because its energy disappears.
A rolling skateboard slows down because some of its kinetic energy changes to heat.
A falling book hits the ground and all of its energy is destroyed.
A toy car gains speed as it moves down a ramp because the ramp creates energy.
Answer:
The answer is B. A rolling skateboard slows down because some of its kinetic energy changes to heat.
Explanation:
The law of conservation says energy cant be created or destroyed .Which basically eliminates all of them except b. It can only be transferred
Answer:
b
Explanation:
Tides are caused when earthquakes occur under the ocean TRUE OR FALSE
Answer:
False
Explanation:
tides are caused due to the gravitation of moon, they occurred 2 times a day, or takes 6 hours 13 minutes for a ride
how are sex cells different from body cells
Answer:
Sex cells are different in body cells because the sex cells are eggs while body cells are formed.
At which point does a chemical reaction reach dynamic equilibrium?
A. When no further reaction occurs in either direction of the reaction
B. When the concentrations of reactants and products are different
O C. When reactants are decreasing rapidly and products are
increasing slowly
D. When the concentrations of reactants and products stay the same
Answer:
D. When the concentrations of reactants and products stay the same
Explanation:
[tex]\bigstar[/tex] Dynamic equilibrium is when rate of forward reaction is equal to the
rate of backward reaction. The concentration of Product and Reactant
are both same, no net change. Hence Option D is correct.
When the concentrations of reactants and products stay the same at this point a chemical reaction reach dynamic equilibrium.
Hence, Option (D) is correct answer.
What is a Chemical Reaction ?A chemical reaction is a process in which chemical bonds between atoms to break and reorganize, to form other new substances.
What is Dynamic Equilibrium ?Dynamic equilibrium occurs in reversible reactions when the number of particles becomes product is equal to number of particles becomes reactant. Chemical equilibrium is dynamic in nature.
Thus from the above conclusion we can say that When the concentrations of reactants and products stay the same at this point a chemical reaction reach dynamic equilibrium.
Hence, Option (D) is correct answer.
Learn more about the Dynamic Equilibrium here: https://brainly.com/question/1233365
#SPJ2
If we know the half life how could we determine what percentage of radioactive isotopes will be left after 4 half-lives?
Answer:
"After 1 half-life there will be 50% of the original isotope, and 50% of the decay product.
After 2 half-lives there will be 25% of the original isotope, and 75% of the decay product.
After 3 half-lives there will be 12.5% of the original isotope, and 87.5% of the decay product.
After 4 half-lives there will be 6.25% of the original isotope, and 93.75% of the decay product." -Stephen Frantz, Former Director of the Reed College Nuclear Reactor
Explanation:
How many moles are in 35.0g of sodium (Na).
Answer:
2.5 I don't have a explanation
Which of the following is not a correct formula unit for a salt made from main group elements?
Ca0
AIFA
Al2O3
Ca3N2
Answer:
The correct option is AlFA
Explanation:
There is no element in the periodic table with the symbol of A. Thus, the compound AlFA is wrong and cannot be a salt made from main group elements. CaO is calcium oxide, Al₂O₃ is aluminium oxide and Ca₃N₂ is calcium nitride - all are evidently made from elements from the main groups of the periodic table (except the AlFA)
A compound is made up of 30% nitrogen and 70% sulfur. the molar mass of a compound is 92 g/mol. What is the molecular formula of the compound?
Answer:
N2S2
I just took the quiz and it was right
POSSIBLE POINT
Collisions between reactant molecules lead to a reaction when the molecules have the correct orientation and enough kinetic energy
True
False
A) Mention any two properties of an ideal fuel. (b) What is meant by calorific value? (c) 2kg of a fuel produces 48,000 KJ of heat energy and complete combustion. Calculate the calorific value of the fuel.
Answer and explanation:
A) An ideal fuel must:
- easy to transport and storage.
- have a high calorific value.
