If you have the following data about a container of rice, about how many grains of rice are estimated to be in the container? Mass of Rice + Container = 786 grams Mass of 1000 Grains of Rice = 28 grams Mass of Container ONLY = 332 grams Approximately, how many grains of rice are in the container? ​

Answers

Answer 1

The number of the grains of rice that we have from the question here is  16214 grains

What is the mass of rice?

In this case, we know that we have to rely on the information that we have in the question so as to be able to obtain the mass of the rice that we need in this case and that is what we are going to set out to do in this question.

We know that;

Mass of the Rice = 786 grams - 332 grams

= 454 g

If 1000 grains of rice have a mass of 28 g

x grains of rice have a mass of 454 g

x = 1000 * 454/28

x = 16214 grains

Learn more about rice:https://brainly.com/question/11877986

#SPJ1


Related Questions

What is the temperature (in Kelvin) of a sample of neon with an rms speed of 500.0 m/s?

Answers

Answer: Approximately 267.5 Kelvin

Explanation:

To find the temperature of a sample of neon with an rms speed of 500.0 m/s, we can use the following formula that relates the root mean square (rms) speed of gas molecules to their temperature:

v_rms = sqrt((3kT) / m)

where v_rms is the rms speed of the gas molecules, k is the Boltzmann constant, T is the temperature in Kelvin, and m is the mass of a single gas molecule.

For neon, the mass of a single molecule is approximately 20.18 atomic mass units (u), which is equivalent to 3.35 x 10^-26 kg.

Substituting the given values into the formula, we get:

500.0 m/s = sqrt((3kT) / (3.35 x 10^-26 kg))

Solving for T, we get:

T = (m / (3k)) * v_rms^2

T = (3.35 x 10^-26 kg / (3 * 1.38 x 10^-23 J/K)) * (500.0 m/s)^2

T ≈ 267.5 K

Therefore, the temperature of the neon sample with an rms speed of 500.0 m/s is approximately 267.5 Kelvin.

the calibration is to the 2ml so we do not estinate another digit what is the volume of the liquid in the cylinder

Answers

If calibration is to 2 ml, it means that cylinder is marked with calibration lines at every 2 ml interval. So, we can estimate the volume of liquid in the cylinder to the nearest 2 ml.

What is meant by calibration in chemistry?

In chemistry, calibration is defined as the act of making sure that any scientific process/ instrument produce results which are accurate.

If calibration is to 2 ml, it means that cylinder is marked with calibration lines at every 2 ml interval. So, we can estimate the volume of liquid in the cylinder to the nearest 2 ml.

For example, if the bottom of the meniscus of liquid in the cylinder is at 6 ml mark and the top of the meniscus is between the 14 ml and 16 ml marks, we can estimate that the volume of liquid in cylinder is between 6 ml and 16 ml, but we cannot estimate a value in between such as 8 ml or 10 ml.

To know more about calibration, refer

https://brainly.com/question/30286269

#SPJ1

A chemist must dilute 93.1 mL of 7.79 of uM aqueous mercury (I) chloride solution until the concentration falls to 3.00 uM. She’ll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate the final volume in liters.

Answers

Taking into account the definition of dilution, if chemist must dilute 93.1 mL of 7.79 of uM aqueous mercury (I) chloride solution until the concentration falls to 3.00 uM, the final volume is 0.24175 L.

Definition of dilution

Dilution is a procedure by which the concentration of a solution is lowered, usually with the addition of a diluent.

In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volume

Final volume

In this case, you know:

Ci= 7.79 uMVi= 93.1 mLCf= 3 uMVf= ?

Replacing in the definition of dilution:

7.79 uM× 93.1 mL= 3 uM× Vf

Solving:

(7.79 uM× 93.1 mL)÷ 3 uM= Vf

241.75 mL= 0.24175 L = Vf (being 1000 mL= 1 L)

In summary, the final volume is 0.24175 L.

Learn more about dilution:

brainly.com/question/6692004

#SPJ1

the adolescent brain tends to have more mature pleasure-seeking systems and less advanced systems for controlling behavior.

Answers

This claim is untrue. A developmental mismatch between the maturation of various brain systems, particularly the prefrontal cortex, and the limbic system, is a hallmark of the teenage brain.

The limbic system, which is engaged in emotion regulation and reward processing, develops earlier than the prefrontal cortex, which is in charge of impulse control, decision-making, and other executive processes.

Teenagers may therefore be more likely to participate in a dangerous activity and seek out unique experiences, but they may also have trouble controlling their impulses and making reasoned decisions.

The development of the brain is a complicated and ongoing process, and individual variations in neural maturation and life events can also have an impact on teenage behavior and decision-making.

