Answer: A increase
Explanation: The temperature of room will increase. If a refrigerator door is open then more flow rate of coolant is required in order to maintain lower temperature So the compressor will be running continuously also heat exchange happening through condenser increases the room temperature rather than decreasing.
Help with this worksheet please (24pts)
Hope you could get an idea from here.
Doubt clarification - use comment section.
What is the problem with this chemical equation: H2 + O2 → H2O
Answer:
To make H2O, you need two H and one O. in this equation, you are given two Os which is too many. you'll end up with an extra O. H2 + O2 -> H2O + O
which of the following best describes a single replacement reaction?
two elements combine to form a compound
one element takes the place of another in a compound
two elements switch places in a compound
a compound breaks into separate elements
Answer:
One element takes the place of another in a compound
Explanation:
I just took a test for it and got it right. :)
Hope This Helps :)
Four students presented different analogies to describe the formation of an ionic bond.
Student A: A tug of war between seven middle school students and a high school student
Student B: A small dog and a big dog tugging at a bone with equal strength
Student C: Two neighbors carpooling to work
Student D: A group of high school students reading from the same book in the library
Which student presented a correct analogy?
A
B
C
D
Answer:
the correct answer is A
Explanation:
I took the test!
Answer:
A probably because its ionic
4. Public water supplies are unsafe in some parts of the world because the water
and
may carry
Answer:
In many parts of the world, water taken directly from wells or public supplies is not safe to drink because it may carry waterborne parasites or other diseases. The water can be sterilized by boiling it, but fuel is needed to do so.
Explanation:
Answer: Public water supplies are unsafe in some parts of the world because the water may carry bacteria.
Explanation:
HOW DO THE FOLLOWING COMPARE IN THE AMOUNT OF ALCOHOL THEY CONTAIN: 12 OZ. BEER(5% ALCOHOL), 12 OZ. WINE COOLER(5% ALCOHOL), 1 1/2 OZ. OF 80 PROOF LIQUOR, 5 OZ. OF WINE(12% ALCOHOL)?
The amount of alcohol contained in each of the listed beverages can be compared as follows; 1/2 oz of 80 proof liquor > 5 oz of wine (12% alcohol) > 12 oz of wine cooler (5%alcohol) = 12 oz of beer (5%alcohol) .
A drink that contains alcohol must be an intoxicating beverage. The extent of intoxication of an alcoholic beverage depends on the amount of alcohol that the beverage contains. There are various types of alcoholic beverages as listed in the question.
The amount of alcohol contained in each of the listed beverages can be compared as follows; 1/2 oz of 80 proof liquor > 5 oz of wine (12% alcohol) > 12 oz of wine cooler (5%alcohol) = 12 oz of beer (5%alcohol) .
Learn more about alcoholic beverage: https://brainly.com/question/6967136
nomenclature of this compound
spammers will be reported
Answer:
Nomenclature is the process of naming chemical compounds with different names so that they can be easily identified as separate chemicals. ... For example, organic compounds include molecules with carbon rings and/or chains with hydrogen atoms (see picture below).01-Jul-2014
Nomenclature: Iron (II) Chloride
Compound: FeCl2
How did the atomic model change due to the research of thomson, rutherford, and bohr?
Answer:
Thomson's plum pudding model of the atom had negatively-charged electrons embedded within a positively-charged "soup." Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.
What is the purpose of an indicator in a titration.
Answer:
The role of indicator in titration is to detect the endpoint of the titration. When the colour of the solution changes, it indicates that the concentration of the chemical specie has reached a critical range. This change in colour is possible with the help of indicators.
Explanation:
hope it helps
#carry on learning and keep safe
correct me if I'm wrong and if correct brainliest me please
according to iupac nomeclature rules which set of chemical name and formula for the same compound is correct?
Answer:
stock and traditional
Explanation:
the iupac says so
PLZ HELP?! 50 points
Write the correct IUPAC name for the following compound
Answer:
2-ethly-3-5 dimethylheptam
Explanation:
trust meeeeee
Part A
Before you design your model village, write down the problems you observed in task 1. What were the largest risks to the community? What happened to the homes?
The largest risks while designing a model to withstand a village include that the model does not mitigate the effects of the tsunami or only mitigates the effects partially, which would cause damages to the homes.
Designing a model to withstand the effect of any natural phenomenon such as an earthquake, fire or tsunami is not an easy task and will require the following cycle:
Designing the model.Testing the model.Making changes or designing a new model.In the case of a model for tsunamis, it is likely the following problems occur:
The model does not protect the houses from tsunamis.The model does not protect the houses completely.This would lead to negative effects such as:
Damages in the houses.Dead or injured people.Destruction of infrastrcture.Note: This question is incomplete because the context is missing; here is the missing part.
