In a polar covalent bond, electrons are shared ___________.
A. equally
B. unequally
C. between non-metals with similar electronegativities
D. between a metal and a non-metal

The mechanism of a reaction can be determine by the overall sequence of the elementary reactions is called as the mechanism of the reaction.

The mechanism of the reaction is the sum of all the individual steps, or the elementary reactions, in the mechanism that  provides the balanced chemical equation of the overall reaction. The overall sequence of the elementary reactions is called as the mechanism of the reaction.

A mechanism of the is the step by the step sequence of the elementary reactions by which the overall chemical change is occurs. The mechanism of the reaction is the actual process by which the reaction takes place.

To learn more about mechanism here

https://brainly.com/question/14280641

#SPJ4

The electronic configuration of the Sulfur with the atomic number of 16 is as : 1s² 2s² 2p⁶ 3s² 3p⁴ .

The atomic number of the sulfur is 16. The sulfur has the total number of the electrons is 16 , the number of the protons are 16 and the number of the neutrons are the 16. The electronic configuration of the sulfur is as follows :

The electronic configuration of the sulfur, S = 1s² 2s² 2p⁶ 3s² 3p⁴

The the Sulfur belongs to group 16 in the Modern periodic table. The Sulfur is placed in the third period in the modern periodic table.

To learn more about electronic configuration here

https://brainly.com/question/29757010

#SPJ4

The glucose with the molecular formula of C₆H₁₂O₆ does not dissociates into the ions it will remain same as the molecule.

The glucose that is the C₆H₁₂O₆ is the covalent compound. The covalent compound is the compound which is formed in between the atoms or the molecules with the mutual sharing of the electrons. This compound contains the three non metallic  elements. When the non metal bond they will share the electron pairs and form the covalent compound. It is typical example of the nonelectrolyte. The Glucose is also known as the which sugar dissolves readily in water.

Thus, the glucose does not dissociates in to the ions it stays same as the molecule.

To learn more about glucose here

https://brainly.com/question/30548064

#SPJ4

There are five common types of reactions which are combination, decomposition, single-replacement, double-replacement, and combustion reactions.

Combination Reactions are defined as the reactions in which two or more reactants combine between itself in order to form one product.

Decomposition reactions are defined as the processes in which chemical species break up into simpler parts. Basically, decomposition reactions require input of energy.

A single replacement reaction, also called a single displacement reaction, is defined as a reaction in which one element is substituted for another element in a compound to form a different product.

A double-replacement reaction is defined as a reaction in which the positive and negative ions of two ionic compounds usually exchange places to form two new compounds.

Combustion is defined as a chemical process in which a substance reacts rapidly with oxygen and gives off heat in the product side.

Learn more about chemical reactions from the link given below.

https://brainly.com/question/29039149

#SPJ4

The weight percent of H₂SO4in the solution is 15.98%.

To calculate the weight percent of H₂SO4in the solution, we need to first find the mass of H₂SO4in the solution. We can use the molarity of the solution and the molar mass of H₂SO4to calculate the mass of H₂SO4present:

Calculate the number of moles of 4:

Molar mass of H₂SO4 = 2(1.008 + 32.06 + 4(16.00)) = 98.08 g/mol

Number of moles of H₂SO4= mass of H₂SO4 / molar mass of H₂SO4

= 17.75 g / 98.08 g/mol

= 0.1809 mol

Calculate the mass of the solution:

Mass of the solution = volume of the solution x density of the solution

= 100.0 ml x 1.1094 g/ml

= 110.94 g

Calculate the mass of H₂SO4in the solution:

Mass of H₂SO4in solution = number of moles of H₂SO4x molar mass of H₂SO4

= 0.1809 mol x 98.08 g/mol

= 17.73 g

Now that we know the mass of H₂SO4in the solution, we can calculate the weight percent of H₂SO4:

Weight % H₂SO4= (mass of H₂SO4/ mass of solution) x 100%

= (17.73 g / 110.94 g) x 100%

= 15.98%

Therefore, the weight percent of H₂SO4in the solution is 15.98%.

