If the Moon did not rotate at the same rate that it revolved, which of the following would be true?​

Answer:

The hot water kills the leaf and the alcohol breaks down the chlorophyll, taking the green color out of the leaf.

Explanation:

Soaking the leaf in alcohol helps to remove the chlorophyll in the leaves and make it easy to identify the starch present in the them.

The starch in plants formed in their leaves by photosynthesis can be identified using some analytical teste. For this the leaves have to placed inside a dark room for one day.

After that soak the leaf in hot water after heating it in alcohol. The alcohol degrades the chlorophyll, removing the leaf's green hue, while the hot water kills the leaf. One of the leaves will become blue-black and the other will turn reddish-brown when you apply iodine to them.

Iodine is an indicator that changes color from blue to black when starch is present. The leaf that was in the sun changes from green to blue-black, showing that it has been doing photosynthesis and making starch.

Find more on starch test:

https://brainly.com/question/5351497

#SPJ6

Answer:

e. the number of active motor units increases.

Explanation:

There is a direct relationship between the number of active motor units and the grip strength in a given scenario. For example, increase in the grip strength leads to increase in the number of active motor units. In the other-hand, the decrease in grip strength leads to the decrease in the number of active motor units.

Answer:

Magnetic poles

Explanation:

Magnetic poles are the regions where the magnet's force is strongest, one is the north pole and one is the south pole.

Answer:

48kg

Explanation:

Answer:

102.5N

Explanation:

Given that  a delivery truck travels along a level stretch of road with constant speed, most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the delivery truck by the air and the road. If the power developed by the engine is 4.12 hp, calculate the total friction force acting on the delivery truck (in N) when it is moving at a speed of 30 m/s. One horsepower equals 746 W

The power = 4.12 × 746 = 3073.52 W

Using the formula

Power = force × velocity

3073.52 = force × 30

Force = 3073.52 / 30

Force = 102.5 N

Since most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the delivery truck by the air and the road, therefore,

the total friction force acting on the delivery truck (in N) when it is moving at a speed of 30 m/s is 102.5 N

Answer:

[tex]\huge\boxed{T = 0.025\ seconds}[/tex]

Explanation:

Given:

Frequency = f = 40 Hz

Required:

Time period = T = ?

Formula:

[tex]\sf T = 1 / f[/tex]

Solution:

T = 1 / 40

T = 0.025 seconds

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

athletic

Explanation:

because internet system has been down since we were in few days

Answer:

the required frequency of waves is 2.066 Hz

Explanation:

Given the data in the question;

μ = 1.50 kg/m

T = 6000 N

Amplitude A = 0.500 m

P = 2.00 kW = 2000 W

we know that, the average power transmit through the rope can be expressed as;

p = [tex]\frac{1}{2}[/tex]vμω²A²

p = [tex]\frac{1}{2}[/tex]√(T/μ)μω²A²

so we solve for ω

ω² = 2P / √(T/μ)μA²

we substitute

ω² = 2(2000) / √(6000/1.5)(1.5)(0.500)²

ω² = 4000 / 23.71708

ω² = 168.65

(2πf)² = ω²

so

(2πf)² = 168.65

4π²f² = 168.65

f² = 168.65 / 4π²

f² = 4.27195

f = √4.27195

f = 2.066 Hz

Therefore, the required frequency of waves is 2.066 Hz

Answer:

Q = 636.48 J

Explanation:

Given that,

The mass of gold, m = 0.052 kg

The temperature increase from 30°C to 120°C.

The specific heat of gold is 136  J/kg °C.

We need to find the heat needed to warm the gold. The formula for heat needed is given by :

[tex]Q=mc\Delta T\\\\Q=0.052\times 136\times (120-30)\\\\Q=636.48\ J[/tex]

So, 636.48 J of heat is needed to warm gold.

Answer:

B

Explanation:

The centripetal force keeps an object moving in a circular path. Therefore option (B) is correct.

A centripetal force can be described as a force that makes a body follow a curved path and its direction is orthogonal to the motion of the body. Gravity offers the centripetal force causing astronomical orbits.

The centripetal force is directed perpendicular to the direction of the displacement of an object. It always acts towards the center of the circle on an object moving in a circular path. For example, When spinning a ball on a string, the tension on the rope pulls the object toward the center.

The Centripetal Force can be described as the product of mass and velocity squared, divided by the radius.

F = mv²/r

Where F is the Centripetal force, m is the mass, r is the radius of the circle and v is the velocity of the object.

Learn more about Centripetal force, here:

https://brainly.com/question/14249440

#SPJ2

Answer:

A toaster usually takes in electrical energy.