However, there is no typical pattern of adolescent behavior or brain function due to individual variances and ongoing brain development.

learn more about controlling behavior here

https://brainly.com/question/6646156

#SPJ1

How many grams of copper(II) sulfate pentahydrate (CuSO 4 ​ ⋅5H 2 ​ O) are needed to prepare 100.00 milliliters of a 0.12M copper(II) sulfate solution?

Answers

Answer:2.5 g CuSO4⋅5H2O.

Explanation:

You're dealing with copper(II) sulfate pentahydrate,

CuSO

4

5

H

2

O

, an ionic compound that contains water of crystallization in its structure.

More specifically, you have five moles of water of crystallization for every one mole of anhydrous copper(II) sulfate. This means that you're going to have to account for the mass of this water of crystallization in your calculations.

Now, you need your target solution to have a molarity of

0.10 M

and a volume of

100. mL

. Since molarity is defined as moles of solute per liter of solution, you can say that the target solution must contain

1. Use the bond enthalpies to calculate the enthalpy change for this reaction. Is the reaction exothermic or endothermic?

C2H6O + 3 O2 = 2 CO2 + 3 H2O

Answers

The enthalpy change of the reaction is 7,227 kJ/mol and the reaction is endothermic.

What is the enthalpy change of the reaction?

To calculate the enthalpy change of the reaction using bond enthalpies, we need to find the total energy required to break the bonds in the reactants and the energy released when new bonds are formed in the products.

The enthalpy change of the reaction can be calculated as follows:

Reactants:

1 mole of C2H6O requires breaking 2 C-H bonds and 1 C-O bond.

3 moles of O2 requires breaking 3 O=O bonds.

Products:

2 moles of CO2 releases forming 4 C=O bonds.

3 moles of H2O releases forming 6 O-H bonds.

The bond enthalpies for the relevant bonds are:

C-H = 413 kJ/molC-O = 358 kJ/molO=O = 495 kJ/molC=O = 745 kJ/molO-H = 467 kJ/mol

The enthalpy change for the reaction is:

(2 × 745 kJ/mol) + (3 × 6 × 467 kJ/mol) - (2 × 413 kJ/mol) - (1 × 358 kJ/mol) - (3 × 495 kJ/mol) = 7,227 kJ/mol

Learn more about bond enthalpy here: https://brainly.com/question/26284151

#SPJ1

We know that Paz is trying to produce ammonia (NH3) from thin air. From looking at the experimental set-up, what are the reactants? a) NO2 and H20 b) N2 and H2 c) NO2 and H2 d) N2 and H20

Answers

To produce ammonia (NH₃) from thin air, the reactants required are N₂ and H₂. So the correct option is b).

Give a brief account on production of ammonia.

Ammonia is one of the most abundantly produced inorganic chemicals. In 2016, there are a number of large ammonia plants around the world that produced a total of 144 million tons of nitrogen (equivalent to 175 million tons of ammonia). That number will rise to 235 million tonnes of ammonia in 2021. China produced 31.9% of its global production, followed by Russia at 8.7%, India at 7.5% and the United States at 7.1%. More than 80% of the ammonia produced is used as fertilizer for agricultural crops.

Today, most ammonia is produced on a large scale using the Haber process, with capacities of up to 3,300 tons per day. Gases N₂ and H₂ are reacted at a pressure of 200 bar. A typical modern ammonia production plant first converts natural gas, LPG, or petroleum gas into gaseous hydrogen. The process of producing hydrogen from hydrocarbons is known as steam reforming. Hydrogen then combines with nitrogen to produce ammonia by the Haber-Bosch process.

One way to produce green ammonia is to use hydrogen from the electrolysis of water and nitrogen separated from air. These are fed into the Haber Process (aka Haber-Bosch), all of which produce sustainable power.

To know more about Haber process, visit:

https://brainly.com/question/26667299

#SPJ1

Which of the following is an example of a Mechanical Wave.
Sound Waves
O X-Rays
O Light Waves
O Ultraviolet Light

Answers

Sound waves is correct

Answer:

sound waves

Explanation:

hope this helps

2.
A square platinum sheet has sides 2.50 cm long and a thickness of 0.25 mm. What is th
volume of the platinum sheet (in cm³)?
(a) 16 cm³
(b) 630 cm³
(c) 0.16 cm³
(d) 160 cm³ 1
3.
A standard wine bottle has a volume of 750. mL. What volume, in liters, does this
represent?
(a) 0.750 L
(b) 0.00750 L
(c) 7.50 L
(d) 75.0 L

Answers

Answer: 2. The area of a square with sides 2.50 cm long is:

Area = side × side = 2.50 cm × 2.50 cm = 6.25 cm²

The thickness of the platinum sheet is 0.25 mm, which is equivalent to 0.025 cm.

