In order for generators to work, mechanical energy must be harvested. (C)
A mirror works on the principle of
and a lens works on the principle of
Explanation: When the ray of light falls on a highly polished and smooth surface, then after striking it bounce back into the same medium, this phenomenon is called reflection. So, mirror works on the principle of reflection
MARK ME AS BRAINLIEST
Explanation:
Answer: The mirror is a device based on the principle of reflection whereas the lens is based on the principle of refraction
The Bohr model of the atom suggest that the protons and neutrons are found in the nucleus and the electrons orbit the nucleus much like planets around the sun. How is our modern model of the atom different from this model? A) Neutrons are not found in the nucleus. B) The nucleus is much larger than first thought. C) The electrons contain smaller parts called quarks. D) The electrons move around the nucleus in an electron cloud
Answer:
I think it is D
Explanation:
the Bohr model says that electrons whizz around the atomic nucleus in the same way that the earth goes around the sun - but rather than being bound by gravity, it is bound by electromagnetic forces.
60m27Co → 6027Co Predict the type of radioactive emission produced from the decay of metastable cobalt-60 to cobalt-60. Describe this type of emission and its reaction to an electric field. A) During the radioactive decay, alpha particles are released. These positive particles are attracted to the negative plate in the electric field and represent a ground energy level. B) Beta particles are released during the radioactive decay. These negative particles are attracted to the positive plate in the electric field and represent an excited energy state. C) Radioactive gamma decay is produced by the reaction. This neutral electromagnetic radiation allows the isotope to return to its ground state and is not attracted to the electric field. D) Both types of radioactive emissions, particles and electromagnetic radiation, are produced during this decay. None of these are attracted to the electric field and both present an intermediate level. Eliminate
wind blows at the speed of 30m/s across a 175m^2 flat roof if a house.
what is the pressure difference between inside the house and the outside of the house just above the roof? (assume the air pressure inside the house is atmospheric pressure)
what is the force on the roof due to pressure difference?
The pressure difference between inside the house and the outside of the house is 540 Pa.
Pressure based problems:Using Bernoulli's equation.
[tex]P1+\frac{1}{2} \rho v1^2 = P2 + \frac{1}{2} \rho v2^2 \\\\P1 + 0 = \delta P = \frac{1}{2} \rho v2^2 \\\\\delta p = \frac{1}{2}(1.2)(30)^2\\\\\delta p = 540 pa[/tex]
Using pressure definition:
ΔP = F / A
F = 9.45 × 10⁴ N
Find out more information about 'Pressure'
https://brainly.com/question/356585?referrer=searchResults
If the temperature of an object is 30° C, which of the following temperatures would indicate the MOST heat that was removed from this object? A. A. 40° C B. B. 30° C C. C. 20° C D. D. 10° C
Answer: 10° C
Explanation:
The heat loss from the body can be defined as the condition in which the heat is moved out from the body and the body cools down.
In this case the heat from the body is lost so that its overall temperature decreases. This states that the temperature of the body should be below 30° C.
If most of the heat from the body having 30° C is removed, the correct option will be 10° C. The heat loss is 20° C in this case.
Hence, the correct answer is option D.
Answer:
The answer is D. I hope this helped you. I just did this same question.
Explanation:
Tigers and goldfish are not related
7. A truck traveling west on the highway experiences an acceleration to the east. What could be the cause of this acceleration?
the truck speeding up as it travels down a hill
the truck veering left or right as it changes lanes
the truck driver pressing on the brakes
the truck driver pressing on the accelerator pedal
Why is energy required to compress a spring?
A) the spring has chemical bonds
B) the spring is at room temperature
C) thé position of the spring is being changed
D) the spring is metal
a. Write 2-3 sentences describing what happens to a uranium nucleus during nuclear
fission. (2 points)
b. Write 2-3 sentences explaining why nuclear fusion cannot be used in power plants, yet
can still be the original source of the electric energy used in homes. (4 points)
c. Write 3 - 4 sentences evaluating the use of nuclear fission to generate electric energy. Provide at least one point in favor of and two points against using fission. (3 points)
Answer:
Through their studies of radioactive elements, they discovered nuclear fission.
The atoms then undergo nuclear fission, producing daughter nuclei and more neutrons.
Critical mass is the minimum mass of fissionable material required to sustain a nuclear fission reaction.
Imagine an energy source that is more powerful than nuclear fission or even nuclear fusion.
The products of uranium mining and nuclear fission remain radioactive for hundreds of thousands of years.
Health officials did not test for Strontium 90, a radioactive carcinogenic byproduct of nuclear fission.
And no one's going to be able to invent all the hydrogen-powered cars and nuclear fission energy we're supposed to have in the future.
The development of nuclear fission weapons and later thermonuclear fusion weapons represented an incomparable revolution in weaponry.
The element can be prepared artificially in particle accelerators and is a byproduct of nuclear fission reactions.
Nuclear fusion reactions are like nuclear fission reactions, therefore, in the respect that some quantity of mass is transformed into energy.
