imagine that you work for grey goose and need to separate the ethanol in vodka from the other main ingredient, water. you load a sample of vodka into the still and let it run. which substance will boil off first? will this substance have been chemically changed when it is collected?

The saturation is 33%, the total unit weight is 107.5 lbs/ft^3, the void ratio is 0.43 and the porosity is 30%.

To calculate the saturation, we need to find the weight of water in the soil, which is 25% of the total weight of 215 lbs. So, the weight of water is 25/100 * 215 lbs = 53.75 lbs.

Next, we find the weight of solids in the soil, which is 215 lbs - 53.75 lbs = 161.25 lbs.

The saturation (S) is the ratio of the weight of water to the weight of solids in the soil and is calculated as follows:

S = 53.75 lbs / 161.25 lbs = 0.33 or 33%.

The total unit weight of the soil can be calculated using the following formula:

γ = (W_water + W_solids) / V

where W_water is the weight of water, W_solids is the weight of solids, and V is the volume of the soil.

Substituting the values, we get

γ = (53.75 lbs + 161.25 lbs) / (2 ft^3) =

= 215 lbs / (2 ft^3) = 107.5 lbs/ft^3

The void ratio (e) is the ratio of the volume of voids in the soil to the volume of solids in the soil, and can be calculated as follows:

e = V_voids / V_solids = (V - V_solids) / V_solids = (V - W_solids / γ_solids) / (W_solids / γ_solids)

Substituting the values, we get

e = (2 ft^3 - 161.25 lbs / 2.7) / (161.25 lbs / 2.7) = 0.43

Finally, the porosity (n) is the ratio of the volume of voids in the soil to the total volume of soil and is given by:

n = V_voids / V = e / (1 + e) = 0.43 / (1 + 0.43) = 0.43 / 1.43 = 0.30 or 30%.

Find out more about Saturation

brainly.com/question/30193270

#SPJ4

In a continuous reactor, the materials are transported as a stream that is always running, allowing the reactants to be continuously supplied into the reactor and producing a stream of product in the process.

Along with that, it ought to be necessary to know the mole counts of unreacted species. The amount of products created from each reactant can be compared in order to determine the limiting reactant.

When producing huge amounts of chemicals, a continuous reactor—also called a flow reactor—is employed.

Therefore, The mole number of the reactant and the finished product should be computed in order to determine the limiting reactant in a chemical reaction.

Learn more about limiting reactant here:

https://brainly.com/question/14225536

#SPJ4

The number of cl- ions are there in 400.5 grams of alcl3 is 9.000 ions.

An atom or molecule with a net electrical charge is known as an ion. Conventionally, the charge of an electron is thought to be negative. This charge is equivalent to and opposite from the charge of a proton.

Lets start by calculating molar mass of AlCl₃

Molecular mass of Aluminium is 27 and that of Chlorine is 35.5

Al = 1 x 27 = 27

Cl = 3 x 35.5 = 106.5

AlCl₃ = 27 + 106.5

AlCl₃ = 133.5

The number of ions of Cl using proportions is

                  133.5 grams of AlCl₃ ------------- 3 ions of Chlorine

                  400.5 grams of AlCl₃ ------------   x

                  x = (400.5 x 3) / 133.5

                  x = 9

Therefore, the number of cl- ions are there in 400.5 grams of alcl3 is 9.000 ions.

Learn more about Number of ions:

https://brainly.com/question/14256158

#SPJ4

The pressure of the fourth gas in atmospheres is1.28 atm.

What does a gas's pressure mean in physics?

The force created when gas particles collide with the wall of their container is known as gas pressure. Force is applied to a region to create pressure. The force that a gas applies to a particular area is known as gas pressure. The amount of force applied to a certain region is referred to as pressure. Gases produce pressure, or force per unit of area. In addition to torr, atmosphere, and bar, the pressure of a gas can also be stated in many additional SI units, such as pascal or kilopascal.

Know more about pressure- brainly.com/question/25736513

#SPJ1

Option A – A triglyceride is a molecule consisting of three fatty acids bonded to a glycerol.