Therefore, the volume of the platinum sheet is:

Volume = Area × thickness = 6.25 cm² × 0.025 cm = 0.15625 cm³

So, the volume of the platinum sheet is 0.15625 cm³.

Explanation:  3  To convert milliliters (mL) to liters (L), we need to divide the volume in milliliters by 1000.

So, to convert the volume of a wine bottle from 750 mL to liters, we can use the formula:

Volume in liters = Volume in milliliters ÷ 1000

Plugging in the values, we get:

Volume in liters = 750 mL ÷ 1000 = 0.75 L

Therefore, a standard wine bottle has a volume of 0.75 liters.

. In geologic strontium isotopic analysis by ICP-MS, there is isobaric interference (equal mass isotopes of different elements present in the sample solution) between 87Rb+ and 87Sr+. A collision cell with CH3F converts Sr+ to SrF+ but does not convert Rb+ to RbF+. How does this reaction eliminate interference?

Answers

In geologic strontium isotopic analysis by ICP-MS, the use of a collision cell with CH3F helps reduce isobaric interference between 87Rb+ and 87Sr+.

Isotopes can ICP-MS detect?

The ability to quantify each element's distinct isotopes makes ICP-MS useful for laboratories looking to compare the ratio of two isotopes of an element or one particular isotope.

Which elements are immune to ICP-MS detection?

Only a few elements cannot be measured by ICP-MS: F and Ne (which cannot be ionized in an argon plasma), Ar, N, and O (which are present at high levels in the plasma and air), and H and He (which are below the mass range of the mass spectrometer).

To know more about strontium isotopic visit:-

https://brainly.com/question/2496592

#SPJ1

AsH3, HBr, KH, H2Se arrange in increasing order of acid strength

Answers

Answer:

Transcribed Image Text: Rank the following substances in order of increasing acid strength. (1 as least and 4 as most in acid strength) ✓ H₂Se ✓ HBr HI ✓ AsH3 Expert Solution

Explanation:

HOPE IT HELPS!!

b) Verify by calculation what volume of the base it should take to neutralize 50.0 mL of 0.1 M HCl (aq)
with 0.1 M NaOH(aq).

Answers

Answer:

50 ml

Explanation:

n = moles

c = concentration

v = volume

n = c × v

HCl + NaOH --> NaCl + H2O

HCl:

50 ml = 50 cm³ = 0.05 dm³

n = 0.05 × 0.1

n = 0.005

Ratio of HCl to NaOH:

HCl : NaOH

Based on reaction equation:

1 : 1

0.005 : x

x = 0.005

NaOH:

0.005 = 0.1 × v

v = 0.05

0.05 dm³ = 50 cm³ = 50 ml

Balance the equation by typing the numbers that should be in each blank space.
_____Mg + _____HCl → _____MgCl2 + _____H2

Answers

2Mg + 2HCl -> 2MgCl+ 1H2

If the mass of the gas in the preceding problem is
30.1 g
. what is the molar mass or molecular weight of the gas? Answer: At a fixed temperature and number of moles, the initial volume and pressure of a helium gas sample are

Answers

The mass of the gas in the preceding problem is 30.1 g.

To find the molar mass or molecular weight of the gas, we'll use the Ideal Gas Law, which is given as: PV = nRT where, P = pressure of the gas V = volume of the gas n = number of moles of the gas R = ideal gas constant T = temperature of the gas We can rewrite the Ideal Gas Law as: M = (mRT) / (PV) where, M = molar mass or molecular weight of the gas m = mass of the gas R = ideal gas constant T = temperature of the gas P = pressure of the gas V = volume of the gas Substituting the given values in the above formula, we get: M = (30.1 g x 0.0821 L atm mol-1 K-1 x 273 K) / (1 atm x 0.228 L)≈ 29.1 g/mol Hence, the molar mass or molecular weight of the gas is approximately 29.1 g/mol.

for more such questions on mass

https://brainly.com/question/86444

#SPJ11

Which statement below correctly describes their relative atomic radii and first ionization energy when comparing Se and Br? The atomic radius for Se is larger than Br, and the first ionization energy for Se is greater than Br. The atomic radius for Br is larger than Se, and the first ionization energy for Bris greater than Se. The atomic radius for Se is larger than Br, and the first ionization energy for Br is greater than Se. The atomic radius for Br is larger than Se, and the first ionization energy for Se is greater than Br.

