if the mercury in a barometer raises 15.5 centimeters due to a change in ambient pressure, what is the corresponding change in pressure in atm?

The required mass of NH3 is 9.18g when the reaction between nitrogen and hydrogen to form ammonia is carried out in a flask containing 30.5 g of N2 and 8.65 g of H2.

Given the mass of N2 (m1) = 30.5g

The mass of H2 (m2) = 8.65g

Nitrogen and hydrogen react to generate ammonia as follows:

[tex]N2 + 3H2 ---- > 2NH3[/tex]

The molar mass of nitrogen (N) = 28g/mole

The molar mass of hydrogen (H) will be = 2g/mole

You can infer from the process that for every one mole of nitrogen gas involved, three moles of hydrogen gas will be consumed, and one mole of ammonia will be produced.

moles of nitrogen used = m1/N = 30.5/28 = 1.08

moles of hydrogen used = m2/H = 8.65/2 = 4.325

Here, Nitrogen acts as the limiting reagent.

The molar mass of NH3 (ammonia) = 17g/mole

So, the mass of NH3 required = (1.08/2)x 17 = 9.18g

To learn more about nitrogen click here https://brainly.com/question/16711904

#SPJ4

Between the two strands of DNA, a hydrogen bond (H-bond) holds the nitrogen bases together.

What is a chemical bond?

An enduring attraction between atoms or ions known as a chemical bond is what allows molecules and crystals to form. The bond may be created by the sharing of electrons in covalent bonds or by the electrostatic attraction of two oppositely charged ions, as in ionic bonds.

The two nitrogenous bases are joined by two hydrogen bonds. One of the hydrogen bonds is created between the oxygen atom of the keto group at C-4 of thymine and one of the amino group's hydrogen atoms at C-6 of adenine. The adenine's nitrogen atom at position 1 and the hydrogen atom connected to N-3 form another bond. DNA's double helix structure depends on the hydrogen bonds between adenine and thymine. They can be broken at high temperatures because they are not particularly strong bonds.

Because the breakage of the two hydrogen bonds between A and T requires less energy than the breakage of the three hydrogen bonds between G and C at G-C rich sites, the beginning of DNA replication and transcription frequently occurs at A-T rich sites.

To learn more about nitrogenous base pairs, click on the below link:

https://brainly.com/question/1550735

#SPJ4

2.9 g of  mass of Zn  can be produced in the reaction

The mass of ZnCl2 that can be produced in a reaction depends on the stoichiometry of the reaction. If the original sample of Zn had a mass of 1.4 g, we can use the balanced chemical equation for the reaction to determine how much ZnCl2 can be produced.

For example, if the reaction is Zn + HCl -> ZnCl2 + H2, the stoichiometry of the reaction is 1:1, meaning that for every mole of Zn, 1 mole of ZnCl2 can be produced. We can use the molar mass of Zn (65.38 g/mol) to convert the mass of Zn to moles, and then use the stoichiometry to calculate the mass of ZnCl2.

It is important to note that the actual amount of ZnCl2 produced may be different from the theoretical amount due to factors such as incomplete reaction, impurities, and loss of product during purification. Additionally, the molar mass of ZnCl2 should be used to convert moles to mass for the final answer.

Learn more about mass:

brainly.com/question/19694949

#SPJ4

The modern version of cell theory shows that cell contain hereditary material which is DNA.

DNA is a hereditary material which is present in human beings as well as all other living organisms.  Every cell which is present in an organism's body has DNA  which is the same. Most of the DNA is situated in the cell's nucleus  and small amount of it can be found in the cell's mitochondria as well.

Information which is stored in DNA is stored as codes made up of four chemical bases namely, adenine, thymine , cytosine and guanine.Human DNA consists of 3 billion bases .The order of the bases determines information which is required for building and maintaining an organism.

Learn more about DNA,here:

https://brainly.com/question/30006059

#SPJ1

Answer:The mass of phosphorus in 75.

0 g of calcium monohydrogen phosphate is 32.0 g.