B) The calorific value for a fuel is the amount of heat - measured in Joules- which is produced during the complete combustion of the fuel. It is expressed in Joules per Kg of fuel (J/kg).
C) From the data:
mass of fuel = 2 kg
heat produced = 48,000 KJ
We calculate the calorific value by dividing the heat produced by the mass of fuel, as follows:
calorific value = heat produced/mass of fuel = (48,000 KJ)/(2 kg)= 24,000 kJ/kg
Since 1 KJ= 1000 J, we can express the calorific value in J/kg as follows:
24,000 kJ/kg x 1000 J/1 kJ = 2.4 x 10⁷ J/kg
Nitrogen and carbon can form ___ bonds in which six electrons ( three pairs ) are shared.
A. Single Covalent
B. Ionic
C. Hexadecimal
D. Triple covalent
What must happen for an igneous rock to form
Answer:
Igneous Rocks: form by crystallizing melted material (magma).
Explanation:
They can form either on the surface (extrusive igneous rocks), or deep in the crust (intrusive or plutonic igneous rocks).
what is an autograph that transfers energy from the sun to make its own food?
Answer:
Photoautotrophs
Explanation:
I think you mean "autotroph"
The answer is photoautotrophs. they use sunlight to make their food
Don't forget to rate the answer for others
Describe how the nervous system helps the boy detect the aroma coming from the pot on the stove.
Answer:
When a boy smells the aroma coming from the pot on the stove is actually detecting the chemicals coming from the air which comes from hot food that dissolves in the mucus present in the nasal cavity that carries tiny hairs made up of the nerve fibers that absorb these chemicals and excite or stimulate the olfactory receptors.
Various types of a distinct aroma or smell lead to a specific combination of the olfactory cells to make a specific smell. These combination patterns transported to the olfactory bulb along axons; a long extended neuron.
The sensory patterns or information encoding the smell of food present in the pot reaches the primary olfactory cortex in the brain, which is present on the anterior surface of the temporal lobe, and decodes accordingly.
Answer:You breath in what you smell and if it smells good or not you usely get up an see what is in the kitchen
Explanation:
Help please I don’t know
Answer:
I don't EXACTLY know but hopefully the description below helps you find the answer!
Ionic bonding is a type of chemical bond in which valence electrons are lost from one atom and gained by another. This exchange results in a more stable, noble gas electronic configuration for both atoms involved. An ionic bond is based on attractive electrostatic forces between two ions of opposite charge.
Explanation:
Use the periodic table to select which type of bond is present and which of the listed properties is most likely for each substance.
A =
B =
Cu3Zn2
O2
Answer:
A :metallic
B :conducts electricity as a solid
C :covalent
D :does not conduct electricity
Explanation:
Answer:
A = ✔ metallic
B = ✔ conducts electricity as a solid
C = ✔ covalent
D = ✔ does not conduct electricity
Explanation:
edge 2023
What is the electric force acting between two charges of 0.0042 C and -0.0050 C that are 0.0030 m apart?
Answer: -2.1 x 10^10 N
Explanation:
How does an atom of one element differ from the atom of another element?
-Are there other ways to change the identity of an atoms? Explain, please.
Explanation:
The atoms of one element differs from the atoms of other elements in terms of the number of protons they contain. This is often taken as the atomic number of such an atom.
The number of proton is the best indicator of the atom one is dealing with. Based on this number, elements are categorized into distinct columns and rows on the periodic table. The atomic number is the number of protons or positively charge particles in the atom.II.
It is possible to change the identity of an atom. This is only possible by altering the atomic number of the atom.
Only nuclear reactions have this capability.
When an atom undergoes nuclear reaction that involves change in number of protons, transmutation occurs and a new atom forms.
saturn surface features
Answer:
Surface pressure: 140 kPa
Surface gravity: 10.44 m/s2 (34.3 ft/s2); 1.065 g
Surface area: : 4.27×1010 km2 (1.65×1010 sq mi
Average orbital speed: 9.68 km/s (6.01 miles/s)
Answer:craters
Explanation:
In an experiment, the one variable that is changed on purpose by the
scientist is called the
1. controlled variable
2. experimental variable
3. independent variable
4. dependent variable
Answer:
3
Explanation:
Independent variable
Can someone help me with this?
