If the resulting trajectory of the charged particle is a circle, what is ⍵, the angular frequency of the circular
motion?
Express ⍵ in terms of g, m, and Bo.

When troubleshooting an HVAC system, if no voltage is measured across any of the pairs of thermostat wiring terminals, the problem is most likely with the wire connected to terminal C.

HVAC stands for heating, ventilation, and air conditioning. An HVAC system is used to regulate indoor temperatures, humidity, and air quality. It may be used in residential, commercial, or industrial settings. HVAC systems can be complex, with various components and controls, and can require maintenance and repair from time to time.

When troubleshooting an HVAC system, there are several possible causes of a no-voltage problem, including: Tripped circuit breaker or blown fuse in the HVAC system or main electrical panel. Thermostat malfunction: faulty or damaged wiring or connections in the HVAC system, thermostat, or electrical panel.

Transformer failure or malfunction in this case, if no voltage is measured across any of the pairs of thermostat wiring terminals, the problem is most likely with the wire connected to terminal C. This could be due to a wiring or connection problem or a transformer failure or malfunction. A qualified HVAC technician should be consulted to diagnose and repair the problem.

Learn more about HVAC system here:

https://brainly.com/question/28235245

#SPJ11

The electric charge that does not exist in nature is d. - 1.60 × 10⁻¹⁸ C.

What is an electric charge?

An electric charge is a basic property of matter that results from the presence or absence of electrons. Electrons are subatomic particle that makes up atoms. They are negatively charged and have a very small mass. An atom is neutral in its electrical charge since the number of electrons and protons in its nucleus is the same.

There are two kinds of electric charge: positive and negative.

The net charge on an object is the sum of all the charges on it, and it is either positive, negative, or neutral.

What is the electric charge that does not exist in nature?

Negative 1.60 × 10⁻¹⁸ C does not exist in nature because an electric charge is quantized in nature, which means that electric charge is always a multiple of the smallest electric charge unit (charge of an electron or proton).

The electric charge on a proton is equal and opposite to the electric charge on an electron.

Learn more about electric charge here:

https://brainly.com/question/26100412

#SPJ11

Rutherfordium is a synthetic element with the atomic number 104 and symbol Rf. As a synthetic element, it is not found naturally on Earth and is produced through nuclear reactions in laboratories.

Rutherfordium is a member of the transition metals group and is expected to have similar physical and chemical properties to its neighboring elements in the periodic table. However, due to its radioactive nature and short half-life, its physical properties are difficult to determine.

While there is no experimental data available on the state of matter of rutherfordium at room temperature, it is expected to be a solid metal, similar to other transition metals, such as copper or nickel.

To learn more about matter refer to:

brainly.com/question/28591826

#SPJ4

The moment of inertia of the system  for the three situations are 0.026667 kg m2,0.04 kg m2,0.013333 kg .

Four small spheres, each of which you can regard as a point of mass 0.200 kg, are arranged in a square 0.400 m on a side and connected by light rods

a) The moment of inertia of the system about an axis

through the center of the square,

perpendicular to its plane (an axis through point O) is equal to

4 x 0.200 kg x (0.400 m)2/12

= 0.026667 kg m2.

b) The moment of inertia of the system about an axis

bisecting two opposite sides of the square (an axis along the line AB) is equal to

4 x 0.200 kg x (0.400 m)2/8

= 0.04 kg m2.

c) The moment of inertia of the system about an axis

that passes through the centers of the upper left and lower right spheres and

through point O is equal to

2 x 0.200 kg x (0.400 m)2/12

= 0.013333 kg m2.

To learn more about the moment of inertia: https://brainly.com/question/14460640

#SPJ11

After the switch has been closed for a very long time, it is then opened. What is Q(open), the charge on the capacitor at a time open = 623 us after the switch was opened.

After a very long time, a capacitor is completely charged, and when the switch is turned on, the capacitor discharges in the form of an electric current, and the capacitor charges up again when the switch is turned off. Thus, the capacitor's charge Q is calculated using the formula:

Q(t) = C×V(t),

where t is the time,

C is the capacitance of the capacitor,

and V(t) is the voltage across the capacitor at time t.