Explanation:

This is because calcium monohydrogen phosphate is a compound that is composed of calcium cations (Ca2+) and monohydrogen phosphate anions (H2PO4-). The chemical formula for this compound is Ca(H2PO4)2. Since phosphorus has an atomic weight of 31 g/mol, and calcium monohydrogen phosphate contains two phosphorus atoms for each mole, the mass of phosphorus in 75.0 g of calcium monohydrogen phosphate is 32.0 g.

A) Versatility in chemical reactions, B) Ability to form strong covalent bonds, C) Ability to bond with a variety of other elements

Carbon is the central component of organic compounds due to its unique chemical properties. Carbon has four valence electrons, which allows it to form strong covalent bonds with other elements, including hydrogen, oxygen, nitrogen, and more. This versatility in bonding gives carbon the ability to form a wide variety of complex molecular structures, making it the backbone of all known forms of life. Additionally, carbon has a unique ability to bond with a variety of other elements, which gives it the ability to form a diverse range of functional groups that can participate in a wide range of chemical reactions. These properties make carbon the central component of organic compounds, the building blocks of life.

Learn more about covalent bonds here:

https://brainly.com/question/10777799

#SPJ4

The label indicate that ne tablespoon of mayonnaise contains more energy than one tablespoon of ketchup because it contains high amounts of fat.

Calories are the amount of energy obtained from food and drink which is then used by the body for daily activities. Mayonnaise is a sauce made from eggs and vegetable oil, so it has high fat and high calories. Because in 1 gram of fat there are 9 kcal. which means fat is high in calories. While in 1 tablespoon there are 57 calories in Mayonnaise.

Ketchup or tomato sauce can be made from fresh tomatoes or from tomato paste mixed with various other spices. Therefore tomato sauce only contains vitamins A and C from tomatoes and does not contain fat and is low in calories. In one tablespoon there are 15 calories in ketchup or tomato sauce.

Learn more calories at:

https://brainly.com/question/15526391

#SPJ4

The primary responsibility for making sure that safety policies are being followed in the lab is by your TA.Students can discover methods employed by scientists in their field and get hands-on experience with course content through labs.

You must evaluate the requirements for the experiment with your supervising professor as a lab TA, create concise explanations, and pose questions to get students thinking. Additionally, it is your duty to guarantee adherence to safety regulations.

When you are directly in charge of 25–30 laboratory students' health and wellbeing, safety is the most crucial concern. You should show correct lab methods over the first few weeks of the quarter, including decanting and mixing liquids, handling glassware, setting up a workspace, utilizing burners, and using additional tools like gloves, goggles, face shields, etc.

To know more about professor visit

https://brainly.com/question/23107989

#SPJ4

The molar mass of the substances having hydrogen will have mass of 1.01 u present in them.

Molar mass of a compound or a molecule is defined as the mass of the elements which are present in it.The molar mass is considered to be a bulk quantity not a molecular quantity. It is often an average of the of the masses at many instances.

The molecular mass and formula mass are used as synonym for the molar mass.It does not depend on the amount of substance which is present in the sample.It has units of gram/mole.

Molar masses of an element are given as relative atomic masses while that of compounds is the sum of relative atomic masses which are present in the compound.

Learn more about molar mass,here:

https://brainly.com/question/12127540

#SPJ1

A single electron is present in the valence shell of sodium shown.

What is a valence shell?

In chemistry and physics, the valence electron is an electron that is part of the outer shell of an atom. When the outer shell is open, the valence electron can participate in the formation of a chemical bond. Each atom in a bond contributes a valence electron and forms a common pair in a single covalent bond. The valence shell of an atom refers to its outermost orbit or shell. These electrons are necessary for creating bonds between atoms. It can be filled whole or in part.

So, as you can see from the diagram, we see that there is only one electron in the valence shell.

To learn more about Valency, here

brainly.com/question/12744547

#SPJ1

The reaction of potassium in water is similar to that of sodium in water, but more violent because Potassium is a very reactive metal even more than sodium as it is present below the sodium in periodic table.

