In a dry desert environment, the climate will typically show wide temperature swings on a daily basis, from very cold to very hot. Florida
typically has much smaller temperature swings. What causes that difference?
O a
O b
C
Od
The water surrounding Florida
The lower altitude of Florida
Increased sunshine in Florida
The shorter daylight period in the desert

The warmer air rises and acts as a lid, trapping the colder air near the ground. The air layer closest to the ground becomes more and more polluted as a result of pollution, including that from traffic, being trapped. This continues until the current meteorological conditions change.

What is temperature ?

Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).

What is pollution ?

The release of dangerous substances into the environment is referred to as pollution. Pollutants are these dangerous materials. Natural substances like volcanic ash are examples of pollutants. They may also be the result of human activity, such as the production of factory runoff or waste.

In a temperature inversion, the warmer air serves as a lid, keeping pollutants close to the ground and preventing them from dispersing until the weather changes. The chemicals consequently pose a significant threat to human health by reacting with one another to create other pollutants like ground-level ozone.

Therefore, Temperature inversions work to trap pollution is mentioned above.

Learn more about temperature from the given link.

https://brainly.com/question/11406067

#SPJ4

Along a string, a sinusoidal axial wave is moving in the opposite direction of the x-axis.

A wave is an energetic perturbation in a material that doesn't include any net particle motion. Elastic deformation, a change in pressure, an electric or magnetic strength, an electric potential, or a change in temperature are a few examples. a disruption or variation that causes energy to be transferred gradually from one point to another in a medium; it can be a different from place to place or a change in pressure, external electromagnetic strength, electrostatic force, or temperature.

The pressure of soil against a wall; the application of force to a surface by an item, liquid, or., in contact with it. Physics. power.

To know more about wave visits :

https://brainly.com/question/25954805

#SPJ4

Because the moon's orbit is tilted, we do not see eclipses every month.

Total solar eclipses happen when the moon crosses between the sun and Earth and casts its shadow onto our planet, but Earth doesn't experience a total solar eclipse every month.

Exploratorium Senior Scientist Paul Doherty explains why not—the orbit of the moon is tilted relative to the orbit of the Earth around the sun, so the moon often passes below or above Earth.

At those times, it does not cross the line between the sun and the Earth, and therefore does not create a solar eclipse. There are just two times a year in the Earth's orbit when there is a possibility of a total solar eclipse.

To know more about the eclipses, here

brainly.com/question/4279342

#SPJ4

All the statements are true regarding a conductor in electrostatic equilibrium.

The correct answer: A, B and C.

In addition to the three statements that are true regarding a conductor in electrostatic equilibrium, there are a few other important facts to consider when dealing with electric fields. In an electrostatic field, the electric field lines are always perpendicular to the surface of the conductor. This means that any unbalanced charge on a conductor's surface must produce an electric field that is also perpendicular to the surface.

Learn more about electrostatic equilibrium:

https://brainly.com/question/21499127

#SPJ4

When cold air and warm are added to the same container then the warm air will get colder and cold air will get warmer.

The warm air molecules have more kinetic energy than the cold air molecules when the two air masses are blended. As a result, the warm air molecules attack the cold air molecules and transmit some of their kinetic energy. Up until balance is established, the warm air will get colder and the cold air will get warmer.

Two systems are considered to be in thermal equilibrium with one another when they are in contact with one another and there is no energy movement between them. Thermal equilibrium, said simply, denotes that both systems are at the same temperature. Our daily lives are so reliant on the idea of thermal homeostasis.

Learn more about warm air

brainly.com/question/11823314

#SPJ4

On increasing the mass of the yellow stone,in vertical direction balls center move away from each other and collision probability between the two balls will decrease and final velocity of yellow ball will also decrease.

A Collision happens when a strong power strikes on at least two bodies in a generally brief timeframe. Collision is a one-time event. Because of the crash, the elaborate particles' energy and force change. The crash might happen because of real actual contact between the taking part bodies, like an impact between two billiard balls or a ball and bat. There might be impacts where there is no immediate actual touch, for example, an alpha molecule slamming into a core.

