Answer:
7
Explanation:
7
n
w
t
why doesn't a radio operating with two batteries function when one of the batteries is reversed?
Answer:
If you have two batteries and they have precisely the same voltage then placing one backwards will effectively cancel out the voltages and no current will flow. However, batteries aren't like that. The slightest difference in voltages mean that current will flow.
Explanation:
How fast were both runners traveling after 4 seconds?
40
Distance (in yards)
30
20
10
1
2.
3
0
Time in seconds
Answer:
they were fast ⛷⛷
If you push with a power of 20 Watts
on a 150 Newton object, how long would
it take to push it over the 4.3 m?
Answer:
32.25 s
Explanation:
From the question,
P = W/t.............. Equation 1
Where P = Power, W = work done, t = time.
But
W = F×d................. Equation 2
Where F = force and d = distance
Substitute equation 2 into equation 1
P = F×d/t............... Equation 3
make t the subject of euqation 3
t = (F×d)/P............. Equation 4
Givn: F = 150 N, d = 4.3 m, P = 20 watts.
Substitute these values into equation 4
t = (150×4.3)/20
t = 32.25 s
What is local business?explain with exampls
Sound travels at a speed of 330 meters/second. If Denise hears a police siren 150 meters away, approximately how long did it take for the siren sound to
travel from the police vehicle to her?
Answer:
It went about 2 meters away
Explanation:
Two students Tim and Alane travel to South Dakota. Tim stands on Earth’s surface and enjoys some sunshine. At the same time, Alane descends into a gold mine where neutrinos are detected, Although the photon at the surface and the neutrinos in the mine arrive at the same time, they have had very different histories. Describe the differences.
Answer:
Explanation:
Neutrinos are otherwise called leptons. They are principal particles. A lepton is a rudimentary half-spin molecule that doesn't go through solid reactions. Neutrinos are not usually charged and exceptionally light weighted so they once in a while interface with other matter. Neutrinos are light weighted. Their mass is around 10⁻⁷ kg. A neutrino possesses a small radius, too little to ever be estimated. A little span and very less mass make them imperceptible. Since neutrinos have next to no mass. they travel at almost the speed of light and thus they arrive at the outside of the Sun in only 2 seconds, dissimilar to photons which take convoluted ways to arrive at the Sun's surface in a huge number of years.
The photon and neutrino, both were made in the Sun's center yet on various occasions. The neutrino is only a couple of minutes old though the photon is around 1,000,000 years of age. At the point when the photon was made in the Sun's center. it needed to venture out to the outside of the Sun. in any case, rather because of its hefty mass and cooperation with other matter, it headed out a crisscross way to the surface. Ordinarily, it was repulsed and it was sent back to the middle where it needed to begin once more. It required a large number of years for a photon to arrive at the outside of the Sun.
Nonetheless, when it arrived at the Sun's surface, it required just 8.8 minutes for the photon to arrive at Earth. The neutrino was anyway made only a couple of minutes prior in the Sun's center. Since it has an entirely irrelevant mass, little size, and no charge, it didn't interface with its environmental factors. So it just required 2 seconds for the neutrino to arrive at the Sun's surface. When it arrived at the Sun's surface, it arrived at the earth in about 8.8 minutes. with the photon. So both, photon and neutrino have various histories as the two of them were made at a hole of around 1,000,000 years.
Linearly polarized light whose Jones vector is [0 1] (horizontally polarized) is sent through a train of two linear polarizers. The first is oriented with its transmission axis at 45 degrees and the second has its transmission axis vertical. Show that the emerging light is linearly polarized in the vertical direction; that is, the plane of polarization has been rotated by 90 degrees.
Answer:
Following are the solution to the given question:
Explanation:
The input linear polarisation was shown at an angle of [tex]2 \mu[/tex]. It's a very popular use of a half-wave plate. In particular, consider the case [tex]\mu = 45 \pm[/tex], at which the angle of rotation is [tex]90\pm[/tex]. HWP thereby provides a great way to turn, for instance, a linear polarised light that swings horizontally to polarise vertically. Illustration of action on event circularly polarized light of the half-wave platform. Customarily it is the slow axis of HWP that corresponds to either the rotation. Note that perhaps the vector of polarization is "double-headed," i.e., the electromagnetic current swinging back and forward in time. Therefore the turning angle could be referred to as the rapid axis to reach the same result. Please find the attached file.
Use the drop-down menus to complete each statement about tornado safety.
Before a tornado warning occurs, you should
✔ have a disaster plan ready.