As we go down the group in the periodic table, size of the elements increases but valence electrons remain same. This leads to decrease in ionization energy and hence electron can easily be removed and metal will be more reactive.

Therefore, The reaction of potassium in water is similar to that of sodium in water, but more violent because Potassium is a very reactive metal.

Learn more about Modern Periodic table, here:

https://brainly.com/question/14263046

#SPJ2

The sulfuric acid has a molarity of 0.46 M.

Molarity: What is it?

The number of moles of solute per liter of the given solution is measured using this unit of concentration. We must first determine how many moles of sulfuric acid were neutralized by the sodium hydroxide solution in order to calculate the molarity of the sulfuric acid solution. Sulfuric acid and sodium hydroxide react as follows:

Na2SO4 + 2H2O = NaOH + H2SO4

The number of moles of sodium hydroxide and sulfuric acid are equal because one mole of sodium hydroxide reacts with one mole of sulfuric acid.

We can figure out how many moles of sodium hydroxide there are since we know the solution's volume and concentration:

NaOH has a molecular weight of 16.08 moles (12.0 mL x 1.34 M).

The moles of sodium hydroxide can then be used to calculate the moles of sulfuric acid in the reaction by dividing the moles of sodium hydroxide by the stoichiometric coefficient (1) of sulfuric acid:

16.08 moles of H2SO4 are equal to 1.05 moles of NaOH.

Finally, we can use the volume of the sulfuric acid solution and the number of moles of sulfuric acid.

To know more about sulfuric acid, visit:

brainly.com/question/1107054

#SPJ4

Answer:

107.8682U is the molar mass of ag

Carbohydrates are polymers formed of structural units called monosaccharides.

Monosaccharides, often known as simple sugars, are the most fundamental forms of sugar and the monomers from which all other types of carbohydrates are constructed. Typically, these substances are colorless, soluble in water, and crystalline in appearance. Only certain monosaccharides, despite their common name (sugars), have a flavor that may be described as sweet.

The chains of the most common monosaccharides are unbranched and single-bonded, and they comprise anywhere from three to six carbon atoms. Glucose (also known as dextrose), fructose, galactose, xylose, and ribose are a few examples of monosaccharides. Monosaccharides are the fundamental components from which disaccharides such as sucrose (table sugar) and polysaccharides are produced (such as cellulose and starch).

To learn more about monosaccharides, click here:

https://brainly.com/question/14308313

#SPJ4

Answer: Ketone

Explanation:

The drawing of Lewis structures for the following polyatomic ions are given attachment:

a. NH₄⁺

b. SO₄²⁻

How to draw Lewis structure?

Step 1 :- find the total number of valence electrons of the combining atoms .For anion , the total negative charge is added to and for cation, the total positive change is subtracted from the number of valence electrons .

total number of valance electrons = 6 + 6 × 4 +2 = 32

step 2 :- The least electronegative atom is placed at the centre, surrounded by highly electronegative atoms .

S occupies central atom surrounded by O - atoms. because

step 3 :- Draw single bond among each atom, and then complete octet of surrounding atoms followed by central atom by assigning lone pair, double bond or triple bond.

What is the Lewis structure?

To know more about the Lewis structure, click the link given below:

https://brainly.com/question/20300458

#SPJ1

Aluminum wiring can be a fire hazard because it can oxidize, or combine with oxygen. Therefore, 4moles of aluminium react with 3 moles of oxygen.

Aluminum (Al), also written aluminium, is a chemical element that is a light silvery white metal in Periodic Group 13 (IIIa, or the boron group). Aluminum is the most common nonferrous metal and the most prevalent metallic element in the Earth's crust.

Aluminum is never found in its metallic form in nature due to its chemical activity, but its compounds are found to varying degrees in practically all minerals, flora, and animals.

4Al + 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2Al[tex]_2[/tex]O[tex]_3[/tex]

mole of oxygen =3 moles

the mole ratio between aluminium and oxygen is 4:3.

moles of aluminium = 4moles

Therefore, 4moles of aluminium react with 3 moles of oxygen.

