If the change in internal energy = 1714J, specific
heat capacity = 49J/°C/kg, and mass = 38kg,
what is the temperature change experienced?
Give your answer to 2 decimal places.

The point on the x-axis between the two charges where the electric field is zero is 0.747 m, when the charges -2.1 μC and -5.6 μC are located at (-0.50 m , 0) and (0.50 m , 0), respectively.

An electric field is defined as the electric force per unit charge. It is a field of force surrounding electrically charged particles, such as electrons or protons in motion, that exerts force on surrounding matter. It is represented by the symbol E.

The electric field E at any point (x,y) on the x-axis due to the charge Q1 at (-0.50 m, 0) is

[tex]E1 = k * Q1 / r1^2[/tex]

where, k = Coulomb's constant = [tex]9 x 10^9 Nm^2/C^2[/tex]

Q1 = charge = -2.1 μC

r1 = distance between Q1 and

(x,y) = (0.50 + x) m

The electric field E at any point (x,y) on the x-axis due to the charge Q2 at (0.50 m, 0) is

[tex]E2 = k * Q2 / r2^2[/tex]

where,

Q2 = charge = -5.6 μC

r2 = distance between Q2 and (x,y) = (0.50 - x) m

The total electric field E at any point (x,y) on the x-axis due to both the charges is

[tex]E = E1 + E2 = k * Q1 / r1^2 + k * Q2 / r2^2[/tex]

[tex]E = k * (-2.1 * 10^-6) / (0.5 + x)^2 + k * (-5.6 * 10^-6) / (0.5 - x)^2[/tex]

At the point on the x-axis between the two charges where the electric field is zero,

[tex]E = 0k * (-2.1 * 10^-6) / (0.5 + x)^2 + k * (-5.6 * 10^-6) / (0.5 - x)^2 = 0[/tex]

Simplifying, we get [tex](0.5 + x)^2 / (0.5 - x)^2 = 2.667x^2 + 2.667x - 0.50 = 0[/tex]

Solving for x, we get

x = -1.74 m or

x = 0.747 m

We cannot have a negative value of x as the point has to be between the two charges. So, the location of the point where the electric field is zero is x = 0.747 m.

Learn more about electric field: https://brainly.com/question/14372859

#SPJ11

Water droplets that act as prism are phenomenon known as : b) rainbow.

When light enters water droplet and is refracted, it is dispersed into its component colors due to difference in the index of refraction of each color of light. This results in band of colors in the shape of arc with red on outer edge and violet on inner edge, with other colors of spectrum in between. This is the same effect as prism which disperses light in the same way.

Rainbows appear in seven colors because water droplets break sunlight into seven colors of spectrum and you get the same result when sunlight passes through prism. Water droplets in the atmosphere act as prism though traces of light are very complex.

To know more about rainbow, refer

https://brainly.com/question/1550509

#SPJ1

The meter stick is in static rotational equilibrium, which means that the sum of the clockwise torques must equal the sum of the counterclockwise torques. The torque is equal to the force multiplied by the distance from the support point, so we can set up the equation:  
CW Torque (5 cm mark): 220 g x 5 cm = 1100 g-cm
CW Torque (90 cm mark): 120 g x 90 cm = 10,800 g-cm
CCW Torque (40 cm mark): M x 40 cm = M x 40 cm
1100 g-cm + 10,800 g-cm = M x 40 cm
M = (1100 + 10,800) / 40 = 250 g
Therefore, the mass of the meter stick is 250 g.

Rotational equilibrium refers to the condition in which an object is motionless and still rotating. The condition occurs when the net torque on an object is equal to zero.

Read more about the topic of rotational equilibrium:

rainly.com/question/31142588

#SPJ11

The percentage of the power of the battery that is dissipated across the internal resistance and hence not available to the bulb is 7.63%

To find the percentage of the power dissipated across the internal resistance, follow these steps:

1. Calculate the total resistance in the circuit, which includes both the bulb's resistance and the battery's internal resistance: R(total) = R(bulb) + R(internal) = 30.0 Ω + 2.50 Ω = 32.50 Ω.

2. Calculate the current flowing through the circuit using Ohm's law: I = V / R(total) = 12.0 V / 32.50 Ω = 0.369 A.

3. Calculate the power supplied by the battery: P(battery) = V * I = 12.0 V * 0.369 A = 4.428 W.

4. Calculate the power dissipated across the internal resistance: P(internal) = I^2 * R(internal) = (0.369 A)^2 * 2.50 Ω = 0.338 W.