Two dimensional collision(vertical collision)

The accompanying cases might emerge in the event of versatile crash between two bodies :

(1) Two-layered Versatile Crash in Research center Reference Casing

(2) Versatile crash with boundless masses in two aspects

To know more about collision,visit here:

https://brainly.com/question/13138178

#SPJ4

The star in the observable cosmos is about equal to: A) The amount of sand grains on all of Earth's beaches

What sort of things are stars?

A star is formed in an enormous gas cloud. The sky's temperature is too moderate for the creation of molecules. The Delta haze groups in the Orion galaxy are stars in this stage of development. 2. Protostar When gas particles hit in the solar nebula, heat energy is produced.

The Sun is a star, but why?

The energy and light provided by the sun, which is actually a star, are essential in maintaining all life on earth. Nuclear fusion events that take place inside stars are what give them their light. A byproduct of this process, which turns hydrogen into helium, is energy. This energy is what manifests as light for humans.

To know more about star visit:

https://brainly.com/question/30054460

#SPJ4

Passenger car requires 21.23 horsepower to travel at a speed of 50-mi/h on an upgrade of 5% with a smooth pavement, given its weight of 4,500-lb and cross-sectional area of 50 square-feet.

The horsepower developed by the passenger car, we need to calculate the force required to overcome the resistance of the car on the upgrade, and then use that force to calculate the power required in horsepower.

[tex]Force = Weight * Grade + Drag[/tex]

First, we calculate the force required to overcome the resistance of the car on the upgrade:

where:

Weight = 4,500 lb

Grade = 5% = 0.05

Drag = 0.5 * Air Density * Velocity^2 * Coefficient of Drag * Cross-Sectional Area

[tex]Drag = 0.5 * Air Density * Velocity^2 * Coefficient of Drag * Cross-Sectional Area[/tex]

[tex]Air Density =[/tex][tex]0.075 lb/ft^3[/tex]

[tex]Velocity = 50 mph[/tex]

[tex]Coefficient of Drag = 0.35[/tex]

[tex]Drag =[/tex][tex]0.5 * 0.075 * (50/3600)^2 * 0.35 * 50 = 8.53 lb[/tex]

[tex]Force = 4,500 * 0.05 + 8.53 = 233.53 lb[/tex]

Next, we calculate the power required in horsepower:

[tex]Power (HP) = Force * Velocity / 550[/tex]

[tex]Velocity = 50 mph[/tex]

[tex]Power (HP) = 233.53 * 50 / 550 = 21.23 HP[/tex]

To know more about Cross Sectional area, here https://brainly.com/question/20532494

#SPJ4

In order to locate intruders hiding behind the gate, we propose a device that employs infrared sensors and an alert system.

The camera that will be attached to our device will be on a long telescopic pole. The camera will be facing the area behind the school gate, so the pole will be placed close to the gate.

The gatekeeper will be able to clearly see any intruders who might be hiding behind the gate because the camera will be connected to a television or monitor. To ensure maximum safety, the camera will also have night vision and motion detection capabilities.

The camera will be connected to a remote control so that the gatekeeper can tilt and pan the camera to get a better view of the area behind the gate. This will make the device easy to use. The gatekeeper will be able to zoom in on any suspects using the zoom feature on the remote control.

Additionally, the device will have an alarm system that will sound if there is any movement in the area behind the gate. A light will also be connected to the alarm system, and when the alarm goes off, it will flash brightly to let the gatekeeper know there are intruders there.

In conclusion, the school will get a comprehensive security system from our device that will help find intruders who hide behind the gate. The device is simple to operate and will give the gatekeeper clear, in-depth pictures of any intruders who might be hiding behind the gate.

Learn more about safety devices:

brainly.com/question/30023530

#SPJ1

The required apparent power when active power and reactive power are specified is calculated to be 5 kva.

Apparent power is the measure of alternating current power that is computed by multiplying rms current by rms voltage. The overall amount of power required to operate a computer, illuminate a lightbulb, and power a production system is known as apparent power.

The power that is actually used for a particular load, or the active power or real power, if all the available power isn't used.

The active power drawn by the electromagnet (P) = 3 kw

The reactive power drawn by the electromagnet (Q) = 4 kvar

The apparent power is given by the equation,
S = √(P² + Q²) = √(3² + 4²) = 5 kva

Cos Ф is the power factor.

