Based on its caffeine concentration, the number of soda cans that would be lethal for the person drinking the soda is 131 cans of soda.
What is caffeine toxicity?Caffeine toxicity produces symptoms such as:
Headache, dizziness, anxiety, agitation, trembling, tingling in the perioral region and in the extremities, disorientation, psychosis, and seizures are all symptoms of the central nervous system (CNS).
The mass of caffeine in a drinking can of soda is 3.91 mg/oz * 12 = 46.92
The number of cans of soda that will contain 10.0 g of caffeine is calculated as follows:
10.0 g of caffeine = 10 * 1000 mg
10.0 g of caffeine = 10000 mg
The number of cans that will be lethal = 10000 / 46.92
The number of cans that will be lethal = 213 cans of soda
Learn more about toxicity at:
https://brainly.com/question/28441394
#SPJ1
how many electrons does a noble gas, other than helium, have in its highest-occupied energy level?
A noble gas, other than helium, have 8 electrons in its highest-occupied energy level.
The noble gas are a group of elements in the periodic table that have exceptional chemical stability and low reactivity due to their complete valence shell of electrons. These elements are found in the far right-hand column of the periodic table and include helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon (Rn). Unlike other elements in the periodic table, the noble gases do not readily form compounds with other elements, making them highly unreactive. This characteristic makes them useful in a variety of industrial applications, such as filling incandescent lamps, as cooling agents in cryogenics, and in the production of semiconductors. The electron configurations of the noble gases, excluding helium, follow the pattern s^2p^6, meaning that the highest-occupied energy level has 8 electrons. This full valence shell of electrons gives the noble gases their exceptional stability and non-reactivity, making them unique among the elements in the periodic table.
Learn more about noble gas here
https://brainly.com/question/13715159
#SPJ4
a gas has a pressure of 1.26 atm and accupies a volume of 7.40 l. if the gas is compressed to a volume of 2.93 l, what will its pressure be, asumming constant temprature?
According to the question, 3.26 atm will its pressure be, asumming constant temprature.
What is temprature?
Temperature is a measure of the amount of heat energy present in a system. It is measured in degrees on a variety of scales, including Celsius, Fahrenheit, and Kelvin. Temperature is a fundamental physical property that can be used to characterize the state of a system. It is an important factor in determining the speed of chemical reactions, the rate at which materials expand and contract, and the amount of energy released or absorbed. Temperature affects the behavior of gases, liquids, and solids, and it has a significant impact on the physical and chemical properties of a substance.
Using the ideal gas law, the new pressure of the gas can be calculated as follows: P2 = (1.26 atm × 7.40 L) / 2.93 L
P2 = 3.26 atm
Therefore, the pressure of the gas will be 3.26 atm when its volume is decreased to 2.93 L, assuming constant temperature.
To learn more about temprature
https://brainly.com/question/29039495
#SPJ4
classify the type of microscope based on a radiation they use
Answer:
Light vs electron
Explanation:
Light Microscope vs Electron Microscope. Light microscopes and electron microscopes both use radiation - in the form of either light or electron beams, to form larger and more detailed images of objects (e.g. biological specimens, materials, crystal structures, etc.) than the human eye can produce unaided.
You have made up a stock aqueous dye solution of known concentration equal to 500. 0 parts per million (ppm) of green dye. If you take 2. 0 mL of the stock solution and add 8. 0 mL of water to it, what would the concentration of the diluted solution be in units of ppm?
The concentration of the diluted solution be 100 ppm.
What is the Ppm solution?Chemistry uses the term PPM, or parts per million, to describe extremely low concentrations of solution. One liter of solution containing milligrams of the chemical is what is meant by this term. Technically speaking, it is a dimensionless quantity that can be used to measure lower concentrations in a solution.There are numerous scientific uses for this conversion.