Answer:
b
Explanation:
it i b ur welcome
Answer: um sure so 2+4= 24 then 9+7=97
Explanation: bc if you have 2 and you have 4 and if you smash that together you get 24 and 9 and 4 smash that together and you get 94 see so easy
what is the molar mass of iron (III) sulfate
Answer:
399.88 g/mol
Explanation:
Iron(III) sulfate, is the chemical compound with the formula Fe₂(SO₄)₃. Usually yellow, it is a salt and soluble in water. A variety of hydrates are also known. Solutions are used in dyeing as a mordant, and as a coagulant for industrial wastes.
How many grams of C are required to react with 97.1 g of Fe2O3?
Answer:
21.9 g C
Explanation:
Fe₂O₃ + 3 C ⇒ 2 Fe + 3 CO
This is your chemical equation.
To find the grams of C required, first convert grams of Fe₂O₃ to moles using the molar mass (159.69 g/mol).
(97.1 g)/(159.69 g/mol) = 0.608 mol Fe₂O₃
Then, use the mole ratio between Fe₂O₃ and C to convert moles of Fe₂O₃ to moles of C. You can find the mole ratio by looking at the chemical equation.
(0.608 mol Fe₂O₃) × (3 mol Fe₂O₃/1 mol Fe₂O₃) = 1.824 mol C
You can then convert moles of C to grams using the molar mass (12.01 g/mol).
(1.824 mol) × (12.01 g/mol) = 21.9 g
what is the mass in grams of 0.00125 mole of sodium Na=23
Answer:
0.03g
Explanation:
Given parameters:
Number of moles of Na = 0.00125mole
Unknown:
Mass in grams of Na = ?
Solution:
To find the mass of this substance, we simply multiply the number of moles with the given molar mass of Na.
Mass of Na = number of moles x molar mass
Mass of Na = 0.00125 x 23 = 0.03g
Which of the following elements are already balanced in this equation? FeS₂ + Cl₂ → FeCl₃ + S₂ Cl₂
Fe and S are already balanced in this equation
Further explanationBalanced indicates that the number of elements in question has the same number of atoms both on the left side (the number on the reactants side) and on the right side (the number on the product side)
Even though one of the elements is said to be balanced, the chemical equation as a whole cannot be said to be balanced, because the chemical equation has several components of the constituent elements.
To balance chemical equations, a coefficient in front of the compound is usually added either in the reactants or products
Reaction
FeS₂ + Cl₂ → FeCl₃ + S₂Cl₂
From this equation, it can be shown that: the Fe and S elements are balanced because the numbers are equal both on the left and right, while the Cl elements are not yet balanced
Fe, left=1, right=1 ⇒ balanced
S, left=2, right=1 ⇒ balanced
Cl, left=2, right=5⇒ not balanced
For balanced equations:
2FeS₂ + 5Cl₂ → 2FeCl₃ + 2S₂Cl₂
Which is one characteristic of deep ocean currents someone pls help
Answer:
visbility if that is an answer
Explanation:
Answer:
hope it helps...
Explanation:
Thermohaline circulation
Deep ocean currents are driven by density and temperature gradients. This thermohaline circulation is also known as the ocean's conveyor belt.
If my answers helped please comment...
What is the molarity of a solution if 5 moles of solute are dissolved in 8 L of solvent.
Answer:
0.625mol/L
Explanation:
Given parameters:
Number of moles of solute = 5moles
Volume of solvent = 8L
Unknown:
Molarity = ?
Solution:
Molarity is the number of moles of solute per unit volume of solution. It is mathematically expressed as
Molarity = [tex]\frac{number of moles }{Volume}[/tex]
Molarity = [tex]\frac{5}{8}[/tex] = 0.625mol/L