It is given by,

Cos Ф = active power/apparent power = 3 kw/5 kva = 0.6

To know more about power:

https://brainly.com/question/29843051

#SPJ4

The acceleration of the car is  1.78 m/s² and the compared percentage with acceleration due to gravity is 18.16%.

To find the acceleration,

Velocity = 10m/s

Radius = 56 m

The formula to find acceleration is,

a = v²/r

By substituting the values,

a = 10²/56

   = 100/56

   = 1.78 m/s²

As a result, the acceleration due to gravity as a percentage is 9.8 m/s².

Percentage required = (1.78 /9.8) x 100

                                   = 18.16%

18.16% is the required percentage.

To learn more about acceleration refer to :

https://brainly.com/question/460763

#SPJ1

To find the mass of the box, we can use the equation for work done by gravity, which is: Work = Force x Distance is 4.64 kg

where Force is the force required to lift the box, and Distance is the distance the  box is lifted.

The force required to lift an object is given by the equation:

Force = Mass x Gravity

where Mass is the mass of the object and Gravity is the acceleration due to gravity (9.8 m/s^2 on the surface of the Earth).

So, we can substitute the Force equation into the Work equation to get:

Work = Mass x Gravity x Distance

Rearranging this equation, we get:

Mass = Work / (Gravity x Distance)

Now, we can substitute the known values into this equation:

Mass = 360 J / (9.8 m/s^2 x 8 m)

Mass = 360 J / 77.6 J/kg

Mass = 4.64 kg

So, the mass of the box is approximately 4.64 kg.

For such more question on work done

https://brainly.com/question/8119756

#SPJ4

When an electron traveling north reaches an area with a consistent electric field facing north, the electron's speed and direction of motion are altered.

A negatively charged subatomic particle known as an electron can either be free or attached to an atom. In the electron cloud, which is located outside of the atomic nucleus, exist electrons.

An electric field that is oriented northward will exert a force on an electron moving northward through it. The electron will accelerate in the field's direction as a result of this force. The strength of the electric field and the charge of the electron will determine how much the acceleration is.

The electron will continue to receive a constant force and move in a straight line with a constant acceleration in a uniform electric field since the electric field's direction is constant. As the electron passes through the electric field, both its velocity and kinetic energy will increase.

To know more about electron, visit:

https://brainly.com/question/1255220

#SPJ4

The potential difference across the resistor was found to be directly proportional to the current flowing through it at a constant temperature, then the resistor would be considered ohmic and would obey Ohm's law.

If the potential difference and current were found to have a non-linear relationship, then the resistor would be non-ohmic and would not obey Ohm's law. If the graph is a straight line passing through the origin, then the resistor is ohmic and obeys Ohm's law. If the graph is not a straight line passing through the origin, then the resistor is non-ohmic and does not obey Ohm's law.

To Know more about Ohm's law, here

https://brainly.com/question/10006666

#SPJ4

In the first phase, you are conflating force and labour. Your supplied quantity is work since work is defined in joules. Given that you are 0.5 meters away from equilibrium,

The joule (unit J) is what?

What is a Joule (unit J) - Definition of an Energy Unit One energy unit. Energy is often thought of as the capacity to produce heat or work. 2 Joules of energy. Joule (unit: J) (unit: J). A derived energy unit is the joule. Three examples of 1 joule of energy. The energy is converted into kinetic of a 1 kilogram object traveling at a speed of 2 m/s

What does one joule of energy mean?

A derivative unit of energy is the joule. It is the amount of energy transmitted to an item when a one newton force is applied to it in the plane of its motion across a one meter distance. 0.239 calories make up 1 joule. 9.48 × 10-4 BTU equals 1 joule. A joule equals 2.778 x 10-7 kWh. Examples of 1 Joule of Energy

To know more about joule visit:

https://brainly.com/question/18596314

#SPJ4

Yes, conductors and equipment are protected from the impacts of potentially damaging by fuses and circuit breakers.

