In a lithium-iodine cell, 2 atoms of Li are oxidized to 2 Li+ ions and l2 is reduced to 2 write the oxidation and reduction half-reactions that take place in this cell

Answers

Answer 1

In a lithium-iodine cell, the oxidation half-reaction involves the oxidation of 2 lithium atoms (Li) to form 2 lithium ions (Li+), while the reduction half-reaction involves the reduction of iodine (I2) to form 2 iodide ions (I-).

In the lithium-iodine cell, the lithium metal acts as the anode, where oxidation occurs, while iodine acts as the cathode, where reduction takes place.

The oxidation half-reaction involves the loss of electrons by lithium atoms, leading to the formation of lithium ions. The balanced oxidation half-reaction is as follows:

2Li -> 2Li+ + 2e-

On the other hand, the reduction half-reaction involves the gain of electrons by iodine molecules, resulting in the formation of iodide ions. The balanced reduction half-reaction is as follows:

I2 + 2e- -> 2I-

Overall, when the two half-reactions are combined, the electrons cancel out, and the lithium ions and iodide ions combine to form lithium iodide (LiI):

2Li + I2 -> 2LiI

In the lithium-iodine cell, these oxidation and reduction half-reactions occur simultaneously, facilitating the flow of electrons and the generation of electrical energy.

Learn more about oxidation half-reaction here:

https://brainly.com/question/13977994

#SPJ11


Related Questions

What category of organisms makes up the largest percent of the the fossils discovered? A. Land animals B. Marine animals C. Microorganisms

Answers

Answer:

Marine animals

Explanation:

A fossil is any remains of ancient life. Fossils can be body fossils, which are remains of the organism itself or trace fossils, such as burrows, tracks, or other evidence of activity(Lumen Learning).

Fossils of land animals are less common because they may not have been buried. However, land organisms may become buried underneath by mudslides or ash from a volcanic eruption, or covered by sand in a sandstorm.

Marine fossils are more common owing to quick burial. Marine animals that die near a river delta may be buried by sediment carried by the river. A storm at sea may shift sediment on the ocean floor, covering and helping to preserve skeletal remains(Lumen Learning).

Can someone please explain to me what a Ecologist does for a living? (Or daily in their career?)

Answers

ecologists look at relationships between nature, studying the interactions between humans, animal and plants.

Answer:

Ecologists focus on the relationship of organisms within their environment. Ecology is a branch of biology (biology is the study of life). Given the broad scope of ecology, there are multiple sub-disciplines that an ecologist can choose to focus on. Since all living things (plants, animals, microbes) depend on other living things and a healthy environment to survive, ecologists may specialize in one aspect of an ecosystem. Examples include terrestrial (land), aquatic (water), applied (concepts and principles of ecology), conversation (management of biodiversity), and evolutionary (evolution).

Explanation:

Brainliest plz

A 4 feet tall student went summing pool. He saw depth of water in pool less than 4 feet.Will he drowned.Write reason

Answers

Answer:

Question says , the height of the student = 4 feet, ... This means, if the student goes for swimming in the pool, however he does not know swimming, he will not be drowned until he is suffering from an injury or external force.

It depends if the water is less then where his face is, if it’s below his face then no, if it’s above... then probably.

Please help


according to the ____ rule, elements tend to react until they have the same electron configuration as a _____. _____, found on the left of the _____, tend to lose electrons and from ____. _____ tend gain electrons to form _____.

Answers

Answer:

What chapter is this and what grade are you, i can check this for you

Explanation:

how much empty space was there in the medium-sized rock sample​

Answers

Answer:

I'm assuming this is from a lab that you did - in which case, I can't really help you out here.

Explanation:

Nah I’m going to have to say that it is 27

A chemical reaction that is expected to form 325.0 gof product only forms 123.8 g of product. What is the percent yield of this reaction?
38.1%
61.9%
201.2%
262.5%

Answers

Answer:

[tex]\boxed {\boxed {\sf A. \ 38.1 \%}}[/tex]

Explanation:

Percent yield is the ratio of the amount actually produced to how much could theoretically be produced. It is found using this formula:

[tex]\% \ yield = \frac{actual \ yield}{theoretical \ yield} *100[/tex]

For this reaction, the theoretical or expected yield is 325.0 grams. The actual yield is 123.8 grams.

[tex]\% \ yield = \frac{ 123.8 \ g }{325.0 \ g }*100[/tex]

Divide.

[tex]\% \ yield = 0.380923077 *100[/tex]

[tex]\% \ yield = 38.0923077[/tex]

Round to the nearest hundredth. The 9 in the hundredth place tells us to round the 0 to a 1 .

