If the net force on a baseball with a mass of 0.145 kg is 18.9 N, then was is the resulting acceleration?

The frequency of a sound wave remains constant when it moves through one medium to another, whereas the wave's temperature, velocity, and wavelength all change.

Frequency is the number of waves that pass through a specific spot in a defined amount of time. A wave has a frequency of 2 per second if it goes though within less than one second. if the time required becomes a hundredth of either an hour.

The frequency of a recurrent occurrence, such as a wave, over a given time period is measured using this unit. A cycle is a single instance of the regular pattern. only waves that are moving and have different positions.

To know more about frequency visit:

https://brainly.com/question/22548127

#SPJ4

If a 100 V power supply is connected in the circuit below, what are the possibly correct readings on the ammeters clockwise from the upper left (A1-A7), 3 A, 1A, 2A, 1A, 2A, 1A, 3A. so, option (a) is correct.

What is ammeter ?

A shunt and a gadget known as a galvanometer are parallelly linked within the ammeter. Shunts are resistances that let measured current flow through an ammeter and provide a complete readout. A sensitive current detector is the galvanometer.

What is power ?

Work is done at a certain rate according to power. P=Wt. The watt (W), which is equal to 1 joule per second (1J/s), is the SI unit of power. Power is the rate at which energy is used up since power is the transfer of energy. For instance, a 60-W light bulb uses about 60 J of energy every second.

Therefore, If a 100 V power supply is connected in the circuit below, what are the possibly correct readings on the ammeters clockwise from the upper left (A1-A7), 3 A, 1A, 2A, 1A, 2A, 1A, 3A.  (a).

Learn more about ammeter from the given link.

https://brainly.com/question/18634425

#SPJ1

Deep is the water level in the well below where she tossed the stone is 52.92 m.

Consider the equation of motion s = ut + 0.5 at²

Take the upward direction as positive,

           Initial velocity, u =   8 m/s

           Acceleration, a =   -9.81 m/s²

           Time, t = 4.20 s

Substituting

        s = ut + 0.5 at²

        s = 8 x 4.20 + 0.5 (-9.81) x 4.20²

        s = -52.92 m

Depth of well = 52.92 m

The pace is the directional speed of an item in motion as a demonstration of its price of alternate in the role as observed from a specific body of reference and as measured via a particular widespread of time (e.g. 60 km/h northbound). speed is a fundamental concept in kinematics, the branch of classical mechanics that describes the motion of our bodies.

Velocity is a bodily vector amount; each significance and route are needed to define it. The scalar absolute value (significance) of speed is known as velocity, being a coherent derived unit whose quantity is measured inside the SI (metric device) as meters in step with second (m/s or m⋅s−1). as an example, "5 meters in step with 2d" is a scalar, whereas "5 meters consistent with 2nd east" is a vector. If there is a trade-in velocity, route, or each, then the object is stated to be present process an acceleration.

To learn more about Velocity visit here:

brainly.com/question/30559316

#SPJ4

The centripetal force acting on the dog is 245 N (The options are wrong).

The formula for centripetal force is given by F = m × v² / r, where m is the mass of the object (in this case, the dog), v is the velocity of the object, and r is the radius of the circular path.

Plugging in the given values:

F = 10 kg × (7 m/s)² / 3 m = 245 N

So the centripetal force acting on the dog running around a tree is 245 N.

Find out more on centripetal force here: https://brainly.com/question/20905151

#SPJ1

Answer:

the ball that is thrown down

Explanation:

due to force

The correct answer is B) The car is slowing down.

Velocity is a vector quantity that measure the rate and direction of the change. Velocity is an object position it is equal to distance traveled devide by time.

This is because when the velocity is to the left and the acceleration is to the right, the acceleration is in the opposite direction of the velocity.
This means that the car is experiencing a deceleration, or a slowing down of its velocity. Since the acceleration is to the right, the car is slowing down with respect to the right.

To know more about velocity click-
https://brainly.com/question/24445340
#SPJ4

The fundamental frequency change when the mass per unit length of a guitar string increases by a factor of 3.50 is, 3.5ⁿ

Frequency definition states that it is the number of complete cycles of waves passing a point in unit time, the SI unit of frequency is Hertz(Hz),

The frequency of a sinusoidal wave as the number of complete oscillations made by any wave element per unit of time.