In this case, the time is open = 623 us after the switch was opened.

The voltage across the capacitor at this moment, V(open), can be obtained using the formula:

[tex]V_{o} = V e^{-t_o/RC}[/tex]

where V0 is the initial voltage across the capacitor, R is the resistance of the circuit, and C is the capacitance of the capacitor.

Substituting the given values,

we have [tex]V_o= 15 V*e^{-623*10^{-6} )/(15*10^{3} *10^{-6})[/tex]

= 13.61 V

The charge on the capacitor at the time open can now be obtained by multiplying the capacitance of the capacitor by the voltage across it at this time:

Q(topen) = C × V(topen)

[tex]= 12*10^{-6} F *13.61 V[/tex]

= 0.1633 mC (or 163.3 µC)

Thus, the charge on the capacitor at the time open = 623 us

after the switch was opened is 0.1633 mC or 163.3 µC.

Learn more about capacitors at:

brainly.com/question/30460477

#SPJ11

A forward biased has been applied to a P-N junction if the cathode is positive with respect to the anode.

A P-N junction is a type of semiconductor junction formed by joining together two types of semiconductors - P-type and N-type. P-type semiconductors have an excess of positively charged holes, while N-type semiconductors have an excess of negatively charged electrons.

When these two types of semiconductors are brought into contact, the electrons from the N-type material flow into the P-type material, filling some of the holes and creating a region with a net negative charge (the N-side), while the P-type material loses some of its holes and creates a region with a net positive charge (the P-side). This creates a potential difference between the P and N regions, which can be used to generate a current. P-N junctions are essential components in electronic devices such as diodes, transistors, and solar cells.

To learn more about P-N junction visit here:

brainly.com/question/13507783

#SPJ4

Yes, it is correct that when the source of blackbody radiation becomes hotter, the peak in its radiation spectrum shifts from the visible to the ultraviolet and beyond. Blackbody radiation is electromagnetic radiation emitted from a blackbody or perfect absorber. This is due to the fact that hotter objects emit shorter wavelengths of electromagnetic radiation, which correspond to higher energy photons. Therefore, when an object gets hot enough to emit mostly ultraviolet or X-ray radiation, it will no longer be visible to the unaided human eye because the human eye can only detect radiation within the visible spectrum of about 400 nm (violet) and 700 nm (red). Therefore, a blackbody that emits radiation beyond this range will no longer be seen by the unaided human eye.

For more information regarding this topic, you can click the below link

https://brainly.com/question/893656

#SPJ11

Functions of phosphorus: Bone formation, ATP production, DNA and RNA synthesis, cell membrane structure.

Order of nondairy foods by calcium content: 1) 1 cup calcium-fortified orange juice, 2) 1 cup Total Raisin Bran cereal, 3) 3 oz salmon with bones.

Highest source of phosphorus: Salmon with bones.

Organs that participate in vitamin D synthesis: Skin (when exposed to sunlight), liver, and kidneys.

What is bone formation?

Bone formation is the process by which bones grow and develop, including the deposition of mineralized bone tissue by osteoblasts and the resorption of bone tissue by osteoclasts, resulting in changes to the shape and structure of bones.

What is RNA?

RNA (Ribonucleic acid) is a molecule that plays a vital role in various biological processes. It is a type of nucleic acid that is composed of a chain of nucleotides, which are the building blocks of the molecule.

RNA is similar to DNA (deoxyribonucleic acid) in terms of its structure, but it has some key differences. RNA is usually single-stranded, while DNA is double-stranded. RNA uses the sugar ribose, while DNA uses deoxyribose. RNA also contains the nitrogenous base uracil, while DNA contains thymine.

To know more about RNA, visit:

https://brainly.com/question/20914096

#SPJ1

Water is reabsorbed through specialized water channels called aquaporins. Aquaporins are transmembrane proteins that are found in the plasma membrane of many types of cells, including those in the kidney, lungs, and salivary glands.