[tex]\% \ yield \approx 38.1[/tex]

The percent yield is about 38.1%

Answer:

38.1%

Explanation:

Use the following chemical equation to answer the question. 4K(s) + O2(g) → 2 K2O(s). If a staff member at a laboratory has 12.0 grams of potassium metal, what is the theoretical yield of potassium oxide that the scientist could potentially produce from the reaction with oxygen gas?
A) 9.96 grams of K2O
B) 14.5 grams of K2O
C) 28.9 grams of K2O
D) 57.8 grams of K2O

Answers

Answer:14.5 grams of K2O

Explanation:

4K(s) + O2(g) → 2 K2O(s). If a staff member at a laboratory has 12.0 grams of potassium metal,  14.5 grams of K2O is the theoretical yield of potassium oxide that the scientist could potentially produce from the reaction with oxygen gas. Therefore, option B is correct.

What is theoretical yield ?

The yield of a reaction is used to represent how much of a product is produced from that reaction. The theoretical yield is the quantity of product that stoichiometry predicts will be produced, whereas the actual yield is the amount that is actually produced.

Divide the ratio by the limiting reactant's molecular weight. The answer is the theoretical yield of the desired product in moles.

It is useful to know how much product will be created with specific reactant amounts before carrying out chemical reactions. The theoretical yield is what is meant by this. This method can be applied to determine the theoretical yield of a chemical reaction.

Thus, option B is correct.

To learn more about theoretical yield, follow the link;

https://brainly.com/question/175584

#SPJ2

Is it okay if you help me? I'm kind of in a tight spot here. Tysmmmmmmmmmmmmm o(❁´◡`❁)o!!

Answers

Answer:

Not sure, but I think ot is chemical bonds because chemical potential energy are stored energy in a chemical bond. Hope this helps, thank you !!

paano mag ka jowa? any suggestions?​

Answers

Well just wait for the right time to come, Because if you wait for the right time, you're gonna find someone who you really want- I'm bad at understanding tagalog

Answer:

Time will come

Explanation:

God has a plan for you

What is the acceleration due to gravity at Earth's surface?​

Answers

Answer:

9.8 m/s2

Explanation:

That is to say, the acceleration of gravity on the surface of the earth at sea level is 9.8 m/s2.

Dababy without a doubt

Why is red tide dangerous to ocean animals?

Answers

Answer:

Karenia brevis produces toxins called brevetoxins that affect a variety of marine wildlife. Aquatic organisms can be exposed to brevetoxins in several ways: coming into contact with K. brevis cells or toxins in the water, ingesting cells, inhaling toxins and consuming toxic prey.

Explanation:

What is the boiling point for butane?

Answers

Answer:

30.2°F

Explanation:

Butane, the liquid that can be seen inside a transparent lighter, boils at a temperature slightly under the point at which water freezes. So why doesn't the butane in the lighter boil? Butane does indeed boil at about a degree below 32 degrees Fahrenheit, but this is true only at normal atmospheric pressure. (:

Which of the following is a limitation of using a model to study a natural event?
A.
The results of a model event are often much more accurate than those of the actual event.
B.
The model and the results it generates will have no relation at all to the actual event.
C.
The size and design of the model will be too similar to the actual event.
D.
The results of a model event may not be similar enough to the results of the actual event.

Answers

Answer:

D

Explanation:

why i say that is because take for example a volcano, when you make a model, you'll see what takes place in a real eruption but in real life the lava would burn things in its path, the model volcano may not. That's just an example

Answer:

D

Explanation:

I got it right on study island

Increasing an airplane's speed or wing size does which of the following? O A. Creates a sonic boom B. Generates more lifting force O C. Increases the gravitational pull on the plane D. Decreases the amount of drag acting on the plane SUBMIT​

Answers

Answer: B: generates more lifting force.... just got it correct

Explanation:

Answer:

B. Generates more lifting force

Explanation:

i took the quiz on Ap*x and it was correct

How many electrons are needed in the outer energy levels of most atoms to be chemically stable?​

Answers

Answer:

8 electrons

Explanation:

If you tested two samples of a particular pure substance, what would you find?

Answers

Answer:

The properties of a pure substance can be used to determine whether a sample is a pure substance or mixture because the characteristic properties of matter can be used to identify a sample. The result is a mixture called a composite.

Explanation:

Pure substances contains their own molecules only and not any  impurity. Thus, when we tested it  only shows the properties of its own.

What are pure substances?

Pure substances are substances containing its pure composition without any impurities. For example water, fruits, acids etc. are pure substances and they does not have a combination other substances.

