In IPv6 addresses, ________ are separated by ________. In IPv6 addresses, ________ are separated by ________. fields; dots segments; dots fields; colons segments; colons

The network that works only in the direct line of sight is  c) Infrared communication.​

Infrared Wireless Communication serves as the type of wireless communication that do make use of infrared waves in wireless technology.

It should be noted that this is been used in the process of digital data transfer and this can be attributed to the electromagnetic spectrum  as well as  theobe that slightly longer wavelength than visible light,  having the wavelenght around  750 nanometers to 1 millimeter, Hence tey can be seen as one that works only in the direct line of sight.

Learn more about communication at:

https://brainly.com/question/28153246

#SPJ1

complete question;

Which of the following network works only in the direct line of sight? b) Mesh topology a) GPS d) Bluetooth c) Infrared communication​

Insertion sort is an algorithm that sorts an array by iterating through it and inserting each element into its proper position within a sorted subarray.

By using binary search to find the next insertion point, the algorithm can reduce the number of comparisons needed to find the correct position for the new element. However, this improvement does not change the overall complexity of the algorithm. The worst-case time complexity of insertion sort remains O(n^2) because in the worst case scenario, each element will need to be compared and potentially swapped with every other element in the array. Therefore, while binary search can make insertion sort more efficient in certain cases, it does not alter the fundamental complexity of the algorithm.

learn more about Insertion sort here:

https://brainly.com/question/31329794

#SPJ11

Passing arrays to a function and using pointers to pass an array to a function are two ways to achieve the same result. When passing an array to a function, the entire array is copied and passed to the function.

This can be inefficient if the array is large, as it takes up additional memory and slows down the program. Using pointers to pass an array to a function is a more efficient approach. Instead of copying the entire array, only the memory address of the array is passed to the function. This means that the function can access and modify the original array directly, without creating a separate copy. In both cases, the function can manipulate the values in the array and return the modified array. By using either method, the function can perform complex operations on the array without modifying the original array outside of the function. Overall, using pointers to pass an array to a function is more efficient and can lead to faster program execution. However, both methods can be effective in certain scenarios and should be used appropriately based on the needs of the program.

Learn more about array here:

https://brainly.com/question/30199244

#SPJ11

Within a table, two or more attributes may be combined to create a unique identifier called a composite key. A composite key ensures that the combination of these attributes is distinct and can be used to uniquely identify a specific record in the table.

Yes, within a table, two or more attributes may be combined to create a unique identifier that is called a composite key. A composite key is used to uniquely identify a specific record within a table and is created by combining two or more attributes that, individually, may not be unique. The combination of these attributes creates a unique value that can be used to identify a record in the table. Composite keys are commonly used in database design to ensure data integrity and to help prevent duplicate records from being entered into the table.

Learn more about design https://brainly.com/question/14035075

#SPJ11

A class definition for an abstract class Vehicle, including the requested terms and methods.

```java
public abstract class Vehicle {
   // Instance variable
   private double maxSpeed;

   // Protected instance variable
   protected double currentSpeed;

   // Constructor accepting a double to initialize maxSpeed
   public Vehicle(double maxSpeed) {
       this.maxSpeed = maxSpeed;
   }

   // Abstract method accelerate
   public abstract void accelerate();

   // Method getCurrentSpeed
   public double getCurrentSpeed() {
       return currentSpeed;
   }

   // Method getMaxSpeed
   public double getMaxSpeed() {
       return maxSpeed;
   }

   // Method pedalToTheMetal
   public void pedalToTheMetal() {
       while (currentSpeed < maxSpeed) {
           accelerate();
       }
   }
}
```

In this class definition, the Vehicle class is declared abstract as it contains an abstract method called accelerate. The class also contains instance variables for maxSpeed and currentSpeed, with currentSpeed being protected. There are methods for getting the values of these variables, as well as a method called pedalToTheMetal that repeatedly calls the abstract accelerate method until the vehicle's speed reaches maxSpeed.

To know more about abstract class Vehicle:

https://brainly.com/question/15046691

#SPJ11

The function "append" should read input from the user through standard input and add the elements to the end of an array called "a" that is partially-filled. The input should be ended with a negative number.

The function should first declare the array "a" and initialize it to the maximum size. It should then prompt the user to input numbers to be added to the array until they enter a negative number. Each input should be appended to the end of the partially-filled array.