Before World War II, German chemists Otto Hahn and Fritz Strassmann discovered nuclear fission.
Element 109 is named meitnerium, for Lise Meitner, who was the first to realize that uranium undergoes nuclear fission.
The reason is that nuclear fission occurs best with neutrons that move at relatively modest speeds, called thermal neutrons
The simple atom bomb owed its explosive power to the energy released by nuclear fission, or fusion.
An atomic bomb is a weapon of mass destruction which uses nuclear fission to produce vast amounts of energy.
These engines use the heat of nuclear fission to drive steam turbines, which in turn charge the batteries.
Pellets of nuclear fuel are contained within the fuel rods of nuclear fission reactors.
It is likely that nuclear fission, hydroelectricity, wind power and direct solar power will be important sources for future electricity generation.
Their research provided the groundwork for other modern-day solutions that use microwave energy and light to propel ships, rather than nuclear fission.
Why is the public too dumb to understand the Privy Council, too unscientific to understand genetic engineering, but is now an expert on nuclear fission? btw this is for c
Answer:
A.When a large, fissile atomic nucleus such as uranium-235 absorbs a neutron, it may undergo nuclear fission.In the first step, a uranium-235 atom absorbs a neutron, and splits into two new atoms, releasing three new neutrons and a large amount of binding energy.
B. One of the biggest reasons why we haven't been able to harness power from fusion is that its energy requirements are unbelievably, terribly high. In order for fusion to occur, you need a temperature of at least 100,000,000 degrees Celsius. That's slightly more than 6 times the temperature of the Sun's core.
C. You would need less uranium to fuel it and it would generate better electricity, but its energy requirements are too high, and we would not be able to control it
Explanation:
Match the units in the right hand column with the terms in the right hand column
Answer:
a1
b2
d3
c5
d4
Explanation:
Hope this helps
Check if right by the way
Answer:
a1
b2
d3
c5
d4
Explanation:
As the car goes through the valley in part A the car's speed is 15 m/s, its mass is 20 kg and the radius of valley (r) is 5 meters, determine the magnitude of the centripetal force acting on the car. *
Answer:
Centripetal force, F = 900 N
Explanation:
We have,
Speed of a car is 15 m/s
Mass of the car is 20 kg
Radius of the valley is 5 m
It is required to find the magnitude of the centripetal force acting on the car. The centripetal force acting on the car is due to the motion in circular path. The centripetal force is given by :
[tex]F=\dfrac{mv^2}{r}\\\\F=\dfrac{20\times (15)^2}{5}\\\\F=900\ N[/tex]
So, the centripetal force of 900 N is acting on the car.
if plotted the voltage or current produced by an alternator forms a curve called a _____ wave.
A. Pulsed
B. Hertz
C. Sine
D Sawtooth
Answer:
the correct answer in the C wave type sine
Explanation:
In an alternating energy system the wave formed is a sine wave. Therefore it is said that the current or voltage produced is a sine wave toppi but
V =V₀ sin (kx-wt)
therefore the correct answer in the C wave type sine
How much time will it take for a bug to travel 5 meters across the floor if it is
traveling at 1 m/s?
5 m
5 m/s
6 m/s
55
Answer:
It will take 5 seconds
Explanation:
please help me i’ll give you brainliest if correct
Answer:
B
Explanation:
If done incorrectly and not under said guidelines that is.
What is the difference between a mixture and a pure substance? Give an example of each.
Answer:
A pure substance (an element or a compound) is made up of only one type of atom, or molecule.
Examples: water (H2O molecules), oxygen (O2 molecules), argon (Ar atoms).
A mixture is made of up of more than one type of atom or molecule.
Examples: salt water (H2O molecules, Na+ ions, Cl- ions),
air (N2 molecules, O2 molecules, Ar atoms, CO2 molecules)
Note: the composition of a pure substance is fixed, but the composition of a mixture can vary. Two salt water solutions might not have the same concentration of salt. Or, if you prefer, one blueberry muffin might have more blueberries in it than another blueberry muffin.
make me brainlist if u think its helpful
How are living things organized into domains and kingdoms? Check all that apply
Answer:
Organisms are classified into domains and kingdoms based on their cell type, their ability to make food, and the number of cells in their bodies.
Explanation:
there
What does wave speed have to do with all SONAR AND RADAR technologies?
What does the medium have to do with SONAR vs RADAR?
Explanation:
1) Radar uses radio waves, which are a type of electromagnetic energy. Sonar uses the echo principle by sending out sound waves underwater or through the human body to locate objects. Sound waves are a type of acoustic energy. Because of the different type of energy used in radar and sonar, each has its own applications.
2)Radar systems operate using radio waves primarily in air, while sonar systems operate using sound waves primarily in water (Minkoff, 1991). Despite the difference in medium, similarities in the principles of radar and sonar can frequently result in technological convergence.