Learn more about mass of solution here :

brainly.com/question/29482678

#SPJ4

Answer:

the glass and water maybe

Ionic and Covalent Bonds.

Ionic bonds are between metals and non-metals, where electrons are transferred from the metal to the non-metal.

Covalent bonds are between non-metals, where electrons are shared between atoms and are not lost or gained.

In Anions, electrons are gained

Anions are negatively charged ions. They gain electrons to achieve a stable electron configuration.

b) Electrons are negatively charged subatomic particles that orbit the nucleus of an atom. They are responsible for chemical reactions and the formation of chemical bonds between atoms.

The most common examples of anions are halide ions such as chloride (Cl-), bromide (Br-), and iodide (I-), which are formed by the addition of an extra electron to the outermost shell of a halogen atom.

Other examples of anions include hydroxide (OH-), sulfate (SO42-), and nitrate (NO3-), which are important in many chemical reactions and biological processes. Anions are usually attracted to positively charged ions or molecules, called cations, to form ionic compounds.

Learn more about anions here https://brainly.com/question/11896031

#SPJ1

To deprotonate water, we need to choose a conjugate base with a pKa value greater than the pKa value of water (pKa = 15.7). The following are the conjugate bases with pKa values greater than 15.7:

CH3- (pKa = 50)

Out of these, the strongest base would be , with a pKa value farthest from that of water. Therefore,  is the least likely conjugate base to deprotonate water.

That in practice, the extent to which a conjugate base deprotonates water also depends on factors such as concentration, solvent, and temperature, as well as the identity and concentration of any other acids or bases present.

For such more question on deprotonate

https://brainly.com/question/11732200

#SPJ4

Since the breakdown of hydrogen peroxide can cause a reduction in concentration and potency over time, it is a good idea to check the concentration of hydrogen peroxide that has been exposed to air and light.

The chemical student employed titration with potassium permanganate to measure the quantity of hydrogen peroxide.

Using this technique, the volume of potassium permanganate solution needed to completely react with the hydrogen peroxide sample is measured after adding a known quantity of a standard potassium permanganate solution to the hydrogen peroxide sample until the reaction is complete.

Hydrogen peroxide and potassium permanganate react in the following way: 5 H2O2 + 2 KMnO4 + 3 H2SO4 5 O2 + 2 MnSO4 + K2SO4 + 8 H2O

The amount of hydrogen peroxide in the sample may be determined from the volume and concentration of the potassium permanganate solution used in the titration because the reaction uses 5 moles of hydrogen peroxide for every 2 moles of potassium permanganate.

The chemical student should carry out the following procedures to examine the hydrogen peroxide samples in dark and light vials that have been exposed to air for 10, 20, and 30 hours:

1. Make a standard potassium permanganate solution with a known concentration.

2. Pour a known volume of each test sample of hydrogen peroxide into a flask.

3. To serve as a catalyst for the reaction, add a tiny quantity of diluted sulfuric acid to the hydrogen peroxide sample.

4. Continue titrating the hydrogen peroxide sample with the potassium permanganate standard solution until the reaction is finished, which is shown by a lingering pink hue of the potassium permanganate solution.

5. To confirm the correctness of the results, repeat the titration using the same sample.

6. Using the volume and concentration of the potassium permanganate solution used in the titration, determine the concentration of hydrogen peroxide in the sample.

The chemical student can find out if the exposure to air and light has changed the concentration of hydrogen peroxide over time by analysing the concentration of hydrogen peroxide in the light and dark vials after 10, 20, and 30 hours.

The findings may be calculated by comparing them to the original concentration of 3% by weight.

For such more questions on Concentration

https://brainly.com/question/26255204

#SPJ4

Halogens on two adjacent carbon atoms in a benzene ring are in the para position.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

Answer:

the correct answer is ortho-position

The items required to run the spectrophotometry experiment exists Spectrophotometer, Blank solution, Sample solution, Cuvette and Stir bar.