Two types of energy are created.

In the first step, all of the input electrical energy is transformed into heat energy. That heat goes first into the coils or heating elements.

The heating elements get hot and glow.

The hot elements then transfer thermal energy (heat energy) into the air inside the toaster.

Explanation:

Answer: electrical energy

Explanation: An electric toaster takes in electrical energy from the power outlet and converts it into heat, very efficiently. If you want your toast to cook quickly, you need a toaster that radiates as much heat as possible each second onto your bread. hope this helps. Can u pls give me brainliest

Answer:

72m

12m x 6s=72m

there ya go

Answer:

7.5 m/s².

Explanation:

From the question given above, the following data were:

Mass (m) of object = 0.6 Kg

Force of friction (Fբ) = 1.5 N

Acceleration (a) =?

Next, we shall determine the force of gravity on the object. This can be obtained as follow:

Mass (m) of object = 0.6 Kg

Acceleration due to gravity (g) = 10 m/s²

Force of gravity (F₉) =?

F₉ = mg

F₉ = 0.6 × 10

F₉ = 6 N

Next, we shall determine the net force acting on the object. This can be obtained as follow:

Force of friction (Fբ) = 1.5 N

Force of gravity (F₉) = 6 N

Net force (Fₙ) =?

Fₙ = F₉ – Fբ

Fₙ = 6 – 1.5

Fₙ = 4.5 N

Finally, we shall determine the acceleration of the object. This can be obtained as follow:

Mass (m) of object = 0.6 Kg

Net force (Fₙ) = 4.5 N

Acceleration (a) of object =?

Fₙ = ma

4.5 = 0.6 × a

Divide both side by 0.6

a = 4.5 / 0.6

a = 7.5 m/s²

Therefore, the acceleration of the object is 7.5 m/s²

Answer:

the answer is c, 3m......

When a train is moving at the speed of 30 m/s. The wavelength of the wave is 3 m.

Wavelength is the characteristic of the wave which represents the distance between the adjacent crest or trough of the wave.

Given is the speed of the train of waves 30 m/s and frequency of the wave is 10 Hz, then the wavelength is related to speed and wavelength as

v = fλ

30 = 10 × λ

λ = 3 m

Thus, the wavelength of the wave is 3 m.

Learn more about wavelength.

https://brainly.com/question/13533093

#SPJ2

using hooke's relation

F = K . d

50N = k . 0.09m

k = 50N / 0.09m

k = 5555.56 N/m

Calculating the potential energy of the spring

Ep = 1/2 k . x²

Ep = 1/2 (5555.56 N/m) (0.09m)²

Ep = 22.5 Joules

the spring constant? =

k =  5555.56 N/m

potential energy of the spring?​

Ep = 22.5 Joules

The Potential energy of the spring is 2.25 J

This is the energy stored in spring due to its elastic properties.

To calculate the potential energy of the spring, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, The Potential energy of the spring is 2.25 J

Learn more about the potential energy of spring: https://brainly.com/question/3510901

Answer:

256 N

Explanation:

formula of centripetal force = mv²/r

m= 2kg

v= 8m/s

r= 0.5m

mv²/r = 2×8²/0.5 = 256N

The gravitational acceleration of a planet is proportional to the planet's mass, and inversely proportional to square of the planet's radius.

So when you stand on the surface of this particular planet, you feel a force of gravity that is

(1/2) / (3²)

of the force that you feel on the surface of the Earth.

That's (1/18) as much as on Earth.

The acceleration of gravity there would be about 0.545 m/s².  

This is about 12% less than the gravity on Pluto.

Answer:

The speed and direction of the third fragment are 2 meters per second and 54.316º, respectively.

Explanation:

The object is not under the influence of any external force, meaning that Principle of Momentum Conservation to calculation of the velocity of the third fragment:

[tex](m_{1}+m_{2}+m_{3})\cdot \vec {v}_{o} = m_{1}\cdot \vec v_{1} + m_{2}\cdot \vec v_{2} + m_{3}\cdot \vec v_{3}[/tex] (1)

Where:

[tex]m_{1}[/tex], [tex]m_{2}[/tex], [tex]m_{3}[/tex] - Masses of the first, second and third fragments, in kilograms.

[tex]\vec v_{o}[/tex] - Initial velocity of the object, in meters per second.

[tex]\vec v_{1}[/tex], [tex]\vec v_{2}[/tex], [tex]\vec v_{3}[/tex] - Velocities of the first, second and third fragments, in meters per second.