If you’re indoors during a tornado, you should
✔ go to the basement.
If you’re outdoors during a tornado, you should
✔ lie in a ditch or low-lying area.
Answer:
correct tysmm
Explanation:
what is the definition of mutual flux?
Answer:
Is where two or more inductors are “linked” so that voltage is induced in one coil proportional to the rate-of-change of current in another
35.15 .. Coherent light with wavelength 600 nm passes through two very narrow slits and the interference pattern is observed on a screen 3.00 m from the slits. The first-order bright fringe is at 4.84 mm from the center of the central bright fringe. For what wavelength of light will the first-order dark fringe be observed at this same point on the screen
Answer:
[tex]1.199\ \mu\text{m}[/tex]
Explanation:
[tex]\lambda[/tex] = Wavelength = 600 nm
D = Distance of the light source from screen = 3 m
y = Distance of first order bright fringe from center = 4.84 mm
d = Distance between slits
m = Order = 1
We have the relation
[tex]y=\dfrac{D\lambda}{d}\\\Rightarrow d=\dfrac{D\lambda}{y}\\\Rightarrow d=\dfrac{3\times 600\times 10^{-9}}{4.84\times 10^{-3}}\\\Rightarrow d=0.0003719\ \text{m}[/tex]
From the question we have
[tex]y=\dfrac{\dfrac{1}{2}3\lambda}{d}\\\Rightarrow \lambda=\dfrac{2}{3}yd\\\Rightarrow \lambda=\dfrac{2}{3}\times 4.84\times 10^{-3}\times 0.0003719\\\Rightarrow \lambda=0.000001199\ \text{m}=1.199\ \mu\text{m}[/tex]
The required wavelength of light is [tex]1.199\ \mu\text{m}[/tex].
how many cubic feet are in 6,117 ounces
6.388 or 6.388468 cubic feet..
not sure
Soap bubbles can display impressive colors, which are the result of the enhanced reflection of light of particular wavelengths from the bubbles' walls. For a soap solution with an index of refraction of 1.21, find the minimum wall thickness that will enhance the reflection of light of wavelength 711 nm in air.
Answer:
the minimum wall thickness that will enhance the reflection of light is 146.9 nm
Explanation:
Given the data in the question;
At the first interface, a phase shift occurs as the incident light is in air that has less refractive index compare to the thin film of soap bubble.
At the second interface, no shift occurs,
condition for constructive interference;
t = ( m + 1/2) × λ/2n
where m = 0, 1, 2, 3 . . . . . .
now, the condition for the constructive interference;
t = mλ/2n
where t is the thickness of the soap bubble, λ is the wavelength of light and n is the refractive index of soap bubble.
so the minimum thickness of the film which will enhance reflection of light will be;
t[tex]_{min[/tex] = ( m + 1/2) × λ/2n
we substitute
t[tex]_{min[/tex] = ( 0 + 1/2) × 711 /2(1.21)
t[tex]_{min[/tex] = 0.5 × 711/2.42
t[tex]_{min[/tex] = 0.5 × 293.80165
t[tex]_{min[/tex] = 146.9 nm
Therefore, the minimum wall thickness that will enhance the reflection of light is 146.9 nm
What is the magnitude of velocity for a 3,100 kg car possessing 4,100 kg•m/s of momentum?
Answer:
my c-ock and balls be rotating im gunna be hxrny all day every day im gunna f-u-ck u and r-ape ur family girls should go back to the kitchen and hope not to be beat by their husband uh yea mhm girls desurve to be r-aped f-u-ck buck suck c-u-ck
Explanation:
Answer:
3.75
Explanati
A sheet of glass having an index of refraction of 1.49 is to be coated with a film of material having an index of refraction of 1.62 in order that green light with a wavelength of 534 nm (in air) will be preferentially transmitted via constructive interference. (a) What is the minimum thickness of the film that will achieve the result
Answer:
the required minimum thickness is 179.19 nm
Explanation:
Given the data in the question;
Refraction index of air n₁ = 1
Refraction index of sheet n₂ = 1.49
Refraction index of film n₃ = 1.62
wavelength of green light λ = 534 nm
In the data given, n₂ > n₃
so, this case has no pie-phase shift,
the condition for constructive interference will be;
mλ = 2Ln₂
L = mλ / 2n₂
so we substitute
L = m(534) / 2( 1.49 )
L = m( 534/ 2.98 )
L = m( 179.19 nm )
so for minimum value of L,
let m = 1
such that, L[tex]_{min[/tex] will be;
L[tex]_{min[/tex] = 1 × ( 179.19 nm )
L[tex]_{min[/tex] = 179.19 nm
Therefore, the required minimum thickness is 179.19 nm
Mars orbits the Sun in 1.87 Earth years. How far is Mars from the Sun?
