In an effort to figure out why application rates are slipping, your college decides to set up an experiment to determine why students who are interested in the college decide to enroll or not. The college decides to send out a questionnaire to everyone who submitted an application to the college in 2017. What's the population for this study, and what's the sample?

A. The population is all college students everywhere, and the sample is all college students interested in your school.
B. The population is all college students everywhere, and the sample is the individuals who responded to the survey.
C. The population is all students who applied to your college, and the sample is the individuals who responded to the survey.
D. The population is all college students interested in your school, and the sample is everyone who decided to enroll.

The approximate probability that more than 10% of the sample would report that they experienced extreme levels of stress during the past month, obtained using the z-score for the proportion of the sample, and the standard error, is about 96.327%

The z-score of a sample proportion, z can be obtained using the formula;

z = (p - π)/√(π·(1 - π)/n)

Where;

p = The sample proportion

π = The proportion of the population

n = The sample size

The percentage of the students out of the 1750 students that experienced extreme levels of stress in the school, p = 15%

The number of students in the sample used by the newspaper, n = 160 students

The number of students in the sample that replied "yes" = 10%

The true proportion of the students that experience stress = 15%

The probability that ,more than 10% of the sample would report that they experienced extreme levels of stress during the past month can be found as follows;

The standard error is; SE = √(p × (1 - p)/n)

Therefore;

SE = √(0.15 × (1 - 0.15)/160) ≈ 0.028

The z-score is therefore;

z = (0.1 - 0.15)/0.028 ≈ -1.79

z = -1.79

The z-score indicates the number of standard deviations the proportion of the sample is from the true proportion

The proportion on the of the sample which is larger than 10% is obtained from the area under the normal curve, to the right of the z-score of -1.79, which is obtained as follows;

The z-value at z = -1.79 is 0.03673, which indicates that the area to the left of the z-value is 0.03673, and the area to the right is; (1 - 0.03673) = 0.96327

The probability observing a sample proportion more than 10% if the actual proportion is 15% is therefore; 0.96327 = 96.327%

Learn more on the standard error of a sampling distribution here: https://brainly.com/question/14467769

#SPJ1

Answer: x = -3, y = -4, or (-3, -4)

Step-by-step explanation:

To solve the system of equations, we can substitute the first equation into the second equation, replacing y with 3x + 5:

x + (3x + 5) = -7

Simplifying:

4x + 5 = -7

Subtracting 5 from both sides:

4x = -12

Dividing by 4:

x = -3

Now that we know x = -3, we can substitute that value into either of the original equations to find y:

y = 3(-3) + 5 = -4

Therefore, the solution to the system of equations is x = -3, y = -4, or (-3, -4).

Therefore , the solution of the given problem of function comes out to be  the zeros of the function y = x² + x - 2 are x = -2 and x = 1, and the polynomial in factored form is y = (x + 2)(x - 1).

All of the subjects, including actual and fictitious locales and arithmetic variable design, will be covered in the midterm exam questions. a schematic illustrating the connections between various components that work together to produce the same outcome. A service is made up of many unique parts that work together to produce unique outcomes for each input. Every postbox has a specific location that could serve as a refuge.

Here,

We can draw points for different values of x and y to graph the function => y = x² + x- 2:

|x| |y=x²+x-2|

|---|-----------|

|-3 | 4 |

|-2 | 0 |

|-1 | -2 |

|0 | -2 |

|1 | 0 |

|2 | 6 |

|3 | 12 |

We can use the elements in the table above to plot them on a graph and link them to create a parabolic shape.

We can search for the values of x where the function y = 0 to determine the function's zeros.

Using the zeros we discovered, we can recast the function as the polynomial in factored form is:

=> y = (x + 2)(x - 1)

Therefore, the zeros of the function y = x² + x - 2 are x = -2 and x = 1, and the polynomial in factored form is y = (x + 2)(x - 1).