Answers

At has a higher initial ionisation energy than Br, while Br has a bigger atomic radius. Se has a bigger atomic radius than Br, and Br has a higher initial ionisation energy than Se.

How do atomic radii and ionisation energy relate to one another (i.e., what happens to ionisation energy as atomic radii grow)?

The most loosely bound electron is further from the nucleus and thus easier to remove in bigger atoms. Hence, the ionisation energy should decrease as size (atomic radius) increases.

Why does ionisation energy rise across a period while decreasing down a group?

This is because the outer electrons aren't bound as strongly because they are farther from the nucleus.

To know more about ionisation energy visit:-

brainly.com/question/27356170

#SPJ1

Which of the following molecules has no dipole moment?
a. C
O
2
b. N
H
3
c. H
2
O
d. none of the above

Answers

This lone pair makes the molecule polar. H2O also has a dipole moment due to the bent structure and the electronegativity difference between hydrogen and oxygen. Therefore, the correct answer is option d. None of the above.

The molecule that does not have a dipole moment is CO2. A dipole moment is a measurement of the separation of two opposite electrical charges in a molecule. The molecule is polar when there is a dipole moment. CO2 is a linear molecule that consists of two polar C-O bonds that are arranged in a straight line. However, the two dipole moments are opposite and equal, which means that they cancel each other out. Thus, the molecule is not polar, and there is no dipole moment for CO2. On the other hand, both NH3 and H2O have a dipole moment. NH3 has a trigonal pyramidal structure that has a lone pair of electrons on the nitrogen atom.

To learn more about  Lone pair :

https://brainly.com/question/3915115

#SPJ11

Predict the principal organic product of the following reaction. Specify stereochemistry where appropriate.

Answers

The major organic product of an SN2 substitution reaction is an alkene, which may be either in retention or inversion of configuration relative to the original substrate.

The reaction you are asking about is an SN2 substitution reaction, in which a nucleophile (Nu) displaces a leaving group (LG) from a molecule with an alkyl halide substrate. The major organic product of this reaction will be an alkene, which has the same carbon chain as the alkyl halide substrate. Depending on the relative configuration of the substrate, the alkene product may be the same as the original substrate (retention) or have its configuration inverted (inversion). If stereochemistry is relevant to the question, then it should be specified in the answer.

To learn more about SN2 substitution :

https://brainly.com/question/29849583

#SPJ11

WHAT IS THE OXIDATION NUMBER OF SULFUR IN THE S2O8 ION?

Answers

Answer:

the oxidation number of sulfur in the S2O8 2- ion is +7.

Step by step explanation:

The oxidation number of sulfur (S) in the S2O8 2- ion can be determined by applying the following rules:

Oxygen (O) has an oxidation number of -2 in most compounds, except in peroxides where it has an oxidation number of -1.
The sum of the oxidation numbers of all the atoms in a molecule or ion is equal to its charge.
In the S2O8 2- ion, there are two sulfur atoms and eight oxygen atoms. Let x be the oxidation number of sulfur.

From the first rule, each oxygen atom contributes -2 to the overall charge of the ion. Therefore, the total contribution from the eight oxygen atoms is -16.

From the second rule, the sum of the oxidation numbers of all the atoms must equal the charge of the ion. Since the ion has a charge of -2, we can write:

2x + (-16) = -2

Simplifying and solving for x, we get:

2x = 14

x = +7

Therefore, the oxidation number of sulfur in the S2O8 2- ion is +7.

Determine the volume (in liters) of a 0.511-mol sample of helium at 555 mmHg and 513 K.

Answers

Answer: 9084355.951 L  if need in correct sig figs answer is

9.08 X 10^6 L

Explanation:

Ideal gas law  PV=nRT  = V=nrt/P

R= 62.44

n=0.511

T= 513

P= 555

V= 0.511 X 62.44 X 513 / 555

solution contains DNA polymerase and the Mg?+ salts of dATP; dGTP dCTP; and TTP: When added l0 aliquots of the solution which ol the following DNA molecules would lead t0 DNA synthesis? a double-stranded closed circle conlaining IO nucleotide pairs single-stranded closed circle containing IOO nuclectide units 4 double-stranded linear molecule o IOOD nucleotide pairs wilh Iree 3 ~OH group at each end 4 single-stranded closed circle ol IOOD nucleotides base-paired (0 & linear strand ol 500 nucleotides with freee' 3'OH lerminus Identily lhe reasons why the DNA molecule you selected would lead lo DNA synthesis: ATP supplies the energy required It is double-stranded DNA Ithas an available templale strand: l has primer with & free 3' OH group: Inconed

Answers

DNA synthesis requires a source of energy, which is provided by ATP. This source of energy is required to drive the formation of the phosphodiester bonds between nucleotides.