5. Find the percentage of the power dissipated across the internal resistance: (P(internal) / P(battery) * 100% = (0.338 W / 4.428 W) * 100% ≈ 7.63%.

Therefore, about 7.63% of the power of the battery is dissipated across the internal resistance and is not available to the bulb.

learn more about internal resistance here:

https://brainly.com/question/14883923

#SPJ11

The correct order of electromagnetic waves from longer wavelength to shorter wavelength are D) radio waves, microwaves, infrared, visible, ultraviolet, x-rays, and gamma rays. Therefore, the correct option is D.

The electromagnetic spectrum includes the entire range of electromagnetic radiation. This range is divided into seven main categories depending on their wavelength and frequency. These categories are radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.

Radio waves: These are the longest wavelengths and the lowest frequency in the electromagnetic spectrum. Radio waves have a frequency of fewer than 300 GHz and wavelengths ranging from a few centimeters to a few kilometers.

Microwaves: These waves are next in order of wavelength after radio waves. The microwave wavelength ranges from a few millimeters to a few centimeters. Microwaves are used in many applications like communication, heating food, and radar systems.

Infrared: The wavelength of infrared radiation ranges from 700 nm to 1 mm. Infrared radiation is used in many applications like heating, remote temperature sensing, and security systems.

Visible Light: It is a part of the electromagnetic spectrum that is visible to the human eye. The wavelength of visible light ranges from 400 to 700 nm. The color of light changes depending on the wavelength.

Ultraviolet: Ultraviolet light has a wavelength ranging from 10 nm to 400 nm. UV light is harmful to living organisms and can cause skin cancer, eye damage, and premature aging.

X-rays: X-rays have a wavelength ranging from 0.01 nm to 10 nm. They are used in medicine and industry to produce images of the internal structures of objects.

Gamma rays: They are the most energetic waves in the electromagnetic spectrum. Gamma rays have the shortest wavelengths and the highest frequencies. They are produced by nuclear explosions, radioactive decay, and nuclear reactions.

To learn more about "electromagnetic waves", visit: https://brainly.com/question/31138669

#SPJ11

We know the rope is 60 m long and the rope has a diameter of 9.4 mm. We can use the density of the rope (55 g/m) to calculate the mass of the rope, m = ρ x V. To calculate the volume of the rope, we will use the equation V = π x r2 x L, where π is pi, r is the radius of the rope, and L is the length of the rope.

To calculate the work needed to pull the entire rope to the ledge, we will use the equation:

W = F x d

where

Thus, we can calculate the work needed to pull the entire rope to the ledge as W = F x d, where F is the force and d is the distance. The force is equal to the mass of the rope multiplied by the acceleration due to gravity, F = m x g, where m is the mass of the rope and g is the acceleration due to gravity (9.8 m/s2). Therefore, the work is equal to W = m x g x d.

Using the values provided, the work needed to pull the entire rope to the ledge is W = (55 g/m x (π x (4.7 mm)2 x 60 m)) x 9.8 m/s2 = 37,827.24 J.

Learn more about force: https://brainly.com/question/25573309

#SPJ11

No, there must always be a force present in order to have an acceleration. This is because, according to Newton's Second Law of Motion, acceleration is exactly proportional to force.

An item will accelerate more quickly the more force is given to it. An object's velocity will remain constant without a force acting on it (whether it is at rest or moving with a constant speed and direction), hence its acceleration will be zero. One of Newton's Three Laws of Motion, this is referred to as the Law of Inertia. No, an acceleration always requires the presence of a force. This is because acceleration is eminently proportional to force, in accordance with Newton's Second Law of Motion.  it NOT possible to have an acceleration without having a force.

learn more about force  here:

https://brainly.com/question/13191643

#SPJ4

a) If the current is running from west to east, the force that our planet's magnetic field exerts on this cord is directed upwards
b) The magnitude of the force that our planet's magnetic field exerts on this cord if it is oriented so that the current in it is running from west to east is F =2.64 x 10^-4 N
c) If the current is running vertically upward, the force that our planet's magnetic field exerts on this cord is directed to the left.  west
d) The magnitude of the force that our planet's magnetic field exerts on this cord if it is oriented so that the current in it is running vertically upward is F = 0 zero
e) If the current is running from north to south, the force that our planet's magnetic field exerts on this cord is directed east.
f) The magnitude of the force that our planet's magnetic field exerts on this cord if it is oriented so that the current in it is running from north to south is F = 2.64 x 10^-4 N
g) The magnetic force is not large enough to cause significant effects under normal household conditions.

