Answer:
v = 44.27 m / s
Explanation:
This is an exercise in kinematics since they ask the maximum speed of the train
v² = v₀² + 2 a x
a train departs with zero initial velocity
v² = 2 a x
v = √ 2ax
calculate
v = √ (2 1.21 810)
v = 44.27 m / s
in this solution we have assumed that the train uses the entire distance with acceleration
which solid state component allows a mobile phone to store data even if the battery is removed
Answer:
Capacitor
Explanation:
Capacitor ; A capacitor is a passive two-terminal electrical component that can store energy in an electric field electrostatically. It works as a small rechargeable battery that stores electricity. However, unlike a battery, it can charge and discharge in the split of a second. Capacitors are widely used to build different types of electronic circuits.
zeros are always considered significant digits when they are to the left of the decimal point True or False
Answer:
false
Explanation:
because they does'nt Work for anything, are like they are not there
Answer:
False
Explanation:
The rules for significant figures are:
Non-zero digits are always significant.Zeros between significant digits are also significant.Trailing zeros are significant only after a decimal point.A zero before a decimal point is only significant if there's a non-zero digit before it.
For example, in the number 10.5, the zero is significant, because it is between significant digits.
But in the number 0.5, the zero is not significant.
The moon Umbriel orbits Uranus (mass = 8.68 x 1025 kg) at a distance of 2.66 x 108 m. What is Umbriel's orbital speed?
Answer:
the orbital speed of umbriel is 16,800 km/h
Explanation:
The computation of the orbital speed is shown below
According to the question the Data provided in the question
Uranus mass = 8.68 × 10^25 kg
Distance = 2.66 × 10^8 m
Based on the above information, the orbital speed of Umbriel is
[tex]V = \sqrt{\frac{GM}{R} } \\\\ = \sqrt{\frac{((6.673e-11)(8.68e25)}{2.66e8} }[/tex]
V = 4666 m/s
= 16,800 km/h
Hence, the orbital speed of umbriel is 16,800 km/h
Therefore it can be calculated by applying the above formula
Answer: 4665
Explanation: I got it right after on acellus
What was the initial velocity of a robot that took 5 m to get to final velocity of 19 m/s at a rate of 3 m/s/s?
Answer:
4m/s
v=u+at
19=u+3*5
u=4m/s
What would most likely cause an accident if worn in a lab? short sleeves short hair long jewelry long pants
Answer:
Long jewelry
Explanation:
what are the abuses limitation and benefits of science (pls tell at least 5 each)
Answer: The generation of electricity using fossil fuels.e.g can lead to pollution which cause harm to human beings and environment.
At some times science and technology have been misused or abused by human beings.An example of abuse is the invention of and use of deadly weapons which are harmful to us and environment.
Explanation:
why a flying airplane has more kin etic energy than a flying insect
Explanation:
Airplanes have more kinetic energy because their bigger. A bug is a living thing well a airplane is not so it (the airplane) has all these machines and engines to make it go faster.
a group of students conducted several trials of an experiment to study forces and the acceleration they produce on a given object. the students decided to present the resulting data using a graph rather than a table.
which statement describes an advantage of presenting the data using a graph?
a. tables with many rows of data are not useful
b. tables cannot explicitly show the data from the investigation
c. graphs are more appealing than tables
d. graphs visually show the relationship between the variables under investigation
Answer:
d.
Explanation:
graphs visually show the relationship between the variables under investigation. Table of data shows the quantitative analysis while the graph shows the relationship between y-axis and x-axis. Both of them are important.
Potential energy is the energy of
Answer:
potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height.
Describe three ways in which you used energy earlier today.
Answer:
turning on the lights
using my phone
using the microwave
Doland is currently driving his car at 10 m/s. He sees Gooby and accelerates at 20 m/s2 for 2 seconds until he passes him to scare
him. How far did Doland drive during that time.
Answer:
[tex]60\; \rm m[/tex].
Explanation:
Refer to the velocity-time diagram attached. The displacement of an object over a period of time is equal to the area of the region between the velocity-time plot and the horizontal time axis. That is the case even if the velocity of the object is changing over time.
For the car in this question, the distance travelled in that two seconds should be equal to the trapezoid highlighted in green. That's the region bounded with:
on the top: the velocity-time function of this car, on the two sides: the start and end of the acceleration ([tex]\text{Time} = 0\; \rm s[/tex] and [tex]\text{Time} = 2\; \rm s[/tex],) as well as on the bottom: the horizontal time axis.The formula for the area of a trapezoid is:
[tex]\displaystyle \text{Trapezoid Area} = \frac{1}{2}\times \text{Height} \times (\text{Upper Base} + \text{Lower base})[/tex].
