if the force is 200N and 5m/2 whats the pressure

Answer:

uuuh 4.25191 × 10-21 grams????

Explanation:

Answer:

49.35  mL

Explanation:

Given: 56.2 mL of gas

To find: volume that 56.2 mL of gas at 820 mm of Hg would occupy at 720 mm of Hg

Solution:

At 820 mm of Hg, volume of gas is 56.2 mL

At 1 mm of Hg, volume of gas is [tex]\frac{56.2}{820}[/tex]

At 720 mm of Hg, volume of gas is [tex]\frac{56.2}{820}(720)=49.35\,\,mL[/tex]

Answer:

The skeletal muscle tissue is found in biceps.

=> Option B is correct

Hope this helps!

:)

There are different types of muscles namely smooth muscles, skeletal muscles, non-striated muscles etc. Biceps brachii is classified as skeletal muscles.

Skeletal muscles are controlled by the somatic nervous system and are voluntary muscles. The other types of muscle include smooth muscle, which is non-striated, and cardiac muscle, both of which are striated. These two types are both considered to be involuntary, or under the direction of the autonomic nervous system.

The biceps brachii commonly know as the biceps, is a large, thick muscle on the ventral portion of the upper arm. The muscle is composed of a short head and a long head. The long head is located on the lateral side of the biceps brachii while the short head is located on the medial side[1].

The biceps brachii works across three joints, and is able to generate movements in glenohumeral, elbow and radio-ulnar joints.

To find more skeletal muscles, refer here:

https://brainly.com/question/1194286

#SPJ5

Answer:

            CH3

            |

CH3-    C H  -CH2-CH2-      CH   - CH2-CH2-CH3

                                              |

                                              CH

                                           /     \

                                         CH3  CH3

Explanation:

Octan

C-C-C-C-C-C-C-C

Metyl

CH3 -

Isopropyl

     CH3

    /

- CH

   \

     CH3

2-metil-5-isopropiloctan

           CH3

            |

CH3-    C H  -CH2-CH2-      CH   - CH2-CH2-CH3

                                              |

                                              CH

                                           /     \

                                         CH3  CH3

Answer:

The volume is 1.2L

Explanation:

Initial volume (V1) = 700mL = 0.7L

Initial temperature (T1) = 7°C = (7 + 273.15)K = 280.15K

Initial pressure = 106.6kPa = 106600Pa

Final temperature (T2) = 27°C = (27 + 273.15)K = 300.15K

Final pressure (P2) = 66.6kPa = 66600Pa

Final volume (V2) = ?

To solve this question, we need to use combined gas equation which is a combination of Boyle's law, Charles Law and pressure law.

(P1 × V1) / T1 = (P2 × V2) / T2

solve for V2 by making it the subject of formula,

P1 × V1 × T2 = P2 × V2 × T1

V2 = (P1 × V1 × T2) / (P2 × T1)

V2 = (106600 × 0.7 × 300.15) / (66600 × 280.15)

V2 = 22397193 / 18657990

V2 = 1.2L

The final volume of the gas is 1.2L

Answer:

Chemical potential energy is a form of potential energy related to the structural arrangement of atoms or molecules. This arrangement may be the result of chemical bonds within a molecule or otherwise. Chemical energy of a chemical substance can be transformed to other forms of energy by a chemical reaction.

The chemical energy and nuclear energy can be considered potential energy because both of them has energy stored in it.

Potential energy is any form of energy that has stored potential that can be put to future use such as nuclear energy, chemical energy in which the energy is stored in it so we can conclude that chemical energy and nuclear energy can be considered potential energy due to its storage of energy.

Learn more about potential energy here: https://brainly.com/question/14427111

Answer:

The mass is converted to energy to cause the mushroom cloud you woud see

Explanation:

Answer:

proactively develop ROE as well as responding to requests for additional ROE measures

Explanation:

The rules of engagement (roe) working group is a group who's main job is to  proactively develop ROE as well as responding to requests for additional ROE measures. Rules of Engagement are a set or rules or directives for military soldiers that define the circumstances, conditions, degree, and manner in which the use of force can be used.