Protecting Your Model Village from Tsunamis this task, you will design a model village to withstand the effects of a tsunami.
Learn more about tsunami in: https://brainly.com/question/1126317
Choose all of the examples that show a chemical change.
A) A woodpecker digs in the bark.
B) A dead tree rots on the ground.
C) A forest fire burns a lot of trees.
D) A farmer is cutting logs with an axe.
E) A tree drops rainwater from its leaves.
Answer:
B and C
Explanation:
Answer:
B) A dead tree rots on the ground.
C) A forest fire burns a lot of trees.
Explanation:
It cannot return the the state it was in before or have the same composition it had before.
Melting gold with other metals makes 10-karat gold. Which term best describes 10-karat gold?
compound
homogeneous mixture
heterogeneous mixture
pure substance
Answer:
I think its a homogeneous mixture (pls correct me if im wrong)
Explanation:
It is a homogeneous mixture because its an alloy made of gold, silver, copper, and other metals that are melted together. A homogeneous mixture is composed of a uniform composition of particles.
There are two types of mixture, one is homogeneous mixture and other is heterogeneous mixture. Therefore, the term best describes 10-karat gold is homogeneous mixture.
What is mixture?When two or more compounds are combined but each ingredient retains its chemical identity, the result is referred to as a mixture. In other words, there is no chemical interaction between the parts of a combination. According to how consistent they are and how well the components' particle sizes match up, mixtures are categorized.
Because it is an alloy comprised of melted gold, silver, copper, and other metals, it is a homogenous combination. A homogeneous mixture has a consistent distribution of its constituent particles.
Therefore, the term best describes 10-karat gold is homogeneous mixture.
To know more about mixture, here:
https://brainly.com/question/12160179
#SPJ2
a) how many moles of o2 are needed to burn 1.50 mol of c8h18?
Answer:
Moles of oxygen needed to burn given amount of octane is 16.875 moles.
Explanation:
Question 13 (2 points)
Given the following images, choose the one that most likely represents an M-class star. (2 points)
A
B
с
D
Оа
A
Oь в
Ос
О с с
Od D
Answer:
b. because its Rigel star
Explanation:
hope itsattachments
carbon dioxide fire extinguishers are designed for which types of fuels
Answer:
Carbon Dioxide is a non-flammable gas that extinguishes fire by displacing oxygen
CO2s are designed for Class B and C (flammable liquid and electrical) fires only.
what species has an atom with an oxidation number of 3
25.0g of iron is heated to 100.0 and then placed in 50.0 g of water in a insulated calorimeter. the initial temperature of the water is 38.00. the specific heat of water is 4.181j/g and the specific heat if iron is 0.45j/g. what is the final temp of the water and the iron?
Answer:
Approximately [tex]41.2\; {\rm ^{\circ} C}[/tex].
Explanation:
Let [tex]t\; {\rm ^{\circ} C}[/tex] be the final temperature of the water and the iron.
Temperature of the water would be increase by [tex](t - 38.00)\; {\rm ^{\circ} C}[/tex].
Temperature of the iron would be reduced by [tex](100.0 - t)\; {\rm ^{\circ} C}[/tex].
Let [tex]c[/tex] denote the specific heat of each material. Let [tex]m[/tex] denote the mass of the material. For a temperature change of [tex]\Delta t[/tex], the energy change involved would be:
[tex]Q = c\, m \, \Delta t[/tex].
The energy that the water need to absorb would be:
[tex]\begin{aligned}& Q(\text{water, absorbed}) \\ =\; & c(\text{water}) \, m(\text{water})\, \Delta t (\text{water}) \\ =\; & 4.181\; {\rm J \cdot g^{-1} \cdot K^{-1}} \times 50\; {\rm g} \times (t - 38.00)\; {\rm ^{\circ} C} \\ =\; & (209.05\, t - 7943.9)\; {\rm J} \end{aligned}[/tex].
The energy that the iron would need to release would be:
[tex]\begin{aligned}& Q(\text{iron, released}) \\ =\; & c(\text{iron}) \, m(\text{iron})\, \Delta t (\text{iron}) \\ =\; & 0.45\; {\rm J \cdot g^{-1} \cdot K^{-1}} \times 25.0\; {\rm g} \times (100.0 - t)\; {\rm ^{\circ} C} \\ =\; & (1125 - 11.25 \, t)\; {\rm J} \end{aligned}[/tex].
Since this calorimeter is insulated, the energy that the iron had released would be equal to the energy that the water had absorbed:
[tex]Q(\text{water, absorbed}) = Q(\text{iron, released})[/tex].