To implement the `append` function, you would read numbers from the standard input one by one, checking if the number is negative. If the number is positive, you would append it to the end of the array `a` and update the size counter. Once a negative number is encountered, you would stop reading input and return the updated size of the array.

To know more about function visit:-

https://brainly.com/question/30046205

#SPJ11

A Linux server with a unique IP address is a computer running the Linux operating system that has been assigned a specific IP address, which enables it to communicate with other devices on the network

In a Linux server with five Ethernet devices, the decision to assign each device a unique IP address or not depends on the specific network requirements and the need for individual device identification.

If the Ethernet devices need to communicate independently and have their own unique identity on the network, then each device should be assigned a unique IP address. This allows for efficient routing of data packets between devices and enables clear identification of each device. Additionally, if each device needs to be accessible from outside the network, it will need its own IP address.

However, if the Ethernet devices are on the same network and do not require individual identification, they can share the same IP address. In this case, the devices can be differentiated based on their unique MAC addresses. Sharing an IP address can be useful in conserving IP addresses or in cases where there are limited IP addresses available.

In conclusion, the decision to assign a unique IP address to each Ethernet device in a Linux server depends on the specific requirements of the network and the devices on it. It is important to consider the need for device identification and efficient routing of data packets when making this decision. Sharing an IP address can be useful in some cases, but if each device needs its own unique identity, it should be assigned a unique IP address.

To know more about unique IP address  visit:

https://brainly.com/question/16927169

#SPJ11

A possible program that asks the user to enter the number of employees in an organization, the employees' names, and the number of hours they worked would involve using loops and arrays.

Below is an algorithm in pseudocode for a function that accepts an integer array as an argument and returns the total of the values in the array using a counted for loop.

Here is a sample code in Python:
num_employees = int(input("Enter the number of employees: "))
names = []
hours = []

for i in range(num_employees):
   name = input("Enter the name of employee #" + str(i+1) + ": ")
   names.append(name)
   hour = int(input("Enter the number of hours worked by " + name + ": "))
   hours.append(hour)

print("Employee hours:")
for i in range(num_employees):
   print(names[i] + ": " + str(hours[i]))

This program starts by asking the user to input the number of employees, which is converted to an integer using the int() function. It then uses two empty lists, names and hours, to store the names and hours worked of each employee, respectively. The program then uses a for loop to iterate through the range of num_employees, prompting the user to enter the name and hours worked for each employee. The name is appended to the names list, while the hour is converted to an integer and appended to the hours list. Finally, the program uses another for loop to print the names and hours worked of each employee.

Learn more about loops and array in python code here

https://brainly.com/question/31512399

#SPJ11

Both wired and wireless networks can use port security to enable you to blacklist or whitelist devices.

However, in wireless networks, additional measures such as MAC address filtering and WPA2 encryption are typically employed to enhance security. Whitelist devices are those that are authorized to access the network, while blacklist devices are those that are blocked or denied access. A wireless network is a type of computer network that uses wireless data connections to connect devices, such as computers, smartphones, and tablets, to the internet or other networks. Wireless networks use radio waves or infrared signals to transmit data between devices, without the need for physical cables or wired connections. Wi-Fi is the most common type of wireless network and is used in homes, offices, and public spaces such as cafes and airports. Wireless networks can be set up using routers, access points, and other networking devices, and can be secured using various encryption and authentication protocols to protect against unauthorized access.

Learn more about wireless networks here:

https://brainly.com/question/14921244

#SPJ11

The SQL data type that fits the given description is DECIMAL(7,2). This data type is used to store decimal numbers with a precision of seven and a scale of two.

The precision determines the total number of digits that can be stored, including the digits before and after the decimal point. The scale, on the other hand, represents the number of digits that can be stored after the decimal point.

DECIMAL(7,2) is a fixed-point data type, which means that the number of digits to the left and right of the decimal point is always the same. This data type is commonly used to store financial data such as currency, prices, and taxes. It can also be used to store physical measurements such as length, weight, and volume.

Using DECIMAL(7,2) ensures that the data is stored accurately and without loss of precision. It also provides consistent results when performing mathematical operations on the data. However, it should be noted that using this data type can result in larger storage requirements compared to other data types, such as FLOAT or REAL.