If we know that [tex]m_{1} = 0.5\,kg[/tex], [tex]m_{2} = 1.3\,kg[/tex], [tex]m_{3} = 1.2\,kg[/tex], [tex]\vec v_{o} = (0,0)\,\left[\frac{m}{s} \right][/tex], [tex]\vec v_{1} = \left(-2.8, 0\right)\,\left[\frac{m}{s} \right][/tex] and [tex]\vec v_{2} = \left(0,-1.5\right)\,\left[\frac{m}{s} \right][/tex], the velocity of the third fragment is:

[tex](-1.4,0) + (0,-1.95) + 1.2\cdot \vec v_{3} = (0,0)[/tex]

[tex]1.2\cdot \vec v_{3} = (1.4,1.95)[/tex]

[tex]\vec v_{3} = (1.167, 1.625)\,\left[\frac{m}{s} \right][/tex]

The speed of the third fragment is the magnitude of the result found above:

[tex]v_{3} = 2\,\frac{m}{s}[/tex]

And the direction of the third fragment is:

[tex]\theta_{3} = \tan^{-1} \left(\frac{1.625}{1.167}\right)[/tex]

[tex]\theta_{3} \approx 54.316^{\circ}[/tex]

The speed and direction of the third fragment are 2 meters per second and 54.316º, respectively.

Explanation:

the movement of the nut is 20Nm

Answer:

(a) 8.85×10⁻³ minutes

(b) 4.24×10¹⁹ electrons

Explanation:

(a) Using,

Q = it............................. Equation 1

Where Q = quantity of charge, i = current, t = time.

Make t the subject of the equation

t = Q/i............................. Equation 2

Given: Q = 6.8×10⁰ C, i = 12.8 A

Substitute these values into equation 2

t = 6.8×10⁰/12.8

t = 8.85×10⁻³ minutes

(b) n = Q/(1.602×10⁻¹⁹)................. Equation 3

Where n = number of electrons.

Given: Q = 6.8×10⁰ C

Substitute into equation 2

n = 6.8×10⁰/1.602×10⁻¹⁹

n = 4.24×10¹⁹ electrons

(a) The time taken by the charge to flow from the drier will be [tex]\d8.85[/tex]×[tex]\d10^{-3}[/tex]minutes

(b) Amount of the electrons in the charge will be  [tex]\d4.24[/tex]×[tex]\d10^{19}[/tex] electrons

As we know Q = IT

Where Q = quantity of charge, i = current, T = time.

From the above equation

                    T= Q/I.

Given: Q = [tex]6.8\times\d10^{0}[/tex] C, i = 12.8 A

Substitute these values  

T=  [tex]6.8[/tex]×[tex]\d10^{0}[/tex] /12.8

T =  [tex]8.85[/tex]×[tex]\d10^{-3}[/tex] minutes

Now the number of the electrons present in the charge will be

n = Q/( [tex]1.602[/tex]×[tex]\d10^{-19}[/tex])

Where n = number of electrons.

Given: Q = [tex]6.8\times\d10^{0}[/tex] C

Substitute Value of Q  

n =  [tex]6.8\times\d10^{0}[/tex]/ [tex]1.602\times\d10^{-19}[/tex]

n = [tex]4.24\times\d10^{19}[/tex] electrons

Thus

(a)The time taken by the charge to flow from the drier will be [tex]\d8.85[/tex]×[tex]\d10^{-3}[/tex]minutes

(b)Amount of the electrons in the charge will be  [tex]\d4.24[/tex]×[tex]\d10^{19}[/tex] electrons

To know more about electric charge follow

https://brainly.com/question/14372859

Answer:

true

Explanation:

force or powerbecause he pushes a disk

Answer:

a place where two bones come together is known as a join

Answer:

Hey mate.....

Explanation:

This is ur answer....

Joints – A place in the body where bones come together. Non-Moveable Joints (sometimes called fixed or fibrous) – A place in the body where two or more bones come together but do not move.

Hope it helps!

mark me brainliest plz....

Follow me! :)

Answer:

materials that allow electricity to pass through them are called conductors, some examples of conductors are many metals, such as copper, iron and steel.

Answer:

Protists are difficult to characterize because of the great diversity of the kingdom. These organisms vary in body form, nutrition, and reproduction. They may be unicellular, colonial, or multicellular.

Answer:

There are many varying characteristics and exceptions to each type of protist.

They have been previously categorized based on what they are not

Recent studies show that protists have not descended from one common ancestor.

Explanation:

its right i took test :)

Answer:

The movement of Sun and moon

Explanation:

When the sun rise.it is am and when it sets .it is pm.