To learn more about aluminium, here:

https://brainly.com/question/23755698

#SPJ1

The minimum number of polarizing filters required to achieve a configuration such that the detector only detects 6% of the initial photons would be two.

Polarizing filters are used to transmit light waves that are polarized in a specific direction and block light waves that are polarized in a perpendicular direction. When two polarizing filters are placed in series, the intensity of the light that passes through both filters is proportional to the product of the transmissions of each filter.

Let's assume that the transmission of each polarizing filter is represented by T. If we want the detector to only detect 6% of the initial photons, we can write the equation as follows:

0.06 = T₁ × T₂

Since T represents the transmission of each polarizing filter, it must be a value between 0 and 1. To minimize the number of polarizing filters required, we want T₁ and T₂ to be as close to 1 as possible. So, we can choose T₁ and T₂ to be equal to 0.2:

0.06 = 0.2 × 0.2

Therefore, the minimum number of polarizing filters required to achieve a configuration such that the detector only detects 6% of the initial photons is two.

To know more about polarizing filters here

https://brainly.com/question/13963189

#SPJ4

--The given question is incomplete, the complete question is

"Using only polarizing filters (the second element under the polarization section) create a configuration such that the detector only detects 6% of the initial photons. what is the minimum number of polarizing filters required to achieve this?"--

A saturated fatty acid that is composed of 18 carbons is slightly less hydrophobic than a hydrocarbon that is composed of 18 carbons because the fatty acid has at least one double bond in its carbon chain, which reduces its hydrophobicity.

Hydrophobic is a term used to describe a substance or material that repels water. It is a physical property that is caused by molecules that have a strong aversion to water molecules. Hydrophobic molecules are usually characterized by having an uncharged, nonpolar surface, which makes them unable to form hydrogen bonds with water molecules. Common substances that are hydrophobic include oil, wax, and other organic compounds.

The double bond adds a polar group to the molecule, which can interact with water molecules and partially dissolve the fatty acid in water. Hydrocarbons, on the other hand, are composed entirely of non-polar C-C and C-H bonds, which are unable to interact with water, making them more hydrophobic.

To learn more about hydrophobic
https://brainly.com/question/30437621
#SPJ4

The molarity of this KOH solution is 14.03 m.

Given that

KOH solution of 44.0%

which means the mass is 44g KOH in 100g

of solution

mass of solvent = 100-44 g = 56g

conveting to kg 56/1000 = 0.056kg

Number of mole of KOH = 44 / 56 = 0.7857m

=0.7857 mol

morality = no. of mole of KOH / mass of solvent

= 0.7857 / 0.056

= 14.03m

Molarity is a unit of concentration that describes the amount of a solute, or the substance being dissolved, in a solution relative to the amount of solvent, or the substance that dissolves the solute. It is expressed as the number of moles of solute per liter of solution and is denoted by the symbol "M". Molarity is widely used in chemistry to describe the concentration of solutions, especially in reactions involving solutions.

The molarity of a solution can be calculated using the formula: moles of solute ÷ liters of solution. Knowing the molarity of a solution enables scientists and technicians to control the reaction conditions and predict the outcome of a reaction.

To learn more about molarity visit here:

brainly.com/question/8732513

#SPJ4

The mole fraction of I₂ in the solution made by dissolving 111 g of I₂ in 245 g of hexane, C₆H₁₄ is 0.134.

What does mole fraction mean?

The number of moles of a solute to the sum of all the moles of the solute and the solvent in a solution is known as the mole fraction. We must first determine the total moles of I2 and hexane in the solution in order to calculate the mole fraction of I2 therein.

Grams to moles can be changed using the molar mass. Hexane has a molar mass of 86.18 g/mol while I2 has a molar mass of 253.8 g/mol.