Spectrophotometry is an experimental method for determining the concentration of solutes in a particular solution by estimating the amount of light that each solute absorbs. Because specific substances will absorb certain light wavelengths at various intensities, this technique is effective.

By measuring the intensity of light as a beam of light travels through a sample solution, a technique called spectrophotometry can determine how much light a chemical component absorbs.

The spectrophotometer is the device used to calculate how much light the sample absorbs. In order to measure the sample's light's intensity, a light beam will be directed through the sample. The tool is employed in both color measurement and color monitoring.

In a number of spectroscopic experiments, the spectrophotometer is employed to ascertain the peak's wavelength.

Therefore, the correct answer is option  A. Spectrophotometer

C. Blank solution

D. Sample solution

E. Cuvette

F. Stir bar.

To learn more about spectrophotometric experiment refer to:

https://brainly.com/question/24097395

#SPJ4

2m/s^2 is the object’s acceleration.

Describe a force.

A push or pull that an object experiences as a result of interacting with another item is known as a force. Every time two items interact, a force is exerted on each of the objects. The force is no longer felt by the two objects when the interaction ends.

According to Newton's second law of motion, the force is equal to the change in momentum divided by the change in time. Force is equal to the mass times the acceleration for a constant mass.

Force ⇒ m.a

F ⇒ 150N

m ⇒ 75kg

a ⇒?

a ⇒ F/m

  ⇒ 150/75

  ⇒ 2m/s^2

To learn more about force use link below:
https://brainly.com/question/12785175

#SPJ1

The number of grams of potassium sulfate dissolved in 700 mL of a 0.5M is 60.991g.

The mass of a substance can be calculated by multiplying the number of moles in the substance by its molar mass as follows:

mass = no of moles × molar mass

However, the number of moles can be calculated from the molarity as follows:

0.5M = moles ÷ 0.7L

moles of pottasium sulfate = 0.35 moles

Molar mass of pottasium sulfate = 174.259 g/mol

Mass = 174.26 × 0.35 = 60.991g

Learn more about mass at: https://brainly.com/question/13320535

#SPJ1

The ratios are 1:2:1. The ratio of carbon, hydrogen, and oxygen in most carbohydrates is 1:2:1.

This means for every one carbon atom and there are two hydrogen atoms and one oxygen atom. It forms the structure of even the most complex carbohydrates such as starch and glycogen. Carbohydrates are the organic molecules madeup of carbon, hydrogen, and oxygen atoms.

The ratio of these three atoms in carbohydrates is most commonly 1:2:1, meaning for every carbon atom, there are two hydrogen atoms and a oxygen atom. This ratio is the same for both monosaccharides and polysaccharides. Monosaccharides are the simplest carbohydrates and are composed of single sugar molecules, while polysaccharides are larger molecules composed of multiple sugar molecules linked together.

To know more about carbohydrates:

brainly.com/question/20290845

#SPJ4

a. To find the specific heat ratio γ, we can use the adiabatic compression equation:

P₁V₁^γ = P₂V₂^γ

where P is pressure, V is volume, and γ is the specific heat ratio.

We are given that the volume is halved, which means V₂ = (1/2)V₁. We are also given that the pressure increases by a factor of 2.5, which means P₂ = 2.5P₁. Substituting these values into the equation and solving for γ, we get:

P₁V₁^γ = P₂V₂^γ

P₁V₁^γ = 2.5P₁(1/2V₁)^γ

1 = 2.5(1/2)^γ

γ = ln(1.4)/ln(1/2)

γ ≈ 1.88

Therefore, the specific heat ratio γ is approximately 1.88.

b. To find the factor by which the temperature increases, we can use the adiabatic compression equation again, but this time we'll use the relationship between temperature and pressure:

P₁V₁^γ/T₁ = P₂V₂^γ/T₂

where T is temperature.