A triglyceride is a type of fat molecule made up of a glycerol molecule and three fatty acid molecules. Triglycerides are the most common type of fat found in food and are also stored in the body as a source of energy. When we eat foods high in fat, the body breaks down the triglycerides into their component fatty acids and glycerol and uses them as fuel. If we eat more fat than we can burn, the body stores the excess as body fat, which can contribute to obesity and other health problems if it accumulates in large amounts. Triglycerides play a role in the development of heart disease and other health problems, and their levels can be measured through a blood test. A high triglyceride level, combined with low levels of "good" cholesterol (HDL), can increase the risk of heart disease, stroke, and other health problems. Maintaining a healthy diet, getting regular exercise, and managing stress can help to keep triglyceride levels in check.

To know more about triglyceride, click here : https://brainly.com/question/15325232

#SPJ4

Number of oxygen atoms in Cr(NO₃)₃ will be 9.

In Cr(NO₃)₃ the number of Cr atoms will be 1 and N atom will be 3. However, oxygen atoms will be 9.

Oxygen is the chemical element having symbol O and its atomic number will be 8. It is a member of the chalcogen group in the periodic table, a highly reactive nonmetal, and an oxidizing agent that can readily forms oxides with most elements as well as with other compounds. Oxygen is the third-most abundant element in the universe after hydrogen and helium. At standard temperature and pressure, the two atoms of the element bind to form dioxygen, a colorless as well as odorless diatomic gas having formula O₂.

To know more about oxygen here

https://brainly.com/question/13905823

#SPJ4

Is the subscript "1" usually understood. Therefore, option C is correct.

A subscript is a character that is printed slightly below and to the side of another character, typically a letter or number. Subscripts are frequently used in chemical equations. A scientist would write the water formula, H2O, with the 2 lower and smaller than the letters on either side.

Subscripts indicate the proportion of atoms of various elements in the compound. Because the molecule contains four hydrogen atoms, the subscript 4 follows the symbol for hydrogen. When a symbol in a formula lacks a subscript, the number 1 is understood.

Thus, option C is correct.

To learn more about the subscript, follow the link;

https://brainly.com/question/16019591

#SPJ1

Potassium iodide is used to avoid the loss of iodine due to oxidation from salts

What are compounds ?

A  compound is a substance consisting of two or more elements chemically combined in a fixed ratio. They differ from mixtures consisting of two or more substances physically mixed without chemical bonding. Compounds have their own physical and chemical properties that differ from those of individual elements. For example, the compound water (H2O) has different properties (boiling point, density, solubility, etc.) than its components hydrogen (H2) and oxygen (O2).

Compounds are formed by chemical reactions in which atoms of different elements combine to form new substances. The formation of a compound can be represented by a chemical formula that indicates the type and number of atoms in the compound.

To know more  about compounds ,  click the link below ;

brainly.com/question/26487468

#SPJ4

If we increase the temperature of the vessel to 450 k at constant volume, 15 atm would be the pressure inside the vessel. Therefore, the correct option is option D.

In chemistry, pressure is the force that a gas or liquid applies to the container's walls. It happens as a result of molecules of a gas or liquid slamming into the surface of the container. One of the gas laws that explains the relationship between pressure and temperature of a gas at constant volume is Gay-Lussac's Law, sometimes referred to as the pressure-temperature law. It has the name of Joseph Louis Gay-Lussac, a French chemist who developed the law at the beginning of the 19th century.

P1/T1 = P2/T2

P2 = (P1 × T2)/T1

P2 = (10 atm ×450 K) / 300 K

P2 = 15 atm

Therefore, the correct option is option D.

To know more about pressure, here:

https://brainly.com/question/30673967

#SPJ12

Your question is incomplete but most probably your full question was,                

We are studying the properties of a 10 L vessel of an ideal gas at 300 K and 10 atm of pressure inside. We can fix the volume or the pressure of the vessel as we like. If we increase the temperature of the vessel to 450 K at constant volume, what would the pressure inside the vessel be?

Group of answer choices

10 atm

5 atm

20 atm

15 atm

Theoretical yield of water is 50.4g. Theoretical yield of a reaction is achievable if the limiting reactant has been identified.

In a chemical reaction, the limiting reactant, also known as the limiting reagent, controls how much product is produced. Calculating the theoretical yield of a reaction is achievable if the limiting reactant has been identified.

Because elements and compounds in an equilibrium chemical equation react in accordance with their mole ratios, there must be a limiting reactant.