There are: moles of I2 in the solution.

n_I2=111 g/253.8 g/mol = 0.44 mol

There are: moles of hexane in the mixture.

n_hexane = 245 g/86.18 g/mol

n_total = n_I₂ + n_hexane = 0.44 mol + 2.83 mol = 3.27 mol

Finally, the mole fraction of I₂ in the solution is the ratio of the moles of I₂ to the total mole:

x_I₂ = n_I / n_total = 0.44 mol / 3.27 mol = 0.134

So, the mole fraction of I2 in the solution is 0.134.

To know more about molar mass, visit:

brainly.com/question/12127540

#SPJ4

To calculate the mole fraction of the solvent (water) in the solution, we need to first calculate the number of moles of each component in the solution.Here, the mole fraction of the solvent (water) in the solution is approximately 0.963

The number of moles of KClO3 can be calculated as follows:

n(KClO3) = mass ÷ molar mass = 77.9 g ÷ 122.55 g/mol = 0.636 mol

The number of moles of H2O can be calculated as follows:

n(H2O) = mass ÷ molar mass = 291 g ÷ 18.02 g/mol = 16.17 mol

The total number of moles in the solution can be calculated as the sum of moles of KClO3 and H2O:

n(total) = n(KClO3) + n(H2O) = 0.636 mol + 16.17 mol = 16.81 mol

The mole fraction of the solvent (water) can be calculated as follows:

X(H2O) = n(H2O) ÷ n(total) = 16.17 mol ÷ 16.81 mol = 0.963

The mole fraction of the solvent (water) in the solution is approximately 0.963

learn more about moles here:

https://brainly.com/question/26416088

#SPJ4

The traits that the offspring got were taken from the parents.

Offspring get traits from their parents through the process of inheritance. Traits are determined by genes, which are segments of DNA that contain the instructions for building and maintaining an organism's body and traits.

Each parent contributes half of their genes to their offspring through their gametes, which are reproductive cells such as sperm and eggs. When a sperm fertilizes an egg, the resulting zygote has a complete set of genes from both parents.

Learn more about traits:https://brainly.com/question/1463051

#SPJ1

The balanced equation for the beta emission decay of iodine-126 is as follows:

Decay process in nuclear reactions refers to the spontaneous transformation of an unstable nucleus into a more stable one, emitting one or more particles or radiation in the process.

The types of decay include

This process results in a decrease in the total number of protons and neutrons in the nucleus and a decrease in the total atomic number and mass number of the nucleus.

In the equation, the beta particle is an electron emitted from the nucleus during the decay process.

Learn more about beta emission at:

https://brainly.com/question/16409346

#SPJ1

Bimolecular nucleophilic substitution (SN2) reactions are concerted reactions in which both the nucleophile and the substrate are involved in the rate-limiting step. Bonds are broken and new bonds are formed in a single step thanks to the coordinated nature of this reaction. In order to comprehend this reaction, it is essential to examine the transition state, which replicates the concerted rate-limiting step.

What is Hammond postulate?

The geometrical structure of the transition state of an organic chemical reaction is described by Hammond's postulate (also known as the Hammond-Leffler postulate), a physical organic chemistry hypothesis.

According to the postulate, which George Hammond first put forth in 1955, if two states, such as a transition state and an unstable intermediate, happen concurrently during a reaction process and have nearly the same amount of energy, their interconversion will only cause a slight reorganization of molecular structures.

Bimolecular nucleophilic substitution (SN2) reactions are concerted reactions in which the rate-limiting step involves both the nucleophile and the substrate. Due to the concerted nature of the reaction, the bonds are broken and new bonds are formed all in one step. It is crucial to examine the transition state, which resembles the concerted rate-limiting step, in order to interpret this reaction. The halide (L) bond is broken while the nucleophile forms a new bond with the carbon in the "Depiction of SN2 Reaction" figure.

To learn more about charge to be distributed, click on the below link:

https://brainly.com/question/14799724

#SPJ4

41.7% is the percentage by mass of hydrogen (H) in lithium hydroxide (LiOH). The solution mixture is frequently defined in terms of mass percentage.