Answer:
151.12 million miles i actually just did this question on a test
Explanation:
Mars orbits—or completes one revolution—around the Sun every 686.98 Earth days, or once every 1.88 Earth years.
What is meant by one revolution?
The term "revolution" describes how an item moves in its orbit around another object. For instance, the 24-hour day is created as the Earth rotates on its own axis.
The 365-day year is made possible by the Sun's rotation of the Earth. A planet spins around a satellite.
While orbiting the Sun, Mars travels at an average speed of 53,979 miles per hour, which equates to 86,871 km per hour.
Thus, Mars orbits—or completes one revolution—around the Sun every 686.98 Earth days, or once every 1.88 Earth years.
To learn more about One revolution, refer to the below link:
https://brainly.com/question/26289977
# SPJ2
During which phase is the moon not visible?
A) Full Moon
B) First quarter
C) New moon
D) Waxing crescent
Answer:
they are right it is a new moon
Explanation:
took the test
TRUE OR FALSE
2 QUESTIONS
NEED HELP ASAP
THX :)
LOTS OF POINTS :>
Answer: Both False
Explanation:
Our Milky Way Galaxy is a spiral galaxy. Some spiral galaxies are what we call "barred spirals" because the central bulge looks elongated
Irregualuar glaxyices are all over the place
in winter soap does not dissolve properly in winter why
Answer:
In winter, the temperature of the water is very low which makes the soap dissolve in a very small amount. ... Since the water molecules move faster, they come in contact with soap more often causing it to dissolve faster
Hope it helps...
Have a great day : )
An object is accelerated by a net force in which direction?
A. at an angle to the force
B. in the direction of the force
C. in the direction opposite to the force
D. Any of these is possible.
Answer:
B. in the direction of the force
Explanation:
Sana nakatulong
write the definition
Heredity, Dominant allele, recessive allele, probability, genotype, phenotype
Explanation:
Heredity: The passing on of physical or mental characteristics genetically from one generation to another.
Dominant allele: In genetics, dominance is the phenomenon of one variant of a gene on a chromosome masking or overriding the effect of a different variant of the same gene on the other copy of the chromosome. The first variant is termed dominant and the second recessive.
Answer:
Heredity: the passing on of physical or mental characteristics genetically from one generation to another.
Dominant Allele: a variation of a gene that will produce a certain phenotype, even in the presence of other alleles.
Recessive Allele: a variety of genetic code that does not create a phenotype if a dominant allele is present.
Probablity: used to measure the chance or likelihood of an event to occur.
Genotype: an organism's complete set of genetic material
Phenotype: the set of observable characteristics of an individual resulting from the interaction of its genotype with the environment.
A 1500-kg car traveling due north with a speed of 25 m/s collides head-on with a 4500-kg truck traveling due south with a speed of 15 m/s. The two vehicles stick together after the collision. What is the total momentum of the system prior to the collision
Answer:
OMG IM ON THE SAME QUESTION
Explanation:
The density of gold is 19.3g/cm³.what is the value in kilograms per cubic meter?
What is one way that gas giants differ from the terrestrial planets?
A. The gas giants have hard surfaces.
B. The gas giants have massive atmospheres.
C. The gas giants are much smaller.
D. The gas giants are made of rocks and ice.
A box with a mass of 0.5 slugs lies on an inclined plane making an angle of 30o with the horizontal. If the coefficient of kinetic friction between the box and the plane is 0.4, what is the magnitude of the force that must be applied parallel to the incline to keep the box moving down the incline at a constant speed
Answer: 10.98 N
Explanation:
Given
mass of box is [tex]m=0.5\ slugs\approx 7.3\ kg[/tex]
The coefficient of kinetic friction is [tex]\mu= 0.4[/tex]
It is given that on the application of force box started moving with constant speed i.e. there is no net external force
[tex]\Rightarrow F+mg\sin 30^{\circ}=\mu mg\cos 30^{\circ}\\\Rightarrow F=mg(\mu \cos 30^{\circ}-\sin 30^{\circ})\\\Rightarrow F=7.3\times 9.8(0.866\times0 .4-0.5)=-10.98\ N\\[/tex]
The negative sign indicates direction of force is opposite i.e. it must be applied upwards
Select the correct answer.