Learn more about SQL here:

https://brainly.com/question/13068613

#SPJ11

In the given code, the function `foobar` copies 24 bytes from the input `args` to the buffer `buf` using `strncpy`. The buffer `buf` has a size of 4 elements, where each element is a short, which is typically 2 bytes in size. Therefore, the buffer has a total size of 4 * 2 = 8 bytes.

As the function attempts to copy 24 bytes into an 8-byte buffer, it results in a buffer overflow.To determine the number of bytes of the saved frame pointer that can be overwritten, we need to consider the sizes of the local variables and the buffer:
- `unsigned int a` occupies 4 bytes.
- `unsigned int b` occupies 4 bytes.
- `short buf[4]` occupies 8 bytes.
The sum of these sizes is 4 + 4 + 8 = 16 bytes. Since 24 bytes are being copied into the 8-byte buffer, this overwrites the 8-byte buffer plus an additional 16 bytes beyond it. Thus, the saved frame pointer can have its entire size (typically 4 or 8 bytes, depending on the system) overwritten in this scenario.

Learn more about Foobar here:

https://brainly.com/question/29221883

#SPJ11

A(n) "embedded SQL statement" is the equivalent of a single SQL statement in an application program or transaction.

A SQL statement is a single command that is used to communicate with a database and retrieve or modify data. However, in an application program or transaction, a SQL statement may be executed multiple times or combined with other statements to perform a specific task.

In this context, a unit of work that corresponds to a single SQL statement is known as a database operation or database transaction. So, my answer to your question is that a database operation or database transaction is the equivalent of a single SQL statement in an application program or transaction.

To know more about SQL visit:-

https://brainly.com/question/30613739

#SPJ11

The correct answer is Input TextBox.

An Input TextBox control is a rectangular area on the form that allows the user to enter text or numeric data by typing it on the keyboard. It is a fundamental control used in most software applications that require user input. The Input TextBox control can be used to accept various types of data, such as text, numbers, dates, and times.

The Input TextBox control provides several properties that can be used to customize its appearance and behavior, such as the size and font of the text, the maximum number of characters that can be entered, and whether the input should be displayed as a password. It also has events that can be used to respond to user actions, such as when the user enters or changes text.

The Label control, on the other hand, is used to display text on a form, while the PictureBox control is used to display images.

Learn more about TextBox here:

https://brainly.com/question/14338971

#SPJ11

The bootrec /scanos command is used to scan for Windows installations that are not currently in the Boot Configuration Data (BCD) store.

This command displays the results of the scan without making any changes to the BCD store. This is a long answer to your question.
This command searches for Windows installations not currently in the BCD store and displays the results without making any changes. It is used to scan all disks for any Windows installations that are not currently in the Boot Configuration Data (BCD) store. This command displays a list of any detected Windows installations, but does not add them to the BCD store or modify any boot files. This command can be useful when troubleshooting boot-related issues, as it allows you to see if any Windows installations are present that are not being detected by the BCD store.

To know more about Windows visit :-

https://brainly.com/question/15539206

#SPJ11

The postInvalidate() method is a part of the Android View class, which is responsible for drawing and handling user interaction with the UI components.

When postInvalidate() is called with no parameters, it triggers a call to the invalidate() method of the View class. This method then invalidates the whole view, causing it to redraw on the next frame update.

Invalidation refers to the process of marking a view as needing a redraw. The invalidate() method schedules a redraw of the view by adding it to a queue of views that need to be redrawn. When the next frame update occurs, the system draws the view again.

The postInvalidate() method is useful in situations where you need to redraw a view but are not currently on the UI thread. By posting a message to the UI thread's message queue, you can trigger a redraw of the view from a different thread. This can be useful in cases where you are performing a long-running task that should not block the UI thread, but you still need to update the UI periodically.

Learn more about method  here:

https://brainly.com/question/30076317

#SPJ11

Password-based authentication can typically protect against attackers with low to moderate levels of motivation. In the case of a household computer, the primary concern is typically unauthorized access by individuals who may have physical access to the computer, such as family members, friends, or visitors.

Password-based authentication can effectively deter casual attackers with low motivation, such as curious family members or friends, who may attempt to access the computer out of curiosity or without malicious intent. It can also provide a basic level of protection against attackers with moderate motivation, such as individuals who may want to access sensitive personal information, steal data or engage in identity theft.