Aquaporins are specialized water channels that allow for the reabsorption of water. The plasma membranes of many different types of cells, including those in the kidneys, liver, lungs, and brain, include integral membrane proteins called aquaporins. By obstructing the passage of other molecules like ions and solutes, they give water molecules a chance to cross the membrane. Aquaporins are necessary for numerous physiological activities, including the concentration of urine and the preservation of cell volume and shape, and help control the body's water balance.

Learn more about specialized water here:

https://brainly.com/question/28097422

#SPJ4

The average arterial pressure in your hands when they are held at your side is 47.5 mmHg.

The average arterial pressure in your hands when they are held at your side can be determined using the hydrostatic pressure formula, which is a function of height, gravity, and density. When the hands are held at the side, they are 60 cm below the heart, which means they are at a distance of 0.6 m.

The hydrostatic pressure formula is given by

P = ρgh

Where,

P is the pressure, ρ is the density, g is the acceleration due to gravity, and h is the height. We can assume that the density of blood is constant, and we can take the value of g to be 9.81 m/s², the standard acceleration due to gravity.

Therefore, the pressure at the heart is 100 mmHg, or 100/760 = 0.131 atm. The pressure in the hands can be calculated as follows:

P = ρghP = (1.06 × 10³ kg/m³) × (9.81 m/s²) × (0.6 m)

P = 6.26 × 10³ N/m²

P = 6.26 × 10³ Pa

P = 47.5 mmHg

Therefore, the average arterial pressure in the hands when they are held at the side is 47.5 mmHg.

Learn more about hydrostatic pressure at https://brainly.com/question/28206120

#SPJ11

Answer: A

Explanation:

The person's relative VO₂ max at the sea level is decreased approximately by 7% and the VO₂ max be at the top of the Everest is essentially 0.

To find out the person's relative VO₂ max at sea level, use the following formula:

Relative VO₂ max (ml/min/kg) = VO₂ max (ml/min) / body weight (kg)

So, relative VO₂ max at sea level (in ml/min/kg) is:

Relative VO₂ max = VO₂ max / body weight = 4.2 L/min × 1000 ml/L / (198 lb / 2.2 kg/lb) = 20.8 ml/min/kg².

It is believed that the VO2 max of a person can be decreased by approximately 7% for every 1,000 meters (3,281 feet) above sea level.

Everest's summit is at an altitude of 8,848 meters (29,029 feet), so the decrease in VO₂ max can be calculated as follows:

Decrease in VO₂ max = (altitude difference / 1000 m) × (7% VO₂ max loss per 1000 m)

So, the decrease in VO₂ max at the top of Everest is:

Decrease in VO₂ max = (8848 / 1000) × 7% = 619%

The person's VO₂ max at the top of Everest would be: VO₂ max at Everest = VO₂ max at sea level × (100 - decrease in VO₂ max) / 100 = 4.2 L/min x (100 - 619%) / 100= -22.6 L/minHowever, it is not possible for the VO₂ max to be negative, so the VO₂ max at the top of Everest is essentially 0.

Learn more about VO₂ max here:

https://brainly.com/question/14287058

#SPJ11

The following is the order of events that take place when oceanic plates spread apart at the mid-ocean ridge:

1. Basaltic lava erupts from the rift.

2. Blocks of oceanic crust are down-dropped in normal faults.

3. Sediment settles onto new basalt.

4. Oceanic crust has a smooth surface covered by layered sediment.

When an oceanic plate diverges from another oceanic plate or diverges from a continental plate, a mid-ocean ridge is created.

The mid-ocean ridge system is formed as magma rises from the mantle and is injected into the crustal rocks above.

The injection of magma creates a rift and extrusion of basaltic lava along the crest of the ridge.

The lava flows out from the crest of the ridge and cools and solidifies to form new crustal rock.

Thus, the first event that occurs when oceanic plates spread apart at the mid-ocean ridge is that basaltic lava erupts from the rift, and blocks of oceanic crust are down-dropped in normal faults.

As the new basaltic rock cools and solidifies, the sediment settles onto it. Finally, the oceanic crust has a smooth surface covered by layered sediment.

To know more about mid-ocean ridge:https://brainly.com/question/7666628

#SPJ11

The total horizontal distance traveled by the bullet in 4 seconds is: 320 meters.

Using the rounded horizontal velocity of 80 m/s.