EXPLANATION

a) The direction of the force that our planet's magnetic field exerts on the cord is perpendicular to both the direction of the current and the direction of the magnetic field, according to the right-hand rule. In this case, if the current is running from west to east, and the magnetic field is from south to north, the force will be directed upwards.

b) The magnitude of the force can be calculated using the formula:

F = BIL sin(theta)

where B is the magnitude of the magnetic field, I is the current, L is the length of the wire, and theta is the angle between the direction of the current and the direction of the magnetic field. In this case, theta is 90 degrees, so sin(theta) = 1. Substituting the given values, we get:

F = (0.550 x 10^-4 T) x (1.50 A) x (2.40 m) x 1

= 2.64 x 10^-4 N

Therefore, the magnitude of the force is 2.64 x 10^-4 N.

c) If the current in the wire is running vertically upward, the force will be directed towards the west.

d) Using the same formula as in part (b), we can calculate the magnitude of the force:

F = (0.550 x 10^-4 T) x (1.50 A) x (2.40 m) x sin(90)

= 0

Therefore, the magnitude of the force is zero.

e) If the current in the wire is running from north to south, the force will be directed towards the east.

f) Using the same formula as in part (b), we can calculate the magnitude of the force:

F = (0.550 x 10^-4 T) x (1.50 A) x (2.40 m) x 1

= 2.64 x 10^-4 N

Therefore, the magnitude of the force is 2.64 x 10^-4 N.

g) The magnitude of the magnetic force in this case is quite small, and under normal household conditions, it is unlikely to cause significant effects. However, in some situations, such as in electrical power transmission systems, the effects of the magnetic force may need to be taken into account.

For more such questions on magnetic field

https://brainly.com/question/13689629

#SPJ11

The wavelength of the radio waves is approximately 0.579 m or 57.9 cm

Wavelength is the distance covered by an electromagnetic wave while propagating through space. The relationship between the wavelength and the frequency of an electromagnetic wave is given by the formula;

Wavelength = speed of light / frequency = c / f

where c is the speed of light and f is the frequency of the wave.

To calculate the wavelength of a VHF television station assigned to channel 22 that transmits its signal using radio waves with a frequency of 518 MHz, we substitute the known values into the equation above.

Wavelength = c / f = (3 x 10⁸ m/s) / (518 x 10⁶ Hz) = 0.579 m or 57.9 cm (rounded to three significant digits)

Therefore, the wavelength of the radio waves transmitted by the VHF television station assigned to channel 22 is 0.579 m or 57.9 cm (rounded to three significant digits).

Learn more about wavelength here: https://brainly.com/question/10728818.

#SPJ11

The block and the launcher exert forces of equal magnitude on each other. So correct option is C.

Force is a physical quantity that describes the influence that one object exerts on another object, typically measured in units of newtons (N) in the International System of Units (SI). Force is a vector quantity because it has both a magnitude (how strong the force is) and a direction (the direction in which the force acts).

There are many types of forces, such as gravitational force, electrostatic force, magnetic force, frictional force, and normal force. Forces can be either contact forces, which are exerted by objects that are physically touching each other, or non-contact forces, which are exerted without any physical contact between objects.

Since the launcher is suspended from the ceiling by a string, it is in a state of equilibrium, meaning that the forces acting on it must balance out. Therefore, the only horizontal force acting on the launcher is the force exerted by the block when it is launched. According to Newton's third law, for every action, there is an equal and opposite reaction. This means that the force exerted by the launcher on the block is equal in magnitude and opposite in direction to the force exerted by the block on the launcher.

Therefore, the correct answer is (C) The block and the launcher exert forces of equal magnitude on each other.

To know more about magnitude visit:

https://brainly.com/question/30033702

#SPJ1

The complete question is:

Main-sequence B star has the greatest surface temperature. The correct answer is a.

The surface temperature of a star is closely related to its spectral classification, which is determined by analyzing the star's spectrum. The temperature of a star's surface affects its color, with hotter stars appearing bluer and cooler stars appearing redder. Main-sequence stars are stars that are fusing hydrogen into helium in their cores.