Solution contains DNA polymerase and the Mg salts of dATP; dGTP: dCTP; and TTP. When added l0 aliquots of the solution, DNA synthesis occurs in the following DNA molecule. The double-stranded linear molecule of IOOD nucleotide pairs with I free 3 ~OH group at each end would lead to DNA synthesis.

The reasons why the DNA molecule you selected would lead to DNA synthesis are given below:

DNA polymerase enzymes add nucleotides only to a 3-OH end of a pre-existing nucleic acid strand, extending the 3' end of the newly forming strand in a 5' to 3' direction. DNA synthesis proceeds only in a 5' to 3' direction. Double-stranded DNA is required for the formation of new double-stranded DNA. When DNA polymerase is bound to a single-stranded template, it will extend a complementary strand in a 5' to 3' direction. Both strands of the double-stranded DNA molecule serve as templates for DNA synthesis because they have the available template strand. Primer with a free 3' OH group is required to begin the synthesis of a new DNA strand.

DNA polymerase adds nucleotides to the 3' OH group of the primer. DNA synthesis requires a source of energy, which is provided by ATP. This source of energy is required to drive the formation of the phosphodiester bonds between nucleotides.

For more such questions on phosphodiester bonds , Visit:

https://brainly.com/question/30515707

#SPJ11

describe the temperature and pressure conditions at which the gas behaves like an ideal gas

Answers

Under specific temperature and pressure conditions, a gas acts as an ideal gas. Particularly, the optimal conditions for the petrol' behaviour are low pressure and high temperature.

An ideal gas is a hypothetical gas made up of numerous tiny particles moving randomly all the time. Intermolecular forces, molecular size, and volume are all presumptions that apply to ideal gases. Additionally, it is presummated that they collide in completely elastic collisions in which there is no kinetic energy loss. The ideal gas law, PV=nRT, which has P as the pressure, V as the volume, n as the number of moles, R as the gas constant, and T as the temperature, can be used to describe the behaviour of an ideal gas. This law offers a helpful model for how many actual gases behave when exposed to situations like high temperatures and low pressures.

Learn more about ideal gas here:

https://brainly.com/question/28267242

#SPJ4

What mass of lead (IV) sulfite contains 7.25 x 10²³ sulfur atoms?

Answers

The mass of lead (IV) sulfite containing 7.25 x 10^23 sulfur atoms is 3.36 x 10^26 g.

What is Mass?

Mass is a fundamental physical property of matter that describes the amount of substance in an object or system. It is commonly measured in units of kilograms (kg) or grams (g). Mass is often confused with weight, but they are not the same thing. Weight is the force exerted on an object due to gravity, while mass is the amount of matter in the object.

To solve this problem, we need to first find the molar mass of lead (IV) sulfite (Pb(SO3)2), which contains one lead atom, two sulfur atoms, and six oxygen atoms per formula unit.

The molar mass of lead (IV) sulfite can be calculated as follows:

Pb(SO3)2: 1 x molar mass of Pb + 2 x molar mass of S + 6 x molar mass of O

= 1 x 207.2 g/mol + 2 x 32.1 g/mol + 6 x 16.0 g/mol

= 927.0 g/mol

Next, we can use the Avogadro's number to convert the given number of sulfur atoms to the corresponding number of moles of lead (IV) sulfite:

7.25 x 10^23 sulfur atoms x 1 mole Pb(SO3)2/2 moles S = 3.63 x 10^23 moles Pb(SO3)2

Finally, we can use the molar mass of lead (IV) sulfite to convert the number of moles to mass:

3.63 x 10^23 moles Pb(SO3)2 x 927.0 g/mol = 3.36 x 10^26 g

Therefore, the mass of lead (IV) sulfite containing 7.25 x 10^23 sulfur atoms is 3.36 x 10^26 g.

Learn more about Mass from given link

https://brainly.com/question/86444

#SPJ1

18.35 mL of a solution of the acid H₂C₂O4 is titrated, and 58.20 mL of 0.4700-M NaOH is required to reach the equivalence point.

Calculate the original concentration of the acid solution.

Answers

The original concentration of the H₂C₂O4 solution is 0.7455 mol/L.

What is the original concentration of the acid solution?

The balanced chemical equation for the reaction between H₂C₂O4 and NaOH is:

H₂C₂O4 + 2NaOH → Na₂C₂O₄ + 2H₂O

From this equation, we can see that the acid reacts with the base in a 1:2 ratio, meaning that one mole of H₂C₂O4 will react with two moles of NaOH.

