Answer:
A film transition is a technique used in the post-production process of film editing and video editing by which scenes or shots are combined. Most commonly this is through a normal cut to the next shot. Most films will also include selective use of other transitions, usually to convey a tone or mood, suggest the passage of time, or separate parts of the story. These other transitions may include dissolves, L cuts, fades (usually to black), match cuts, and wipes.
Explanation:
Two forces are applied to a 50-kg box. One is 60.0
N to the south and the other is 80.0 N to the east.
These are the only forces acting on the box. The
magnitude of the acceleration of the box is:
1. 20m/s^2
2. 1.5 m/s^2
3. 5.2 m/s^2
4. 0.50m/s^2
5. 10m/s^2
The magnitude of the acceleration of the box is 2 m/s².
The given parameters;
mass of the box, m = 50 kgfirst force, F₁ = 60 N southsecond force, F₂ = 80 eastThe resultant of the two given forces is calculated as follows;
[tex]F= \sqrt{F_1 ^2 + F_2 ^2} \\\\F = \sqrt{60^2 + 80^2} \\\\F = 100 \ N[/tex]
The magnitude of the acceleration of the box is calculated as follows;
[tex]F = ma\\\\a = \frac{F}{m} \\\\a = \frac{100}{50} \\\\a = 2 \ m/s^2[/tex]
Thus, the magnitude of the acceleration of the box is 2 m/s².
Learn more about acceleration here:
https://brainly.com/question/17067013
The wavelength is 1. 87 x 10-7 m. What is the frequency?.
Answer:
11.7 im pretty sure. i did the work so it should be correct
5 a
What causes the pressure of air at the Earth's surface?
Answer:
Atmospheric pressure is caused by the gravitational attraction of the planet on the atmospheric gases above the surface and is a function of the mass of the planet, the radius of the surface, and the amount and composition of the gases and their vertical distribution in the atmosphere
Explanation:
Fill out the material order form with the Quantity (number of each item) and total cost for
that item (Cost Quantity). Add the totals to ensure you do not exceed $100.
YOU HAVE $100 TO SPEND. NO BONUS POINTS FOR SAVING S.
Use the materials carefully, as they will not be replaced if you damage
them.
Material
Cost ($) Quantity
Cost x Quantity
Straw
2
Paperclip (large)
2.
String (12")
3
Tooth pick
3
Cup
5
Rubber band
5
7
Tape (0.5 m)
7
Paper (8.5" x 11")
Tissue Paper
10
Duct Tape
(.25m)
).
10
Cotton ball
12
Balloon
15
Paper plate
15
Total Cost =
Answer:
Explanation:
Material: Cost ($): Quantity: Cost x Quantity:
Straw 2$ 2x 2$ x 2
Paperclip 2$ 2x 2$ x 2
String 3$ 1x 3$ x 1
Toothpick 3$ 1x 3$ x 1
Cup 5$ 1x 5$ x 1
Rubber band 5$ 1x 5$ x 1
Tape 7$ 1x 7$ x 1
Paper 7$ 1x 7$ x 1
Tissue Paper 10$ 1x 10$ x 1
Duct Tape 10$ 1x 10$ x 1
Cotton ball 12$ 1x 12$ x 1
Balloon 15$ 1x 15$ x 1
Paper Plate 15$ 1x 15$ x 1
total: 100$
hope this really helped!!
mark me brainliest :D
Which feature of a balanced chemical equation demonstrates the law of
conservation of mass?
O A. It shows the products of a chemical reaction to the right of the
reaction arrow.
B. It has coefficients to show how much of each substance a
chemical reaction uses.
C. It has the same types of atoms on both sides of the reaction
arrow.
D. It shows the reactants of a chemical reaction to the left of the
reaction arrow.
Answer:
C
Explanation:
don't worry Tama yan base sa pagkakaintindi ko
Na + KCL -> K + NaCI reaction type
Explanation:
it is a displacement reaction.
If the circumference of a space shuttle's orbit around Earth is 42,522 km and the space shuttle orbits around it 1.4 times
every hour, what is the speed of the space shuttle in km/hour? In meters/second?
Answer:
105,000km or about 65,244mi
Explanation:
If the space shuttle orbits around it 1.4 times every hour then the speed of the space shuttle in km/hour would be 595330.8 Km/hour, and its speed in meters would be 165369.67 m/s.
What is speed?The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object.
Average speed = total distance /Total time
As given in the problem If the circumference of a space shuttle's orbit around Earth is 42,522 km and the space shuttle orbits around it 1.4 times every hour, then we have to find the speed of the space shuttle in km/hour
The total distance covered by the space shuttle in an hour = 42,522×1.4
= 595330.8 Km
The speed of the space shuttle in meters/second = 595330.8 × 1000/3600
= 165369.67 m/s
Thus, the speed of the space shuttle would be 595330.8 Km/hour, and its speed in meters would be 165369.67 m/s.
To learn more about speed here, refer to the link;
brainly.com/question/7359669
#SPJ5
which type of telescope is best used to detect quasars?