The temperature of a star's surface depends on its spectral class, which is determined by its temperature. B stars are hotter than A stars, K stars are cooler than A stars, and supergiant stars are generally cooler than main-sequence stars of the same spectral class. Therefore,  option a, a main-sequence B star has the highest surface temperature of the three options given.

To know more about stars, here

brainly.com/question/31116168

#SPJ4

The statements that are true for the characteristics of accretion disk are, option (C) Conservation of angular momentum leads a cloud to form a disk rather than collapse entirely and option (E) The shape and motion of the accretion disk are the reason that the subsequently formed planets all orbit in or near the equatorial plane of the star.

An accretion disk is a disk of gas and dust that forms around a central object, such as a proto star or black hole, due to the conservation of angular momentum during the collapse of a rotating interstellar cloud. As material falls inward toward the central object, it forms a disk that heats up and emits radiation, providing a source of energy for the object. Some true statements regarding accretion disks are:

C. Conservation of angular momentum leads a cloud to form a disk rather than collapse entirely.

E. The shape and motion of the accretion disk are the reason that the subsequently formed planets all orbit in or near the equatorial plane of the star.

Statement A is incorrect because an accretion disk forms due to the conservation of angular momentum, not because there is nothing to stop the collapse of an interstellar cloud. Statement B is also incorrect because the size of an accretion disk can vary greatly depending on the size and mass of the central object and the amount of material available. Statement D is incorrect because most of the material in an accretion disk is expected to end up in the central object, not in its planets.

Therefore, the correct options are option (C) Conservation of angular momentum leads a cloud to form a disk rather than collapse entirely and option (E) The shape and motion of the accretion disk are the reason that the subsequently formed planets all orbit in or near the equatorial plane of the star.

Learn more about accretion disk here

brainly.com/question/1900229

#SPJ4

Suppose two rings are at the top of a ramp. The rings have the same mass, but one ring has a much larger radius than the other. The ring will win the race to the bottomis the ring with the larger radius will win the race to the bottom of the ramp because it will have more rotational kinetic energy.

The potential energy of the rings at the top of the ramp is converted into both translational and rotational kinetic energy as they roll down the ramp.At the top of the ramp, both rings have the same potential energy. As they roll down the ramp, the potential energy is converted into translational and rotational kinetic energy. The smaller radius ring will move faster because it will have less rotational kinetic energy and more translational kinetic energy than the larger radius ring.

Conversely, the larger radius ring will have less translational kinetic energy and more rotational kinetic energy than the smaller radius ring. Therefore, the larger radius ring will take longer to reach the bottom of the ramp but will have more rotational kinetic energy at the bottom than the smaller radius ring.

Learn more about kinetic energy at:

https://brainly.com/question/22174271

#SPJ11

Answer:

wave x has greater amplitude

The magnitude of the current's magnetic field at radial distances (a) 0, (b) 1cm, (c) 2cm (wire's surface), and (d) 4cm are undefined, 1.7 * 10^-3 Tesla, 1.7 * 10^-3 Tesla, and 8.5 * 10^-4 Tesla, respectively. 

The question is about finding the magnitude of magnetic fields at different radial distances across a diameter of a long cylindrical conductor of radius a=2 cm carrying uniform current 170A.

Let's solve it step by step.

(a) At radial distance 0:

At the center of the conductor, r = 0, the magnetic field is zero.

It can be found by using the formula for the magnetic field at the center of the wire: 

B = (μ_0 * I) / (2 * π * r)

= (4π * 10^-7 * 170) / (2π * 0)

= undefined.

Therefore, the magnetic field at r = 0 is undefined. 

(b) At radial distance 1cm:

Using the formula for the magnetic field at a point P located at a radial distance r from the center of the wire: 

B = (μ_0 * I) / (2 * π * r)

= (4π * 10^-7 * 170) / (2π * 0.01)

= 1.7 * 10^-3 Tesla.

(c) At radial distance 2cm:

The magnetic field at r = a (i.e., the surface of the wire) can be determined by substituting the value of r = 2cm into the magnetic field formula:

B = (μ_0 * I) / (2 * π * r)

= (4π * 10^-7 * 170) / (2π * 0.02)

= 1.7 * 10^-3 Tesla.

(d) At radial distance 4cm:

Again, we use the formula for the magnetic field at a point P located at a radial distance r from the center of the wire:

B = (μ_0 * I) / (2 * π * r)

= (4π * 10^-7 * 170) / (2π * 0.04)

= 8.5 * 10^-4 Tesla.