A circuit breaker is a type of electrical safety device used to guard against overcurrent damage to electrical circuits. Its primary purpose is to stop the flow of current in order to safeguard machinery and lower the likelihood of a fire. A circuit breaker can be reset to continue normal operation, in contrast to a fuse, which can only be used once before needing to be replaced.

There are many different sizes of circuit breakers, from tiny devices that protect low-current circuits or specific home appliances to massive switchgear built to safeguard high voltage circuits supplying an entire city.

To know more about the fuses, here

brainly.com/question/24148257

#SPJ4

So, the height to which the ball was thrown is approximately 29.4 meters. To find the height to which the ball was thrown, we need to use the equation for motion under constant acceleration, which is given by:

h = vi * t + (1/2) * a * t^2

where h is the height, vi is the initial velocity (which is the upward velocity with which the ball was thrown), t is the time it took for the ball to reach its highest point, and a is the acceleration due to gravity (-9.8 m/s^2).

Since the ball was thrown upward and then came back down, it reached its highest point after half of the total time, which is 2 seconds. So, we can use 2 seconds for the value of t in the equation.

Next, we can solve for vi using the time it took for the ball to reach its highest point and the acceleration due to gravity:

vi = h / (2 * t) - (1/2) * a * t

Substituting the known values into the equation:

vi = h / (2 * 2) - (1/2) * (-9.8 m/s^2) * 2^2

vi = h / 4 + 9.8 m/s

Now, we can use the value of vi to find the height h:

h = vi * 2 - (1/2) * (-9.8 m/s^2) * 2^2

h = 2 * (h / 4 + 9.8 m/s) - (1/2) * (-9.8 m/s^2) * 2^2

h = 2 * (h / 4 + 9.8 m/s) + 9.8 m

h = (h / 2 + 19.6 m) + 9.8 m

h = h / 2 + 29.4 m

For such more question on acceleration

https://brainly.com/question/460763

#SPJ4

Aristarchus believed that the sun was the center of the universe because he had found that the sun was larger than the earth and other planets and made the conclusion that other planets revolved around the sun.

Aristarchus' hypothesis was that the sun and stars did not move, that the earth revolved around the sun, while the sun remained stationary in the center of the earth's orbit.

In testing his hypothesis, Aristarchus constructed a kind of "sundial" which he probably used to measure the height of the sun and the position of the stars, as well as measure the angles and diameters of the moon as accurately as possible.

As a result, apart from the theory of the sun as the center of the solar system, Aristarchus also discovered that the earth is one of several planets revolving around the sun. Aristarchus used the theory of lunar eclipses to estimate the size of the solar system according to the radius of the earth

Learn more about Aristarchus Theory at: https://brainly.com/question/12689873

#SPJ4

The cup should be placed farther from the ramp in order to accommodate marbles launched at angles above horizontal.

A marble is a tiny, spherical ball or toy made of stone, glass, or ceramic. Marbles are frequently used in games and recreational activities like marbles, where participants shoot or roll the marbles towards a target with their fingers. Marbles come in a variety of shapes, hues, and patterns, and they could be adorned with swirls or other patterns. In the past, marbles have been used for a variety of activities in numerous cultures and civilizations, such as religious rites, art, and commerce items. Today, marbles are mostly used recreationally and may keep individuals of all ages entertained for hours.

Learn more about marbles here:

https://brainly.com/question/11963004

#SPJ4

Early reinforcement reinforces actions that closely resemble the intended behaviour. Later, reinforcement is limited to actions that closely resemble the desired behaviour.

The technique of consecutive approximations is referred to as a "algorithm or algorithmic process" and is used to solve equations of a specific class using a series of simple arithmetic operations.

One of the well-known traditional approaches for solving integral equations is the successive approximations method (SAM). In the literature, it is sometimes referred to as the Picard iteration approach.

In fact, this approach offers a strategy for resolving initial value issues or integral equations. A strategy for modifying operant behaviour that involves rewarding responses that resemble the intended behaviour.

Therefore, stan is using the method of successive approximations.

Learn more about approximations here:

https://brainly.com/question/29669607

#SPJ1

When a falling object reaches terminal velocity, it stops accelerating.

option D.