2H[tex]_2[/tex] + O[tex]_2[/tex] [tex]\rightarrow[/tex] 2H[tex]_2[/tex]O

moles of H[tex]_2[/tex] = 11 gram/ 2=5.5moles

moles of O[tex]_2[/tex] = 45gram/32=1.40moles

O[tex]_2[/tex] is the limiting reagent

moles of water = 2.80moles

theoretical yield of water= 2.80×18=50.4g

Therefore, theoretical yield of water is 50.4g.

To learn more about  limiting reactant, here:

https://brainly.com/question/15267094

#SPJ1

Glycerol has a density of ounces/quart equal to. The mass of a sample of glycerol is grams. 1 ounce equals 28.4 grams.

Glycerol is a colourless, odourless, thick liquid generated from both animal and plant fats. It is also known as glycerin or glycerine. It is always found in a wide range of goods, including medications, personal hygiene products, food, and drinks. It is a natural moisturizer, fluid, and lubricant and is a key component of many fats.

Glycerin is a type of carbohydrate known as a polyol, along with other sugar alcohols including sorbitol and erythritol. Glycerin feels sweet, just as sugar alcohols, which I've already discussed. Many living creatures require the sugar alcohol glycerol to survive. It is a part of lipids like phospholipids and glycerides, among others. Glycerol joins with fatty acids to create glycerides, which can act as an energy source.

To know more about glycerol, visit

brainly.com/question/29240183

#SPJ1

The order of the reaction is 3.

For nth order reaction, the unit of the rate constant is liter

Litre^n−1 mol^1−n t^−1

Hence, n−1=2

n=1+2=3

The unit of rate constant for a reaction is liter²1/mol²1/t

Hence, the order of the reaction is 3.

What is the order of reaction?

To know more about order of reaction, click the link given below:

https://brainly.com/question/1769080

#SPJ4

Cleaning supplies for spills should always be disposed of as hazardous trash. Therefore, it is necessary to store and package items like sorbent materials and cleaning supplies for the disposal of hazardous waste.

The term "equipment" most frequently refers to a group of items or other things that are regularly employed to accomplish a certain goal. Equipment needs vary depending on the work.

The plural form of the word equipment is absent. There is no term "equipments," it is only used in the singular, and it goes with a singular verb. There are about 100 common words in this category, which are referred to as "noncount nouns" or "mass nouns."

To know more about Equipment visit:

https://brainly.com/question/30230359

#SPJ4

The anion present in the compound , KOCH₂CH₃ is CH₃CH₂O⁻ .

The ions means that if the atom or the element carry the positive charge means it looses the electrons and form the cation and  If the element or the compound carry the negative charge means that it gains the electrons and make the anion.

The compound is : KOCH₂CH₃

The cation present = K⁺

The anion cation = CH₃CH₂O⁻

The ionic compound is formed between the negatively charge anion and the positively charged cation. The ionic compound is formed by the complete transfer of the electrons.

Thus , the anion CH₃CH₂O⁻ is present in the compound KOCH₂CH₃.

To learn more about anion here

https://brainly.com/question/1659592

#SPJ4

Solids that are soluble in a liquid are said to be soluble solids. Solids that cannot dissolve in water are known as insoluble solids.

I Compounds that disintegrate in a particular liquid to form a solution are known as soluble solids. I Solids that cannot dissolve in the water are referred to as insoluble solids. These insoluble substances either floating or sink when added to water, but they do not mix with that as well.

Something like this that won't disintegrate in a solvent is said to be insoluble. Rarely does a solute not dissolve at all. However, many compounds are not very soluble. Examples include sand, lipids, timber, metals, and plastic.

To know more about insoluble visit:

brainly.com/question/24300575

#SPJ4

Therefore option C is the correct option.

The gravitational force that binds the atom's constituent particles together is known as intermolecular force. The force that unites the many parts when they combine is the one that is being discussed in the inquiry.

Ion-dipole forces, hydrogen bonds between molecules, dipole-dipole forces, and van der Waals forces are the intermolecular forces listed in the answer choices in order of strength to weakness. The strongest intermolecular attraction is between dipoles. They exist between all types of molecules, whether ionic or covalent, polar or non-polar, and are the weakest intermolecular forces.

Compared to liquids and gases, solids typically exhibit the highest intermolecular forces. Because the particles are packed closely together, solids are incompressible and dense. The London dispersion force is the least powerful intermolecular force.

Dispersion Force of London Because it is a transient attractive force that causes a transient dipole, the London dispersion force is also known as the induced dipole. Nonpolar monatomic gases can exhibit London dispersion.