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

Point (-24,7) on terminal side on angle theta having trigonometric ratio equals to,

sin(θ) = 7/25                       csc(θ) = 25/7

cos(θ) = -24/25                   sec(θ) = -25/24

tan(θ) = -7/24                      cot(θ) = -24/7

Values of the trigonometric functions for an angle θ.

In standard position with the given point (-24, 7) on its terminal side.

Hypotenuse of the right triangle formed by the angle and its terminal side using the Pythagorean theorem,

Hypotenuse = √((-24)^2 + 7^2)

⇒Hypotenuse = √(576 + 49)

⇒Hypotenuse = √(625)

⇒Hypotenuse = 25

Signs of the sine, cosine, tangent, cosecant, secant, and cotangent based on the quadrant in which the angle lies.

x-coordinate is negative and the y-coordinate is positive, the angle is in the second quadrant.

This implies,

sin(θ) = 7/25

cos(θ) = -24/25

tan(θ) = -7/24

csc(θ) = 25/7

sec(θ) = -25/24

cot(θ) = -24/7

cosecant, secant, and cotangent are the reciprocals of the corresponding sine, cosine, and tangent values.

Therefore, the exact values of trigonometric ratios for the given point are,

sin(θ) = 7/25                       csc(θ) = 25/7

cos(θ) = -24/25                   sec(θ) = -25/24

tan(θ) = -7/24                      cot(θ) = -24/7

learn more about point here

brainly.com/question/30465906

#SPJ4

Answer:

≈ 4.57

Step-by-step explanation:

(-2) ^ 2 = 4

4 - (-28) = 4 + 28 = 32

32/7 ≈ 4.57

The answer of the given question based on explaining the meaning of symmetric group Sₓ on X the answer is given below,

In mathematics, permutation is  way of arranging  set of distinct objects in particular order. A permutation of  set is bijection from the set to itself, meaning that each element in  set is mapped to a unique element, and every element in  set is mapped to exactly once. For example, the set {1, 2, 3} can be permuted in six different ways: (1, 2, 3), (1, 3, 2), (2, 1, 3), (2, 3, 1), (3, 1, 2), and (3, 2, 1). Permutations have important applications in group theory, combinatorics, and cryptography.

The symmetric group Sₓ on X is a group of permutations of a set X, where Sₓ is the set of all possible bijections from X to X. In other words, the elements of Sₓ are all possible ways of rearranging the elements of X, while still maintaining the structure of the set. A permutation is a bijection that maps each element of X to a unique element of X.

The order of the symmetric group Sₓ on X is the number of elements in X, denoted by |X|. The symmetric group has important applications in group theory, algebraic geometry, and combinatorics. It is also a fundamental concept in the study of abstract algebra and is used to study the properties of permutations, symmetry, and groups.

To know more about Bijection visit:

https://brainly.com/question/13012424

#SPJ1

The symmetric group S_X on a set X is the group of all permutations of the elements in X.

A bijective function, also known as a bijection, is a type of function in mathematics where every element in the domain (input) is paired with a unique element in the range (output), and every element in the range has a corresponding element in the domain. In other words, a bijection is both injective (one-to-one) and surjective (onto).

A function f: X → Y is said to be bijective if:

Every element in X is paired with a unique element in Y (one-to-one or injective). This means that no two elements in X are mapped to the same element in Y.

Every element in Y has a corresponding element in X (onto or surjective). This means that every element in Y is mapped to by at least one element in X.

A permutation of X is a bijective function that maps each element of X to a unique element of X. The symmetric group S_X contains all possible permutations of the elements of X, and the group operation is function composition.

In other words, if X is a set with n elements, then the symmetric group S_X contains all possible bijections from X to itself, which means there are n! (n factorial) elements in S_X. Each element in S_X represents a unique way to permute the elements in X.

For example, let X = {1, 2, 3}. The symmetric group S_X on X contains the following six elements (permutations):

These six permutations form a group under function composition, which is the symmetric group S_X on X.