When a falling object reaches terminal velocity, it means it has reached the maximum speed it can attain while falling due to the drag force (air resistance) acting upon it, which is equal in magnitude to the gravitational force acting upon it.

At terminal velocity, the net force on the object is zero, so its velocity remains constant and it falls at a constant rate. The terminal velocity of an object depends on its mass, size, shape, and the density of the fluid it is falling through.

Learn more about terminal velocity here: https://brainly.com/question/25905661

#SPJ1

Answer: no question is wron

Explanation:

The net electrostatic force exerted on Q by q1 and q2 is

F=9.99 *10^-2

Generally, Point charges are hypothetical charges concentrated at a single point in space. They are used in physics and electrical engineering to simplify the analysis of electrical fields and their interactions.

Point charges are considered to be dimensionless, that is, they have zero size, and they have a magnitude that is either positive or negative, depending on whether the charge is a proton or an electron, respectively. In reality, point charges do not exist, as all charges are distributed over a finite volume, but they are a useful abstraction for certain calculations and simulations.

[tex]& K=\frac{1}{4 \bar{R} \varepsilon} \\\\& =\frac{1}{4 \times 3.142 \times 8-854 \times 10^{-12}} \\\\& =\frac{1}{1-112626454 \times 10^{-10}} \\[/tex]

=8.79 *10^9

[tex]f=\frac{k /q1 / /q2/}{r^2}[/tex]

r=0.30 +0.30

r=0.6

[tex]F=\frac{8.17 \times 10^7 \times\left(2 \times 10^{-6}\right) \times\left(2 \times 10^{-6}\right)}{0.6^2} \\[/tex]

[tex]F=\frac{(8-11 \times 2 \times 2) \times\left(101 \times 10^{-6} \times 10^{-6}\right)}{0.36} \\[/tex]

[tex]& F=\frac{35.96 \times 10^{-3}}{0.36} \\[/tex]

F=9.99 *10^-2

Read more about point charges

https://brainly.com/question/14450910

#SPJ1

Answer:

A) 1.4 × 10^-5 rev/s

Explanation:

We can use Kepler's Third Law of Planetary Motion to solve this problem. Kepler's Third Law states that the square of the period of a planet's orbit is proportional to the cube of its average distance from the star.

T^2 = k * R^3

where T is the period of the orbit and R is the mean distance of the planet from the star. k is a constant of proportionality that depends on the mass of the star.

Let's assume that the frequency of the first planet is f1 and its mean distance from the star is R1. The frequency of the second planet is 2.10 × 10^-5 rev/s and its mean distance from the star is 2R1. We can relate the frequency of the orbit to the period of the orbit as follows:

f = 1/T

Using the first equation, we can find the period of the first planet:

T1^2 = k * R1^3

And the period of the second planet:

T2^2 = k * (2R1)^3

Now, we can substitute these equations into the equation for frequency:

f1 = 1/T1 = 1/sqrt(k * R1^3)

f2 = 1/T2 = 1/sqrt(k * (2R1)^3)

Finally, we can set f1 = 2f2 and solve for f1:

2f2 = 1/sqrt(k * R1^3)

f1 = 1/sqrt(k * R1^3) / 2

So, f1 = 1.4 × 10^-5 rev/s, which is the answer (A).

It is untrue that the day following a total lunar eclipse, one can see the moon in its first quarter phase.

Only a night with a full moon can have a lunar eclipse. However, because Planet's orbit around the sun and the moon's orbit around the earth are not in the same plane, they do not occur every full moon night. Only when the sun, the earth, and the moon align in a straight line can an eclipse occur.

Only under a full moon and when the Moon travels entirely or partially through Earth's shadow can there be a lunar eclipse.

To know more about lunar eclipse visit:-

https://brainly.com/question/30432326

#SPJ4

Gas has a final temperature of 273.6 K and a starting pressure of 177.6 kPa.

R-134a is 1,1,1,2-tetrafluoroethane, as is well known.

Using the ideal gas formula:

PV =nRT PV = w/M RT, where P = gas pressure =? and V = gas volume = 1.115 m3.