To find the original concentration of the acid solution, we need to use the formula for calculating molarity:

Molarity = moles of solute / volume of solution (in liters)

We can start by calculating the number of moles of NaOH used in the titration:

moles of NaOH = Molarity x volume of NaOH used (in liters)

moles of NaOH = 0.4700 mol/L x 0.05820 L

moles of NaOH = 0.027354 moles

Since the acid and base react in a 1:2 ratio, we know that the number of moles of H₂C₂O4 is half the number of moles of NaOH used:

moles of H₂C₂O4 = 0.027354 moles / 2

moles of H₂C₂O4 = 0.013677 moles

Now we can use the formula for molarity to calculate the original concentration of the acid solution:

Molarity of H₂C₂O4 = moles of H₂C₂O4 / volume of H₂C₂O4 used (in liters)

Molarity of H₂C₂O4 = 0.013677 moles / 0.01835 L

Molarity of H₂C₂O4 = 0.7455 mol/L

Learn more about concentration here: https://brainly.com/question/26255204

#SPJ1

a) Explain why alkenes are described as being unsaturated hydrocarbons.

b) Use a diagram to illustrate how a carbon-carbon double bond forms.

c) Draw and explain the mechanism for the reaction between ethene and hydrogen bromide (HBr). In your explanation include and define the terms 'electrophile' and 'carbocation'. Use curly arrows to show electron movements and indicate any partial charges.

Answers

Alkenes are described as being unsaturated hydrocarbons because they contain at least one carbon-carbon double bond, which is not completely saturated with hydrogen atoms.

What is atoms?

Atoms are the basic building blocks of all matter, and are the smallest particles known to exist. Atoms are made up of protons, neutrons and electrons. Protons are positively charged particles located in the nucleus of the atom, while neutrons are neutral particles also located in the nucleus. Electrons are negatively charged particles that orbit the nucleus.

a) Alkenes are described as being unsaturated hydrocarbons because they contain at least one carbon-carbon double bond, which is not completely saturated with hydrogen atoms. The presence of the double bond creates a greater degree of unsaturation than single-bonded hydrocarbons, allowing them to form more chemical bonds and react with other molecules.

b) A carbon-carbon double bond forms when two carbon atoms share two pairs of electrons. The double bond is formed by overlapping the two sp2 hybrid orbitals on each carbon atom.

c) The reaction between ethene and hydrogen bromide (HBr) is an example of an electrophilic addition reaction. In this reaction, HBr acts as an electrophile, meaning it is attracted to the electrons in the double bond of the ethene molecule. The electrons from the double bond are shared between the two atoms in the HBr molecule, forming a covalent bond. This process is known as nucleophilic attack.

The reaction mechanism is shown below:

Step 1: Electrophilic attack of the hydrogen atoms of HBr to the electrons in the double bond of the ethene molecule.

HBr + Ethene → H-Br + Carbocation

Step 2: Nucleophilic attack of a bromide ion on the carbocation, forming a new covalent bond.

Br− + Carbocation → H-Br + Bromoethane

To learn more about atoms

https://brainly.com/question/6258301

#SPJ1

A 0.49 molar solution of a monoprotic acid (HA) in water reaches equilibrium at a concentration of 0.36 M. What is Ka for this acid? Please enter your answer rounded to two significant figures. step by step

Answers

Answer:

We can use the equation for the dissociation of a weak acid:

HA + H2O ⇌ H3O+ + A-

The equilibrium constant expression (Ka) is:

Ka = [H3O+][A-]/[HA]

We are given the initial concentration of the acid (0.49 M) and the concentration of the acid at equilibrium (0.36 M). We can use the concentration change to determine the concentration of H3O+ and A- at equilibrium.

Let x be the concentration of H3O+ and A- at equilibrium. Then, at equilibrium, the concentration of HA is (0.49 - x).

We know that the equilibrium concentration of HA is 0.36 M, so we can set up the following equation:

0.36 = 0.49 - x

Solving for x, we get:

x = 0.49 - 0.36 = 0.13 M

Now we can plug in the equilibrium concentrations into the Ka expression:

Ka = [H3O+][A-]/[HA] = (0.13)(0.13)/(0.36) = 0.0481

Rounding to two significant figures, Ka for this acid is 0.048.

The equilibrium constant of an acid's dissociation reaction is known as the acid dissociation constant, or Ka. The strength of an acid in a solution is numerically represented by this equilibrium constant. Here the value of Ka is 0.0481.

What is acid dissociation constant?

The difference between strong and weak acids is determined by the acid dissociation constant (Ka). As Ka rises, the acid dissociates more. Therefore, strong acids must dissociate more in water. On the other hand, a weak acid has a lower propensity to ionise and release a hydrogen ion, resulting in a less acidic solution.