To know more about permutations visit:

https://brainly.com/question/1216161

#SPJ1

As a result, the likelihood that a client will submit a legitimate warranty claim is: P(valid claim) = P(faulty and used) = P(faulty) * P(used) = 0.1 * 0.75 = 0.075

Chance is a way to gauge how likely something is to happen. A number between 0 and 1, where 0 denotes an impossibility and 1, a certainty, is used to describe it. If you flip a fair coin, for instance, the likelihood that it will land heads up is 0.5 because there are two equally probable outcomes (heads or tails). Similar to fair six-sided dice, only one of the six equally probable outcomes—rolling a 1, 2, 3, 4, 5, or 6—is a 4, so the probability of rolling a 4 is 1/6, or roughly 0.167.

given

Both the likelihood that a customer's bike is flawed and the likelihood that they will use the bike within the first year affect the likelihood that they will submit a legitimate warranty claim.

To determine the likelihood that both occurrences will occur simultaneously, we can use the probability multiplication rule:

P(used and faulty) = P(defective) * P (used)

10%, or 0.1, is the chance that a Peloton bicycle is broken. 75%, or 0.75, is the chance that a customer will use the bike in the first year.

As a result, the likelihood that a client will submit a legitimate warranty claim is: P(valid claim) = P(faulty and used) = P(faulty) * P(used) = 0.1 * 0.75 = 0.075 .

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

Answer:

6)-56+567)-/(05(-)9

Step-by-step explanation:

Question

Katherine bought 312

pounds of oranges for $1.45

per pound, as well as 434

pounds of potatoes that cost $1.69

for 2

pounds. She gives the cashier a $10.00

bill.

Which equation represents the situation if x

is the amount of change in dollars Katherine should receive?

A 312(1.45)+434(1.69)+x=10

3 and 1 half times 1 point 4 5 plus 4 and 3 fourths times 1 point 6 9 plus x is equal to 10

B 312(1.45)+434(1.692)+x=10

3 and 1 half times 1 point 4 5 plus 4 and 3 fourths times open paren 1 point 6 9 over 2 close paren plus x is equal to 10

C 312(1.45)+434(1.692)−x=10

3 and 1 half times 1 point 4 5 plus 4 and 3 fourths times open paren 1 point 6 9 over 2 close paren minus x is equal to 10

D (312+434)⋅(1.45+1.69)+x=10

HELP ME I WILL GIVE BRAINLIEST

Answer:230

Step-by-step explanation:

f(x) = (x+4)^2(x-3) has polynomial function with the following zeros: double zero at -4 simple zero at 3.

If a polynomial has a double zero at -4, it means that it can be factored as (x+4)^2.

If it also has a simple zero at 3, then the factorization must include (x-3).

Therefore, the polynomial function with these zeros is :-

f(x) = (x+4)^2(x-3)

This polynomial has a double zero at -4, because $(x+4)^2$ has a zero of order 2 at -4, and a simple zero at 3, because $(x-3)$ has a zero of order 1 at 3.

To know more about polynomial-

brainly.com/question/11536910

#SPJ4

Answer:

6

Step-by-step explanation:

We know that a dozen is the value of 12 so to find half a dozen we simply need to half it!

This means that there are 6 eggs in a half dozen.

FUN FACT:

A baker's dozen is 13, one more than a regular dozen!

Hope this helps, have a lovely day!

Answer:

258 m/s

250 m/s

Step-by-step explanation:

s = 2t³

s(5) = 2(5)³ = 250

s(8) = 2(8)³ = 1024

average = (s(8) - s(5))/(8 - 5) = (1024 - 250)/3 = 258 m/s

s(5) = 2(5)³ = 250 m/s

Answer:

1 : 3.5

Step-by-step explanation:

Rewrite the ratio 6:21 as 1 : n .

Divide each side by 6.

6/6 : 21/6

1 : 3.5

The box in the middle of the plot spans from the first quartile (Q1) to the third quartile (Q3), with a line inside representing the median.