The frequency of vibration of a string depends on the length L between the nodes,

the tension F in the string and its mass per unit length m.

Frequency,

f ∝ [Lᵃ] ... (1)

f ∝ [Fᵇ]  ...(2)

f ∝ [Mⁿ]  ...(3)

Combining equation (1) (2) and (3) we can say:

f₀ = k[Lᵃ x Fᵇ x Mⁿ]

So, when the mass per unit length increases by a factor of 3.50

Then, the new frequency is,

f = k[Lᵃ x Fᵇ x( 3.5M)ⁿ]

 = 3.5ⁿ x k[Lᵃ x Fᵇ x Mⁿ]

f = 3.5ⁿ f₀

Hence, the frequency will increase by a factor of 3.5ⁿ

To know more about frequency check:

https://brainly.com/question/29739263

#SPJ1

Answer:

The equation of a transverse wave traveling along a very long string is y=6.0sin(0.020πx+4.0πt), where x and y are expressed in centimeters and t is in seconds. Determine (a) the amplitude, (b) the wavelength, (c) the frequency, (d) the speed, (e) the direction of propagation of the wave, and (f) the maximum transverse speed of a particle in the string. (g) What is the transverse displacement at x=3.5 cm when t=0.26s?/(a) The amplitude is y

m

​

=6.0 cm.

(b) We find λ from 2π/λ=0.020π⋅λ=1.0×10

2

 cm.

(c) Solving 2πf=ω4.0π, we obtain f=2.0 Hz.

(d) The wave speed is v=λf=(100 cm)(2.0 Hz)=2.0×10

2

 cm/.s

(e) The wave propagates in the −x direction, since the argument of the trig function is kx+ωt instead of kx−ωt

(f) The maximum transverse speed (found from the time derivative of y) is

u

max

​

=2πfy

m

​

=(4.0πs

−1

)(6.0 cm)=75 cm/s

(g) y(3.5 cm,0.26 s)=(6.0 cm)sin[0.020π(3.5)+4.0π(0.26)]=2.0 cm.

Answer:

The average acceleration of the sports car is 16.9 m/s².

If the researcher wants to measure internal consistency in a test , then the best method to use in measuring the internal consistency is Split Half Reliability .

The Split Half Reliability is defined as a method which is used to measure the internal consistency of a test by splitting the test into two halves and then calculate the correlation between the scores on the two halves of the test .

In this case, the researcher wants to measure the internal consistency of a test that measures two different constructs (self-esteem and depression) without subdividing the items into the two construct groupings.

Since the test measures two different constructs, the split half reliability may not be able to provide an accurate estimate of internal consistency, because  the correlation between the scores on the two halves may be influenced by the different constructs being measured.

The given question is incomplete , the complete question is

A researcher wants to measure internal consistency in a test that measures two different constructs (self-esteem and depression) without subdividing the items into the two construct groupings. What would be the best method to use in measuring internal consistency ?

Learn more about Internal Consistency here

https://brainly.com/question/14249962

#SPJ4

After converting he units from R to Joule, we obtain 5.33 × 10⁻¹⁰ J·cm⁻⁴ as the result.

What is joule?

To convert  R to J, convert their units,

1 kPa·km = 1.0 × 10⁻⁸ J(cm⁻⁴)

0.0533 kPa·km = -0.0533 × 1.0 × 10⁻⁸ J(cm⁻⁴)

= 5.33 × 10⁻¹⁰ J·cm⁻⁴

Thus, After converting he units from R to Joule, we obtain 5.33 × 10⁻¹⁰ J·cm⁻⁴ as the result.

To know more about joule, click the link given below:

https://brainly.com/question/25982371

#SPJ4

The copper wire that connects the circuit is left on for a number of minutes before becoming heated. False, the wire becomes hotter as it gets hotter. Thus, it is false.

A complete circular path through which electricity flows is known as a circuit in electronics. A simple circuit consists of a current source, conductors, and a load.

The term “circuit” can broadly be used to describe any ongoing path via which electricity, data, or a signal might go.

Closed circuit, open circuit, short circuit, series circuit, and parallel circuit are the main varieties of electric circuits. The movement of electric charge or current has a conductive channel thanks to electric circuits.

Therefore, it is false that if a complete circuit is left on for a number of minutes, the copper wire that connects the devices gets warm. When the wire's temperature rises, so does its electrical resistance.