For similar question on magnetic field

https://brainly.com/question/26257705

#SPJ11

Earth is the only planet with a daily rotation. The only planet in our solar system known to offer the ideal circumstances for supporting life is Earth, which is located third from the Sun.

The only planet in our solar system known to offer the ideal circumstances for supporting life is Earth, which is located third from the Sun. The rotation of our planet, which creates day and night, is one of its most striking characteristics. Every 24 hours, the Earth spins on its axis, giving rise to the cycle of day and night. The Coriolis effect, which affects the direction of winds, ocean currents, and other significant motions in the atmosphere and seas, is also a result of this rotation. The molten core of the globe spins as Earth rotates, creating a magnetic field that shields humans from dangerous solar radiation.

Learn more about planet here:

https://brainly.com/question/26756957

#SPJ4

Galileo famously observed that objects of different masses fall to Earth at the same rate, regardless of their mass. This observation led him to conclude that gravity was a universal force of attraction between any two objects with mass.

Galileo Galilei was an Italian astronomer, physicist, and mathematician who contributed greatly to the development of modern science. His contributions to physics include the creation of the scientific method and his work on the principles of motion and gravity.

Galileo was one of the first scientists to study gravity. He observed that objects of different weights would fall at the same rate when dropped from the same height. This led him to conclude that gravity is a constant force that acts upon all objects equally, regardless of their weight or composition.

Galileo's work on gravity laid the foundation for the later development of Sir Isaac Newton's theory of gravity. Newton built on Galileo's findings and formulated the law of universal gravitation, which states that every object in the universe attracts every other object with a force that is proportional to their masses and inversely proportional to the square of the distance between them.

Learn more about Galileo at https://brainly.com/question/4966012

#SPJ11

Consider a moment during the motion of the parachute. It travels down and the atmospheric gas is in contact with it all the time.

That is why displacing air imposes a force on the system.

To know more about Newton's Law:

brainly.com/question/28171613

#SPJ4

S-waves are transverse body waves that cause damage during earthquakes by shearing the material they pass through. They move perpendicular to the direction of wave propagation, are secondary to P-waves, and cannot travel through fluids.

Seismographs can pick up transverse body waves known as S-waves as they go through the interior of the Earth. This causes the material's particles to vibrate perpendicular to the wave direction, which produces a shearing motion. These waves move perpendicular to the direction of wave propagation. Because S-waves move more slowly than primary waves, which are longitudinal waves that compress and expand the material they pass through, they are also known as secondary waves. Since shear stress cannot exist in fluids, P-waves cannot pass through fluids or solids. This restricts the S-wave detection to regions of the Earth's mantle. The shearing motion brought on by S-waves during an earthquake can significantly stress and strain a building's foundation. leading to collapse or other forms of structural damage.

learn more about  S-waves here:

https://brainly.com/question/26489416

#SPJ4

The force of the seat on the passenger is 7.33 N and its direction is inward toward the center of the arc. The radius of the track would have to be = 3,55 m.

At point A, the roller-coaster car has a total mass of 505 kg, including the passenger with a mass of 52.0 kg. The car is travelling at a speed of 14.0 m/s and the radius of the arc is 24.0 m. The force that the seat exerts on the passenger can be calculated using the formula F = mv2/r, where m is the mass of the passenger, v is the speed of the car, and r is the radius of the arc.

In this case, F = (52.0 kg)(14.0 m/s2) / 24.0 m = 7.33 N. The force of the seat on the passenger is 7.33 N, and its direction is inward toward the center of the arc.

For the force of the seat on the passenger at point A to be three times the passenger's weight (3 x 52.0 kg = 156.0 kg), the radius of the track would have to be r = (52.0 kg)(14.0 m/s2) / 156.0 kg = 3.55 m.

Learn more about direction of the force: brainly.com/question/30890687

#SPJ11

(A) Alice observes a beat frequency of approximately 3.9 Hz between the device and its echo. (B) Alice must walk away from the building at a speed of approximately 7.05 m/s to observe a beat frequency of 6.19 Hz.

(A) The given values are:

Speed of Alice, vA = 4.68 m/s.

The frequency emitted by the device, f1 = 262 Hz

Speed of sound in air, v = 343 m/s(a)

The beat frequency, f beat is given by the formula: fbeat = |f1 - f2| where f2 is the frequency of the reflected sound.