The mass percent might be used to denote a degree. Furthermore, it defines the element during a specific mixing. The solution mixture is frequently defined in terms of mass percentage. It represents the amount of solute contained in a mass m of solution.

The quantity of solutes can be stated in terms of mass or moles. We will study the percent by mass formula with numerous solved numerical examples in this post.

Mass percent = (component’s mass ÷ total mass) x 100%

                      = (1/ 23.95)x 100%

                     = 41.7%

Therefore, 41.7% is the percentage by mass of hydrogen (H) in lithium hydroxide (LiOH).

To learn more about percentage by mass, here:

https://brainly.com/question/28998211

#SPJ1

The jeweler must add 15 grams of silver to the alloy in order to reduce the gold content to 72%.

Given:

Upon melting all the rings, the weight of the alloy material will be 12 * 5 = 60 grams.

This alloy contains 10% silver and 80% gold. The jeweler then going to add melted silver so the alloy has 72% gold and 28% silver. Therefore, we can be sure that the amount of gold before mixing is the SAME as the amount of gold after mixing.

90% of 60 grams = 72% of (60 + x) grams

0.90 * 60 = 0.72 (60 + x)

           54 = 43.2 + 0.72x

       0.72x = 54 / 43.2

               x = 15

That means the jeweler must add 15 grams of silver to the alloy in order to reduce the gold content to 72%.

Learn more about alloy content at https://brainly.com/question/11045413

#SPJ4

The rapid destruction of tropical rain forests is harmful because it reduces habitats for animals and plants, leading to a decrease in biodiversity.

It can also cause climate change due to reduced carbon absorption and an increase in heat-trapping greenhouse gases, resulting in more extreme weather patterns.  The destruction of tropical rain forests is a serious concern, with millions of acres destroyed worldwide each year. This destruction can be attributed to many causes, such as illegal logging, wildfires, over-farming and over-grazing. As a result, essential services and resources provided by the forests, such as clean water and soil health, are diminished. Additionally, the trees themselves can store large amounts of carbon, which is released into the atmosphere when they are burned or cut down. This further contributes to climate change, as carbon dioxide is a major heat-trapping greenhouse gas. Furthermore, deforestation reduces the habitats of many animals, leading to a decrease in biodiversity.

Learn more about destruction here:

brainly.com/question/1165953

#SPJ4

To calculate the mass percent of the acid in the original solution, you must first calculate the moles of acid used in the reaction. Since oxalic acid has a molar mass of 90.03 g/mol, 13.1 g of the acid is equivalent to 0.145 moles of acid.

Then, you can use the moles of acid to calculate the moles of base required to neutralize it. Since 28.05 ml of 0.103 M base was used, this is equivalent to 0.0288 moles of base. Since the reaction involves a 1:2 mole ratio of acid to base, the moles of acid used was twice the moles of base, or 0.145 moles.

Finally, you can calculate the mass percent of the acid in the original solution by dividing the mass of the acid used (13.1 g) by the total mass of the solution (13.1 g + 28.05 ml of 0.103 M base). This gives a mass percent of 32.2%.

Learn more about oxalic acid:

https://brainly.com/question/14897549

#SPJ4

After eight weeks, 1/4 of the sample of radioactive phosphorus will remain radioactive.

Radioactive is the process of emitting particles and radiation from an atom, which occurs naturally in some materials and can be induced in others. When atoms decay, they emit particles and energy in the form of gamma rays, alpha particles, and beta particles. Radioactive materials can be found in nature, either from natural sources such as uranium, or from human activities such as nuclear power plants. Radioactive materials can be used in a variety of ways, such as in medical treatments, energy production, and industrial applications. Radioactive materials can also be hazardous if they are not managed or contained properly, as they can cause damage to human health and the environment.

This is because the half-life of 32P is two weeks, meaning that after two weeks, half of the material will have decayed. Therefore, after four weeks, only 1/4 of the material will remain radioactive, and after eight weeks, 1/4 of the material will still be radioactive.

To learn more about radioactive
https://brainly.com/question/25750315
#SPJ4