Answer:
1) Radar uses radio waves, which are a type of electromagnetic energy. Sonar uses the echo principle by sending out sound waves underwater or through the human body to locate objects. Sound waves are a type of acoustic energy. Because of the different type of energy used in radar and sonar, each has its own applications.
2)Radar systems operate using radio waves primarily in air, while sonar systems operate using sound waves primarily in water (Minkoff, 1991). Despite the difference in medium, similarities in the principles of radar and sonar can frequently result in technological convergence.
Read more on Brainly.com - https://brainly.com/question/16593294#readmore
I can help if you want more
Explanation:
Can someone help me write poems about Photosynthesis and Cellular Respiration?
Answer:
chisdiskuij mdhdkbj is a member 7th street fighter in Washington
Which object experiences the greatest gravitational force? A)car B)fire truck C)plane D)human
Answer: C Plane
Explanation: According to Newton's law, gravitational force is proportional to the product of masses and inversely proportional to the square of distance between them.
Gravitational force depends on mass. The bigger the mass, the more the magnitude of the gravitational force. Since plane is assume to have the highest mass in the options, we can therefore conclude that plane will experience the highest gravitational force.
Is a reflection matter?
Answer:
Yes, because everything bounce off in every surface around any object.
Explanation:
Jimmy walks 3 miles east then 1 mile west. What is the distance Jimmy traveled?
Answer:
2 miles
Explanation:
Jimmy walked forward 3 miles east (to the right)
Then, he backtracked and walked 1 mile west (to the left)
This can be written as:
3 - 1 = ?
3 - 1 = 2
Therefore, Jimmy traveled a total of 2 miles.
cynthia sprints 60 meters in 5 seconds during soccer practice. what is her speed. please show your work
Answer:
12 m/s
Explanation:
Speed can be found using the following formula.
[tex]s = \frac{d}{t}[/tex]
where s is speed, d is distance traveled and t is the time.
We know that Cynthia sprinted 60 meters in 5 seconds. Therefore, the distance is 60 meters and the time is 5 seconds.
d=60
t=5
Substitute these values into the formula.
[tex]s=\frac{60}{5}[/tex]
Divide
[tex]s=12[/tex]
Add appropriate units. For this problem, the appropriate units would be meters per second, or m/s.
[tex]s=12 m/s[/tex]
Cynthia's speed is 12 meters per second.
A bus increases its speed from 30km/h to 60km/h in 2hours.Calculate the acceleration of the bus.pls give proper answer
Answer:
15km/hr²
Explanation:
speed =v-u/t (v=final speed,u=initial speed ,t=time taken)
60-30/2
=15km/hr²....
• D= 50 m
• S= 40 m/s
• T= ?
Answer:
1.25s
Explanation:
D = 50m
S = 40 m/s
T = ??
D = S × T
50m = 40 m/s × T
50/40 = T
5/4 = T
1.25s = T
PLEASE HELP !!
On Earth we can easily see Mercury, Venus, and Mars in the night sky. The planets look like they are moving through the stars because the
A) Earth is orbiting the Sun.
B) sky is swirling overhead on Earth.
C) all objects in space orbit around the Earth.
D) planets are moving in their own orbit around the Sun.
Temperature is a measure of
Answer:
degree celsius
Explanation:
it's measured in degree Celsius
How do you describe the frequency of waves perceived by the observer from the moment the source appears to the moment it disappears ?
Answer: the frequency increases and decreases.
Explanation: According to doppler effect, the frequency of waves tends to increase as the source approaches and decrease as the source disappears.
The Doppler effect occurs when a source of waves and/or observer move relative to each other, resulting in the observer measuring a different frequency of the waves than the frequency that the source is emitting.
which organism is a producer
1-oak tree
2-mushroom
3-mountain lion
4-butterfly
Answer:
Answer 1, oak tree
Explanation:
producer organisms are organisms that are mostly photosynthetic organisms like plants, some bacterias and unicellular organisms like euglena.
So the answer is 1 an oak tree because it is photosynthetic.
To see the others mushroom may be a plant like organism but it is not photosynthetic because it doesn't contain chlorophyll.
Mountain lions are not photosynthetic that means they are heterotrophs( organisms that cann't make their own food).
And butterflies are also heterotrophs
As light from a star spreads out and weakens, do gaps form between the photons?
Answer:
There are no gaps in space between the photons as they travel. If you were to look at a wave then you'd come to a conclusion that indeed that there aren't any gaps unless they are specifically placed.The light from a distance star indeed spreads out and weakens as it travels, but this just reduces the wave strength and does not introduce gaps.
What are the three basic parts of a circuit?
Answer: energy source, path, and load
Explanation:
Answer:
1) The wires
2) A component e.g. light
3) A power source
Explanation:
A power source is a basic part of a circuit because if the circuit doesn't have a power source, how will the electrons flow around? . A component is a basic part of a circuit because what's the point of having a circuit without something happening for example a light flashing or a motor turning. Finally, the wires are important because they carry the electrical charge for the component to turn on so if there is no wires there is no electrical flow being carried along