Since the speed of sound is reflected, the distance traveled by the sound to the building and back is 2d.

Therefore, the time taken is given by t = 2d/v.

The frequency f2 is given by f2 = v/(2d).

The distance d = vt/2 = (vA t)/2

The time t is given by: t = d/vA

The frequency f2 is given by f2 = v/(2d) = vA/(2v t)

Therefore, the beat frequency is: fbeat = |f1 - f2| = |262 - vA/(2v t)|

Thus, substituting the given values, we get: fbeat = |262 - 343/(2 × 4.68 × t)|

To solve this, we can use trial and error method.

We can check if fbeat is approximately equal to 2, 3, 4, 5, or 6 Hz.

Using t = 0.01 s, we get: fbeat = |262 - 343/(2 × 4.68 × 0.01)|≈ 4.4 Hz

Using t = 0.011 s, we get: fbeat = |262 - 343/(2 × 4.68 × 0.011)|≈ 3.9 Hz

Therefore, Alice observes a beat frequency of approximately 3.9 Hz between the device and its echo.

(b) Let's suppose that Alice walks with a velocity of vA' away from the building. Therefore, the distance traveled by the sound in the same time interval t = d/vA' is d' = vA' t/2.The time taken is given by t = d/vA = d'/vA'

Now, the frequency f2 is given by f2 = v/(2d') = vA'/(2v t)

The beat frequency is:fbeat = |f1 - f2| = |262 - vA'/(2v t)|

Thus, substituting the given values, we get: fbeat = |262 - 343/(2 × vA' × t)|

Let's suppose that fbeat = 6.19 Hz.

Using trial and error, we get that t ≈ 0.018 s.

Substituting this value, we get:6.19 = |262 - 343/(2 × vA' × 0.018)|

Therefore, vA' ≈ 7.05 m/s

Thus, Alice must walk away from the building at a speed of approximately 7.05 m/s to observe a beat frequency of 6.19 Hz.

To know more about frequency, refer here:

https://brainly.com/question/5102661#

SPJ11#

The final velocity (vf) of an item in free fall may be calculated using the following formula to determine the speed of the high-wire performer shortly before she hits the ground:

sqrt = vf (2gh)

where g is the acceleration due to gravity (9.81 m/s²), h is the height from which the object falls (9.2 m), and sqrt represents the square root function.

Plugging in the given values, we get:

vf = sqrt(2 × 9.81 m/s² × 9.2 m)

= sqrt(180.0812 m²/s²)

≈ 13.42 m/s

Therefore, the velocity of the high-wire artist just before she strikes the ground is approximately 13.42 m/s.

learn more about velocity (vf) here:

https://brainly.com/question/15195121

#SPJ4

The detection methods that measure the gravitational tug of a planet on its star, allowing us to estimate planetary mass are the astrometric and Doppler methods.

A detection method is a technique used to determine whether or not something is present or absent. It is a general term used to refer to a variety of methods used to identify the presence of an object, including devices and instruments used to identify or observe things that are not immediately visible to the human eye.

The detection method used to determine the mass of a planet is either the astrometric or Doppler method. Both of these methods rely on the gravitational pull that a planet has on its star to determine the mass of the planet.

Astrometric method: The astrometric method entails looking at the position of a star relative to the background stars. When a planet orbits a star, it causes the star to wobble, resulting in the star appearing to move back and forth slightly. The astrometric method determines the mass of a planet by calculating the size of this wobble.

Doppler method: The Doppler method, also known as the radial velocity method, measures the gravitational tug of a planet on its star by detecting the wobbling motion of the star as it moves closer and farther away from the observer.

The size of the wobble is determined by the planet's mass, while the planet's distance from the star determines the time it takes to complete one orbit.

By combining these two measurements, astronomers can estimate a planet's mass.

To know more about "detection method" refer here:

https://brainly.com/question/28565292#

#SPJ11

Leaning back in a chair shifts your center of mass outside the base of support and creates a turning force around the pivot point of the two back legs, which can cause the chair to tip over.

When you lean back in a chair, your body's weight creates a turning force, or torque, around the pivot point formed by the two back legs of the chair. This torque tends to rotate your body further back, causing the chair to tip over if the force becomes too great. To maintain stability, you need to apply a counter-torque by shifting your center of mass back over the base of support.

What is turning force?