Why are the requirements to become a congressional representative and a senator different?
A.
The framers didn’t want senators to worry about their constituents as often as representatives do.
B.
The framers gave senators more lawmaking powers and responsibilities than representatives.
C.
The framers wanted senators to be more mature and more experienced than representatives.
D.
The framers thought senators and representatives should have reasons to argue with each other.
The framers wanted senators to be more mature and more experienced than representatives. (C)
Answer:
C -> The framers wanted senators to be more mature and more experienced than representatives.
When magma cools quickly, what kind of texture or
crystals does a rock have?
a. Fine-grained or small crystals
b. a mixture of all types of grains or sizes of crystals
c. Medium-grained or medium crystals
d. Coarsc-grained or large crystals
Answer:
a
Explanation:
when magma cools Crystal's form because the solution is super saturated with respect to some minerals if the magma cools quickly the crystals do not have much time to form hence they are small and also the resulting rock is fine grained
A long, uninsulated steam line with a diameter of 100 mm and a surface emissivity of 0.8 transports steam at 150°C and is exposed to atmospheric air and large surroundings at an equivalent temperature of 20°C. (a) Calculate the rate of heat loss per unit length for a calm day. (b) Calculate the rate of heat loss on a breezy day when the wind speed is 8
Answer:
Heat loss per unit length = 642.358 W/m
The heat loss per unit length on a breezy day during 8 m/s speed is = 1760.205 W/m
Explanation:
From the information given:
Diameter D [tex]= 100 mm = 0.1 m[/tex]
Surface emissivity ε = 0.8
Temperature of steam [tex]T_s[/tex] = 150° C = 423K
Atmospheric air temperature [tex]T_{\infty} = 20^0 \ C = 293 \ K[/tex]
Velocity of wind V = 8 m/s
To calculate average film temperature:
[tex]T_f = \dfrac{T_s+T_{\infty}}{2}[/tex]
[tex]T_f = \dfrac{423+293}{2}[/tex]
[tex]T_f = \dfrac{716}{2}[/tex]
[tex]T_f = 358 \ K[/tex]
To calculate volume expansion coefficient
[tex]\beta= \dfrac{1}{T_f} \\ \\ \beta= \dfrac{1}{358} \\ \\ \beta= 2.79 \times 10^{-3} \ K^{-1}[/tex]
From the table of "Thermophysical properties of gases at atmospheric pressure" relating to 358 K of average film temperature; the following data are obtained;
Kinematic viscosity (v) = 21.7984 × 10⁻⁶ m²/s
Thermal conductivity k = 30.608 × 10⁻³ W/m.K
Thermal diffusivity ∝ = 31.244 × 10⁻⁶ m²/s
Prandtl no. Pr = 0.698
Rayleigh No. for the steam line is determined as follows:
[tex]Ra_{D} = \dfrac{g \times \beta (T_s-T_{\infty}) \times D_b^3}{\alpha\times v}[/tex]
[tex]Ra_{D} = \dfrac{9.8 \times (2.79 *10^{-3})(150-20) \times (0.1)^3}{(31.244\times 10^{-6}) \times (21.7984\times 10^{-6})}[/tex]
[tex]Ra_{D} = 5.224 \times 10^6[/tex]
The average Nusselt number is:
[tex]Nu_D = \Big \{ 0.60 + \dfrac{0.387(Ra_D)^{1/6}}{[ 1+ (0.559/Pr)^{9/16}]^{8/27}} \Big \}^2[/tex]
[tex]Nu_D = \Big \{ 0.60 + \dfrac{0.387(5.224\times 10^6)^{1/6}}{[ 1+ (0.559/0.698)^{9/16}]^{8/27}} \Big \}^2[/tex]
[tex]Nu_D = \Big \{ 0.60 + \dfrac{5.0977}{[ 1.8826]^{8/27}}\Big \}^2[/tex]
[tex]Nu_D = \Big \{ 0.60 + 4.226 \Big \}^2[/tex]
[tex]Nu_D = 23.29[/tex]
However, for the heat transfer coefficient; we have:
[tex]h_D = \dfrac{Nu_D\times k}{D_b} \\ \\ h_D = \dfrac{(23.29) \times (30.608 \times 10^{-3} )}{0.1}[/tex]