For such more question on intermolecular force,

https://brainly.com/question/13588164

#SPJ4

Consider 5.00 L of a gas at 365 mmHg and 20.∘C . If the container is compressed to 2.70 L and the temperature is increased to 33 °C, the new pressure, P2 , inside the container is 563.372 mm Hg.

The ideal gas law, also known as the general gas equation, is the state equation for a hypothetical ideal gas. Although it has several limitations, it is a good approximation of the behavior of many gases under many conditions.

Apply ideal gas law

P1V1/T1 = P2V2/T2

365 × 5 / 293 = P2 × 2.70 / (33+273)

P = 365 × 5 /293 /2.70 × (33+273)

P = 563.372 mm Hg

Thus, the new pressure, P2 , inside the container is 563.372 mm Hg.

To learn more about an ideal gas law, follow the link;

https://brainly.com/question/30458409

#SPJ1

According to Vanos, barometric pressure of 30 inches of mercury is the most comfortable for people (inHg). The risk of a heart attack increases as it climbs to 30.3 inHg or higher or falls to 29.7 inHg or lower.

Inferring calm weather from higher pressure, whereas bad weather from low barometric pressure. Barometric pressure variations are used by meteorologists and sailors to forecast weather conditions.

High pressure is often characterized by a barometer measurement of over 30.20 inHg and is linked to calm, clear skies. Low pressure is commonly defined as a barometer value of less than 29.80 inHg, and low pressure is linked to warm air and thunderstorms.

To know more about ideal barometric visit:-

https://brainly.com/question/12957311

#SPJ4

It is due of this order of atomic orbital filling that calcium has an electrical configuration of 2, 8, 8, 2, rather than  Your knowledge of atomic structure will increase.

What is an atom's atomic number?

An atomic number of an atom is determined by counting all the protons in its nucleus. It is symbolized by the letter "Z." A specific element's atoms each possess the same atoms since all of its protons are the same. Atomic numbers vary among atoms belonging to various elements.

How can you determine an element's atomic weight?

Discovering Relevant Information the atomic weight, please. Usually, the molecular weight is printed.

To know more about atomic visit:

https://brainly.com/question/1566330

#SPJ4

The actual mass of sulfur yielded by this reaction is 23.4 g

The quantity of moles of a product created in relation to the amount of reactant consumed during a chemical reaction is measured in chemistry as yield, also known as reaction yield. The actual yield is calculated as the theoretical yield multiplied by 100 to get the percent yield.

To find the yield percent we use the equation: percent yield = actual yield/theoretical yield x 100

The theoretical yield for S is as follows:

71. g Cl2 x 1 mol Cl 2  x 1 mol x 32.1 g = 32.1 g S

                     71 g Cl     1           mol S

Percent yield = actual yield/theoretical yield x 100

Actual yield = theoretical yield x percent yield

Actual yield = 32.1 X 73 % = 23.4 g S

Learn more about percentage yield at https://brainly.com/question/20376661

#SPJ4

The presence of polar bonds in a molecule does not imply the presence of a molecular dipole. Carbon dioxide and carbon tetrachloride, for example, have polar bonds but no net molecular dipole.

Bond polarity is related to the individual polarity of the bond in a molecule, whereas molecular polarity is the sum of all the bond polarities in the molecule.

If a molecule is completely symmetric, the dipole moment vectors on each molecule cancel each other out, resulting in a nonpolar molecule.

Thus, a molecule can have bond dipoles but not have a molecular dipole.

To learn more about the molecular dipoles, follow the link;

https://brainly.com/question/12020949

#SPJ1

Answer:

The tissues decompose at a slower rate at lower temperatures.

Explanation:

This is my best guess but I think answer is tissue decompose slower rate at low temperature. This is why we in medicine we store specimens at very low temperature so we can do research on it at a later time but they eventually go bad. Low temperature slow down enzymes and proteins thus breakdown is slower rate.

B: "Digesting a pizza" is an example of a chemical change.

Chemical changes occur when chemical reactions take place and result in the formation of new substances with different chemical and physical properties. The process of digestion of food involves various chemical reactions such as hydrolysis, oxidation, and reduction, which break down complex food molecules into simpler compounds that can be absorbed and used by the body. The original pizza molecules are transformed into new substances and this constitutes a chemical change.