Learn more about electrical resistance here:

https://brainly.com/question/29604143

#SPJ4

Answer:

W = 48.36 x 6.5 = 314.34 J.

Explanation:

The work done by the man in pushing the mower is the force multiplied by the displacement. Since 26% of the force is directed horizontally, we can calculate the amount of force that is directed horizontally as 0.26 x 186 N = 48.36 N. The work done is then calculated as W = F x s, where F is the horizontal force and s is the displacement. Therefore, the work done by the man in pushing the mower 6.5 m is W = 48.36 x 6.5 = 314.34 J.

Answer:

My basic purpose of designing this blog is to get ride of students from private tution and academy culture.Secondly, sometimes you are present in the class physically but not mentally so as a result you can't give attention to your lecture, so you missed it. This blog will provide you video lectures with complete description. So you can take lecture any time and any where.

Explanation:

Answer:

It takes approximately 10.3 seconds to accelerate from 70km/h to 120km/h, when the acceleration is 2.0m/s.

Compared to the bowling ball, the golf ball after the collision has a) less momentum but more kinetic energy.

The bowling ball's velocity and, consequently, its kinetic energy are significantly lower than those of the golf ball because its mass is significantly greater than that of the latter.

Why is the kinetic energy of a bowling ball greater than that of a golf ball?

First off, heavier objects in motion have more kinetic energy than lighter ones. For example, a bowling ball travelling at 10 m/s (the equivalent of a very fast sprint) has a lot more kinetic energy than a golf ball travelling at the same speed.

How does a collision between a bowling ball and bowling pins alter their kinetic energy?

When two objects collide, some of the kinetic energy is converted during the collision to another form of energy, this is known as an inelastic collision. A portion of the kinetic energy from the bowling ball is transferred to the pins when it strikes them, as evidenced by the way bowling balls and pins scatter and bounce after impact.

Which ball has more inertia, a golf ball or a bowling ball?

As a result of having more mass than a golf ball, a bowling ball will have a higher moment of inertia.

To know more about kinetic energy:

https://brainly.com/question/18212023

#SPJ1

(a) The horizontal distance traveled is 1940 m.

(b) The final velocity and the angle with which the cannon hits the ground are of the cannon is 180.07 m/s and 63.4⁰ respectively.

(c) The acceleration of the cannon ball just before it hits the ground is 29.44 m/s².

The time of flight or time of motion of the cannon is calculated as follows;

t = √ ( 2h / g )

where;

t = √(2 x 250 / 9.8 )

t = 15.6 s

The horizontal distance traveled can be found using the velocity and time of flight,

Horizontal distance (d) = vt

d = 125 m/s  x 15.6 s

d  = 1940 m

The final velocity of the cannon is calculated as ;

Vertical velocity (v fy ) = gt

v = 9.8  x 15.6 s

v = 153.68 m/s

v f = √(Vx² + Vy²)

vf  = √ (125² + 153.68²)

vf = 180.07 m/s

θ = arc tan ( Vy / Vx )

θ = arc tan (153.68 m/s / 125 m/s)

θ = 63.43°

The acceleration of the cannon ball just before it hits the ground can be calculated using the final velocity and the time of flight,

a = (v f² - v i²) / (2t)

a = (180.07²  - 0²) / (2 x 15.6 s)

a = 29.44 m/s²

Learn more about horizontal distance here: https://brainly.com/question/24784992

#SPJ1

The required compass needle tends to line up parallel to a magnetic field. Option B is correct.

A magnetic field is a field that surrounds a magnetic object and exerts a force on other magnetic objects within the field. It is a type of field generated by moving electric charges or by magnetic materials.

Here,

A compass needle tends to line up parallel to a magnetic field. The compass needle is a magnet and the magnetic field from the Earth causes it to align in a north-south direction, with the North end of the needle pointing towards the magnetic North Pole.

Thus, the required compass needle tends to line up parallel to a magnetic field. Option B is correct.

Learn more about magnetic fields here:
https://brainly.com/question/11514007
#SPJ1

The output by the equation and energy required for friction is 160,000 J. Efficiency is 0.267 or 26.7% and this efficiency can be improved by friction reduction.