To calculate this, we use the equation distance = velocity × time, which would be 80 m/s × 4 s = 320 m.

Horizontal velocity refers to the component of projectile motion that is horizontal. The horizontal velocity of a projectile is the velocity at which it is moving horizontally. In the absence of air resistance, the horizontal velocity of a projectile remains constant throughout its motion. A horizontal velocity can be positive or negative. It is positive when the projectile is moving to the right and negative when it is moving to the left.

The formula to calculate the total horizontal distance traveled by a bullet in 4 seconds is given below.

Total horizontal distance traveled = (horizontal velocity) × (time taken)

Substitute the value of the horizontal velocity, which is rounded in the question, in the above formula to calculate the total horizontal distance traveled by the bullet. This will give you the required answer.

To know more about "horizontal velocity" refer here:

https://brainly.com/question/18084516#

#SPJ11

The Chevy will travel a distance f about 600m before catching up with the ford in the same direction of the motion.

The ford if travelling at 15m/s and it is 200 m ahead of the Chevy that is travelling in the same direction with a speed of 20m/s.

Now, we can use velocity = distance/time here,

Time of ford will be equal to the time of Chevy,

Time of ford = Distance/velocity of ford

Time of ford = S/15

Now, for the Chevy, the distance will be 200 more and the time will be same, so we will write,

Time of Chevy = (S+200)/20

(S+200)/20 = S/15

15S + 3000 = 20S

5S = -2000

S = -400m

Negative sign is showing the direction of the motion only, so we can ignore that.

So, the Chevy will travel 600 m before catching up with the ford.

To know more about speed, visit,

https://brainly.com/question/13943409

#SPJ4

Hooke's law: the slope of the curve would be the spring constant (C).

Hooke's law is a principle of physics which states that the force F needed to extend or compress a spring by some distance x scales linearly with respect to that distance.

F = kx

where k is the spring constant and x is the displacement of the spring.

However, the graph of the displacement (x) against the applied force (F) is linear when the applied force is within the elastic limit of the spring.

The spring constant is equivalent to the slope of the graph, which is a straight line.

Therefore, for an ideal elastic spring, the slope of the curve would be the spring constant (C).

To know more about Hooke's law:

https://brainly.com/question/13348278

#SPJ11

The dark lines in an absorption spectrum indicate that certain frequencies or wavelengths of light have been absorbed by the material that the light has passed through. Absorption occurs when an atom or molecule in the material absorbs a photon of a particular frequency, causing the electron in the atom or molecule to move to a higher energy level.

When white light is passed through a sample of a material, some of the frequencies of light are absorbed by the atoms or molecules in the material, causing dark lines to appear in the spectrum. The positions and intensities of these lines depend on the composition of the material and the conditions under which it is observed.

Absorption spectra are used in a wide range of fields, including astronomy, chemistry, and physics, to identify the composition of materials and study their properties. The dark lines in an absorption spectrum are sometimes called absorption lines or Fraunhofer lines, after the German physicist Joseph von Fraunhofer, who first discovered them in the 19th century.

The dark lines in an absorption spectrum indicate the wavelengths that have been absorbed by the substance.What is an absorption spectrum?An absorption spectrum is a graph that demonstrates the amount of light that is absorbed by a material as a function of wavelength. The graph depicts the amount of light that a sample absorbs at specific wavelengths. An absorption spectrum is created when a source of light is transmitted through a material, and certain wavelengths are absorbed and blocked by the material while others are not. The absorbed wavelengths appear as dark lines, whereas the non-absorbed wavelengths appear as bright lines on the graph. Absorption spectra are used to detect the presence of specific materials, as different substances absorb different wavelengths of light.

For more such questions on Absorption spectrum

https://brainly.com/question/10252035

#SPJ11

Although infrared or ultraviolet light is refracted at various angles when it passes through a prism, the resulting spectrum is invisible to the human eye.

The white light is broken down into its component colors—red, orange, yellow, green, blue, and violet—as it passes through the prism. The separation of visible light into its many colors is known as dispersion.