[tex]h_D = 7.129 \ Wm^2 .K[/tex]
Hence, Stefan-Boltzmann constant [tex]\sigma = 5.67 \times 10^{-8} \ W/m^2.K^4[/tex]
Now;
To determine the heat loss using the formula:
[tex]q'_b = q'_{ev} + q'_{rad} \\ \\ q'_b = h_D (\pi D_o) (T_t-T_{\infty})+\varepsilon(\pi D_b)\sigma (T_t^4-T_{\infty }^4)[/tex]
[tex]q'_b = (7.129)(\pi*0.1) (423-293) + (0.8) (\pi*0.1) (5.67 *10^{-8}) (423^4-293^4) \\ \\ q'_b = 291.153 + 351.205 \\ \\ \mathbf{q'_b = 642.258 \ W/m}[/tex]
Now; here we need to determine the Reynold no and the average Nusselt number:
[tex]Re_D = \dfrac{VD_b}{v } \\ \\ Re_D = \dfrac{8 *0.1}{21.7984 \times 10^{-6}} \\ \\ Re_D = 3.6699 \times 10^4[/tex]
However, to determine the avg. Nusselt no by using Churchill-Bernstein correlation, we have;
[tex]Nu_D = 0.3 + \dfrac{0.62 \times Re_D^{1/2}* Pr^{1/3}}{[1+(0.4/Pr)^{2/3}]^{1/4}} [1+ (\dfrac{Re_D}{282000})^{5/8}]^{4/5}[/tex]
[tex]Nu_D = 0.3 + \dfrac{0.62 \times (3.6699*10^4)^{1/2}* (0.698)^{1/3}}{[1+(0.4/0.698)^{2/3}]^{1/4}} [1+ (\dfrac{3.669*10^4}{282000})^{5/8}]^{4/5}[/tex]
[tex]Nu_D = (0.3 +\dfrac{105.359}{1.140}\times 1.218) \\ \\ Nu_D = 112.86[/tex]
SO, the heat transfer coefficient for forced convection is determined as follows afterward:
[tex]h_D = \dfrac{Nu_{D}* k}{D_b} \\ \ h_D = \dfrac{112.86*30.608 *10^{-3}}{0.1} \\ \\ h_D = 34.5 \ W/m^2 .K[/tex]
Finally; The heat loss per unit length on a breezy day during 8 m/s speed is:
[tex]q'b = h_D (\pi D_b) (T_s-T_{\infty}) + \varepsilon (\pi D_b) \sigma (T_s^4-T_ {\infty}^4) \\ \\ q'b = (34.5) (\pi *0.1) (423-293) + (0.8) (\pi*0.1) (5.67*10^{-8}) (423^4 - 293^4) \\ \\ = 1409 +351.205 \\ \\ \mathbf{q'b = 1760.205 \ W/m}[/tex]
A banana peel has lots of friction.
True or False
Answer:
False
Explanation:
I learned it the hard way trust me T^T
An astronaut has a mass of 75 kg and is floating in space 500 m from his 125,000 kg spacecraft. What will be the force of gravitational attraction between the two? Since there is no force opposing him, he will accelerate toward the ship. Find his acceleration.
Answer:
1. 2.5×10¯⁹ N
2. 3.33×10¯¹¹ m/s²
Explanation:
1. Determination of the force of attraction.
Mass of astronaut (M₁) = 75 Kg
Mass of spacecraft (M₂) = 125000 Kg
Distance apart (r) = 500 m
Gravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²
Force of attraction (F) =?
The force of attraction between the astronaut and his spacecraft can be obtained as follow:
F = GM₁M₂ /r²
F = 6.67×10¯¹¹ × 75 × 125000 / 500²
F = 2.5×10¯⁹ N
Thus, the force of attraction between the astronaut and his spacecraft is 2.5×10¯⁹ N
2. Determination of the acceleration of the astronaut.
Mass of astronaut (m) = 75 Kg
Force (F) = 2.5×10¯⁹ N
Acceleration (a) of astronaut =?
The acceleration of the astronaut can be obtained as follow:
F = ma
2.5×10¯⁹ N = 75 × a
Divide both side by 75
a = 2.5×10¯⁹ / 75
a = 3.33×10¯¹¹ m/s²
Thus, the acceleration the astronaut is 3.33×10¯¹¹ m/s²
Hello everyone I have a question for you today. So you know we have discovered black holes and have theorized about white holes so let me ask you without you going to the internet and looking it up what would happen if a white hole and a black hole collided?
Answer:
White hole is an impossible object in universe. ... This means that in a hypothetical universe where there is a black and a white hole, in a short time after their first interaction the white hole will become another black hole so that the system will end up with two black holes.