For the imaginary trapezoid on this velocity-time graph:
Height: [tex]\text{Time taken} = 2\; \rm s[/tex].Upper base and lower base: [tex]\text{Initial velocity} = 20\; \rm m \cdot s^{-1}[/tex] and [tex]\text{Final velocity} = 20\; \rm m \cdot s^{-1} + 2\; \rm s \times 20\; \rm m \cdot s^{-1} = 50\; \rm m \cdot s^{-1}[/tex].Therefore:
[tex]\begin{aligned}&\text{Displacement} \\ &= \text{Area of the imaginary trapezoid}\\ &= \frac{1}{2} \times 2\; \rm s \times \left(10\; \rm m \cdot s^{-1} + 50\; \rm m \cdot s^{-1}\right)\\ &= 60\; \rm m\end{aligned}[/tex].
A light beam with wavelength 500 nm is reflected constructively from a thin layer of oil having index of refraction 1.25. The oil floats on the top of water of index of refraction 1.33. What is the minimum thickness of the layer of oil
Answer:
t = 200 nm
Explanation:
It is given that,
Wavelength of a light beam is 500 nm
It is reflected constructively from a thin layer of oil having index of refraction 1.25.
The oil floats on the top of water of index of refraction 1.33.
We need to find the minimum thickness of the layer of oil. `
For constructive interference,
[tex]\dfrac{2nt}{\lambda}=m[/tex]
m is 1 for minimum thickness
n is refractive index of oil
t is thickness of layer of oil.
So,
[tex]t=\dfrac{m\lambda}{2n}\\\\t=\dfrac{1\times 500\times 10^{-9}}{2\times 1.25}\\\\t=2\times 10^{-7}\ m\\\\t=200\ nm[/tex]
So, the minimum thickness of the layer of oil is 200 nm.
Engine of vehicles are manufacturers on the principle of _____
Explanation:
As the principle, a mixture gas of the fuel and the air is compressed in the cylinder at first and the gas exploded by use of an ignition plug and generate the output power
Explanation:
Engine of vehicles are manufacturers on the principle of internal combustion engine
What displacement do I have if I travel 10 m E, then 6 m W, then 12 m E? A. 16 m E B. 28 m E C. 28 m D. 16 m
Answer:
16m E
Explanation:
displacement=10m E-6m W+12m E=16m E
A 1200 kg car is put into neutral and pushed by 2 students. The first student pushed the car forward with 200 N of force. The second student pushed with 250 N of force in the same direction. What is the acceleration the car experienced.
Explanation:
∑F = ma
200 N + 250 N = (1200 kg) a
a = 0.375 m/s²
A 1200 kg car is put into neutral and pushed by 2 students. The first student pushed the car forward with 200 N of force. The second student pushed with 250 N of force in the same direction, then the acceleration of the car would be 0.375 meters / second².
What is Newton's second law?Newton's Second Law states that The resultant force acting on an object is proportional to the rate of change of momentum.
As given in the problem if A 1200 kg car is put into neutral and pushed by 2 students. The first student pushed the car forward with 200 N of force. The second student pushed with 250 N of force in the same direction, then we have to find the acceleration of the car,
Acceleration of the car = 450 /1200
= 0.375 meters / second²
Thus, the acceleration of the car would be 0.375 meters / second².
To learn more about Newton's second law here, refer to the link;
brainly.com/question/13447525
#SPJ2
You find a micrometer (a tool used to
measure objects to the nearest 0.001 mm) that has
been badly bent. How would it compare to a new,
high-quality meterstick in terms of its precision? Its
accuracy?
Explanation:
A micrometer is a measuring device or an instrument which is used to measure very minute measurements very accurately and precisely. It is mathematical tool used to provide accurate measurement for any mechanical components.
Now, if the micrometer that I have found is badly bent, it would provide faulty or wrong measurements both in terms of precision and accuracy when compared to a high quality meter stick.
Two students are watching a person riding a skateboard up and down a ramp. Each student shares what they think about the energy of the skateboarder as they ride up and down the ramp. Elisa: I think the skateboarder has the more total energy at the top bottom of the ramp than the bottom of the ramp. Raymond: I think the skateboarder has the same total energy at all points on the ramp.
Answer:
Explanation:
We know that , If the frictional force on a system is zero , then the total energy of a system will be conserved.
By using energy conservation
KE₁ + U₁ = KE₂ + U₂
KE₁=Kinetic energy at location 1
U₁ =Potential energy at location 1
KE₂=Kinetic energy at location 2
U₂=Potential energy at location 2
Therefore, Raymond is thinking in a right way.
12. Prove that v' = u? + 2as.
Prove that v² = u² + 2as .