The weight of the water pushed and the height it is lifted can be multiplied to determine the beneficial work done by the pump. The volume of water in the tank multiplied by its density yields the weight of the water therein. The tank's total volume, which can be determined by multiplying the tank's cross-sectional area by its height, is equal to half of the amount of water in the tank (8 m). The water therefore weighs:

Volume is calculated as cross-sectional area times height (2 m x 8 m = 16 m3).

Weight is equal to volume times density, or 16 m3 times a density of 1000 kg/m3 equals 16,000 kg.

Useful work=Weight x Height = 16,000 kg x 10 m = 160,000 J for useful work.

A proportion of the useful work can be used to estimate the amount of energy needed for friction. This proportion is influenced by the pump's design, the water's viscosity, and other elements. The energy needed for friction can be computed using a 10% friction loss as follows:

Frictional energy equals 0.1 x 160,000 J, or 16,000 J.

The ratio of the pump's useful work to its energy input can be used to calculate the pump's efficiency. The energy input can be estimated as the motor's power (1 kW) times how long it runs for (10 minutes, or 600 seconds). So, the efficiency can be determined as follows: Energy input is calculated as follows: 1 kW x 600 sec = 600,000

Efficiency is calculated as follows: 160,000 J of useful work per 600,000 J of energy input, or 26.7%.

The friction loss can be decreased, the pump's design can be improved to reduce energy losses, or the motor's power can be increased to increase the pump's efficiency. As the beneficial work performed by the pump is directly proportional to the height the water is lifted, increasing the height the water is lifted is another alternative.

To know more about friction, check out:

https://brainly.com/question/24338873

#SPJ1

There is nothing we can say about the acceleration of either car

How does acceleration work?

The rate at which velocity changes is called acceleration. Acceleration typically indicates a change in speed, but not necessarily. An item that follows a circular course while maintaining a constant speed is still moving forward because the direction of its motion is shifting.

The rate of change of displacement is known as velocity. The rate at which velocity changes is called acceleration. Due to the fact that it includes both magnitude and direction, velocity is a vector quantity. As the rate at which velocity changes, acceleration is likewise a vector quantity.

To learn more about acceleration use link below:

https://brainly.com/question/30660316

#SPJ4

Answer:

535.3 kJ heat was absorbed.

Explanation:

The heat absorbed by the water can be calculated using the equation:

Q = mLf

where Q is the heat absorbed, m is the mass of the water, Lf is the heat of vaporization, and Lf is the amount of heat required to vaporize a substance at a constant temperature.

The heat of vaporization of water at 100°C is 40.7 kJ/mol. Since 1 mol of water has a mass of 18.02 g, the heat of vaporization per gram of water is 40.7 kJ/mol / 18.02 g/mol = 2.257 kJ/g.

So the heat absorbed by the 238.8 g of water can be calculated as:

Q = 238.8 g * 2.257 kJ/g = 535.3 kJ.

This is the amount of heat energy absorbed by the water to convert from a liquid at 17.5°C to a gas at 118.9°C.

The PE (potential energy) of the ball at the very top of the diagram is 100 J.

The KE (kinetic energy) of the ball at the very top of the diagram is 0 J.

The PE of the ball the location shown as I on the diagram is 50 J.

The KE of the ball the location shown as J on the diagram is 50 J.

Friction is a force that acts between two objects that are in contact with each other and opposes their relative motion.

The velocity of the ball the location shown as B on the diagram can be calculated by the equation KE = 0.5 * m * v^2, where m is the mass of the ball (2 kg) and KE is the kinetic energy (50 J). Solving for velocity, we get v = sqrt(KE / (0.5 * m)) = sqrt(50 / (0.5 * 2)) = 7 m/s.

The PE of the ball the location shown as F on the diagram as the ball hits the ground is 0 J.

The KE of the ball the location shown as G on the diagram as the ball hits the ground can be calculated by the equation KE = PE + 0.5 * m * v^2, where m is the mass of the ball (2 kg) and v is the velocity of the ball (calculated in #5 as 5 m/s). Solving for KE, we get KE = 0 + 0.5 * 2 * 5^2 = 50 J.

Using the equation KE = 0.5*m*v2, the velocity can be determined to be 7.07 m/s for B and E and 10 m/s for H and K.

The 100 J of original mechanical energy is present at each position. So the KE for A is 50 J.

The KE of the ball the location shown as A on the diagram can be calculated by the equation KE = PE + 0.5 * m * v^2, where m is the mass of the ball (2 kg) and v is the velocity of the ball. The KE at A will be 50J.