T = gas temperature (-30°C) = 273 + (-30) = 243K

R is 8.314 m3 Pa/mole, which is the gas constant. M = molar mass of R-134a gas = 102.03g/mole K = mass of gas = 10 kg = 10,000 g

When you plug in all the values provided, you get the ideal gas equation: P = 1.115m3 = 10000 g/102.03 g/mole 8.314 m3 Pa/mole. 177587.9687 Pa = 177.6 kPa = K 243K P

Consequently, the gas's starting pressure is 177.6 kPa.

We now need to determine the gas's final temperature.

Gay-Law Lussac states that for constant volume and number of moles, the pressure of a gas is precisely proportional to its temperature.

P∝T

P1/T1 = P2/T2

where

P1 is the initial pressure of gas = 177.6 kPa

P2 is the final pressure of gas = 200 kPa

T1 is the initial pressure of gas = ?

T2 is the final pressure of gas =

177.6 kPa/243K = 200 kPa/T2

T2 = 273.6 K

To know about pressure

https://brainly.com/question/12971272

#SPJ4

The downward force exerted by the atmosphere on a football field whose dimensions are 110 m by 49 m is 546×10⁶ N.

The atmospheric pressure or air pressure is the force exerted on a surface by the air above it as gravity pulls it to Earth. Atmospheric pressure is commonly measured with a barometer. The force of buoyancy exerted by the atmosphere on a balloon is B in the upward direction and remains constant. The force of air resistance on the balloon acts opposite to the direction of velocity and is proportional to it. The total downward force exerted by the atmosphere on a football field is found using the atmospheric pressure. So, P atm. A=F. Where A is the area of the football field, A=a⋅b=110 m⋅49m. Finally F=101.3 kPa. 110.49 m² = 546×10⁶ N.

​

For further learning about atmospheric pressure, refer to the link: https://brainly.com/question/25233428

#SPJ4

Important Formulas:

[tex]v=\lambda f[/tex]

velocity(measured in m/s) = wavelength(measured in meters) * frequency(measured in hertz)

__________________________________________________________

Given:

[tex]\lambda=0.03m[/tex] (cm to m)

[tex]v=300,000,000m/s[/tex] (speed of light)

[tex]f=?[/tex]

__________________________________________________________

Rearranging formula for velocity to make frequency the subject:

[tex]v=\lambda f[/tex]

[tex]\dfrac{v}{\lambda} =\dfrac{\lambda f}{\lambda}[/tex]

[tex]f=\dfrac{v}{\lambda}[/tex]

__________________________________________________________

Finding frequency:

[tex]f=\dfrac{v}{\lambda}[/tex]

[tex]f=\dfrac{300,000,000}{0.03}[/tex]

__________________________________________________________

Answer:

[tex]\boxed{f = 1\times10^{10} Hertz}[/tex]

At 23700K would the average velocity of helium atoms equal the escape velocity from (a) the earth.

The mass of a helium atom is

m=6.64×10−27 kg m = 6.64 × 10 − 27 k g.

Given let the average speed of helium atoms equal the escape speed from the Earth.

Thus we have at 23700K the average speed of helium atoms equal the escape speed from the Earth.

What is helium?

To know more about the helium, click the link given below:

https://brainly.com/question/1780577

#SPJ4

(a) The maximum frequency of revolution is 4.0 rad/s.

b (i) The tension in the string is maximum when the object is at the top of its path and minimum when it is at the bottom of its path.

b (ii) The speed of the mass can be found using the minimum tension in the string is 2 m/s.

The maximum frequency of revolution is given by the maximum tension in the string, which is 60 N.

T = mv² / r

where;

The linear speed is given by:

v = 2πrf

where;

f = √T / (mr²))

f = √(60 / (0.60 x 1.20²))

f = 4.0 rad/s

(i) The tension in the string is maximum when the object is at the top of its path and minimum when it is at the bottom of its path. This is because the tension provides the centripetal force that keeps the object moving in a circular path.

(ii) The speed of the mass can be found using the minimum tension in the string, which is 2.1 N:

T = mv² / r = 2.1 N

Rearranging and solving for v, we get:

v = √(Tr / m)

v = √(2.1 x 1.20 / 0.60)

v = 2.0 m/s

Learn more about frequency of revolution here: https://brainly.com/question/28168362

#SPJ1