However, it is important to note that password-based authentication may not be sufficient to protect against attackers with high levels of motivation, such as professional hackers or cybercriminals who are well-versed in hacking techniques and have the resources and skills to crack passwords or bypass authentication measures. These attackers may use advanced techniques such as phishing, social engineering, or brute-force attacks to gain access to the computer or steal sensitive data.

Therefore, it is important to complement password-based authentication with other security measures such as regular software updates, anti-virus software, and firewall protection, as well as following best practices such as avoiding suspicious links, using strong passwords, and keeping sensitive information encrypted.

Learn more about authentication here:

https://brainly.com/question/31525598

#SPJ11

The correct recurrence relation that represents the Towers of Hanoi problem is option A, F(n) = 2F(n-1) + 1. This relation represents the number of moves required to transfer n disks from one pole to another using three poles.

The number of moves required to transfer n-1 disks is represented by F(n-1), and we need to add 1 more move to transfer the nth disk to the destination pole. The other (n-1) disks are then moved from the auxiliary pole to the destination pole, which requires F(n-1) moves again. Therefore, the total number of moves required is 2F(n-1) + 1. Option B, F(n) = nF(n-1) + 1, is incorrect as it represents the factorial of n, and not the number of moves required to solve the Towers of Hanoi problem. Option C, F(n) = F(n-1) + 2, is also incorrect as it represents the number of moves required to solve a problem with only two poles, and not the Towers of Hanoi problem with three poles. Option D, F(n) = 2F(n-1), is also incorrect as it only represents the number of moves required to transfer n-1 disks, and does not take into account the additional move required to transfer the nth disk to the destination pole. Therefore, the correct recurrence relation for the Towers of Hanoi problem is option A, F(n) = 2F(n-1) + 1.

Learn more about Towers of Hanoi problem here-

https://brainly.com/question/13110830

#SPJ11

To determine the names of the network interfaces (including the ISATAP interfaces) on a modern Windows computer, you must use the command "ipconfig /all" at the command prompt. This will display detailed information about all network interfaces on your system.

Ipconfig is a command-line tool used in Windows operating systems to display information about the computer's network configuration, including IP address, subnet mask, default gateway, DNS server, and more. It is used to diagnose and troubleshoot network connectivity issues.

To use the ipconfig command, follow these steps:

Open the command prompt by pressing the "Windows key" + "R" and typing "cmd" in the Run dialog box.

Type "ipconfig" and press Enter. This will display the current network configuration information, including the IP address, subnet mask, and default gateway for all active network connections.

To display more detailed information, such as the DNS server addresses, type "ipconfig /all" and press Enter.

To release the current IP address assigned by the DHCP server, type "ipconfig /release" and press Enter. To renew the IP address, type "ipconfig /renew".

To display only the IP address of the computer, type "ipconfig | findstr /i "IPv4"" and press Enter.

To learn more about Ipconfig Here:

https://brainly.com/question/31309044

#SPJ11

True. True cloud computing does indeed offer measured service, which means that users are billed based on how much capacity they actually utilize.

This allows for more accurate and efficient billing, as users are only charged for the resources they actually consume. This is in contrast to traditional hosting models, where users are typically charged a flat rate regardless of how much capacity they use.

True cloud computing offers measured service, which means that billing is based only on how much capacity each user takes advantage of. This allows users to pay only for the resources they consume, making it a cost-effective solution for many businesses and individuals.

To know more about Cloud Computing visit:-

https://brainly.com/question/31452048

#SPJ11

When using indexed sequential record organization, each entry in the index file contains the key value and the physical location of the data block where this record, and the records with smaller keys, are stored.

The index file is used to speed up access to records in a large file by providing a lookup table that maps keys to physical disk locations.

In this organization, the file is divided into fixed-size blocks, and the records within each block are stored in key order. The index file contains one entry for each block, with the key value of the first record in the block and the location of the block on disk.

To find a record, the system first reads the index file and searches for the index entry that has a key value greater than or equal to the desired key value. It then uses the block address in the index entry to locate the data block on disk and searches the records in that block for the desired record.

This organization provides faster access to records than sequential organization, especially when the file is large and the records are accessed randomly. However, it requires additional storage space for the index file and imposes some overhead in maintaining the index.