The overall amount of energy in the universe cannot be increased or decreased; rather, it only changes from one form to another. The similar process occurs when we burn a candle; wax's chemical energy is transformed into light and heat energy.

To know more about spectrum visit:-

https://brainly.com/question/12157930

#SPJ1

In the heliocentric model of the solar system, one planet passing another in its orbit gives rise to gravitational forces.

It can also lead to an alteration in the planets' orbits. This is due to the gravitational forces produced by the interaction between the planets. A heliocentric model is a model of the solar system in which the sun is at the center and the planets orbit it. This model was first proposed by Nicolaus Copernicus, a Polish astronomer in the 16th century. He proposed this model after observing that it better explained the motions of the planets than the previous geocentric model, in which Earth was at the center and everything else revolved around it. An orbit gives rise to the gravitational force that causes a planet to continue to travel in a circle around the sun. It is also responsible for the gravitational pull between planets, which affects their orbits. A planet passing another planet in its orbit can also cause some gravitational perturbations in its orbit. This can lead to an alteration in the planets' orbits or cause their orbits to change slightly over time. The heliocentric model is currently the widely accepted theory of how our solar system is arranged. It states that the planets orbit the sun, which is a massive ball of hot gas at the center of the solar system. The sun's gravity is what keeps the planets in their orbits.

Learn more about the heliocentric model  at brainly.com/question/19757858

#SPJ4

(a) The two transitions that produce photons of longer wavelengths during fluorescence are from n=7 to n=5 and from n=6 to n=5.

These transitions are allowed because the energy difference between the n=7 and n=5 levels and between the n=6 and n=5 levels is equal to the energy of a photon with a longer wavelength than the excitation wavelength.

Transitions from n=7 to n=1 or from n=6 to n=1, for example, are not possible because the energy difference between these levels is greater than the energy of the excitation photon. Therefore, the excited electrons cannot decay to these lower energy levels by emitting a photon of lower energy than the excitation photon.

(b) The energy difference between the n=7 and n=5 levels is the same as the energy difference between the n=6 and n=5 levels. Therefore, the wavelength of the photon emitted during the n=7 to n=5 transition is the same as the wavelength of the photon emitted during the n=6 to n=5 transition.

If the longest wavelength of the fluorescence photons is 600 nm, we can use the following equation to calculate the energy of a photon with this wavelength:

E = hc/λ

where h is Planck's constant, c is the speed of light, and λ is the wavelength in meters.

Converting the wavelength to meters, we get:

λ = 600 nm = [tex]6.0 \times 10^{-7} m[/tex]

Substituting into the equation and solving for E, we get:

E = [tex](6.626 \times 10^{-34} Js)(3.00 \times 10^8 m/s)/(6.0 x 10^{-7} m) = 3.31 x 10^-19 J[/tex]

Since the energy of the excitation photon is equal to the energy difference between the n=5 and n=7 levels, we can use the following equation to calculate the wavelength of the excitation photon:

[tex]\Delta E = E_{n7} - E_{n5} = (h^2/8mL^2)(49-25) = 24h^2/(8mL^2)[/tex]

E_photon = hν = ΔE

ν = ΔE/h

λ = c/ν = hc/ΔE

Substituting the values, we get:

[tex]\lambda  = hc/(24h^2/(8mL^2)) = 8mL^2c/3h[/tex]

Hence the wavelength of the original photon is [tex]8mL^2c/3h[/tex].

Learn more about fluorescence:

https://brainly.com/question/24228588

#SPJ11

Solids can become Bose-Einstein condensates at very low temperatures, but gases may become plasmas at very high temperatures. There are further states of matter, such as quark-gluon plasma, and more states might be found.

Exposing a solid to extremely cold temperatures would cause its particles to slow down and reach minimal kinetic energy, resulting in a Bose-Einstein condensate. Conversely, exposing a gas to extremely hot temperatures would cause its particles to move faster, leading to dissociation into individual atoms and ionization into a plasma state. While solids, liquids, and gases are the most common forms of matter, there are other forms such as plasmas, Bose-Einstein condensates, and quark-gluon plasma that exist under extreme conditions. Ongoing research into potential new states of matter may lead to further discoveries in the future.

learn more about Bose-Einstein here:

https://brainly.com/question/12053772

#SPJ4

The only option that best suits the given condition is Option B, which states that the net work done on the cart is negative.In reality, the frictional force may not exactly balance the force applied by the tractor, and as a result, the net work done on the cart may be negative. Therefore, the correct answer is (B) negative.