Solution:-From first equation of motion,
v = u + at
=> at = v - u
=> t = v - u / a
From the second equation of motion, we have
s = ut + 1/2at²
Putting the value of t in above equation , we get:
s = u ( v - u /a ) + 1/2 a ( v - u/a )²
s = uv - u² / a + a( v² + u² - 2uv / 2a²)
s = uv - u² / a + v² + u² - 2uv / 2a
s = 2uv - 2u² + v² + u² - 2uv / 2a
2as = v² - u²
Answer:
[tex] \boxed{ \boxed{ \orange{ \sf{see \: below}}}} [/tex]
Explanation:
[tex] { \underline{ \underline \bold{ \sf{ \blue{ {question \: }}}}}}[/tex]
[tex] \sf{ \bold{ \underline{ \: prove \: that \: {v}^{2} = {u}^{2} + 2as}}}[/tex]
[tex] \underline{ \underline{ { \bold{ \sf{ \purple{solution} }}}}}[/tex]
Let us assume a body moving with an initial velocity ' u '. Let it's final velocity be 'v' after a time 't' and the distance travelled by the body be 's'. We already have ,
[tex] \sf{v = u + at}[/tex] ⇒first equation of motion ( i )
[tex] \sf{s = \frac{u + v}{2} \times t}[/tex] ⇒second equation of motion ( ii )
Putting the value of t from ( i ) in the equation ( ii )
{ v = u + at
or , at = v - u
or, t = v-u / a }
[tex] \sf{s = \frac{u + v}{2} \times \frac{v - u}{a} }[/tex]
[tex] \sf{or \: s = \frac{ {v}^{2} - {u}^{2} }{2a} }[/tex]
[tex] \sf{or \: 2as = {v}^{2} - {u}^{2} }[/tex]
[tex] \sf{ \boxed{ \bold{ \: ∴ \: \: \: {v}^{2} = {u}^{2} + 2as}}}[/tex] ⇒ forth equation of motion
Hope I helped!
Best regards!!
What volume will be occupied by 20g of Copper if the density of Copper is 9.1g/ml?
Answer:
The volume of copper is 2.198 ml
Explanation:
Given;
mass of copper, m = 20 g
density of copper, ρ = 9.1 g/ml
Density is given by;
Density = mass / volume
Volume = mass / density
Volume = (20 g) / (9.1 g/ml)
Volume = 2.198 ml
Therefore, the volume of copper is 2.198 ml
What is the velocity of a worm moving 1 meter in 2 hours to the East?
Answer:
Velocity = 0.0001389 m/s
Explanation:
Given that the
Distance covered = 1 metre
Time taken = 2 hours
Convert the hour to second
1 hour = 60 × 60 = 3600
2 hours = 2 × 3600 = 7200
What is the velocity of a worm moving 1 meter in 2 hours to the East?
Velocity can be referred as speed.
Velocity = distance/ time
Velocity = 1/7200
Velocity = 0.0001389 m/s
when the piston of a fountain pen with a nib is dipped into ink and and the air is released by pressing it, the ink fills in the pen. why . give reason
Answer: Please find the answer in the explanation
Explanation: According to the Newton 3rd law of motion which state that;
In every action, there will be equal and opposite reaction.
when the piston of a fountain pen with a nib is dipped into ink and and the air is released by pressing it, a force is applied which act on the molecules of the ink by pushing the molecules. When the force is released, there will be a reaction force by pulling the molecules of the ink into the pen. Thereby the ink fills in the pen.
Tech A says that total resistance goes up as more parallel paths are added. Tech B says that total amperage goes up as more parallel paths are added. Who is correct
Answer: Tech B says that total amperage goes up as more parallel paths are added. Who is correct
Explanation: Tech B is correct, because amperage has been known to go up through when more parallel paths are added to a circuit. this is so because when more resistors are introduced in parallel to a circuit, the resulting resistance of the circuit would decrease, this increases the total current of the circuit. as a result, when more resistors are added in parallel what you get is a change in the direction of flow which is equal to providing more branches which charge can flow through.
A football coach walks 10 meters eastward and then 18 meters westward and then 22 metered East ward and finally 34 meters westward
Well you never specified what you're asking... however, this might help you learn the concepts of displacements and magnitude.
: The official displacement formula is as follows: s = sf - si. s = displacement; si = initial position; sf = final position
magnitude is the quantitative value of seismic energy. It is a specific value having no relation with distance and direction of the epicentre.
the magnitude of a vector in any dimension. For a 2d vector the formula is [math]|z| = \sqrt{x^2+y^2}[/math], where x and y are the x and y components of the vector respectively.