Here the dissociation constant Ka = [H₃O⁺][A⁻]/[HA]

Let x be the concentration of H₃O⁺ and A⁻ at equilibrium. Then, at equilibrium, the concentration of HA is (0.49 - x). We know that the equilibrium concentration of HA is 0.36 M, so we can set up the following equation:

0.36 = 0.49 - x

Solving for x, we get:

x = 0.49 - 0.36 = 0.13 M

Now we can plug in the equilibrium concentrations into the Ka expression:

Ka = [H₃O⁺][A⁻]/[HA] = (0.13)(0.13)/(0.36) = 0.0481

To know more about dissociation constant, visit;

https://brainly.com/question/14498573

#SPJ2

please answer for brainliest

Using the formula M1V1 = M2V2 , you have a 0.5 M MgSO4 stock solution available. Calculate the volume of the stock solution needed to make 2.0 L of 0.20M MgSO4.

Question 2 options:

4.0 L


0.9 L


0.8 L


0.5 L

Answers

Answer:

0.8 L

Explanation:

The volume of the stock solution needed to make 2.0 L of 0.20M MgSO4 is 0.8 L.

1. Mass of the empty Dish 167.0 g
2. Mass of the dish plus kernel before heating 169.0 g
3. Mass of the kernels before heating 2.0 g
4. Mass of the dish plus popped corn 168.8 g
5. Mass of the popped corn 1.8 g
6. Mass of the water driven 0.2 g
7. Mass percent of water in the popcorn 10%

Given that a sample of unpopped popcorn weighed 58.2 grams and after popping the popped kernels weighed 51.1 grams, calculate the percent water in the unpopped popcorn.

Answers

The mass of water driven off during popping can be calculated by subtracting the mass of the popped corn and the dish from the mass of the dish and kernel before heating.

What is  heating ?

Heating is the process of increasing the temperature of a substance or object, typically using an external energy source such as heat, radiation, or electrical current. The heat energy is transferred to the object or substance, causing its particles to vibrate and move faster, which results in an increase in temperature. Heating is commonly used in a wide range of applications, including cooking, chemical reactions, industrial processes, and space heating.

What is  cooking?

Cooking is the process of preparing food by applying heat, typically using methods such as baking, roasting, grilling, frying, boiling, simmering, steaming, or microwaving. The aim of cooking is to make food more palatable and easier to digest, as well as to kill harmful bacteria and other microorganisms that may be present in raw food. Cooking can also enhance the nutritional value of some foods by making certain nutrients more bioavailable.

To know more  about heating visit :

https://brainly.com/question/1429452

#SPJ1

A natural gas tank is constructed so that the pressure remains constant. On a hot day when the temperature was 33°C, the volume of gas in the tank was determined to be 3000.0L. What would the volume be on a warm day when the temperature is 11°C? Name the law that is used to solve this problem.​

Answers

The volume of the gas on a warm day when the temperature is 11 °C, given that the volume was initially 3000 L, is 2784.3 L

How do I determine the volume at 11 °C?

The following data were obtained from the question:

Initial temperature  (T₁) = 33 °C = 33 + 273 = 306 KInitial volume (V₁) = 3000 LitersNew temperature (T₂) = 11 °C = 11 + 273 = 284 KNew volume (V₂) =?

We can obtain the volume of the gas on the warm day by using Charles' law equation. This is shown below:

V₁ / T₁ = V₂ / T₂

3000 / 306 = V₂ / 284

Cross multiply

306 × V₂ = 3000 × 284

306 × V₂ = 852000

Divide both side by 306

V₂ = 852000 / 306

V₂ = 2784.3 L

Thus, the volume on the warm day is 2784.3 L

Learn more about volume:

https://brainly.com/question/14560487

#SPJ1

Seventy five percent of a compound is carbon. If you have 250 grams of this particular compound, how much carbon is contained?

Answers

Answer:

The compound has 187.5 g. of Carbon

Explanation:

If the 100% of the compound is 250 gr, then you can calculate the 75% of it by multiplying:

Amount of Carbon = (75%) 250 g.

75%= 0.75

250  (0.75)

= 187.5 g.

A mixture of 50 mol % benzene and 50 mol % toluene is distilled under exactly the same conditions as in Part a. Using Figure 4.3, determine the distillation temperature and the percentage composition of the first few drops of distillate.

Answers

The distillation temperature would be > 80 degrees. The composition of the few drops of the distillate would be: 40℅ benzene and 60℅

How to find the distillation temperature?