We know that the pressure increases by a factor of 2.5, which means P₂ = 2.5P₁. We also know that the volume is halved, which means V₂ = (1/2)V₁. Substituting these values into the equation, we get:

P₁V₁^γ/T₁ = 2.5P₁(1/2V₁)^γ/T₂

T₂/T₁ = (2.5/2^γ)

T₂/T₁ ≈ 1.8

Therefore, the temperature increases by a factor of approximately 1.8.

To learn more about adiabatic compression refer to:

brainly.com/question/6334891

#SPJ4

Answer:

normal

Explanation:

Step-by-step Explanation:

a. [tex]CaCO_{3}[/tex] → [tex]CaO[/tex] + [tex]CO_{2}[/tex]

This is the balanced chemical equation for the combustion of Calcium carbonate.

b. Properties of [tex]CaCO_{3}[/tex] :

   Properties of [tex]CaO[/tex] :

   Properties of [tex]CO_{2}[/tex] :

c. According the above equation, number of atoms on both sides are equal.

Before reaction: Ca = 1, C = 1, O = 3

After reaction: Ca = 1, C = 1, O = 1 + 2 = 3

d. The law of conservation of matter states that the total mass and kind of elements in the reactants is equal to the total mass and kind of elements in the products. Thus matter cannot be created not destroyed, it can only be conserved. From the chemical equation, we get to know that the mass and number of atoms of all the elements is equal in the reactants and products. Thus we can prove the conservation of matter.

e. Combustion of Sodium Carbonate:

[tex]Na_{2} CO_{3}[/tex] → [tex]Na_{2}O + CO_{2}[/tex]

In this reaction, sodium carbonate undergoes combustion at temperature > 500°C and forms sodium oxide and carbon dioxide.

f. The following results are achieved when a chemical reaction occurs:

Water and calcium oxide react quickly to form calcium hydroxide. A significant amount of heat is also released during this process, raising the system's temperature. This demonstrates that there was a chemical reaction.

Calcium carbonate breaks down into calcium oxide and carbon dioxide when heated. Here, the evolution of gas (carbon dioxide) proves that a chemical reaction has occurred.

Salt water is heterogeneous because it contains two or more distinct phases that can be seen with the eye.

Salt water is a mixture of water and salt, which are two distinct phases that do not blend evenly. The salt in salt water is in the form of ions, which are evenly distributed throughout the water. However, these ions do not dissolve completely, and they can form a separate layer of solid salt at the bottom of the container.

This layer can be easily seen with the eye, demonstrating that the salt water is not uniform throughout. Additionally, if the salt water is heated, it will undergo a phase change and evaporate, leaving behind a residue of solid salt, which again shows that the salt water is a heterogeneous mixture.

To know more about the Salt, here

brainly.com/question/5306491

#SPJ4

According to the Gibbs free energy equation (ΔG = ΔH - TΔS), the spontaneity of a reaction is determined by the sign and magnitude of the enthalpy change (ΔH) and the entropy change (ΔS).

If ΔH is negative (exothermic) and ΔS is positive (increase in disorder), the reaction will be spontaneous at all temperatures. This indicates that the products are more energetically stable than the reactants.

If ΔH is positive (endothermic) and ΔS is negative (decrease in disorder), the reaction will be non-spontaneous at all temperatures. This indicates that the products are less energetically stable than the reactants.

If ΔH is positive and ΔS is positive, the reaction will be spontaneous only at high temperatures. This indicates that the products are less energetically stable than the reactants, but the increase in entropy at high temperatures can drive the reaction forward.

If ΔH is negative and ΔS is negative, the reaction will be spontaneous only at low temperatures. This indicates that the products are more energetically stable than the reactants, but the decrease in entropy at low temperatures can drive the reaction forward.

To learn more about rate of reaction  refer to:

brainly.com/question/30546888

#SPJ4

2.40 ×10²⁴ molecules are there in 4.00 moles of glucose, C₆H₁₂O₆. A molecule is a collection of at least two atoms.