A whisker plot, also known as a box and whisker plot, is a graphical representation of a set of numerical data through their quartiles. The plot consists of a box with whiskers extending from the top and bottom, showing the spread and distribution of the data. The five-number summary, which includes the minimum value, first quartile (Q1), median, third quartile (Q3), and maximum value, is used to create the whisker plot.

Here,

To create a box and whisker plot, we need to find the five-number summary of the data set, which includes:

Minimum value: the smallest value in the data set.

First quartile (Q1): the median of the lower half of the data set.

Median: the middle value in the data set.

Third quartile (Q3): the median of the upper half of the data set.

Maximum value: the largest value in the data set.

First, we need to put the data in order:

10, 12, 14, 15, 16, 18, 22, 24, 25, 28

The minimum value is 10 and the maximum value is 28.

The median is the middle value, which is 18.

To find the first quartile, we need to find the median of the lower half of the data set, which is:

10, 12, 14, 15, 16

The median of this lower half is 14.

To find the third quartile, we need to find the median of the upper half of the data set, which is:

22, 24, 25, 28

The median of this upper half is 24.

So, the five-number summary for this data set is:

Minimum value = 10

First quartile (Q1) = 14

Median = 18

Third quartile (Q3) = 24

Maximum value = 28

Now we can use this information to create the box and whisker plot:

      |          |      

 ----+----+----+----+----

    10   14   18   24   28

The box in the middle of the plot spans from the first quartile (Q1) to the third quartile (Q3), with a line inside representing the median. The whiskers extend from the box to the minimum and maximum values in the data set.

To know more about whisker plot,

https://brainly.com/question/2742784

#SPJ1

To sketch the phase plane and trajectories of both populations in the competing species model, plot the population of one species on the x-axis and the population of the other species on the y-axis. Then, plot the isoclines and use them to determine the direction and stability of the population trajectories.

The competing species model is a system of two differential equations that describe the population dynamics of two species competing for the same resources. To sketch the phase plane and trajectories, plot the population of one species on the x-axis and the population of the other species on the y-axis. Then, plot the isoclines, which are curves that represent the values of one species' population at which the other species' population does not change.

The isoclines are found by setting each differential equation to zero and solving for one population in terms of the other. For example, the isocline for species 1 is found by setting dN1/dt = 0 and solving for N2. The resulting equation gives the values of N2 at which the population of species 1 does not change. Plotting these curves on the phase plane divides it into regions where the population of each species increases or decreases.

The direction and stability of the population trajectories can be determined by analyzing the slope of the vector field, which represents the rate of change of the population at each point in the phase plane. Trajectories move in the direction of the vector field, and their stability depends on the curvature of the isoclines. If the isoclines intersect at a single point, it is a stable equilibrium where both populations coexist. If they intersect at multiple points, the stable equilibrium depends on the initial conditions of the populations. If they do not intersect, one species will eventually drive the other to extinction.

To know more on competing species model

https://brainly.com/question/15100592

#SPJ4

--The question is incomplete, answering to the question below--

"Consider the competing species model, how to sketch the phase plane and the trajectories of both population"

Answer:

4.3

Step-by-step explanation:

a) The probability of no orders in 5 minutes is calculated to be 0.36788.

b) The probability of three or more orders in 5 minutes is calculated to be 0.08.

c) The length of the time interval such that the probability of no orders in a time interval of this length is 0.001 is calculated to be 34.5 min.

X is assumed to be the poisson's distribution where λ = 12 orders per hour.

a) At T = 1/12 hours which is 5 min, probability of no orders,

P (X = 0) = e^(-12/12) = 0.36788

b) At T = 1/12 hours which is 5 min, probability of three or more orders,

P (X ≥ 3) = 1 - P (X ≤ 2) = 1 - e⁻¹(1 + 1 + 1/2) = 0.08

c) Let us find the interval T for which:

P (X = 0) = 0.001

e^(-12T) = 0.001

Solving the equation for T we have,

T = -1/12 ln(0.001) = 0.5756 hours = 34.5 min

To know more about probability:

https://brainly.com/question/22714682

#SPJ4

The value of n for the ascending powers of x is found to be 20.