Mixtures are the combination of two or more pure substances, and the can be heterogenous or homogenous. Whereas, pure substances homogenous only thus forming only one phase.

When we tested mixtures qualitatively, they shows the properties of each  individual components in it. Whereas, pure substances give inly its own characteristics.

To find more on pure substances, refer here:

https://brainly.com/question/24462192

#SPJ2

BRAINLIST!!

Water often has dissolved gases and other chemicals in it. When this water encounters rocks, the minerals in the rocks can be changed by the process of

A.
deposition
B.
erosion
C.
sedimentary mineralization
D.
chemical weathering.

Answers

B erosion is the answer
Answer is B erosion!!!!

what is an accurate description of a period in the periodic table

Answers

Answer:

The periods of the periodic table are the horizontal rows.

Explanation:

Answer:

period is a horizontal row of the periodic table

Explanation:

A period in the periodic table is a row of chemical elements. All elements in a row have the same number of electron shells. Each next element in a period has one more proton and is less metallic than its predecessor

Feel free o copy and paste

In the lab, you are given a metal ball. You measure the mass of the ball to be 28 g. You place the ball in a graduated cylinder and the water level increases from 28.2 mL to 31.4 mL. What is the density of the metal ball? (round you answer to the nearest hundredth)

Answers

Answer:

Density = 8.75ml

Explanation:

Density = Mass / Volume

In this problem ...

Mass = 28 grams

Volume = 31.4ml - 28.2ml = 32ml (water displacement also)

∴Density = mass /volume = 28g/32ml = 8.75g/ml

Is it okay if you help me? I'm kind of in a tight spot here. Tysmmmmmmmmmmmmm o(❁´◡`❁)o!!

Answers

Answer:

C. Remains constant

Explanation:

Hope this helps (:

C! Remains Constant

Plants cells also gain energy through cellular respiration.

True or false?

Answers

True ................

Answer:

true

Explanation:

what conversion factor is needed to calculate the number of atoms in 8.6 moles of Aluminum?

A. 1 mole/ 6.02x10^23 atmos
B. 6.02X10^23 atoms/ 1 mole
C. 1 mole/ 26.98zg
D. 26.982g/ 1 mole

Answers

Answer:hey did you ever get an answer? I need it for this exam

Explanation:

i need help writing a LAB REPORT about NATURAL SELECTION

(plus i don’t know what exact subject it is so i’m sorry if it’s the wrong subject)

Answers

Answer:

Translate from Ukrainian.

У цей приклад я візьму селекції пшениці. Коли ми будемо говорити про селекцію цього злака, то ми можемо отримати меньшу собівартість, та вартість вирощування. Збільшена урожайність, та менша потреба в гербіцидах, пестицидах, та інсектицидах це теж наслідок. Тому селекція це майбутнє!

Write the word and balanced chemical equations for the reaction between:
Aluminum + iron sulfate

Answers

Explanation:

Aluminium - Al

Iron Sulfate - FeSO4

The reaction is given as;

Al + FeSO₄ -->  Al₂ (SO₄) ₃ + Fe

The balanced equation is given as;

2 Al + 3 FeSO₄ -->  Al₂ (SO₄) ₃ + 3 Fe

In words it is given as;

Aluminium + Iron Sulfate --> Aluminium Sulfate + Iron

Describe what happens when a. piece of potassium is dropped into a trough of water coloured with red litmus.
Pls help,it's urgent!!!​

Answers

Answer:

Explanation:

Identify the type of intermolecular force for water, vegetable oil, and corn syrup.

Answers

Answer:

Intermolecular force for oil the dipole-dipole.

Intermolecular force for water hydrogen bonds.

Intermolecular force for vegetable oil nonpolar compound.

Intermolecular force for corn syrup fructose.  

Imran did an experiment to see how changing the
surface area of limestone affected the rate at which
it reacts with hydrochloric acid. He timed how long it
took for the reaction to produce 50 cm3 of carbon
dioxide gas. His results are shownin the picture

a) Explain why changing the surface area has the
effect that it does.

b) What must Imran have done to make this
experiment a fair test?

c) Write a word equation for this reaction (limestone
is calcium carbonate).​

Answers

whatm iş your name msmsjwjnsnwjq

Two students conduct the same experiment, but they get different results. What should the students do next?A.The students should check their procedure and tools for sources of error. B.Both students should throw out their data and start over. C.The students should compare data with other students and then use the data from the student who was closest to the rest of the class. D.The students should find the average of each data set and each report the average data.

Answers

Answer:

A.The students should check their procedure and tools for sources of error.