According on the context, the word can or cannot encompass ions that meet this requirement. A molecule is a collection of at least two atoms bound together by the attractive forces called as chemical bonds.

When speaking of polyatomic ions, the difference between them and ions is frequently ignored in the fields of quantum theory, organic chemistry, especially biochemistry.

number of molecule = number of moles ×  6.022×10²³

                                  = 4×  6.022×10²³

                                 = 2.40 ×10²⁴ molecules

Therefore, 2.40 ×10²⁴ molecules are there in 4.00 moles of glucose, C₆H₁₂O₆.

To know more about molecule, here:

https://brainly.com/question/29254782

#SPJ1

We can use the formula for density to calculate the mass of the object:

Density = Mass / Volume

Rearranging the formula, we get:

Mass = Density x Volume

Substituting the given values of density and volume, we get:

Mass = 657 g/mL x 32 mL = 21,024 g

Therefore, the mass of the object is 21,024 g or 21.024 kg (rounded to three decimal places).

To maintain the quality of beer, it is important to maintain consistent calcium and pH levels. So the statement is true.

Calcium is important for yeast health and contributes to the beer's flavor and texture.

while pH affects yeast activity and can impact the stability and flavor of the beer. If the levels of calcium and pH fluctuate too much, it can lead to issues with fermentation and negatively affect the quality of the beer.

Maintaining consistent levels of calcium and pH in beer can also impact the clarity and stability of the final product.

Therefore, consistent levels of calcium and pH are crucial in maintaining the quality of beer.

To learn more about fermentation:

https://brainly.com/question/11554005

#SPJ4

The two rings with approximately the same bond angle in their favored conformations are a) cyclopropane and c) cyclohexane.

Both rings have a bond angle of approximately 120 degrees, which allows them to be in their most stable conformation. In cyclopropane, the three carbon atoms are arranged in a planar triangle, with each bond angle being approximately 120 degrees.

In cyclohexane, the six carbon atoms are arranged in a regular hexagon, with each bond angle being approximately 120 degrees. The bond angles in both of these rings are approximately the same because both rings are planar, allowing them to form their most stable conformations.

For more questions like Bond angle click the link below:

https://brainly.com/question/13751116

#SPJ4

Answer:

The answer is 1050

:

Partial pressure of nitrogen in the mixture is calculated as 1050 kPa.

The pressure exerted by a (specified) component in a mixture of gases is called partial pressure.

The reaction N2(g) + 3H2(g) -> 2NH3(g) shows that one molecule of nitrogen reacts with three molecules of hydrogen to produce two molecules of ammonia. This means that the ratio of moles of nitrogen to moles of hydrogen in the reaction is 1:3.

X(N2) = (moles of N2) / (total moles of gas)

As the ratio of moles of nitrogen to moles of hydrogen in the reaction is 1:3, we can use the mole fraction of nitrogen to determine the mole fraction of hydrogen:

X(H2) = 3 * X(N2)

moles of gas = (total pressure) / (gas constant * temperature)

where gas constant = 8.31 J/mol*K and temperature is in kelvin.

moles of N2 = X(N2) * moles of gas

so, partial pressure of N2 = X(N2) * total pressure

X(N2) = moles of N2 / moles of gas = 1 / (1 + 3) = 0.25

X(H2) = 3 * X(N2) = 0.75

moles of gas = (4200 kPa) / (8.31 J/mol*K * 298 K) = 1.789 mol

moles of N2 = X(N2) * moles of gas = 0.25 * 1.789 mol = 0.447 mol

partial pressure of N2 = X(N2) * total pressure = 0.25 * 4200 kPa = 1050 kPa

Therefore, the partial pressure of nitrogen in the mixture is 1050 kPa.

To know more about partial pressure, refer

https://brainly.com/question/19813237

#SPJ1

A disaccharide called sucrose is made up of glucose connected to fructose, not galactose.