Answer:

Carbon (C)

Explanation:

Because the element is the element of the main subgroup of group IV , it has oxidation number +4 in the oxide, and oxide formula is EO2.

reaction:

                                     EO2 + H2O ---> H2EO3

from reaction               1 mol    1 mol       1 mol

31 g acid - 22 g oxide = 9 g water

M(H2O) = 18 g/mol

9g * 1 mol/18 g = 0.5 mol H2O

As we see from reaction molar ratios EO2 : H2O : H2EO3 = 1 : 1 : 1,

so if  we have 0.5 mol H2O , we also have 0.5 mol EO2.

0.5 mol EO2 has mass 22 g.

Molar mass(EO2) = mass/ number of moles = 22 g/ 0.5 mol = 44 g/mol

Molar mass (EO2) = M(E) + 2M(O) = 44 g/mol

M(E) + 2 *16 g/mol = 44 g/mo

M(E) = 44-32 = 12 g/mol

Molar mass 12 g/ mol is molar mass of carbon.

So, element is carbon (C).

Answer:

The correct answer to the following question will be "1.76 g/L".

Explanation:

The given values are:

P₁ = 15 kPa

Solubility of water, C₁ = 0.66 g/L

P₂ = 40.0 kPa

C₂ = ?

Now,

According to Henry's Law,

⇒  [tex]\frac{P_{1}}{P_{2}}=\frac{C_{1}}{C_{2}}[/tex]

⇒  [tex]C_{2}=\frac{C_{1}\times P_{2}}{P_{1}}[/tex]

On putting the estimated values, we get

⇒       [tex]=\frac{0.66\times 40}{15}[/tex]

⇒       [tex]=\frac{26.4}{15}[/tex]

⇒       [tex]=1.76 \ g/L[/tex]

Answer:

Is an absolute temperature scale with zero at absolute zero

Answer: The answer is D. Elements that share the same column

Explanation:

The elements occupying the same groups are sharing the same column. They have similar chemical and physical properties. Elements of the same group have the same number of valence electrons.

All elements are classified to different groups and periods. The horizontal rows in the table is called periods and the vertical column are called groups in periodic table.

There are 18 groups and 7 periods in periodic table. The atomic number increases from left to right along a period. Elements in a group are having same number of valence electrons and are having similar chemical and physical properties.

Elements in a groups shows similarity in reactivity and physical properties.  They show same trend in increasing or decreasing nature of physical quantities. A group is thus, representing a column in periodic table.  Therefore, option D is correct.

To find more on groups in periodic table, refer here:

https://brainly.com/question/29761108

#SPJ5

Answer:

fluoride ion

Explanation:

If atoms gain electrons, they become negative ions, or anions. Consider the example of fluorine (see Figure below). A fluorine atom has nine protons and nine electrons, so it is electrically neutral. If a fluorine atom gains an electron, it becomes a fluoride ion with an electric charge of -1.

hope that helps!

When a fluorine atom will gain electrons then it will form an anion,[tex]F^{-}[/tex].

An ion having a negative charge, or one with more electrons than protons, is referred to as an anion. When an element acquires one or even more electrons, anion formation was observed.

The smallest component of ordinary stuff that makes up a chemical element is just an atom.

Atoms generate negative ions, or anions when they gain electrons.  A fluorine atom is generally electrically neutral since it possesses nine protons as well as nine electrons. Gaining an electron causes a fluorine atom to will have to become a fluoride ion, which has an electric charge of such -1.