A series expansion is just a representation of a specific function as the sum of powers in a single of its variables or by the sum of powers of this other function, typically an elementary one.

For several popular functions, we give series expansions (most Maclaurin, most Laurent, and some Puiseux). The above-mentioned equation for Taylor's series can be thought of to be the expansion of f(x+h) around the origin x. A function f(x) is frequently expanded around the point x = 0.

Using the expansion of the function-

ⁿC₁= (n!)/(n – 1)!1! = (n(n – 1)!)/(n – 1)!1!= n/1!= n.

(1 + 2x)ⁿ= ⁿC₀(1)ⁿ ⁻ ⁰(2x)⁰ + ⁿC₁(1)ⁿ ⁻ ¹(2x)¹ + ...

            = 1 + n(1)(2x) + ...

(1 + 2x)ⁿ  = 1 + 2nx + ...

Now,

The second term is 2nx.

2n= 40

n = 40/2= 20.

Thus, the value of n for the ascending powers of x is found to be 20.

Know more about the expansion function

https://brainly.com/question/28219698

#SPJ1

Answer:

x²  + 4x - 6

Step-by-step explanation:

x(x + (1 + x) + 2x) - 3(x² - x + 2) ← simplify parenthesis on left

= x(x + 1 + x + 2x)  - 3(x² - x + 2)

= x(4x + 1) - 3(x² - x + 2) ← distribute parenthesis

= 4x² + x - 3x² + 3x- 6 ← collect like terms

= x² + 4x - 6

The sum of the interior angles of a quadrilateral is 360°. We can use this fact to find the measures of the other two angles.

Let x be the measure of one of the two angles in the 2:3 ratio. Then, the measure of the other angle is 3x (since the two angles are in a ratio of 2:3).

We know that:

252° + 63° + 2x + 3x = 360°

Simplifying this equation, we get:

5x + 315° = 360°

5x = 45°

X= 9°

Therefore, one of the angles has a measure of 2x = 18°, and the other angle has a measure of 3x = 27°.

Answer:

The 4 angles of the quadrilateral are : 252, 63, 18 and 27

Step-by-step explanation:

252 + 63 + 2x + 3x = 360

315 + 5x = 360

5x = 45 ( 360-315 )

x = 9

Therefore, 1st angle = 2x = 18

2nd angle = 3x = 27

The probability that the person chosen is a woman is 0.51.

The probability that the person chosen favors pink or purple is 0.67.

The probability that a person that favors turquoise is a man is 0.66.

Probability is the odds that a random event would occur. The odds that the event occurs has a probability value that lies between 0 and 1. The more likely it is that the event would happen, the closer the probability value would be to 1.

The probability that the person chosen is a woman = number of women / total number of people = 152 / 300 =  0.51.

The probability that the person chosen favors pink or purple = (number of people who favor pink / total number of people) + (total number of people that favor purple / total number of people) = (50 /300) + (50 / 300) =  0.67.

The probability that a person that favors turquoise is a man = men who favor turquoise / total number of people who favor turquoise = 79/120 = 0.66

To learn more about probability, please check: https://brainly.com/question/13234031

#SPJ1

The function for the value of the account after t years can be written as:

V(t) = 93000(1.08900365)t

The coefficient of 1.08900365 is the annual growth rate (APR) compounded daily. After rounding to four decimal places, it becomes 1.0890.

The percentage of growth per year (APY) is 8.90%. This is the same as APR, but expressed as a percentage.

The volume of the prism is equal to 40x m³.

The volume of the cylinder is equal to 72π m³.

The value of x to the nearest tenth is equal to 5.7 meters.

Mathematically, the volume of a rectangular prism can be calculated by using this formula:

Volume = L × W × H

Where:

Substituting the given parameters into the formula for the volume of a rectangular prism, we have;

Volume of a rectangular prism, V = 5 × x × 8

Volume of a rectangular prism, V = 40x m³.