The net work done on the cart is negative. The friction between the cart and the ground is significant.What is work?Work refers to the change in energy that occurs when an object is moved from one location to another by a force acting upon it. W = FdCosθ is the formula for calculating work. Where F is the magnitude of the force, d is the displacement of the object, and θ is the angle between the force and the displacement vectors.Since the net work done on the cart is negative, it means that the frictional force is greater than the pulling force, causing the object to slow down. As a result, the work done on the cart is considered negative since it acts in the opposite direction to the direction of motion, according to the definition of work.

for more such questions on  frictional force

https://brainly.com/question/24386803

#SPJ11

Net torque and rotational inertia are related to the angular acceleration of a rotating object.

In general, the angular acceleration of a rotating object is directly proportional to the net torque applied to the object and inversely proportional to the object's rotational inertia.

Mathematically, this can be represented as:

α = τ / I

Where

α is the angular acceleration of the object,

τ is the net torque applied to the object, and

I is the object's rotational inertia.

The net torque is the total torque acting on an object, and it is the difference between the clockwise and anticlockwise torques. The rotational inertia of an object is the measure of an object's resistance to rotational motion.When the net torque acting on an object is zero, the angular acceleration of the object is also zero. This is because the torque and angular acceleration have a linear relationship. The greater the torque applied to an object, the greater the angular acceleration of the object.

In conclusion, the net torque and rotational inertia affect the angular acceleration of a rotating object, and the mathematical relationship between them can be experimentally determined using the formula α = τ / I.

Learn more about torque here: https://brainly.com/question/29385853

#SPJ11

The World Trade Organization eliminated the extensive loopholes of the General Agreement on Tariffs and Trade (GATT).

What is the General Agreement on Tariffs and Trade (GATT)? The General Agreement on Tariffs and Trade (GATT) was a treaty that was signed in 1948 in order to help in the liberalization of international trade. The General Agreement on Tariffs and Trade (GATT) aimed at reducing tariffs and trade barriers in order to increase international trade and economic development. It established the basic principles of non-discrimination, most-favored-nation status, and transparency. The GATT's principles and rules were integrated into the World Trade Organization (WTO), which was established in 1995 after the conclusion of the Uruguay Round. The World Trade Organization (WTO) eliminated the extensive loopholes of the General Agreement on Tariffs and Trade (GATT). The WTO replaced GATT, which was a provisional system for international trade. It was a forum for member countries to negotiate and adopt trade policies. The World Trade Organization (WTO) was established to support the multilateral trading system and to ensure that member countries comply with trade agreements. It has a more effective and impartial dispute settlement process, which makes it easier for countries to resolve trade disputes. A significant distinction between the GATT and the WTO is the latter's commitment to global economic cooperation. The WTO provides a more inclusive and efficient method for conducting global trade negotiations. In addition, the WTO has the capacity to cover all aspects of trade policy and to provide binding and enforceable rules.

Learn more about general agreement on tariffs and trade (gatt) at  brainly.com/question/1446090

#SPJ11

The radius of curvature of a concave makeup mirror that is designed so that a person 27.6 cm in front of it sees an upright image at a distance of 50.3 cm behind the mirror is 35.54 cm.

The mirror formula is used to calculate this. When an object is placed in front of a concave mirror, a virtual image is formed behind it. The magnification of the virtual image is positive. Here's how to solve the problem:

1/f = 1/u + 1/v

where, f is the focal length of the mirror, u is the distance of the object from the mirror, v is the distance of the image from the mirror.

Given that , u = −27.6 cm (the negative sign indicates that the object is on the left-hand side of the mirror).

v = −50.3 cm (the negative sign indicates that the image is on the left-hand side of the mirror).

To calculate the radius of curvature, the focal length is required. The focal length can be calculated using the mirror formula.