Distillation is a technique used to separate the components of a combination made up of two liquids that mix well. The liquid mixture is boiled, evaporated, condensed, and isolated using this technique.

The boiling point of a liquid is the temperature at which the vapor pressure of the liquid, a pure compound, or a combination equals 1 atm.

We are aware that pure benzene has a boiling point of 80 oC.

Pure toluene has a boiling point of 106 oC.

As benzene has a lower boiling point than toluene, it distills first. Thus, the distillation temperature is greater than 80 oC.

The mixture contains 40 percent benzene and 60 percent toluene by percentage.

Read more on distillation temperature here:https://brainly.com/question/29439897

#SPJ1

Other Questions
Hypothesis testing is a method of using data relevant to a claim to test the likelihood that the claim is accurate. Which of the following is an ethical use of hypothesis testing in a business situation?As an ethical business owner, you want to find out if the claims you are making about the product you market are accurate. You conduct one or more hypothesis tests to check.You did not do something to evaluate product condition Tara and Jack share a sum of money in the ratio 7: 8Jack got 18 more than Tara.How much did Tara receive? Personal Narrative need help mouth-shaped openings in the epidermis of plants are called Water is being poured into a large, cone-shapedcistern. The volume of water, measured in cm, isreported at different time intervals, measured inseconds. A regression analysis was completed and isdisplayed in the computer output. A tapered shaft is made from 2014 - T6 aluminum alloy, and has a radius of the function r = 0.02(1+x3/2)0.02(1+x3/2) m, x is in meters. The shaft is subjected to a torque of 440 Nm . The shear modulus of elasticity for 2014-T6 aluminum alloy is 27 GPa. What is the angle of twist at the end of A What true statement can be made about the data distributions shown in the box-and-whisker plots below(attached image)ABox 1 is negatively skewed, and Box 2 is symmetricBBox 1 is negatively skewed, and Box 2 is positively skewedCBox 1 is positively skewed, and Box 2 is negatively skewedDBox 1 is positively skewed, and Box 2 is symmetric. in health insurance, if a doctor charges $50 more than what the insurance company considers usual, customary and reasonable, the extra cost People who argue that economic growth will be constrained by the availability of natural resources ignore the fact that scarcity _______. a. is likely to be an issue given the abundance of natural resources b. has little effect on prices so the market can continue to operate in the same way as before c. will lead prices to change in ways that lead both producers and consumers to change their behavior in ways that address the problem sams rectangular swimming pool has a volume of 600 cubic feet, the neighbors pools the same length and height but the width is three times larger. what is the volume of the neighbors pool? when antidiuretic hormones reach the kidneys, what is created? The first question in ______ is whether the company should use its own salesforce or if it should use independent agents such as manufacturer's representatives. Sam (single) bought a townhouse in 2000 for $300,000 and lived there from 2000 to 2009. In 2010, he got married. He and his wife Jenny bought a SFH as their primary home and rented the townhouse out. During pandemic, the tenant lost his job and did not pay rent for a year. As a result, Sam was behind on the mortgage payment of the townhouse. So, Sam sold the townhouse this year for $650,000 (after commission and fees). Which of the following statements is true? (Assume neither Sam nor Jenny has taken exemption before) They had a $350,000 STCG and they need to pay ordinary income tax on $350,000 because they cannot take exemption for STCG. They had a $350,000 LTCG and they do not need to pay any tax because they can take $500,000 exemption. They had a $350,000 LTCG and they need to pay LTCG tax on only $100,000 because Sam can take $250,000 exemption. They had a $350,000 LTCG and they need to pay LTCG tax on $350,000 because they cannot take exemption on rental property. which of the following is not an advantage of using functions. a. using functions makes reusing code easier. b. using functions makes programs easier to read. c. using functions abstracts away from detailed implementation. d. using functions makes program run faster. During London Fashion Week, Burberry used __________ to tell the tale of two models planning to break into its flagship store on Regent Street in London.answer choicesa. contestsb. storytellingc. lensesd. filters In a first-order model with two predictors x1 and x2, an interaction term may be used when the:a) relationship between the dependent variable and the independent variables is linear.b) effect of x1 on the dependent variable is influenced by x2.c) effect of x2 on the dependent variable is influenced by x1.d) both b and c. Discuss the employment relations role-player/stakeholders mentioned in the case study by describing each party's role and critically analyzing the importance of each party the constitution does not provide the design for the committee organization of the congress. truefalse an accumulation of lymph in a region where lymphatic drainage has been blocked is called In which of the following do businesses put customers at the center, manage every contact with them, and leverage this to better serve them and increase sales?Customer relationship managementDemand-supply integrationMaterial and service integrationSupplier relationship management