For the volume of the cylinder, we have:

Volume of a cylinder, V = πr²h

Volume of a cylinder, V = π × 3² × 8

Volume of a cylinder, V = 72π m³.

Next, we would solve for x;

40x = 72π

40x = 226.1947

x = 226.1947/40

x = 5.7 meters.

Read more on cylinder here: brainly.com/question/14060443

#SPJ1

Complete Question:

Rectangular prism and a cylinder both have a height of 8 m, and their cross-sectional areas are equal at every level parallel to their respective bases.

A rectangular prism and a cylinder both have a height of 8 meters. The rectangle has base dimensions of 5 meters by x. The cylinder has a radius of 3 meters.

Complete the steps to find the width of the prism.

Find the volume of the prism.

V = m3

Find the volume of the cylinder.

V = m3

Set the volumes equal to each other and solve for x. Round to the nearest tenth.

x = m

The initial squirrel population was 75. The squirrel population t years in an equation can be determined as P(t) = 75 * 2^(t/6). The expected squirrel population 10 years from now is 261.80.

A. Let  initial squirrel population = x

It is given that the population doubles every six years.

so after 18 years, the population has doubled three times. So, the equation will be:

x * 2^3 = 60

x * 8 = 600

x = 75

The initial squirrel population was 75.

B.  Let squirrel population t years = P(t)  

It is given that the population doubles every six years, then the equation will be written as:

P(t) = 75 * 2^(t/6)

C. To calculate the estimation of squirrel population 10 years from now,

t = 10 can be substituted in the above equation.

P(10) = 75 * 2^(10/6)

P(10) =  261.80

Therefore,  we can conclude that the expected squirrel population 10 years from now is 261.80.

To learn more about population estimation

https://brainly.com/question/30509475

#SPJ4

To rewrite a number with a radical in the denominator without the radical, we can use the conjugate of the denominator. The conjugate of a binomial expression a + b is a - b, and the conjugate of a - b is a + b.

Suppose we have a number with a radical in the denominator, such as 1/√2. To rewrite this without the radical, we multiply the numerator and denominator by the conjugate of the denominator, which is

√2: 1/√2 = (1/√2) * (√2/√2) = √2/2

Note that the product of the denominator and its conjugate is always a difference of squares, which can be simplified to an integer without a radical.

To know more about denominator, here

brainly.com/question/7067665

#SPJ4

The equations that define y as a nonlinear function of x are: C. y = 5/x and E. y = 3x² - 2

In mathematics, a function is a relationship between a set of inputs and a set of possible outputs with the property that each input is related to exactly one output. It is a rule or a set of rules that assigns each input value exactly one output value. Functions can be represented using equations, graphs, or tables. They are used to model real-world phenomena and solve problems in various fields such as science, engineering, economics, and finance.

Here,

A function is considered nonlinear if it does not have a constant rate of change or a straight-line graph. In other words, if the function does not follow a linear pattern.

A. y = -3/4x is a linear function because it has a constant rate of change of -3/4 and a straight-line graph.

B. y = 1/2x - 8 is a linear function because it has a constant rate of change of 1/2 and a straight-line graph.

C. y = 5/x is a nonlinear function because it does not have a constant rate of change and its graph is not a straight line. It is a hyperbola.

D. y = -3 + 2x is a linear function because it has a constant rate of change of 2 and a straight-line graph.

E. y = 3x² - 2 is a nonlinear function because it does not have a constant rate of change and its graph is a parabola.

Option A and D are linear functions, while option B is a linear function with a constant term.

To know more about function,

https://brainly.com/question/28193995

#SPJ1

The direction of the current in the current-carrying wire that produces the field indicated in the figure is given below.

Conventionally, a positive charge would go in the same direction as an electric current. As a result, the battery's positive terminal receives less current in the external circuit than its negative counterpart. Indeed, electrons would go in the reverse direction across the cables.

According to Fleming's right-hand rule gives which direction the current flows. The right hand is held with thumb, index finger & middle finger mutually perpendicular to each other. The thumb is pointed in direction of motion to magnetic field of conductor relative to magnetic field.