Turning force, also known as torque, is a force that causes an object to rotate around a fixed axis or pivot point. It is a product of a force acting on a lever arm (the perpendicular distance between the force's line of action and the pivot point).

What is pivot point?

A pivot point, also known as a fulcrum, is a fixed point around which a lever or other object is able to rotate or pivot. It is the point on which the object balances and rotates.

To know more about pivot point, visit:

https://brainly.com/question/29606651

#SPJ1

The magnitude of the net force is 15.6 N.

Step by step explanation:

The net force is the combination of force 1 and force 2. The magnitude of the net force is calculated using the Pythagorean Theorem.

The x-component of the net force is the difference of the magnitudes of the two forces multiplied by the cosine of the difference of their directions.

The y-component of the net force is the difference of the magnitudes of the two forces multiplied by the sine of the difference of their directions.

The net force is then the square root of the sum of the squares of the x and y components. Thus, the magnitude of the net force is 15.6 N.

Learn more about force and magnitude at : https://brainly.com/question/30033702

#SPJ11

Answer:

4

Explanation:

Speed = 2t²+2

by differentiation,

ds/dt=Velocity=4t

dv/dt=Acceleration=4

Explanation:

Refer to pic...........

The lasso, relative to least squares, is more flexible and hence will give improved prediction accuracy when its increase in bias is less than its decrease in variance. Therefore, the correct option is A.

Lasso regression is one of the most popular methods for variable selection in linear regression. It is a modification of traditional regression analysis that involves adding a penalty for high-magnitude coefficients. The method is particularly useful when dealing with datasets containing large numbers of predictors.

The lasso is a more flexible method of regression than least squares and is more effective when the increase in bias is less than the decrease in variance. Thus, the correct answer is A. More flexible and hence will give improved prediction accuracy when it increase in bias is less than its decrease in variance.

By shrinking some of the coefficients to zero, it allows for the identification of significant predictors and can produce more accurate predictions. According to the question, the lasso, relative to least squares, is more flexible. It provides improved prediction accuracy when its increase in bias is less than its decrease in variance.

Therefore, option A is correct. In option B, the increase in variance should be less than the decrease in bias, which is incorrect. In option C, the lasso is less flexible, which is incorrect as well. In option D, the increase in variance should be less than the decrease in bias, which is incorrect.

To learn more about lasso regression follow

https://brainly.com/question/25987747

#SPJ11

The length of the x-component of the vector is approximately 48.55 units.

To find the length of the x-component of the vector, we need to use trigonometry.

We can use the angle and the magnitude (length) of the vector to find the x-component using the formula:

x-component = magnitude x cos(angle)

Plugging in the values given, we get:

x-component = 52 units x cos(21⁰)

x-component = 52 units x 0.9336

Multiplying these two numbers, we get:

x-component ≈ 48.55 units

Learn more about x component of vector here: https://brainly.com/question/28225266

#SPJ1

It takes 1.196 × 10-8 seconds for the recoiling lithium atom to travel 1mm.

We know that the energy of the photon is E = 1.8488 eV. The momentum of the photon is given by:

p = E/c

where c is the speed of light.

Substituting the values we get:

p = 1.8488 × 1.6 × 10-19/3 × 108p = 6.160 × 10-28 kg m/s

By the conservation of momentum, the momentum of the lithium atom will be equal in magnitude and opposite in direction to the photon. Therefore, we can write:

|p atom| = |p photon|

p atom = 6.160 × 10-28 kg m/s

Let m be the mass of the lithium atom. We can now use the kinetic energy equation:

KE = 1/2mv^2

where KE is the kinetic energy of the atom, and v is the velocity of the atom. Initially, the atom is at rest. After the photon is emitted, the atom recoils with velocity v. Therefore, we can write:

KE = E

kinetic energy of the atom = E = 1.8488 e

V = 1.8488 × 1.6 × 10-19 Joules

v = √2E/m

where m is the mass of the lithium atom.

Substituting the value of m, we get:

v = √2 × 1.8488 × 1.6 × 10-19/6.941 × 10-26v = 8.373 × 105 m/s

Time taken to travel 1 mm is given by

t = distance/velocity

where the distance is 1 mm = 1 × 10-3 m.

Substituting the values, we get:

t = 1 × 10-3/8.373 × 105

t = 1.196 × 10-8 seconds.

Learn more about Lithium:

https://brainly.com/question/28449914

#SPJ11