Answer:
Distance= 84 meters
Displacement= 20 meters
Direction= West
Explanation:
The starting position we know is 10 meters eastward and the final position is 18 meters westward. Remember the equation for displacement is Delta=final position minus the initial position. So its 18-10=8. The next equation that we would have to solve would be 22-8, because our starting position is 8 meters and our final position is 22, so final minus the initial remember. Then 22-8=14. Finally the last equation we would have to solve would be 34-12, again our initial position is 12 meters and our final position is 34 meters, therefore the answer to 34-14=20. So we end up with our displacement as 20 meters and don't forget to include the direction, which is West.
some answer now hurry
Answer:
Hee answer is B
Explanation:
____________.
If you drive 125 km in 2 hours, what is your average speed
Formula: s = d/t
s = speed
d = distance
t = time
Solve using the values we were given.
s = 125/2
S = 62.5km per hour
Best of Luck!
A snowmobile moves according to the velocity-time graph shown in the drawing. What is the snowmobile's average acceleration during (a) segment A, (b) segment B, and (c) segment C?
Answer:
(a). The average acceleration during segment A is 2 m/s²
(b). The average acceleration during segment B is zero.
(c). The average acceleration during segment C is 4 m/s².
Explanation:
Given that,
A snowmobile moves according to the velocity-time graph ,
(a), We need to calculate the average acceleration during segment A
Using formula of average acceleration
[tex]a=\dfrac{v_{f}-v_{i}}{t_{2}-t_{1}}[/tex]
Where, [tex]v_{i}[/tex] = initial velocity
[tex]v_{f}[/tex] =final velocity
[tex]t_{i}[/tex] = initial time
[tex]t_{f}[/tex] =final time
Put the value into the formula
[tex]a=\dfrac{40-0}{20-0}[/tex]
[tex]a=2\ m/s^2[/tex]
(b). We need to calculate the average acceleration during segment B
Using formula of average acceleration
[tex]a=\dfrac{v_{f}-v_{i}}{t_{2}-t_{1}}[/tex]
Put the value into the formula
[tex]a=\dfrac{40-40}{50-20}[/tex]
[tex]a=0\ m/s^2[/tex]
(c). We need to calculate the average acceleration during segment C
Using formula of average acceleration
[tex]a=\dfrac{v_{f}-v_{i}}{t_{2}-t_{1}}[/tex]
Put the value into the formula
[tex]a=\dfrac{80-40}{60-50}[/tex]
[tex]a=4\ m/s^2[/tex]
Hence, (a). The average acceleration during segment A is 2 m/s²
(b). The average acceleration during segment B is zero.
(c). The average acceleration during segment C is 4 m/s².
A 8.0-cm long solenoid has 2000 turns of wire and carries a current of 5.0-A. Calculate the strength of the magnetic field at the center of the solenoid in teslas.
Answer:
B = 0.157 T
Explanation:
Given that,
Length of the solenoid, l = 8 cm = 0.08 m
Number of turns in the wire, N = 2000
Current, I = 5 A
We need to find the strength of the magnetic field at the center of the solenoid. It is given by the formula as follows :
[tex]N=\mu_o nI[/tex], N is number of turns per unit length of solenoid.
So,
[tex]B=4\pi \times 10^{-7}\times \dfrac{2000}{0.08}\times 5\\\\=0.157\ T[/tex]
So, the magnetic field at the center of the solenoid is 0.157 T.
A substance has a mass of 15,000 kg and a volume of 30 m 3 . What is the density of the
substance?
Answer:
500 kg/m^3
Explanation:
equation ; p = m / v
m = 15,000
v = 30
p = 15,000 / 30, p = 500, add units at the end!
Hope this helps!!
name three substances that could be added to the water to make the steel needle to sink
Answer:
The steel needle floats on top of the water because of surface tension. Surface tension happens because the water molecules at the surface of the water are strongly attracted to each other more than they are to the air molecules above them. The water molecules make an invisible skin on the water’s surface that allows things like the needle to float on top of the water.
When soap is added to the water, the water molecules aren't drawn together as strongly. The soap molecules combine with the water molecules and lessen the liquid’s surface tension. The new attractions between the air, water, and soap molecules are weaker than the water-to-water attractions. As a result, the liquid’s surface is no longer strong enough to support the weight of the steel needle and the steel needle sinks.
Answer:
when a Steel Blade is placed on water horizontally just surface tension and the buoyancy will be able to balance the weight of the blade and it will float on the water surface you know the boy and she is not sufficient to make the Steel Blade float now if you are detergent what are the surface tension of water immediately decreases the surface tension no longer be able to balance The Blade and it will sink
hope it helps u
plz mark it as brainlist
A ball is rolling down a hill so that it accelerates at 3 m/s2. If it starts from rest and reaches a velocity of 9 m/s at the bottom of the hill, how long is the hill?
Answer:
13.5 m
Explanation:
Given:
v₀ = 0 m/s
v = 9 m/s
a = 3 m/s²
Find: Δx
v² = v₀² + 2aΔx
(9 m/s)² = (0 m/s)² + 2 (3 m/s²) Δx
Δx = 13.5 m