Explanation:

Answer:

I think it A

Explanation:


Which of the following compounds
does not contain a polar Covalent bond
A) CH2 CH₂ CH₂OH
B) ozone
C)CH₂ CH (NH₂) CH₂ CH2
D) CH4 CH₂ CH₂ Ch
H2 li​

Answers

Answer:

the correct answer is letter B

What type of heat transfer causes the water in the bottom of the pool to be cooler and the water at the top to be warm?

Answers

Answer:

i think its convection

Explanation:

Other Questions
state_diagram : process(clk, reset) begin if reset = '1' then y the major reason for the juvenile court's ________ is that it has traditionally focused not on the act committed by the juvenile, but on the whole child. pick all appropriate answers that make the statement true. the series [infinity] (2n)! (n!)2 n=0 For the following sequential circuit: Assume that new values of the inputs X and Y become available on the trailing edge of the clock. Assume the D Flip-Flops are trailing edge triggered. Assume all D Flip-Flops are initialized to 0. Assume the OR gate has a propagation delay of 1.5ns, the AND gates a delay of 2.0ns, and the inverters have a delay of 1.0ns. Assume the set-up time for each of the D Flip-Flops (Tsetup) is 1.0 ns Assume the propagation delay for the D Flip-Flops (Clk Q ) is 0.75 ns Assume that OUT2 needs to be in a stable state before the trailing edge of a clock cycle Find an expression for the next state of the output OUT1* in terms the inputs A and B and the present states of the outputs OUT1 and OUT2 Find an expression for the next state of the output OUT2* in terms the inputs A and B and the present states of the outputs OUT1 and OUT2 Complete the state table for this circuit. What is the maximum logic delay (Tlogic) in this circuit? Under what conditions does this maximum logic delay occur? What is the minimum clock period that this circuit can tolerate without risking an incorrect or metastable state? What is the maximum clock frequency that this circuit can tolerate without risking an incorrect or metastable state? What is the maximum hold time associated with D Flip-Flop to guarantee that the circuit does not enter into an incorrect or metastable state? 8. What is the 2-part naming system used to givean organism its scientific name?a. Binomial Naming Systemb. Dinomial Naming Systemc. Binomial Nomenclature when a process requests pages, linux loads them into memory. when the kernel needs the memory space, the pages are released using a most recently used (mru) algorithm. T/F the yoga sage patanjali is believed to have assembled a collection of yoga theories and practices known as the 8 yoga ____. Fit a quadratic polynomial to the data points (0,27), (1,0),(2,0),(3,0), using least squares. Sketch the solution. Light falls on a pair of slits 0.00177 cm apart.The slits are 88.5 cm from the screen.Thefirst-order bright line is 1.76 cm from thecentral bright line.What is the wavelength of the light you can chew through very tough objects with your incisors because they exert a large force on the small area of a pointed tooth. what pressure in pa can you create by exerting a force of 390 n with your tooth on an area of 1.14 mm2? T/F: global competition has put more power in the hands of the seller. Theorem: For any real number x, if 0 < x 0 Which facts are assumed and which facts are proven in a proof by contrapositive of the theorem? (a) Assumed: 0 < x and x < 3 Proven: 15 - 8x + x2 > 0 (b) Assumed: 0 < x or x 0 (c) Assumed: 15 - 8x + x2 < 0 Proven: 0 < x and x > 3 (d) Assumed: 15 - 8x + x2 < 0 Proven: x < 0 or x > 3 which of the following is not equivalent to 1 atm pressure? a. 101.325 kpa b. 760 mm hg c. 10 cm hg d. 14.7 psi e. 760 torr t/f the basis of mary wigmans choreography was to create geometric designs to delight the visual senses of her audience. A uniform rod AB of mass m and length l is at rest on a smooth horizontal surface. An impulse J is applied to the end B, perpendicular to the rod in the horizontal direction. Find the speed of particle P at a distance 1/6 from the centre towards A of the rod after time t = ml/12J. Study the following reference for a journal article. Is anything incorrect? Identify the correction for the error or select correct from the options below. Yoeman, B. (2011, September October). Facing the future. Audubon. Pages 64- 69 O pp. 64-69. O pages 64-69. O 64-69 O 64-69. O The reference is correct. commercial impracticability means some event has occurred that neither party anticipated and fulfilling the contract would now be extraordinarily difficult and unfair to one party. T/F The distance from Mesquite to Houston is 245 miles. There are approximately 8 kilometers in 5 miles. Which measurement is closest to the number of kilometers between these two towns? rom textbooks on the pl/i and ada programming languages, look up the respective sets of built-in exceptions. do a comparative evaluation of the two, considering both completeness and flexibility. the outcome of good object relations in infancy is the emergence of _____