The PE of the ball the location shown as C on the diagram can be calculated by conserving energy, meaning that the initial PE at the top of the ramp plus any work done by friction must equal the final KE at this location. This can be expressed as PE + work done by friction = KE, where work done by friction is equal to friction force times distance. So, at C, PE=50J and the KE of the ball the location shown as D on the diagram can be calculated by the equation KE = PE + 0.5 * m * v^2 So, KE for D will be50J.

To know more about Friction, visit

brainly.com/question/28356847

#SPJ1

Because Mg2+ is more positively charged than Na+, MgO has a higher melting point than NaF. Moreover, O2 has a stronger negative charge than F (I & II only, option A)

Ionic solids MgO and Naf both exist. MgO has a higher melting point than NaF because it takes more energy to break the bonds in MgO since it contains higher-charged ions than NaF (Na+ and F).

While Naf (Na+ and F) has a monovalent nature, MgO (Mg2+ and O2) has both divalent (Mg2+ and O2) ions. In the crystal lattice of MgO, the electrostatic forces between the ions are higher than in the case of Naf. As a result, MgO's melting point (2642⁰ C) is greater than NaF's (992⁰ C).

Learn more about melting point here: https://brainly.com/question/40140

#SPJ4

Answer:

Explanation:

2nd choice:  120 N in row one and 67 N in row two

Applied forces have to be equal in magnitude and opposite in direction to cancel each other out and result in no change to the object's motion

A dry-type evaporator is another name for a direct expansion evaporator. An evaporator seems to be a container or platform that converts liquid into vapor.

In contrast to the condenser, the evaporator absorbs heat from the compartment's air while converting refrigerant liquid to gas. Due to the reduced pressure and heat dissipation, the liquid refrigerant is much cooler than for the fan air surrounding it when it reaches the evaporator.

One of the popular evaporators is the LTV. Basically, it is a liquid separator coupled to a shell and tube heat exchanger. The climbing film evaporator and the descending film evaporator are quite similar. It is the total opposite of something like a falling movie.

To know more about evaporator visit:

https://brainly.com/question/17164330

#SPJ4

Out of the following statement, a.the tension T1 and  d.tension t2 would increase if a second traffic light were attached to the first.

The addition of a second traffic light increases the tension in both cables, when two traffic lights are connected, the cable connected to the first light T1 will increase in tension due to the added weight of the second light. The additional weight creates a greater force that must be resisted and so the tension in the cable will increase, similarly the cable connected to the second light, T2 will also increase in tension due to the added weight of the first light.

The angle of the cable with tension T2 will also increase due to the additional force created by the tension in T1. This increase is due to the additional force created by tension inT1,  this increase in tension and angle can be seen in the physical world as the cables connected to the two traffic lights stretch and bend to accommodate the additional weight, the increase in tension and angle helps to ensure that the two lights stay secure and remain in the proper position.

To know more about  tension refer to the link  brainly.com/question/29763438

#SPJ4

The bowling ball's position and time are related by a linear equation.

A linear equation is a mathematical formula that depicts the proportionate relationship between two or more variables, i.e., how changes in one variable cause predictable changes in the others.

The equation x(t) = v0t + x0, where v0 is the starting velocity of the ball (2.5 m/s) and x0 is the initial position of the ball, explains how the position of a bowling ball moving over a smooth surface change with time t. (-5.0 m).

In other words, the ball's position is proportional to the amount of time that has passed, with the beginning velocity, v0, serving as the proportionality constant. Since the ball's velocity is constant, its position advances linearly with time.

As a result, the bowling ball's polynomial relationship between location and time can be represented by a linear equation. Since cubic and inverse exponential equations are often non-linear and have more complicated forms, it is not one of those.

To know more about linear equation, visit:

https://brainly.com/question/29739212

#SPJ4

Answer:

vamos tú puedes

Explanation:

The pressure at the point x is atmospheric pressure was . Option A

We know that the barometer is a kind of device that can be used in the measurement of the pressure of the substance. We have to note that the barometr does have two arms.

The image of the barometer is not shown in this question but we know that the pressure does become equilibrated between the two arms of the barometer that have been shown such that the have the same pressure.

Learn more about barometer:https://brainly.com/question/30166820

#SPJ1