Two monosaccharide units are joined by glycosidic linkages in either the or orientation to form disaccharides. Succrose, lactose, and maltose are the three most significant ones. The most prevalent sugar is sucrose, which is composed of a molecule of α-glucose and β-fructose bonded together.

A glycosidic bond connects the two monosaccharide units that make up a disaccharide. The O-glycosidic linkages, which link the oxygen from a hydroxyl group to the carbonyl carbon, are the most typical glycosidic connections joining monosaccharide units.

The disaccharide sucrose is created through the condensation process between glucose and fructose. One type of disaccharide exists sucrose, also referred to as table sugar. Two monosaccharides are joined to create a disaccharide, which is a type of carbohydrate. Maltose and lactose are two other typical disaccharides.

To learn more about disaccharide refer to:

https://brainly.com/question/12921453

#SPJ4

Ionic bonds themselves do not have shapes, as they involve the electrostatic attraction between positively and negatively charged ions.

Ionic bonds are a type of chemical bond that involves the transfer of electrons between atoms. Ionic bonds occur when one atom, typically a metal, loses one or more electrons and another atom, typically a nonmetal, gains those electrons. This transfer of electrons results in the formation of positively charged cations and negatively charged anions, which then attract each other through electrostatic forces to form an ionic compound. Ionic bonds tend to be strong and stable, and ionic compounds typically have high melting and boiling points due to the strong attraction between the positively and negatively charged ions. They also tend to be brittle and hard, and often form crystalline structures. Examples of common ionic compounds include table salt (sodium chloride), magnesium oxide, and calcium carbonate.

Here,

However, when ionic compounds are formed, they can take on different shapes depending on the arrangement of the ions in the crystal lattice. The crystal lattice structure of an ionic compound is determined by the relative sizes and charges of the ions involved, as well as by the conditions under which the compound was formed (e.g., temperature, pressure, and other environmental factors).

For example, sodium chloride (NaCl) has a crystal lattice structure that forms a cubic shape, while calcium fluoride (CaF2) has a crystal lattice structure that forms a more complex, cubic shape with additional voids in the lattice. In general, ionic compounds tend to have relatively high melting and boiling points, as well as a tendency to form brittle, crystalline solids.

To know more about ionic bonds,

https://brainly.com/question/11527546

#SPJ1

The purpose of using acetone in this experiment is to extract the lipids from a sample. To correctly use acetone, you would need to mix the sample with a small amount of acetone and an equal volume of water.

After mixing, the lipids can be separated from the rest of the sample by centrifugation. The separated lipids can then be collected and analyzed.

The purpose of using acetone in the experiment and provides a detailed description of how to use it correctly to achieve the desired goal. The answer also provides an explanation of how the lipids can be separated from the rest of the sample and how they can then be analyzed.

Learn more about acetone at: https://brainly.com/question/26510453

#SPJ4

The first diagram shows pure elements and the second diagram shows molecules. The third one is compounds and the fourth one is mixtures. Except mixtures, all are pure substances in their pure form.

Compounds are the combination of two or atoms of  different elements. They are of different types, like ionic compounds, covalent compounds, coordination compounds etc.

Here, elements and molecules only contains the same thing itself and they are pure substances. Similarly compounds with out the presence of addition substance are pure substances.

Mixtures are combinations of two or more individual substances or the mix of two or more pure substances. The third diagram represents a mixture of different compounds.

Find more on compounds:

https://brainly.com/question/19458442

#SPJ9

The image related to this question is given below:

Answer:

Possibly molar.

Explanation:

It depends on the context in which it is used.  If it appears as 1.52m, it likely means 1.52 Molar, or 1.52M.  Molar is defined as moles/liter.  It is usually capitalized, but I've increasingly seen it appearing as a small "m."  The letter "n" typically means actual moles of a substance.  If the letter m appears as part of an equation, it should be defined at that point, or in the previous paragraphs.