It refers to how many of the one million parts that make up the entire solution a specific substance or molecule occupies. It is used to describe substance concentrations that are typically dissolved in a solvent. When there are two solutions, and one of them has a known ppm concentration, the ppm concentration can be calculated by:
ppm1 x volume = ppm2 volume
500 ppm x 2 mL = ppm2 x 10 mL
ppm 2 = 500 ppm x 2 mL/ 10 mL
ppm 2 = 100 ppm
Learn more about ppm solutions here:
brainly.com/question/1370797
#SPJ4
Liam's water experiment shows an energy change. Describe this energy change, and explain why it occurs.
The difference in the amounts of stored chemical energy between the products and the reactants causes the energy change in a chemical reaction. The enthalpy of a system is its stored chemical energy, or heat content.
What are the two types of energy changes?Exothermic reactions are chemical reactions in which energy is released as a result of bond formation. Endothermic reactions are chemical reactions in which energy is absorbed for the purpose of breaking up bonds.
Because almost all reactions involve a change in energy, energy changes are very important in chemistry. This module will teach you the terminology needed to discuss energy changes, as well as how to measure and calculate them and why they occur.
Thus, Liam's water experiment shows an energy change.
To learn more about the energy change, follow the link;
https://brainly.com/question/22255429
#SPJ1
equal volumes of 0.1 m agno3(aq) and 2.0 m nh3(aq) are mixed and the reactions represented above occur. which ag species will have the highest concentration in the equilibrium system shown below, and why?
The reaction between AgNO3 and NH3 has the following chemical equation for balance: Ag(NH3)2+ + NO3- from AgNO3 + 2NH3. As a result, the silver-ammonia complex will contain the majority of the silver ions in the equilibrium system.
AgNO3, or silver nitrate, is a chemical that is frequently utilised in a variety of industries, including photography, medicine, and scientific research. It is a white, crystalline solid that dissociates into silver ions and nitrate ions in water. It is also extremely soluble in water. Halide ions in solution are frequently detected using the reagent AgNO3, which reacts with them to produce visually identifiable insoluble silver halides. Additionally employed as an antiseptic in medicine, AgNO3 is applied topically to treat skin diseases including warts and burns. It is also a typical precursor for the creation of additional silver compounds.
Learn more about AgNO3 here:
https://brainly.com/question/17354153
#SPJ4
Answer:
Ag(NH3)2+ (aq)
Explanation:
Because Kep3 will equal 1.6 x 10^7
if 39.0 g of c6h6 reacts with excess chlorine and produces 28.0 g of c6h5cl in the reaction above, what is the percent yield of c6h5cl? the molar mass of c6h6
According to the question, the molar mass of C₆H₆ is 60.5%.
What is molar mass?
Molar mass is the mass of one mole of a substance, measured in grams per mole. It is calculated by summing the atomic masses of the atoms in the molecular formula of the substance. Molar mass can be used to calculate the mass of a given amount of a substance, or to determine the amount of a substance needed to obtain a particular mass. Molar mass is an important concept in chemistry as it is used to calculate the amount of energy released or absorbed in a chemical reaction, as well as the amount of products formed.
Molar mass of C₆H₆ = 78.11 g/mol
Moles of C₆H₆ = 39.0 g / 78.11 g/mol = 0.500 mol
Molar mass of C₆H₅Cl = 92.56 g/mol
Moles of C₆H₅Cl = 28.0 g / 92.56 g/mol = 0.301 mol
Theoretical yield of C₆H₅Cl = 0.500 mol x 92.56 g/mol = 46.28 g
Actual yield of C₆H₅Cl = 28.0 g
Percent yield of C₆H₅Cl = (Actual yield / Theoretical yield) x 100%
= (28.0 g / 46.28 g) x 100%
= 60.5%
To learn more about molar mass
https://brainly.com/question/837939
#SPJ4
Which is the correct conversion for converting 54.0 grams of Chlorine to moles of Chlorine?
Answer:
1.523143316503566 moles.
Explanation:
1 grams Chlorine = 0.028206357713029 mole using the molecular weight calculator
PLEASEEEE HELP ME IM IN NEDD OF HELP
The response is untrue, thus no. Methane (CH4) and oxygen combine to produce water and carbon dioxide. Since there are different numbers of hydrogen atoms on either side.
Why happens when methane and oxygen interact?Methane (CH4) and oxygen combine to generate water and carbon dioxide. Since there are different numbers of hydrogen atoms on either side, we can see that the process is not balanced in this instance. The quantity of oxygen atoms is the same.
Methane and carbon dioxide are converted in what way?Natural gas mostly consists of methane. Methane is released into the atmosphere where it ultimately mixes with oxygen to create additional carbon dioxide (CO2). This straightforward chemical process turns methane into carbon dioxide.
To know more about methane visit:
https://brainly.com/question/2127750
#SPJ1
when mtbe (shown) is reacted with hbr, carbons a and b will undergo nucleophilic substitution to yield two alkyl halides. by what mechanism of substitution will each c-o bond be cleaved?
when mtbe (shown) is reacted with hbr, carbons a and b will undergo nucleophilic substitution to yield two alkyl halides then by SN2 mechanism each c-o bonds will be cleaved.
When MTBE (methyl tert-butyl ether) is reacted with hydrogen bromide (HBr), the two C-O bonds in the molecule are expected to undergo an S N 2 substitution mechanism. This is because the reaction conditions are favorable for a bimolecular, concerted mechanism, where the nucleophilic (HBr) and substrate (MTBE) interact with each other to produce the products.
In the S N 2 mechanism, the C-O bonds in MTBE are cleaved via backside attack by the nucleophile, HBr. This involves the simultaneous formation of a new C-Br bond and breaking of the existing C-O bond. The attack takes place in a stereospecific manner, so that the orientation of the substrate and nucleophile determines the stereochemistry of the products. The S N 2 mechanism is typically favored under conditions where the substrate is a good leaving group and the nucleophile is a strong base.
In summary, both of the C-O bonds in MTBE are expected to be cleaved via an S N 2 mechanism when reacting with HBr.
Learn more about nucleophilic here:
https://brainly.com/question/28325919
#SPJ4
The first step in deforestation in Amazon is?
Answer:
Logging is the first step in deforestation in Amazon.
Explanation:
I don't have much to go off of, but usually with any deforestation the first step is logging the area. You must remove all the trees before you can effectively utilize the area.
A system at equilibrium contains 0. 377 mol SO2 , 0. 377 mol NO2 , 0. 673 mol SO3 , and 0. 727 mol NO. O2 is added to the container and NO reacts completely with the O2. Calculate the amount of SO3 in the container after the system returns to equilibrium
The amount of SO3 in the container after the system returns to equilibrium is 0.673 mol.
How do you calculate if a system is at equilibrium?
Equilibrium is a state in which all forces or influences that act upon a system are balanced. To calculate if a system is at equilibrium, you must determine the net force and net torque acting on the system. If the net force and net torque are both zero, then the system is at equilibrium.
The reaction between NO and O2 can be described by the following equation:
2 NO(g) + O2(g) ⇌ 2 NO2(g)
When NO reacts completely with O2, the amount of NO decreases to zero and the amount of NO2 increases to 2 * 0.727 = 1.454 mol.
The reaction between SO2 and O2 to form SO3 can be described by the following equation:
SO2(g) + O2(g) ⇌ SO3(g)
At equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction. The equilibrium constant (Kc) for this reaction can be written as:
Kc = [SO3] / [SO2][O2]
After NO reacts completely with O2 and the system returns to equilibrium, the initial concentrations of SO2 and O2 are 0.377 mol and 0.727 mol, respectively, and the final concentration of SO3 can be calculated using the equilibrium expression:
Kc = [SO3] / [SO2][O2] = [SO3] / (0.377 mol)(0.727 mol) = [SO3] / 0.274 mol^2
At equilibrium, the change in the concentration of SO3 must be equal to zero, as the system is at equilibrium. Therefore, we can write:
Δ[SO3] = [SO3]final - [SO3]initial = 0
Substituting [SO3]initial = 0.673 mol, we get:
0 = [SO3]final - 0.673 mol
[SO3]final = 0.673 mol
Therefore, the amount of SO3 in the container after the system returns to equilibrium is 0.673 mol.
To learn more about equilibrium from the link
https://brainly.com/question/12977920
#SPJ4
How many nitrogen molecules are produced from complete reaction of 12.3 L of N2O(g) according to the reaction below? Assume the density of N2O(g) is 1.48 g/L.
2 N2O(g) → 2 N2(g) + O2(g)
Answer:
Delta H = -163.14 kJ.
Explanation:
system a and system b contain the same substance. system a is a saturated vapor and is at the same temperature as system b. if system b has a lower pressure than a, what phase is system b in?
System B is in a liquid phase since it is at the same temperature as System A, but has a lower pressure.
When a substance is heated, the pressure of the vapour increases, and eventually the pressure of the vapour and the liquid become equal at the substance's boiling point. This is known as the saturated vapour point. If the pressure of the vapour is lowered, then the vapour will condense into a liquid, as is the case with System B. As a result, System B is in a liquid phase due to the lower pressure.
To learn more about liquid phase
brainly.com/question/20302012
#SPJ4
g a solution of the primary standard sodium carbonate was prepared by dissolving 3.2990 g of na2co3 in 1.000 l of water. a 25.00-ml aliquot of this solution required 28.39 ml of hydrochloric acid solution (hcl (aq)) for titration. find the molarity of the hcl solution.
The molarity is viewed as 0.00109 M if a solution sodium carbonate was prepared by dissolving 3.2990 g of na2co3 in 1.000 l of water. a 25.00-ml aliquot of this solution required 28.39 ml of hydrochloric acid solution.
The molarity of the HCl arrangement can be determined involving the fair substance condition for the response between sodium carbonate (Na2CO3) and hydrochloric corrosive (HCl):
Na2CO3 + 2 HCl - > 2 NaCl + CO2 + H2O
One mole of sodium carbonate responds with two moles of hydrochloric corrosive. We realize how much sodium carbonate utilized in the response (3.2990 g) and its molar mass (106.0 g/mol), so we can work out the quantity of moles of sodium carbonate:
n = m/M = 3.2990 g/106.0 g/mol = 0.03109 mol
We additionally know the volume of the HCl arrangement utilized in the response (28.39 ml), so we can work out its molarity:
M = n/V = 0.03109 mol/(28.39 ml/1000 L/ml) = 0.00109 M
Thus, the molarity of the HCl arrangement is 0.00109 M (adjusted to 5 huge digits).
The molarity of the HCl arrangement can be determined by finding the quantity of moles of sodium carbonate utilized in the response and separating it by the volume of HCl arrangement utilized. The quantity of moles can be found by partitioning the mass of sodium carbonate by its molar mass. The molarity is viewed as 0.00109 M.
To learn more about molarity, refer:
https://brainly.com/question/15490317
#SPJ4
if i am using a propane canister in a hot air balloon burner to take off on a typical morning flight at the albuquerque balloon festival, what is the temperature change the propane undergoes as it is throttled from its saturation pressure to the ambient pressure in the burner? is it gas?
The temperature changes of the propane as it is throttled from its saturation pressure to the ambient pressure depend on the specific condition and the pressure changes that are involved. However, propane is gas indeed.
Saturation pressure is the pressure at which a substance changes phase into a gas phase at a specific temperature. In other words, it is the pressure at which vaporization starts to occur to the substance. When a substance is heated at constant pressure, its temperature will increase until it reaches a boiling point and begin to vaporize. At this point, the saturation pressure is reached, further increasing the temperature.
For propane, the saturation pressure when the temperature is 20°C is around 8.5 atm.
Learn more about propane at https://brainly.com/question/9472786
#SPJ4
you are trying to acidify a liquid in a breaker, but no matter how much hcl (strong acid) you dump in the liquid, the ph remains at 7. the liquid in the breaker can best be described as a
The given solution is a buffer.
When acidic or basic components are added to a buffer solution, it can withstand changes in pH. The solution's pH can be maintained relatively stable by neutralizing small amounts of added acids or bases. This is important for processes and reactions that require a specific and stable pH range. A buffer is an aqueous acid or base solution consisting of a mixture of a weak acid and its conjugate base or vice versa. Addition of a small amount of strong acid or strong base hardly changes the pH.
Learn more about buffer
brainly.com/question/13076037
#SPJ4
convert 125 g of NaCl to mols
125 grams of NaCl is equivalent to 2.14 moles
How to calculate moles from mass?The number of moles of a substance can be calculated from the mass using the following expression:
moles = mass ÷ molar mass
According to this question, there are 125g of NaCl (sodium chloride) in a solution. The number of moles of the substance can be calculated as follows:
moles = 125g ÷ 58.5g/mol
moles = 2.14 moles
Therefore, 2.14 moles of the sodium chloride is present.
Learn more about moles at: https://brainly.com/question/26416088
#SPJ1
Lead is melted and is poured into a mold to make fishing weights
Lead is melted and is poured into a mold to make fishing weights. This is an example of a physical change.
Chemical or physical changes are both possible. Anything that has mass and takes up space is referred to as "matter." It has both physical and chemical qualities and is composed of small particles.
A sort of change known as physical change occurs when the physical characteristics of matter change. Physical changes include those in color, odor, solubility, and the condition of matter, among others.
The chemical makeup or content of matter are not altered after a physical transformation. The internal makeup is unaffected as molecules rearrange themselves during this transformation. The chemical attribute is unaffected by a physical change.
To know more about chemical change
https://brainly.com/question/2591189
#SPJ4
The complete question is
Lead is melted and is poured into a mold to make fishing weights. This is an example of a________change.
1) physical
2)chemical
Two balls P and Q simultaneously hit a stationary ball R. The direction in which P was moving when it hit R, and the final direction in which R moves are shown. Which of these could be the direction in which Q was moving when it hit R.
The direction of the impact is the direction of the ball R.
What is the direction of impact?
The direction of impact refers to the direction in which a force is applied to an object. It can be described as the line along which a force is transmitted into an object, and can be unidirectional or multidirectional.
The direction of impact is important in fields such as physics, engineering, and material science, as it affects how an object reacts to the applied force and the resulting damage or deformation. In this case, the direction of the impact is the direction that is moved by ball R.
Learn more about impact:https://brainly.com/question/30460187
#SPJ1
1.The boiling point of helium is 4 K. When helium boils, what interactions and/or bonds are overcome?
2. The boiling point of hydrogen is 20 K. When hydrogen boils, what interactions and/or bonds are overcome?
3. What interactions and/or bonds are overcome when hydrogen at 30 K is heated to 6000 K?
1. Helium has a boiling point of 4 k, and as it does so, the London dispersion force breaks bonds and interactions.
2. Helium has a boiling point of 20 k, and as it does so, the London dispersion force breaks bonds and interactions.
3. Hydrogen is able to break covalent bonds when heated from 30 K to 6000 K.
The least powerful bond-interaction force is the London dispersion force. The atoms of a substance are temporarily attracted to one another. Two atoms' electrons combine in a way that causes them to form dipoles. This force underlies every helium gas reaction.
When two species share electrons, a covalent link is created. Usually, they happen amongst compounds with comparable electronegativities. Bond strength is based on how many bonds there are between the atoms.
To learn more about types of bonds,
https://brainly.com/question/10777799
#SPJ4
how many hydrogen bonds are found between each complementary base pairing?
Andrea's ballpoint pen leak ink, a permanent onto her white blouse. Her friends suggested that she soaked the stain in nail polish remover, in rubbing alcohol or wash the stain in soap or water. Andrea asked you, a good science student which of these suggestions she should try. Plan and design an experiment to identify which solvent is best for removing ink stain from Andrea's blouse
Experiment to determine best solvent for ink stain removal: soak 4 identical cloths with ink stains in nail polish remover, rubbing alcohol, soap+water, and water, observe stain removal, repeat 3 times, analyze results to find best solvent.
Here's a plan for an experiment to identify which solvent is best for removing an ink stain from a white blouse:
Obtain the following solvents: nail polish remover, rubbing alcohol, soap, and water.Cut four identical pieces of white cloth.Place an ink stain on each piece of cloth using a ballpoint pen.Soak one cloth in nail polish remover, one in rubbing alcohol, one in soap mixed with water, and one in water only.Soak the cloths for 10 minutes, then remove and gently dab the cloths to remove excess solvent.Observe and record the extent of stain removal on each cloth.Repeat the experiment three times to ensure accuracy and consistency of results.Analyze the results and determine which solvent was the most effective in removing the ink stain from the white cloth.Learn more about Stain:
https://brainly.com/question/29775274
#SPJ4
QuestionWhen the concentration of solutes is greater outside the cells than inside the cells, the solution outside the cells is AIsotonicBHypertonicCHypotonicDNone of the aboveMedium
When the concentration of solutes is greater outside the cells than inside the cells, the solution outside the cells is Hypotonic (C)
What is Hypotonic solution?The term "hypotonic solution" describes a solution that, when passed through a semipermeable membrane, has a lower solute concentration than other solutions. A solution like this one will result in a lower solute concentration as well as an overall flow of water within the cell. This results in the swelling breaking apart. As a direct consequence of this, the osmotic pressure of a hypotonic solution is significantly lower than the osmotic pressure of other solutions.
The osmotic potential of a hypotonic solution causes water molecules to move into a cell from outside the cell. When water molecules continue to diffuse into a cell, the cell can enlarge. And it can cause the cell to rupture or undergo cytosis. But unlike animal cells, plant cells have a solid cell wall and are less likely to burst.
To learn more about hypotonic solution, click here:
https://brainly.com/question/13179291
#SPJ4
What carbonyl compounds might you start with to prepare the following compounds by Grignard reaction? List all possibilities.a) 2-methyl-2propanalb) 1-ethylcyclohexanolc) 3-phenyl-3-pentanold) 2-phenyl-2-pentanol
The reaction of carbonyl compounds with Grignard reagents to prepare the following compounds a)2-methyl-2propanal b) 1-ethylcyclohexanol c) 3-phenyl-3-pentanol d) 2-phenyl-2-pentanol is present above in figure.
The Grignard reagent is formed by reacting an organomagnesium compound with haloalkane in ether solvent. The carbon atoms in Grignard's reagent are partially negatively charged and serve as good nucleophiles. Grignard reagents usually react with carbonyl compounds (aldehydes or ketones) to form alcohols.
Reacts with formaldehyde to form primary alcohol.Forms secondary alcohols when interacting with other aldehydes. When interacting with ketones, tertiary alcohols are formed.Now, a) For the preparation of 2-methyl-2-propanal, we have to use actone ( carbonyl compound).
b) For the preparation of 1-ethylcyclohexanol, we have to use cyclohexane ( carbonyl compound).
c) For the preparation of 3-phenyl-3-pentanol, we have to use 3-pentanone ( carbonyl compound).
d) For the preparation of 2-phenyl-2-pentanol, we have to use 2-pentanone ( carbonyl compound). All carbonyl compounds are reactied with respective grignard reagents.
For more information about grignard reagents, visit :
https://brainly.com/question/16040954
Complete question:
What carbonyl compounds might you start with to prepare the following compounds by Grignard reaction? List all possibilities.
a) 2-methyl-2propanal
b) 1-ethylcyclohexanol
c) 3-phenyl-3-pentanol
d) 2-phenyl-2-pentanol
Sulfuric acid is produced by first burning sulfur to produce sulfur trioxide gas
2S(s) + 3O2(g) → 2SO3(g)
then dissolving the sulfur trioxide gas in water
SO3(g) + H2O(l) → H2SO4(l)
Calculate the mass of sulfuric acid produced if 1.25 g of sulfur is reacted as indicated in the above equations.
The mass of sulfuric acid produced is 2.77 g.
To calculate the mass of sulfuric acid produced, we need to use stoichiometry. Here are the step-by-step calculations:
So the mass of sulfuric acid produced is 2.77 g.
Learn more about sulfuric acid brainly.com/question/10220770
#SPJ1
Unstable isotopes undergo radioactive decay. What is something that can occur during radioactive decay?
During radioactive decay Unstable isotopes can occur by releasing particles.
Isotopes are atoms with the same number of protons but differing numbers of neutrons. They differ in mass, which affects their physical characteristics even if they have nearly identical chemical properties. There are unstable isotopes that emit radiation as well as stable isotopes that do not. These are referred to as radioisotopes.
Unstable isotopes undergo radioactive decay.The unstable isotope can release particles like alpha particles, beta particles, or gamma rays during radioactive decay. By emitting particles, the isotope transforms into a different element or isotope and becomes stable.
Learn more about Isotopes, https://brainly.com/question/11680817
calculate the ph for each of the cases in the titration of 35.0 ml of 0.190 m naoh(aq) with 0.190 m hbr(aq).
The ph for each of the cases in the titration of 35.0 ml of 0.190 m Noah(aq) with 0.190 m hbr(aq) is 13.02 and 7.
To calculate the pH for each of the cases in the titration of NaOH with HBr, we need to determine the amount of HBr that has been added to NaOH at each point in the titration. We can use the balanced chemical equation for the reaction to do this:
NaOH(aq) + HBr(aq) → NaBr(aq) + H2O(l)
moles of HBr = moles of NaOH
moles of NaOH = concentration × volume
moles of NaOH = 0.190 M × 0.0350 L = 0.00665 mol
pH = 14.00
pH = 7.00
moles of NaOH remaining = 0.00665 - 0.00300 = 0.00365 mol
concentration = moles / volume
to calculate the concentration of NaOH remaining in the solution:
concentration of NaOH remaining = 0.00365 mol / 0.0350 L = 0.104 M
Kw = [H+][OH-] = 1.0 × [tex]10^-14[/tex]
[H+] = Kw / [OH-] = 1.0 ×[tex]10^-14[/tex] / 0.104 = 9.62 × [tex]10^-14\\[/tex] M
pH = -log[H+] = -log(9.62 × [tex]10^-14[/tex]) = 13.02
Therefore, the pH of the solution 13.02 and 7.
Learn more about ph here:
https://brainly.com/question/26856926
#SPJ4
why would determining the heat capacity of an unknown be useful information?
Determining the heat capacity of an unknown material can be a useful tool for understanding its properties.
Heat capacity is a measure of the amount of heat energy required to raise the temperature of a material by a certain amount. By measuring the heat capacity of a material, scientists can gain insight into its thermal properties and understand how it will react to changes in temperature. For example, a material with a high heat capacity requires more heat energy to warm it up, but it will also take longer to cool off when the temperature is reduced. In addition, the heat capacity can be used to calculate the amount of energy needed to convert a material from solid to liquid or liquid to gas
Learn more about heat capacity here:
https://brainly.com/question/28302909
#SPJ4
Please helpppp with my chemistry homework
Answer:
25.34 g of KCI.
Explanation:
To calculate the mass of KCI produced, you can use the balanced chemical equation and stoichiometry.
Given the balanced equation:
[tex]1 mol\: K + 1 mol Cl_2 \rightarrow 1 mol KCI[/tex]
Since we have 0.34 mol Cl2, we can calculate the amount of K needed:
0.34 mol Cl2 / 1 mol Cl2 = 0.34 mol K
Using the molar mass of KCI (74.55 g/mol), we can calculate the mass of KCI produced:
0.34 mol * 74.55 g/mol = 25.34 g of KCI
So the answer is: 25.34 g of KCI.