[tex]209.05\, t - 7943.9 = 1125 - 11.25\, t[/tex].
[tex]t \approx 41.2[/tex].
Thus, the final temperature of the water and the iron would be approximately [tex]41.2\; {\rm ^{\circ} C}[/tex].
B. Number the digestive process in the correct sequence. Write A-E on the blank 21. Food moves into the small intestine. 22. Food is stored and further broken down by acid and powerful enzymes 23. Your saliva helps break down what you're eating and turn it into chemicals called enzymes. 24..Food moves through your esophagus. 25. Anything left in the small intestine moves into the large intestine
Answer:
21. D (Food moves into the small intestine.)
22. C (Food is stored and further broken down by acid and powerful enzymes.)
23. A (Your saliva helps break down what you're eating and turn it into chemicals called enzymes.)
24. B (...Food moves through your esophagus.)
25. E (Anything left in the small intestine moves into the large intestine.)
Explanation:
Food first enters the mouth where it is chewed and broken down by salivary amylase. Then, it is swallowed, moving down the esophagus to the stomach where it is stored and further broken down by acids and enzymes. And, these broken down food molecules moves into the large intestine.
Which statement does NOT describe subduction zones?
A.
Earthquakes and volcanoes occur at these boundaries.
B.
Old crust is recycled into Earth's mantle.
C.
Volcanic mountains can form at these boundaries.
D.
New crust forms by seafloor spreading
Carbon-12 contains 6 protons and 6 neutrons and electrons. which subatomic particle, if charged, would change identity of the elements.
A. proton
B. neutron
C. electron
D. all of the elements
pleaseee PLEASEEE PLEASEEE I NEED HELPPP!!
can someone do these for me I will give brainliest
express in word equation and chemical equation of the chemical reaction when potassium chlorate is heated.
Answer:
Word equation: Potassium chlorate → Potassium chloride + Oxygen
Chemical equation: KClO₃ → KCl + O₂
Explanation:
This is decomposition reaction so there will only be one reactant, which is potassium chlorate.
The chemical equation will be:
KClO₃ → KCl + O₂
The balanced equation would be:
2KClO₃ → 2KCl + 3O₂
The word equation will be:
Potassium chlorate → Potassium chloride + Oxygen
how much water will you need to add to your working solution to get to a 100 ml total volume of a 0.03m nacl solution?
Answer:
The solution is made by adding 4.38 g NaCl to a 250-mL volumetric flask. About 100 mL of water are added and when all the NaCl dissolves water is added up ...
Which two elements have more protons per atom than phosphorus?
Answer:
nitrogen have more protons per atom than phosphorus
Oxygen and fluorine are the two elements that have more protons per atom than the element phosphorus.
What is phosphorus?Phosphorus (P), a nonmetallic chemical element of something like the nitrogen group (Group 15 [Va] of the periodic table), is a colorless, semitransparent, soft, sticky solid that glows in the dark at room temperature.
Hennig Brand, a German businessman with an interest in alchemy, appears to have discovered phosphorus around 1669. Brand left 50 buckets of pee alone till they putrified and "produced worms." He then reduced the urine to a paste and burned it with sand to extract elemental phosphorus first from combination. Oxygen and fluorine are the two elements that have more protons per atom than phosphorus.
Therefore, oxygen and fluorine are the two elements that have more protons per atom than phosphorus.
To learn more about phosphorus, here:
https://brainly.com/question/29789850
#SPJ6
name any two chemical required for preparation of ammonia gas
Answer:
Ammonium chloride and slacked lime
Explanation:
We can generate ammonia gas in the research centre by slowly heating ammonium chloride (NH4Cl) and slaked lime [Ca(OH)2]. Ammonia gas is lighter than air, requiring its accumulation by the descending displacement of air.
Maximum s-character is observed in
a) Triple bonded carbon atom b) Double bonded carbon atom
c) Single bonded carbon atom d) Carbon atom of benzene
[tex]\huge{\underline{\underline{\boxed{\sf{\purple{ǫᴜᴇsᴛɪᴏɴ}}}}}}[/tex]
Maximum s-character is observed ina) Triple bonded carbon atom b) Double bonded carbon atomc) Single bonded carbon atomd) Carbon atom of benzene[tex]\huge{\underline{\underline{\boxed{\sf{\red{Answer}}}}}}[/tex]
Maximum s-character is observed ina) Triple bonded carbon atomMethane has the chemical formula of CH4 and would, therefore, it would be
considered...
Answer:
compound
Explanation:
A compound contains more than one element.
Methane's chemical formula (CH4) indicates that it consists of one carbon atom and four hydrogen atoms.
Therefore, methane is a compound.
What is the process that results in the formation of an ion