Answer:Gamma-Ray Telescopes
Explanation:
Gamma-Ray Telescopes are used for detecting the gamma-ray part of the Electromagnetic Spectrum. These can detect very high-energy gamma-rays from radio galaxies, gamma-ray bursts from stars, supernovae events, and Quasars.
Radio Waves Telescope
What are the definitions of initial horizontal velocity and initial vertical velocity? NO LINKS! STOP SCAMMING ME CARTOKUN AND CARTERMANATOR!
Give an example of when a conscientious objector might exercise their right:
Tiny mass of 67kg and tubby mass of 83 kg are now on the opposite ends of a see saw and are both 1.4m from the balance point where should their sister teeny whose mass is 32 kg sit so the see saw balances
Answer:
0.7 m between the balance point and Tiny
Explanation:
It's intuitive to say she sould be on the side the smaller mass is placed. How far from the balance point?
Let's call x that distance. and assume that the contraption is "oriented" so that being on the side with tiny (and teeny) gives you a positive distance from the balance point, and negative on the other side.
At equilibrium, the sum of all momentums (momenta?) will be zero:
[tex]67\times 1.4 +32\times x + 83 \times (-1.4) = 0\\32x -16(1.4) = 0 \rightarrow 2x=1.4 x= 0.7[/tex]
In layman's term, she has to be halfway between the balance point and Tiny.
How to convert acceleration to velocity.
You can't. Velocity and acceleration measure two different things, so their units are incompatible. It's like asking, "How many meters does this book weigh?"
Maybe you mean "find" acceleration using given velocities, or a velocity function?
How much force is required to move a rock 75m, when using 340J of work?
Answer:
Solution given:
work done=340J
displacement(d)=75m
force[f]=?
we have
work done =Force*displacement
340=Force*75
Force=340/75
Force=4.5N
Given,
Work done = 340 J
Distance = 75 m
Force = work done / distance
Force = 340 / 75
Force = 4.533 Newton (N)
______
RainbowSalt2222
Name any three things that cause soil pollution
Answer:
garbage , polluted water dam, unexpected dust particle
what are the characteristics of a " team " in hit in volleyball ?
Answer:
A team may contact the ball a total of three (3) times before it is sent over the net.
A container on the highway with a round hemispherical end is considered a(n) _________ pressure container.
Answer:
high pressure container
A container on the highway with a round hemispherical end is considered a(n) High-pressure container.
What is pressure ?Pressure (symbol: p or P) stands the force involved perpendicular to the surface of an object per unit area over which that force exists distributed. 445 Gauge pressure (even spelled Gage pressure) exists the pressure comparable to the ambient pressure.
Various units exist utilized to represent pressure. Some of these derive from a unit of force separated by a unit of area; the SI unit of pressure, the pascal (Pa), Pressure may also be represented in terms of standard atmospheric pressure; the atmosphere (atm) stands equivalent to this pressure, and the tore exists described as 1⁄760 of this.
Hence, A container on the highway with a round hemispherical end is considered a(n) High-pressure container.
Learn more about High-pressure container refer to;
https://brainly.com/question/9451586
#SPJ2
Prove that the two equations shown below are equivalent.
F = ma and F = p/t
Newton’s Second Law of Motion is defined as Force is equal to the rate of change of momentum. For a constant mass, force equals mass times acceleration.
[tex]\Delta p = mv - mu \\\\\implies \Delta p = m(v-u) \\\\F = \dfrac{\Delta p}{\Delta t} = \dfrac{m(v-u)}{\Delta t} = ma[/tex]
F = ma is the formula of Newton’s Second Law of Motion.
To prove Newton's second law of motion,
Given Force F = Δp/Δt
What is relation between F = ma and F = Δp/Δt?Newton’s Second Law of Motion is defined as Force is equal to the rate of change of momentum. The second law of Newton can be described as the acceleration of an object which produces a net force is directly proportional to the magnitude of the net force, in the same path i.e., direction as the net force, and inversely proportional to the mass of the object.As the acceleration has its magnitude and direction it is a vector quantity.Proof for F=ma
Let us consider an object of mass m, moving along a straight line with an initial velocity u, final velocity v and it has some particular time t and thus Momentum can be related as,
For initial velocity u, p1 = m × u
The final velocity v, p2 = m × v
The change in momentum can be expressed as
p2 – p1 = (m × v) – (m × u)
p2 – p1 = m (v – u)
Here, we know that the rate of change of momentum with respect to time is proportional to the applied force.
The applied force F,
F ∝ [m (v – u)]/t
F ∝ m × a
As acceleration (a) is the rate of change of velocity with respect to time.
F = k × m × a
F = ma
where k can be the constant.
Learn more about Newton's second law,
https://brainly.com/question/13447525
#SPJ2
How do motors use energy? Do they convert electrical energy into mechanical energy OR mechanical energy into electrical energy?
Plz help asap!