Learn more about sequential here:

https://brainly.com/question/14212897

#SPJ11

If the hardware settings in the BIOS are reset every time the machine is rebooted, it is likely that the CMOS battery needs to be replaced. The CMOS battery provides power to the BIOS settings when the computer is powered off, so when it runs out of power, the settings are lost.

To correct this problem, the technician should first check the age of the computer to ensure that the battery is due for replacement. The CMOS battery is usually a small, circular battery located on the motherboard, and can be easily replaced. The technician should consult the computer's manual or the manufacturer's website for instructions on how to replace the battery. Once the battery is replaced, the BIOS settings should remain intact after rebooting the computer. It's also a good idea to check if the BIOS firmware itself is outdated, as this could cause some instability and erratic behavior. If the firmware is outdated, updating it may also help resolve the issue.

To learn more about BIOS; https://brainly.com/question/13103092

#SPJ11

The number of elements examined when the target equals arr[31] will be log2(32) or 5 elements.

Since the array is arranged in ascending order, the most efficient searching algorithm that can be used is the binary search algorithm. Binary search works by dividing the array in half at each step and comparing the middle element with the target value. If the target is smaller than the middle element, the search continues in the left half of the array.

In this case, the target is arr[31], which is the 32nd element in the array (remember, arrays are zero-indexed). Using binary search, the algorithm will first compare arr[63] with the target. Since arr[31] is smaller than arr[63], the search continues in the left half of the array.

To know more about Elements visit:-

https://brainly.com/question/14819362

#SPJ11

The correct answer to this question is integration testing. Integration testing is a software testing technique used to test individual software modules or components as a group to ensure that they function properly together as a system. This type of testing is usually conducted after unit testing, where each module or component is tested in isolation.

Integration testing is important because it helps to identify and address any defects or issues that may arise when the various components of an information system are integrated and tested together. During integration testing, various techniques such as top-down, bottom-up, and big-bang integration are used to test different components of the system. The purpose of these techniques is to ensure that the system operates as a whole, and that individual components function properly in different scenarios. This type of testing involves testing the interfaces, communication protocols, and data transfer between different components of the system. In summary, integration testing is an essential part of software testing, which helps to ensure that the different components of an information system work properly together. It helps to identify any defects, errors, or issues that may arise during the integration process, and helps to ensure that the system operates as a whole.

Learn more about integration testing here-

https://brainly.com/question/13155120

#SPJ11

A "Remote Access Trojan (RAT)" is a program that hides in a computer and allows someone from a remote location to take full control of the computer.

Once an RAT is installed on a computer, it can allow the attacker to perform a range of activities such as stealing sensitive information, spying on the user's activities, taking screenshots, and even recording keystrokes. The attacker can also use the RAT to install additional malware or use the compromised computer to launch attacks on other targets.

A Remote Access Trojan (RAT) is a type of malware that, once installed on a victim's computer, enables a remote attacker to gain control over the system. This can be done for various purposes, such as stealing data, spying, or deploying other malware.

To know more about Program visit:-

https://brainly.com/question/30710581

#SPJ11

An Operating System (OS) can use a hardware interval timer to keep track of the time of day by periodically signaling an interrupt. The interval timer is a hardware device that counts down from a predetermined value, typically a time duration, and generates an interrupt signal when it reaches zero.

The OS initializes the interval timer with a specific time interval, usually a small fraction of a second. This interval is chosen to provide adequate granularity for the OS to maintain an accurate time of day. When the timer counts down to zero, it triggers an interrupt, which prompts the OS to execute an interrupt handler routine.
The interrupt handler routine is responsible for updating the OS's internal timekeeping data structures. It increments the time of day by the interval that the timer was set to, and then resets the interval timer to count down from the same value again. This process is repeated indefinitely, ensuring that the OS maintains an accurate time of day.
In summary, the OS uses the hardware interval timer to keep track of the time of day by periodically signaling an interrupt, which allows it to update its internal timekeeping data structures. The interval timer provides the OS with the necessary granularity to maintain accurate timekeeping, ensuring a reliable system clock.

Learn more about Inerval timer here:

https://brainly.com/question/31597003

#SPJ11

The type of authentication method commonly used with physical access control systems and relies upon RFID devices embedded into a token is known as RFID authentication or RFID access control.