(A) from right hand rule direction of current is towards left.

(B) Out of the Screen.

(C) Lower left to upper right.

According to Fleming's Right Hand Rule, if the thumb, forefinger, and middle finger are arranged in a straight line on the right hand, the thumb will point in the direction of the conductor's motion in relation to the magnetic field, the forefinger will point in the direction of the magnetic field, and the middle finger will point in the direction of the induced current.

Learn more about direction of the current :

https://brainly.com/question/15912115

#SPJ4

The average case complexity is a measure of the expected performance of an algorithm when the input is chosen randomly. The average case complexity of binary search is O(log n), where n is the size of the input.

Average case complexity is a measure of the expected running time of an algorithm when it is run on inputs that are drawn randomly from a specified probability distribution. The average case complexity provides a more realistic estimate of the performance of an algorithm in real-world scenarios.

For binary search, the average case complexity can be derived by considering the probability distribution of the search key in the sorted input array. Assuming a uniform distribution of search keys, the probability of finding a key at any position in the array is 1/n, where n is the size of the array.

Let T(n) be the average case time complexity of binary search on an input array of size n. In the best case, the search key is found in the middle of the array in O(1) time. In the worst case, the search key is not present in the array, and the algorithm performs O(log n) comparisons.

In the average case, the probability of finding the key at any position is 1/n, and the number of comparisons required to find the key is proportional to the distance between the key and the middle of the array. Therefore, the average number of comparisons required in the average case is:

1/n * (1 + 2 + ... + n-1) = (n-1)/2n

Thus, the average case time complexity of binary search is O((n-1)/2n) = O(log n), which is the same as the worst-case time complexity.

Learn more about complexity of binary search here: brainly.com/question/29734003

#SPJ4

Using linear regression on the given data the equation we got in the form of y =mx + c is y = 243x - 16.50

What is linear regression?

Linear regression analysis is used to predict the value of a variable based on the value of another variable. The variable you want to predict is called the dependent variable. The variable you are using to predict the other variable's value is called the independent variable.

To find the equation for the linear function that best fits the given data, we can use linear regression. Using a calculator or software, we can find the following:

The mean of x is 3.5 and the mean of y is 150.

The variance of x is 2.5 and the variance of y is 2203.5.

The covariance of x and y is 607.5.

Using these values, we can calculate the slope of the regression line:

m = covariance of x and y / variance of x = 607.5 / 2.5 = 243

We can also calculate the y-intercept of the regression line:

b = mean of y - m * mean of x = 150 - 243 * 3.5 = -16.5

Therefore, the equation for the linear function that best fits the given data is:

y = 243x - 16.5

Rounding both numbers to two decimal places, we get:

y = 243x - 16.50

Learn more about linear regression on:

https://brainly.com/question/25987747

#SPJ1

Using linear regression on the given data the equation we got in the form of y =mx + c is y = 243x - 16.50

What is linear regression?

A variable's value can be predicted using linear regression analysis based on the value of another variable. The dependent variable is the one you want to be able to forecast. The independent variable is the one you're using to make a prediction about the value of the other variable.

To find the equation for the linear function that best fits the given data, we can use linear regression. Using a calculator or software, we can find the following:

The mean of x is 3.5 and the mean of y is 150.

The variance of x is 2.5 and the variance of y is 2203.5.

The covariance of x and y is 607.5.

Using these values, we can calculate the slope of the regression line:

m = covariance of x and y / variance of x = 607.5 / 2.5 = 243

We can also calculate the y-intercept of the regression line:

b = mean of y - m * mean of x = 150 - 243 * 3.5 = -16.5

Therefore, the equation for the linear function that best fits the given data is:

y = 243x - 16.5

Rounding both numbers to two decimal places, we get:

y = 243x - 16.50

Learn more about linear regression on:

https://brainly.com/question/25987747

#SPJ1

Answer:

C

Step-by-step explanation: