Answer:
The amount of power will be increased.
Explanation:
If the work remains constant but the time is reduced the power increases. Since power is defined as the relationship between work overtime. By means of the following equation, we can see this relationship.
[tex]P=W/t[/tex]
where:
P = power [Watts]
W = work [J] (units of joules)
t = time [s]
Let's assume with an example the above written.
If we have an electric motor that exerts a work of 950 [J], and the time used is 5 [s], the power is:
[tex]P = 950/5\\P = 190 [W][/tex]
Now if we want to accelerate the work done and use 2 seconds for the time, we will have:
[tex]P=950/2\\P=475 [W][/tex]
We want to see how maintaining the work constant but reducing the time in which it occurs affects the power. We will see that the power increases.
We define power as the amount of work done per unit of time.
So we can compute power as the quotient between the work done and the time in which it is done.
So, if we reduce the time in which the work is done, then the denominator is smaller, thus, the power will be larger.
This means that maintaining the work constant, and reducing the time in which it is done, increases the amount of power exerted.
If you want to learn more, you can read:
https://brainly.com/question/3854047
An 800 kHz radio signal is detected at a point 3.2 km distant from a transmitter tower. The electric field amplitude of the signal at that point is 320 mV/m. Assume that the signal power is radiated uniformly in all directions and that radio waves incident upon the ground are completely absorbed. The magnetic field amplitude of the signal at that point, in nT, is closest to:
Answer:
1.07 nT
Explanation:
We know that E/B = c where E = electric field amplitude = 320 mV/m = 0.32 V/m, B = magnetic field amplitude and c = speed of light = 3 × 10⁸ m/s.
So, B = E/c
Substituting E and c into B, we have
B = E/c
= 0.32 V/m ÷ 3 × 10⁸ m/s
= 0.1067 × 10⁻⁸ T
= 1.067 × 10⁻⁹ T
= 1.067 nT
≅ 1.07 nT
What kind of energy involves the flow of negative charges?
Answer: static electricity
Explanation: The movement of charged particles through a wire or other medium is called current or electricity. There is also static electricity, which results from an imbalance or separation of the positive and negative charges on an object. Static electricity is a form of electrical potential energy
A new copy of DNA is built from individual genes . The enzyme unwinds the DNA molecule, allowing replication to begin.
Answer:
This question is incomplete, the question is asking which enzyme unwinds the DNA molecule during DNA replication.
The answer is DNA HELICASE
Explanation:
DNA replication is the process whereby DNA molecule (genetic material) is duplicated in the genome i.e. DNA makes an identical copy of itself. The process of DNA replication is carried out in a step by step manner with various enzymes functioning specifically throughout the process.
The first step is to unwind the double-stranded DNA molecule into two single strands. The two single strands serves a templates to synthesize another pairing strand to make two DNA molecules in total. The unwinding of the DNA strands is carried out by an enzyme called DNA helicase.
Answer:
A new copy of DNA is built from individual
✔ nucleotides
.
The enzyme
✔ helicase
unwinds the DNA molecule, allowing replication to begin.
Explanation:
An airplane flies at 40 m/s at an altitude of 50 meters. The pilot drops a heavy package which falls to the ground. Where, approximately, does the package land relative to the plane's new position
Answer:
128 m
Explanation:
From the question given above, the following data were obtained:
Horizontal velocity (u) = 40 m/s
Height (h) = 50 m
Acceleration due to gravity (g) = 9.8 m/s²
Horizontal distance (s) =?
Next, we shall determine the time taken for the package to get to the ground.
This can be obtained as follow:
Height (h) = 50 m
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) =?
h = ½gt²
50 = ½ × 9.8 × t²
50 = 4.9 × t²
Divide both side by 4.9
t² = 50 / 4.9
t² = 10.2
Take the square root of both side
t = √10.2
t = 3.2 s
Finally, we shall determine where the package lands by calculating the horizontal distance travelled by the package after being dropped from the plane. This can be obtained as follow:
Horizontal velocity (u) = 40 m/s
Time (t) = 3.2 s
Horizontal distance (s) =?
s = ut
s = 40 × 3.2
s = 128 m
Therefore, the package will land at 128 m relative to the plane
Four identical bulbs are set up in a series circuit with an 8V battery. The voltage across each bulb is...
Explanation:
Voltage across each bulb = 8V / 4 = 2V (Potential difference)
Answer:
2 (8 ÷ 4) volts.
According to the passage, in a series circuit, “the voltage is shared across all the bulbs.” If the bulbs are of equal resistance, the voltage across each will be ¼ of the battery’s 8 volts or 2 volts.
i got it right on flocabulary.com
Explanation:
Which of the following is true about the plants in the picture below?*
5 points
Tall is represented by (T) and short is represented by (t).
TT
Tt
They have the same phenotypes
They have the same genotypes.
They have the same alleles.
They are both short
Explanation:
We know that for the plant;
Tall is represented by T
Short is represented t
Phenotypically, TT and Tt have the same expression.
The phenotype of an organism denotes the observable feature it possesses. Although determined by the genetic composition but the environment plays a very important role in its expression.
The genotype is the genetic make up of an organism. TT and Tt denotes the genes that occupy positions in the nucleus of the cell.
Both TT and Tt shows that the organism is tall. t is short and recessive.
The vertical (top to bottom) parts of periodic table are called groups or
a car initially traveling at 5 m/s accelerates for 2 seconds at 3 m/s. how far does it travel during this time?
Answer:
x = 16 [m]
Explanation:
This problem can be solved using the following equation of kinematics.
[tex]v_{f}=v_{o}+a*t[/tex]
where:
Vf = final velocity [m/s]
Vo = initial velocity = 5 [m/s]
a = acceleration = 3 [m/s²]
t = time = 2 [s]
[tex]v_{f}=5+3*(2)\\v_{f}=11[m/s][/tex]
Now we can find the displacement using the following equation of kinematics.
[tex]v_{f}^{2} =v_{o}^{2} +2*a*x\\11^{2}=5^{2} +2*3*x\\96=6*x\\x=16[m][/tex]
A container is filled with liquid the depth of the liquid is 60 CM if exertingc in pressure is 2000pa. calculator the density of a liquid
Answer:
The density of the liquid is 340.136 kg/m³
Explanation:
Given;
depth of liquid in the container, h = 60 cm = 0.6 m
pressure of the liquid, P = 2000 Pa = 2000 N/m²
The pressure of the liquid is calculated as ;
P = ρgh
where;
ρ is density of the liquid
g is acceleration due to gravity = 9.8 m/s²
h is depth of the liquid
Make the density (ρ) the subject of the formula;
[tex]\rho = \frac{P}{gh} \\\\\rho = \frac{2000}{9.8 \times 0.6}\\\\\rho = 340.136 \ kg/m^3[/tex]
Therefore, the density of the liquid is 340.136 kg/m³
THIS IS THE LAST TIME I POST THIS QUESTION SO PLEASE JUST ANSWER IT AND IF YOU HAVE A QUESTION THEN PUT IT ON THE COMMENTS NOT THE ANSWER
Answer:
1. Name 3 items in nature that contain high concentrations of proteins.
Answer: Animal products like milk, eggs, and meat have really concentrated protein. (nuts and plants you can eat also are really concentrated)
2. What is similar about the primary structure of each protein?
Answer: The primary structures have a balanced level of amino acids.
3. For the proteins you researched, how does the structure help the protein perform its function?
Answer: The primary structure is reflected on its folded structure and that folded structure determines the proteins function.
Explanation:
its kinda hard to answer the questions without you telling us which 2 proteins you wanted to research but i think the easiest options would be eggs and meat.
Dont decorate a tree in front of a cat lol we finished decorating the tree last night and the cat climbed up the tree and knocked it over XD
Which option is a compound?
A. Oxygen
B. Carbon
C. Carbon dioxide
D. Air
Answer: Carbon Dioxide.
Explanation: Oxygen and Carbon are both elements, so they can’t be compounds. Air is a mixture of gasses, not a compound.
A gas sample occupies 6.2 L at a pressure of 201 kPa. What volume will it occupy if the pressure is increased to 335 kPa? The temperature remains the same.
Answer: The volume of the gas at the increased pressure will decrease to 3.72L.
Explanation:
Boyle's law states that the volume occupied by a fixed mass of gas is inversely proportional to the pressure, provided temperature is kept constant. That is,
PV=K
P1V1 =P2V2
P1= 201 kpa
V1 = 6.2L
P2= 335kpa
V2= ?
Making V2 the subject of formula,
V2= P1V1/P2
V2= 201× 6.2/335
V2= 1246.2/336
V2= 3.72L
Thus, the volume of the gas decreases as the pressure increases. Hope this helps, thanks
Answer:
The volume will be 3.72 L.
Explanation:
We can find the new volume by using the Ideal Gas Law:
[tex] PV = nRT [/tex]
Where:
P: is the pressure
V: is the volume
n: is the number of moles
R: is the gas constant
T: is the temperature
Initially, we have:
[tex]P_{1}V_{1} = nRT[/tex] (1)
with V₁ = 6.2 L, P₁ = 201 kPa and nRT = constant
When the pressure is increased we have:
[tex] P_{2}V_{2} = nRT [/tex] (2)
with V₂ =?, P₂ = 335 kPa and nRT = constant
By equating (1) and (2) we have:
[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]
[tex] V_{2} = \frac{P_{1}V_{1}}{P_{2}} = \frac{201 kPa*6.2 L}{335 kPa} = 3.72 L [/tex]
Therefore, the pressure is increased to 335 kPa the volume will be 3.72 L.
I hope it helps you!
why it is difficult to run fast in sand
Explanation:
The force exerted by our foot on the sand is less because time taken is large so it is difficult to run fast on sand.
hope it will help you
state Newton second law of motion
Newton 2ns law state that external forces that exert on an object is proportional to the mass and the acceleration of an object
Formula : ΣF = ma
ask me if you're confused with my answer
2. State law of conservation of
momentum and apply conservation of
momentum in elastic collision of two
objects.
Answer:
In collisions between two isolated objects Newton's third law implies that momentum is always conserved. In collisions between two isolated objects momentum is always conserved. Kinetic energy is only conserved in elastic collisions.
Explanation:
A block has a length of 1.0 cm, a width of 3.1 cm, and a height of 2.5 cm. What is the block's volume to the nearest tenth?
Answer:
8
Explanation:
1.0 × 3.1 × 2.5 = 7.75 cm^3
nearest tenth 8cm^3
the force measuring instrument is called
Answer:
A force gauge (also called a force meter) is a measuring instrument used to measure forces. Applications exist in research and development, laboratory, quality, production and field environment. There are two kinds of force gauges today: mechanical and digital force gauges.
If a car has a kinetic energy of 40000 J and is moving at a velocity of 25 m/s, what is the mass of the car? KE=1/2mv
Answer:
3200 Kg
Explanation:
Just apply the formula:
40.000 = 1/2 . m . 25
80.000 = 25m
m = 80.000/25
m = 3200 Kg
A book weighing 2 Newtons is at rest on a table. The net force on the book is zero.
TRUE
FALSE
Answer: I think its True
role play pokimon only
Answer:
huh
Explanation:
im so confused
Answer:
eevee
Explanation:
A beam of red light and a beam of violet light each deliver the same power on a surface. For which beam is the number of photons hitting the surface per second the greatest
Options are;
(a) the red beam
(b) the violet beam
(c) it is the same for both beams
(d) cannot answer this without knowing the light intensity
Answer:
A: Red Beam
Explanation:
The energy of a photon is given by the formula;
E = hc/λ
Where;
h is Planck's constant
c is speed of light
λ is wavelength
From online sources, wavelength of red light is greater than that of violet.
Thus, it means that the value of E for red light will be lesser than that of violet since the denominator under red light will be larger. Therefore, the beam of red light will have the greatest number of photons hitting the surface per second.
The Planck's equation and the definition of power allow you to find the result for which beam has the largest number of photons is:
The red beam has more photons than the violet beam.
The energy of a photon is given by the Planck's equation.
E = h f
Where h is the Planck constant and f the frequency.
The speed of light is related to wavelength and frequency.
c = λ f
f = [tex]\frac{c}{\lambda }[/tex]
Let's substitute
E = [tex]\frac{hc}{\lambda}[/tex]
Power is defined as energy per unit of time.
P = W / t
P t = W
The wavelength of red light, in the order of 700 nm, is greater than the wavelength of violet light, which is on the order of 400 nm, therefore the energy of a photon of red light is less than the energy of a photon of violet light.
[tex]E_{red} < E_{violet}[/tex]
The total energy deposited is the number of photons times the energy of each photons.
W = [tex]#_{photons} \ E_o[/tex]
They indicate that the power delivered by the two rays is the same.
[tex]P_{red} = P_{violet}[/tex]
#_ {red photons} [tex]E_{o \ red}[/tex]d = #_{photons violet} [tex]E_{o \ violet}[/tex]
[tex]number_{red \ photons} = \frac{E_{violet}}{E_{red}} \ number _{violet \ photons}[/tex]
The amount of energy of the violet photons is greater than the amount of energy of the red photons.
[tex]\frac{E_{violet}}{E_{red}} > 1[/tex]
Consequently, to leave the same power, there must be more red photons than violet wavelength photons.
In conclusion, using Planck's equation and the definition of power, we can find the result for which beam has the greatest number of photons is:
The red beam has more photons than the violet beam.
Learn more here: brainly.com/question/5528489
will give Brainliest to correct
the original source of all sand is:
beaches
oceans
rocks
rivers
Answer:
The original source of all sand is rocks.
Hope I helped sorry if I didnt
Answer:
answer is rocks
Explanation:
It’s rocks because all sand it Little Rock’s that have been smashed into smaller pieces over the years and decade, and that’s how rivers go sand to because some of the broke down rocks would fall into the river and eventually be carried in the ocean and washed in shore. And that’s how we got beaches
A race car moves along a circular track at a speed of 0.512 m/s. If the car's centripetal acceleration is 15.4 m/s2, what is the distance between the car and the center of the track?
Answer:
The radius is [tex]r = 0.0170 \ m[/tex]
Explanation:
From the question we are told that
The speed at which the race car moves is [tex]v = 0.512 \ m/s[/tex]
The centripetal acceleration is [tex]a _r = 15.4 \ m/s[/tex]
Generally the centripetal acceleration is mathematically represented as
[tex]a_r = \frac{v^2 }{r}[/tex]
=> [tex]15.4 = \frac{0.512^2 }{ r}[/tex]
=> [tex]r = 0.0170 \ m[/tex]
A ball of Mass M is swung in a vertical circle with a constant tangential speed. Figure 1 shows the forces exerted on the ball at the top of the circle, and Figure 2 shows the forces exerted on the ball at the bottom of the circle. Which of the following is an expression for the centripetal acceleration of the ball in terms of M, T1, T2, and any fundamental constants?
Answer:
T1+T2/2M
Explanation:
The expression for the centripetal acceleration for the vertical circle is [tex]a_c = \frac{T_1 + T_2 }{2m}[/tex].
In a vertical circular motion, the tension of the swing at the top of the circle is given as;
[tex]T_1 =m a_c_{top} - mg\\\\T_1 = ma_c - mg\\\\mg = ma_c - T_1[/tex]
The tension of the swing at the bottom of the circle is given as;
[tex]T_2 = ma_{bottom} + mg\\\\T_2 = ma_c + mg[/tex]
solve the two equations together;
[tex]T_2 =ma_c + ( ma_c -T_1)\\\\T_2 = ma_c + ma_c - T_1\\\\T_2 + T_1 = 2ma_c\\\\a_c = \frac{T_1 + T_2}{2m}[/tex]
Thus, the expression for the centripetal acceleration for the vertical circle is [tex]a_c = \frac{T_1 + T_2 }{2m}[/tex].
Learn more here:https://brainly.com/question/14881568
What is the random walk?
Answer:
In mathematics, a random walk is a mathematical object, known as a stochastic or random process, that describes a path that consists of a succession of random steps on some mathematical space such as the integers.
Explanation:
A bullet of mass 4.0g is fired from a rifle of mass 2.0kg with muzzle velocity of 380m/s. What is the initial recoil velocity of the rifle?
Answer:
v = 0.76 [m/s]
Explanation:
The linear momentum generated by the shot must be calculated. This can be calculated using the following expression.
[tex]P=m*v\\[/tex]
where:
P = linear momentum [kg*m/s]
m = mass [kg]
v = velocity [m/s]
[tex]P=0.004*380\\P=1.52[kg*m/s][/tex]
Now we can calculate the recoil velocity, because the momentum is equal for the rifle.
[tex]P=m*v\\v = P/m\\v = 1.52/2\\v = 0.76[m/s][/tex]
Francine is standing on the edge of a cliff. She determines that she has 6615J of gravitational potential energy relative to the bottom of the cliff. If she has a mass of 45kg, how high is the cliff?
Answer:
h = 14.98 [m]
Explanation:
We can calculate this height using the definition of potential energy, which tells us that this energy is equal to the product of mass by gravitational acceleration by height. In this way we can find the height, by means of the following equation:
[tex]E_{pot}=m*g*h[/tex]
where:
Epot = potential energy = 6615 [J]
m = mass = 45 [kg]
g = gravity acceleration = 9.81 [m/s²]
h = elevation [m]
[tex]6615 = 45*9.81*h\\h = 14.98 [m][/tex]
Which of the following would have the least amount of inertia? Assume all the bags are the same size.
bag of rocks
bag of feathers
bag of bricks
bag of sand
A car accelerates at a rate of 2.0 m/s2. If its original speed is 8.0 m/s, how many seconds will it take the car to reach a final speed of 28.0 m/s?
Answer:
[tex]\huge\boxed{\sf Time = 10 \ seconds}[/tex]
Explanation:
Given:
Initial Velocity = [tex]\sf V_{i}[/tex] = 8.0 m/s
Final Speed = [tex]\sf V_{f}[/tex] = 28.0 m/s
Acceleration = a = ?
Required:
Time = t = ?
Formula:
[tex]\sf a = \frac{V_{f} - V_{i}}{t}[/tex]
Solution:
[tex]\sf 2 = \frac{28-8}{t} \\\\2 = \frac{20}{t} \\\\t = \frac{20}{2} \\\\t = 10 \ seconds\\\\\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807