Answer:
Motors convert electrical energy into mechanical energy
Explanation:
A motor uses electrical energy to create mechanical energy by creating magnetic fields causing the motor to spin. A generator is the opposite and converts mechanical into electrical by spinning a motor in a magnetic field.
An electric motor can transforms electrical energy into mechanical energy. Therefore, option (1) is correct.
How do motors convert energy?Energy can be described as the ability of an object to do work. Energy can also be transformed to work and the work done on an object can be stored in the form of energy.
The energy contained by the object because of its motion is called kinetic energy. The energy contained by an object due to its position is called its potential energy. Mechanical energy can be defined as the sum between the kinetic energy and potential energy of a body according to the law of conservation of energy.
An electric motor is a machine that receives energy from electricity as electrical energy and transforms it into mechanical energy. Therefore, when electric energy is supplied to an electric motor it converts electrical energy into mechanical energy.
Learn more about the electric motor, here:
https://brainly.com/question/1580875
#SPJ2
When you see the bright flash of a meteor, what are you actually seeing?.
The actual things we are seeing if we see the bright flash of a meteor are a pea-sized particle and the surrounding air as the particle burns up in our atmosphere.
What are meteors?
A meteor is a space rock that enters the atmosphere of the earth and produces a streak of light in the sky. Sometimes, people refer to them as shooting stars. When meteoroids enter the earth's atmosphere, they become meteors.
The night sky can be illuminated by meteors, also known as shooting stars, which are bits of space dust and debris that burn up in the Earth's atmosphere.
A pea-sized particle burns up in our atmosphere, and the surrounding air In other words, you do not see the particle itself, but only the effects it has on the surrounding air as it burns up.
Thus, we are seeing burned particles or dust when we see meteors.
To know more about meteors:
https://brainly.com/question/11504264
#SPJ12
Da 6.0 kg wooden crate slides across a wooden floor
at a speed of 2.4 m/s, it it takes an applica force
of 25 N to keep it going at a steady speed. What is the
coe of kinetic friction between the floor and crate?
Answer:coe?
Explanation:
Explain why the 4th state of matter would and would NOT make an acceptable force field.
The 4th state of matter would make an acceptable force field.
The 4th state of matter which is plasma would make an acceptable force field because this fourth state of matter is present in ionized form which has two charges on it i.e. cation which is a positive charge and anion which is a negative charge.
We know that charges attract as well repel other objects if they are strong enough. Positive charge repel positive charge but attract negative charge so we can conclude that 4th state of matter would make an acceptable force field.
Learn more: https://brainly.com/question/25628398
State a hypothesis about your estimated daily water use.
Answer
Estimates vary, but, on average, each person uses about 80-100 gallons of water per day, for indoor home uses.
Explanation:
150 J of work is done on a closed system, and 270 J of heat is added to the system. Does the internal energy of the system increase, decrease, or stay the same? If the internal energy changes, state the change in energy.
The change in the internal energy of the system will increase.
The given parameters;
work on the system, w = 150 Jheat added to the system, Q = 270 JThe change in the internal energy of the system is calculated by applying first law of thermodynamics as follows;
ΔU = Q + w
where;
ΔU is the change in the internal energyΔU = 150 J + 270 J
ΔU = 420 J
Thus, the change in the internal energy of the system increases.
Learn more here:https://brainly.com/question/16148588
Describe at least two similarities between untraviolet rays and microwaves
If anyone knows please anwser
Answer:
C.
Explanation:
Answer:
c. Radio and T.V. signals
A balance and a graduated cylinder are used to determine the density of a mineral sample. The sample has a mass of 14. 7 g and a volume of 2. 2 cm3. What is the density of the mineral sample?.
PLEASE HELP
While moving at a constant speed on a level, snowy surface, a snowmobile rider throws a snowball vertically up-
wards. If the snowmobile continues moving at a constant velocity, the ball returns to the driver. Explain, using one of Newton's Laws of Motion why the ball lands ahead of the driver if the snowmobile stops.
The ball lands ahead of the driver if the snowmobile stops in obedience to the law of inertia.
According to Newton's first law of motion, an object continues in its state of rest or uniform motion unless it is acted upon by an unbalanced external force. This is also known as the law of inertia.
The law of inertia explains the reluctance of an object to stop when it has started moving and also the reluctance of objects to start moving. The ball lands ahead of the driver if the snowmobile stops in obedience to the law of inertia.
Learn more: https://brainly.com/question/13678295
a car is moving due south for 4hr and covered a distance of 144km what is the velocity of the car?
Answer:
velocity ,V=?,T=4hr,Distance ,144km,
V=distance divide by time
=144/4=36km/hr
Global warming means that
Answer:
The earth is heating up.
Explanation:
This is due to human activities, primarily fossil fuel burning, which increases heat-trapping greenhouse gas levels in Earth's atmosphere.
The amount of heat that is needed to raise the temperature of 1
kg of some material by 1°C is called the of the material.
a. specific heat
b. state
c. temperature
d. charge
Answer:
a. specific heat
Explanation:
a. specific heat