To know more about the atom and anion

https://brainly.com/question/15578817

#SPJ2

Answer:

[tex]M = 13.714\,\frac{mol}{L}[/tex]

Explanation:

The molarity is the ratio of moles solute to volume of solution. Then,

[tex]M = \frac{2.4\,mol}{\left(175\,mL\right)\cdot \left(\frac{1}{1000}\,\frac{L}{mL} \right)}[/tex]

[tex]M = 13.714\,\frac{mol}{L}[/tex]

Answer:

[tex]M=13.7\frac{mol}{L}=13.7M[/tex]

Explanation:

Hello,

In this case, we define the molar concentration or widely known as molarity as the ratio of the moles of the solute to the volume of the solution in litres. Thus, for the computation of the molar concentration we make sure we have litres:

[tex]V_{solution}=175mL*\frac{1L}{1000mL} =0.175L[/tex]

Next, we can compute the molarity in mole per litre or just molar units by:

[tex]M=\frac{n_{solute}}{V_{solution}} =\frac{2.4mol}{0.175L} \\\\M=13.7\frac{mol}{L}=13.7M[/tex]

Best regards.

Answer:

A:force times an object displacement

Explanation:

Answer:

4.22

Explanation:

pH stands for potential hydrogen. The letter “p” denotes potential and the letter “H” denotes hydrogen.

pH helps to find the acidity or alkalinity of an aqueous solution.

The number of hydrogen ions (protons) present in a solution is determined by the pH scale.

A pH greater than 7 makes the water more alkaline and a pH less than 7 makes the water more acidic.

[tex]pH=-\log [H^+]=-\log [0.00006]=4.22[/tex]

Answer:

0.25 M

Explanation:

The first step is to determine how many moles of glucose there are, which means first finding out the molar mass of glucose. Carbon has a molar mass of about 12, hydrogen 1, and oxygen 16, so the total molar mass of glucose is about 6(12)+12(1)+6(16)=180 grams. This means that 90 grams is half a mole. Half a mole of substance divided by two liters of solution is (1/2)/2=1/4, or a molarity of 0.25. Hope this helps!

Answer:

2.843 M

Explanation:

Molarity = moles / volume

Milliliters to liters:

500 mL = .500 L

Grams to moles:

MgO molar mass = 16.00 + 24.31 = 40.31 g/mol

57.3 g x 1 mol / 40.31 g = 1.421 mol

Molarity:

1.421 mol / .500 L =  2.843 M

Answer:

ecosystem

Explanation:

An ecosystem includes all of the living things (plants, animals and organisms) in a given area, interacting with each other, and also with their non-living environments (weather, earth, sun, soil, climate, atmosphere). The living and nonliving components of the ecosystem are linked together through nutrient cycles and energy flows. Ecosystems are of any size, but usually they are in particular places.

In an ecosystem, plants depend on the soil for nutrients. These nutrients are cycled in nature by the various biogeochemical cycles within the ecosystem. The ecosystem is a self sustaining unit in terms of materials and energy flow.

Answer:

D. ecosystem

Explanation:

An ecosystem is a large community of living organisms (plants, animals and microbes) in a particular area. The living and physical components are linked together through nutrient cycles and energy flows.

In an ecosystem there is symbiotic relationship which entails each living organism contributes to the well being of the other and the entire population.

Answer:

Is the shampoo basic or acidic in nature? How can you know?

The shampoo by nature is of basic pH.

Explanation:

Since the basic shampoo weakens the hair by breaking the disulfide bonds of the keratin of the hair, it is sought to slightly acidify adding small flakes of various materials, for example, glycol distearate.  

The shampoos hardly have the pH indicated, the most common is to see shampoo with balanced or neutral pH (pH 7). To know the pH of the shampoo you can buy pH measuring strips. A pH between 5.5 and 7 is correct.

Answer:

Explanation:

pressure of dry nitrogen gas at 20° = Partial pressure of nitrogen and partial pressure of water at that temperature .

The pressure of dry nitrogen gas= total pressure - vapour pressure of water at 20°C

= 200 k Pa - 2.34 k Pa

= 197.66 kPa.

Answer:

The concentration of the resulting solution is 0.25 or one quarter of the standard solution

Explanation:

Whereby the molar concentration of the standard solution is P molar per liter, we have

25 ml of the standard solution contains

25/1000×P moles of the standard solution such that the resultant solution has a volume of 25 + 75 = 100 ml contains 0.025 P moles of the standard solution

The concentration of a solution is the number of moles contained per liter, which gives

100 ml contains 0.025 P moles

1 liter = 1000 ml will contain 1000/100 × 0.025 = 0.25 P moles of the stanard solution

Therefore, the concentration of the resulting solution is 0.25 or one quarter of the standard solution.