You can learn more about chemical change at

https://brainly.com/question/1222323

#SPJ4

A regular 12-oz beer is about 5% alcohol. This works out to about 14. 03 grams of alcohol per beer. If the driver drank two beers, he consume 28.06 grams of alcohol.

A regular 12-oz beer has 5% alcohol by volume. According to this, a beer contains roughly 14.03 grams of alcohol.

So the mass alcohol in two beers would be

mass alcohol in 2 beers= 2 x mass alcohol in 1 beer

Mass alcohol in 2 beers=14.03 grams of alcohol x 2 = 28. 06 gram

Therefore, 5% alcohol makes up a typical 12-oz beer. According to this, a beer contains roughly 14.03 grams of alcohol. Two beers would equal 28.06 grams of alcohol for the driver.

Learn more about alcohol at https://brainly.com/question/6452985

#SPJ4

The presence of polar bonds in a molecule does not imply the presence of a molecular dipole. Carbon dioxide and carbon tetrachloride, for example, have polar bonds but no net molecular dipole.

Bond polarity is connected to each bond's particular polarity in a molecule, but molecular polarity is the total of all the bond polarities in the molecule. This is the difference between bond dipoles and molecular dipoles.

A molecule will become nonpolar if it is entirely symmetric, as the dipole moment vectors on each molecule will cancel each other out.

Thus, a molecule can have bond dipoles but not have a molecular dipole.

To learn more about the molecular dipoles, follow the link;

brainly.com/question/12020949

#SPJ1

The salt's chemistry is sodium phosphate. Na₃PO₄ Na3PO4 is the chemical name for sodium phosphate, and its molecular weight is 163.94 g/mol.

Is sodium phosphate N3PO4?

Sodium phosphate: Sodium phosphate, which has the chemical formula phospho soda Radiologists are familiar with Na3PO4 since it is frequently used as a cleanser before a double distinction barium enema.

Why is the sodium phosphate formula?

Na3PO4 is the chemical name for sodium phosphate, and its molecular weight is 163.94 g/mol.

To know more weight about:

https://brainly.com/question/10069252

SPJ4

HCl is used instead of plain deionized water in p-phenetidine in amide synthesis of acetophenetidin because HCl's polarity contributes to a reaction driven to the right, it is used for the acid-base reaction rather than water. It protonates the amine group, allowing it to dissolve easily.

An acid-base neutralization reaction is represented as a double-replacement reaction in this traditional representation. For example, the reaction of hydrochloric acid (HCl) with sodium hydroxide (NaOH) solutions yields a solution of sodium chloride (NaCl) and a few extra water molecules.

When acid and base react, they produce salt and water. Water and salt are both neutral, which means that when acid and base react, they neutralize each other. As a result, it is known as a neutralization reaction.

Thus,  HCl's polarity contributes to a reaction driven to the right.

To learn more about an acid-base reaction, follow the link;

https://brainly.com/question/3069273

#SPJ1

NI3 has the highest molar mass = 394.707 grams

Molecular mass = Mass of the atom x the number of atoms

Atomic mass of H = 1.00 amu

O = 15.99 amu

P = 30.97 amu

= 3(Mass of H) + 1(Mass of P) + 4(Mass of O)

= 3(1)+ 1(30.97) + 4(15.99)

= 3 + 30.97 + 63.96

= 97.93 gram

= 1 (mass of N) + 3(mass of I)

= 1(14.0067)+3(126.9)

= 394.7067 grams

= 1(atomic mass of Fe) + 3(atomic mass of Cl)

= 1(55.845)+3(35.45)

=  55.845 + 106.35

= 162.195 grams

KCl = 1(mass of K) + 1(mass of Cl)

= 1(39.09) + 35.45

= 74.54 gram

Out of these NI3 has the highest molar mass = 394.707 grams

Hence NI3 is a correct answer.

To know more about molar mass follow link

https://brainly.com/question/12127540

#SPJ4

The equations q = mcT, whereby m is the test mass, c is the absolute temperature, and T is the change in temperature, may be used to quantify the amount of hot air received or dissipated by a test (q).

A thing's mass is just how much matter it has. Something will weigh more the more matter it includes. For illustrate, an elephant pounds more than a mouse because it has more stuff.

A measurement of an object's kinetic attribute, or how much matter it contains, is the entity's mass. The force of gravity falling on an item is measured by its weight.

To know more about mass visit:

https://brainly.com/question/11681718

#SPJ4