RFID stands for Radio Frequency Identification, which is a technology that uses electromagnetic fields to identify and track objects that have RFID tags attached to them. In the case of physical access control systems, RFID devices are embedded into a token, such as an access card or key fob, which is used to gain entry to a secure area.

To gain access, the token is held near an RFID reader, which reads the unique identifier on the token and verifies it against a database of authorized users. If the token is re

cognized as belonging to an authorized user, the access control system grants access.

RFID authentication is a popular and effective method of physical access control as it is relatively easy to use and can quickly grant or deny access to a large number of users. Additionally, it can provide a high level of security by allowing access to only authorized personnel and providing an audit trail of entry and exit times.

Learn more about  RFID here:

https://brainly.com/question/29538641

#SPJ11

The phase of incident response that seeks to clean up the contamination that inevitably results after an unauthorized access to a system is called "eradication".

The phase of the incident response that seeks to clean up the contamination that inevitably results after an unauthorized access to a system is called "Eradication." The actions that are required to completely wipe the threat from the network or the system.

Eradication involves identifying and removing malicious elements, such as malware or unauthorized users, and taking steps to prevent future breaches or incidents.

To know more about Eradication phase

visit:

https://brainly.com/question/31114898

#SPJ11

In a Windows device driver, the dispatch routine is used by the I/O Manager to communicate with the driver when it generates an IRP (I/O Request Packet) after an I/O request. The dispatch routine is responsible for handling IRPs and processing them according to the functionality of the driver.

When the I/O Manager generates an IRP, it sends it to the driver's dispatch routine, which is a callback function defined by the driver. The dispatch routine is responsible for examining the IRP's contents, performing the requested I/O operation, and returning an appropriate status code to the I/O Manager.

The dispatch routine is an essential component of a device driver, as it acts as the bridge between the I/O Manager and the driver's functionality. Without a properly functioning dispatch routine, the driver cannot communicate with the I/O Manager and handle I/O requests, rendering it useless.

Learn more about Windows device driver here:

https://brainly.com/question/31252564

#SPJ11

The security design principle that is being described is "data classification".

Data classification is the process of categorizing data into different levels of sensitivity or importance, based on factors such as the potential impact of a security breach, regulatory compliance requirements, and business needs. Once data has been classified, appropriate security controls can be applied to protect the data based on its level of sensitivity.

In this scenario, the customer has decided to classify their data into sensitivity levels, and to use mechanisms such as encryption and tokenization to protect the data. Encryption is the process of converting data into a secret code to prevent unauthorized access, while tokenization is the process of replacing sensitive data with a non-sensitive placeholder value to prevent unauthorized disclosure.

By using these security mechanisms in conjunction with data classification, the customer is applying a "defense-in-depth" approach to security, which involves using multiple layers of security controls to protect against potential threats and attacks. This can help to ensure that the customer's data is protected at all times, regardless of where it is stored or transmitted.

Learn more about security here:

https://brainly.com/question/31684033

#SPJ11

TO convert the hexadecimal expansion of each of these in- tegers to a binary expansiona is  a. (80E)16 = (100000001110)2, ,b (135AB)16 = (00010011010110101011)2,   c. (ABBA)16 = (1010101110111010)2 d.  (DEFACED)16 = (11011110111101011110011101101)2

To convert (80E)16 to binary, we can convert each hexadecimal digit to a 4-bit binary number.

8 = 1000

0 = 0000

E = 1110

Thus, (80E)16 = (100000001110)2

b) (135AB)16

To convert (135AB)16 to binary, we can convert each hexadecimal digit to a 4-bit binary number.

1 = 0001

3 = 0011

5 = 0101

A = 1010

B = 1011

Thus, (135AB)16 = (00010011010110101011)2

c) (ABBA)16

To convert (ABBA)16 to binary, we can convert each hexadecimal digit to a 4-bit binary number.

A = 1010

B = 1011

B = 1011

A = 1010

Thus, (ABBA)16 = (1010101110111010)2

d) (DEFACED)16

To convert (DEFACED)16 to binary, we can convert each hexadecimal digit to a 4-bit binary number.

D = 1101

E = 1110

F = 1111

A = 1010

C = 1100

E = 1110

D = 1101

Thus, (DEFACED)16 = (11011110111101011110011101101)2

Learn more about hexadecimal here:

https://brainly.com/question/31478130

#SPJ11