Answer:

 Translation:

Classify the following elements into metals, nonmetals, metalloids, or gases, noble : fluorine, sulfur, nitrogen, chlorine, magnesium, helium, sodium, bromine, silicon, tellurium.

Explanation:

Metals: They occupy the left and central areas of the Periodic Table; therefore, they constitute a majority group of the elements.

Nonmetals: They are located in the upper right region of the Periodic Table.

Within the Periodic Table, the metalloids lie diagonally from boron to polonium. Items above on the right are nonmetals, and items below on the left are metals.

The noble gases are located in group 18 of the Periodic Table.

Answer:

fluorine: it is a gas at room temperature

sulfur: it is a metal

nitrogen: it is a diatomic gas

chlorine: it is a halogen

helium: it is a gas

sodium: alkali metal

magnesium: metal

bromine: halogen

silicon: metalloid

tellurium: it is a semi-metal

Explanation:

the grouping of the chemical compounds respect a location in the periodic table, and this classification exists since all the compounds have different behaviors, different melting and boiling temperatures and even different valence, oxidation, atomic masses.

Answer:

As they move away from each other the force makes it leave a gap between them. And the convection currents push up a lot of magma towards the surface. The magma cools of very quickly in the water. Forming rocks constantly, rocks that little by little start to make a big mass, that eventually turns into an underwater mountain, or rather a mid-ocean ridge.

(Hope this helps) Sky

Answer:

Acid solutions will be those which lights up a bulb when a circuit is connected through them.

Explanation:

Acid solutions such as HCl and HNO3 are polar in nature and permits the flow of electricity through them. Whereas non-polar solutions like ethanol and glucose solution will not allow the flow of electricity through them.

Therefore, when an electric circuit is completed by dipping the nails connected to a battery and a bulb into the different solutions, the lighting up of the bulb indicates which solutions are acids.

Answer:

The steps that must be long to obtain separately the components (to the substances) of a mixture of water, salt and sand, are respectively: A) filtration and siphoning B) decanting and siphoning C) simple filtration and distillation D) collection and decantation.

Simple filtration and Siphoning is the method. When an insoluble solid is present in a liquid. Filtration is the ideal method of separation,The sand is filtered by the filtered paper as water is allowed to pass through the filter paper into a beaker where the funnel which hold the filter paper emptied into.

Water molecules is Siphoned, pull by force of gravity through the sand, past  the filter paper to emerge as clean in the beaker below.

Answer:

The new volume of the gas is 29.57 Liters

Explanation:

Given;

initial pressure of gas, P₁ =  12 atm

initial volume of gas, V₁ = 23 Liters

initial temperature of gas, T₁ = 200 K

final pressure of gas, P₂ =  14 atm

final temperature of gas, T₂ = 300 K

final volume of gas, V₂ = ?

To determine the final volume of the gas, we apply general gas law;

[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}\\\\V_2 = \frac{P_1V_1T_2}{T_1P_2}\\\\V_2 = \frac{12*23*300}{200*14}\\\\V_2 = 29.57 \ Liters[/tex]

Therefore, the new volume of the gas is 29.57 Liters

Answer:

Electron microscopy and scanning tunneling microscopes contributed to the understanding of atoms in understanding atomic structure.

The electron microscope has magnifications of about 100,000x.

This helped the scientists to have accurate image groupings of the atoms. Scanning tunnel microscope helped scientists to have the images of groups of atoms.

Answer:

0.35 g Li

Explanation:

H2SO4 + 2Li -> Li2SO4 + H2

7 g Li -> 2 g H2

      x  -> 0.10 g H2

x= (0.10 g H2 * 7 g Li)/ 2 g H2      x= 0.35 g Li