1/f = 1/u + 1/v = (v + u)/uv = (-27.6 - 50.3)/(-27.6 × 50.3) = 77.9/1388.28 = 0.0562 cm. Therefore = 1/0.0562 = 17.77 cm.

The radius of curvature is twice the focal length.

2R = 2f = 2 × 17.77 = 35.54 cm

Thus, the radius of curvature of the mirror is 35.54 cm.

Read more about the radius here:

https://brainly.com/question/27696929

#SPJ11

The accumulation of excess electric charge on an object is called Static electricity.

The excess electric charge remains on the surface of an object until it is discharged, creating a spark or a small electrical shock.

Electric charge is a fundamental property of matter. The total electric charge of a system is the algebraic sum of the charges of its constituents. Electric charge is measured in coulombs (C), which is a unit of electrical charge.

Static electricity is the accumulation of excess electric charge on an object. When two different materials are rubbed together, electrons can be transferred from one material to the other. This transfer of electrons causes one material to become positively charged, while the other becomes negatively charged.

The two materials will then have an electrostatic charge, and the charges will be attracted to each other. Static electricity is responsible for lightning, which is a natural phenomenon. Lightning is caused by the build-up of static electricity in clouds. When the build-up of static electricity is sufficient, it will discharge in the form of a lightning bolt.

For similar question on Static electricity

https://brainly.com/question/821085

#SPJ11

In Isentropic turbine ,Net power developed = [(1/2.2) x (20,313 Btu/lbmol) x (1.7 lbmol/h)] / [(1.3558 x 10^5) x (0.903)] = 57.0 horsepower. Percent of theoretical air = 100 x [(1.7 lbmol/h)/(1.7 lbmol/h x [1/2.2])] = 77.3%

A) To determine the percent of theoretical air required, use the equation:


Percent of theoretical air = 100 x [(Actual mass of air used)/(Theoretical mass of air required)]


The theoretical mass of air required can be determined using the equation:


Theoretical mass of air = [(Mass of propane used)/(Combustion products of air-fuel ratio)]


The combustion products of air-fuel ratio can be determined by using the equation:


Air-fuel ratio = [Air/Fuel]


Using these equations, we can calculate the percent of theoretical air required:


Percent of theoretical air = 100 x [(1.7 lbmol/h)/(1.7 lbmol/h x [1/2.2])] = 77.3%


B) To determine the net power developed, in horsepower, use the equation:


Net power developed = [(Air-fuel ratio) x (Heat of combustion) x (Molar flow rate)] / [(1.3558 x 10^5) x (Thermal efficiency)]


Using these equations, we can calculate the net power developed:


Net power developed = [(1/2.2) x (20,313 Btu/lbmol) x (1.7 lbmol/h)] / [(1.3558 x 10^5) x (0.903)] = 57.0 horsepower.

For more such question on Isentropic turbine

https://brainly.com/question/14087805

#SPJ11

The primary purpose of a generator is to convert mechanical energy into electrical energy. This is achieved through the application of a force to a loop of wire (often called a coil) that is rotating in a magnetic field.

As the coil rotates, it cuts through the magnetic field lines, which induces an electromotive force (EMF) or voltage across the wire. The amount of voltage induced depends on the strength of the magnetic field, the number of turns in the wire coil, and the speed at which the coil is rotated. This induced voltage can be used to power electrical devices, such as lights, motors, and appliances. Generators are used in a variety of applications, including power plants that generate electricity for cities and industries, portable generators for backup power, and small generators for camping and outdoor activities.

Learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ4

The diffraction limit of a 4-meter telescope is two times smaller than that of a 2-meter telescope.

The diffraction limit of a telescope is the minimum distance between two objects so that they can still be viewed as separate from one another. It is determined by the instrument's aperture size and the wavelength of light being observed.

The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.

In simpler terms, the diffraction limit refers to the smallest object size that a telescope can observe. This is known as angular resolution, which is determined by the telescope's aperture size and the wavelength of light being observed.

The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.

Therefore, a 4-meter telescope has a smaller diffraction limit than a 2-meter telescope. Hence, the answer is two times smaller.

Learn more about Diffraction limit here:

brainly.com/question/15081792

#SPJ11