The concentration of the cyanide ion, CN-(aq) would be 0.440 mol/L (assuming the stoichiometry of the reaction).
What is the stoichiometry of the reaction between NaAu(CN)2(aq) and CN-(aq)?The stoichiometry of the reaction is 1:2, meaning that for every 1 mole of NaAu(CN)2(aq) consumed, 2 moles of CN-(aq) are produced.
If the technician finds that the amount concentration of NaAu(CN)2(aq) is 0.550 mol/L, what would be the concentration of gold ion, Au+(aq), assuming the stoichiometry of the reaction?Assuming the stoichiometry of the reaction, the concentration of Au+(aq) would be 0.550 mol/L.
Since NaAu(CN)2 dissociates to form one Au(CN)2- ion and two CN- ions, the concentration of CN- ions would be double the concentration of NaAu(CN)2. Therefore, the concentration of CN-(aq) would be 0.220 mol/L x 2 = 0.440 mol/L.
Learn more about cyanide ion here:
https://brainly.com/question/29643748
#SPJ1
Arrange the following amines in order of decreasing base strength. Rank from strongest to weakest base. To rank items as equivalent, overlap them. View Available Hint(s) NH3 (CH3)2NH CH3NH NH,Br Strongest base Weakest base The correct ranking cannot be determined. Submit Previous Answers Request Answer
The amines should be ranked in the following order, decreasing base strength Strongest base: NH3 (ammonia), (CH3)2NH (dimethylamine), and CH3NH (Methylamine) -NH,Br The weakest base.
What is the ranking of acidity?Results for "rate the acids in decreasing acid strength" as an image.
When Cl's oxidation state in its oxyacid increases, so will the acidity of the solution. The highest level of Cl oxidation is found in HClO4, which is followed by HClO3, HClO2, and HClO.
Which acid is the most potent and acidic?For instance, the pH of pure sulfuric acid is a staggering -12, while that of nitric acid is 1.08 and hydrochloric acid is at 1.6. As a result, sulfuric acid is the strongest "normal" acid you will come across.
To know more about amines visit:-
https://brainly.com/question/30868298
#SPJ1
write a balanced chemical equation, including physical state symbols, for the decomposition of solid mercury(ii) oxide (hgo) into liquid mercury and gaseous dioxygen.
The balanced chemical equation for the decomposition of solid Mercury (II) oxide (HgO) into liquid Mercury and gaseous Dioxygen is:
[tex]HgO (s) \rightarrow Hg (l) + O_2 (g)[/tex]
Mercury (II) oxide, HgO, is a stable compound that may be decomposed by heating it to generate mercury metal and oxygen gas.
This reaction may be classified as a thermic decomposition reaction because it is initiated by heat. The equation is balanced as there is one atom of mercury on the left-hand side and one on the right-hand side.
Similarly, there are two atoms of oxygen on the left-hand side and two on the right-hand side. The physical state of HgO is solid, whereas the physical state of Hg and [tex]O_2[/tex] is liquid and gaseous, respectively.
To learn more about balanced chemical equation refer - https://brainly.com/question/14228953
#SPJ11
Select an INCORRECT expression about a first-order reaction of A→2P. Note: k is rate constant, [A]0 is initial reactant concentration. A) Rate Law for this reaction: Rate=k[ A] B) For rates of concentration changes: −2Δ[A]/t=Δ[P]/t C) Reactant half-life (t1/2)=0.693/k D) For Product Concentration: [P]=[A]0−[A]0exp(−kt) A B C D
Option C is incorrect as it does not use the correct equation to calculate the half-life of a first-order reaction.
The correct answer is C. The reactant half-life of a first-order reaction is not equal to 0.693/k, as expressed in option C.
The equation for the half-life of a first-order reaction is: t1/2 = 0.693/k[A]0, where k is the rate constant and [A]0 is the initial reactant concentration.
To understand why this equation is correct, we need to understand how the half-life of a reaction is calculated. The half-life of a reaction is defined as the time taken for the concentration of a reactant to be halved.
This means that after a period of time, the concentration of the reactant will be equal to half of its initial concentration.
We can calculate this time using the equation for the reaction rate law: rate = k[A]0. By rearranging this equation and solving for t, we get t = 0.693/k[A]0.
This equation is known as the integrated rate law and is used to calculate the half-life of a first-order reaction.
Therefore, option C is incorrect as it does not use the correct equation to calculate the half-life of a first-order reaction. The correct options are A, B, and D.
Option A states that the rate law for this reaction is rate = k[A]0. Option B states that for rates of concentration changes, the equation is -2Δ[A]/t = Δ[P]/t,
where Δ[A] and Δ[P] are changes in the concentrations of the reactant and product, respectively.
Option D states that for product concentration, the equation is [P] = [A]0 - [A]0exp(-kt), which is correct.
to know more about half-life refer here:
https://brainly.com/question/24710827#
#SPJ11
Under what conditions of temperature and pressure do real gases behave most like ideal gases?
1) high temperature and high pressure
2) high temperature and low pressure
3) low temperature and high pressure
4) low temperature and low pressure
Real gases behave most like ideal gases under conditions of high temperature and low pressure. Option 2 is correct.
This is because at high temperatures, the kinetic energy of gas molecules increases, causing them to move faster and collide more frequently, which reduces the intermolecular forces between the gas molecules. At low pressures, the gas molecules are farther apart and the intermolecular forces are weaker, allowing the gas molecules to move more freely and behave more like an ideal gas.
At high pressures and low temperatures, the gas molecules are closer together and the intermolecular forces are stronger, causing deviations from ideal gas behavior. Hence the correct option is 2.
To know more about ideal gas, here
brainly.com/question/28257995
#SPJ4
benzil reacts with 1,2-diaminobenzene to give a compound with molecular formua c20h14n2. suggest a structure for this compound and write a reaction mechanism to show how it is formed.
The structure for this compound is a symmetrical diamide.
Mechanism of the reaction:Benzil (2,2-diphenylethane-1,2-dione) is a white or slightly yellowish crystalline powder.
Benzil reacts with 1,2-diaminobenzene to give a compound with a molecular formula of C20H14N2. A structure for this compound and a reaction mechanism for how it is formed are suggested.
Structure of the compound:The compound is a symmetrical diamide. The diamide is derived from the reaction of benzil and 1,2-diaminobenzene as a condensation reaction, which can be illustrated as follows:
Reaction mechanism:The reaction of benzil with 1,2-diaminobenzene forms the symmetrical diamide. Benzil is a highly reactive electrophile that reacts readily with nucleophiles.
The 1,2-diaminobenzene is a strong nucleophile that reacts readily with electrophiles. The reaction can be represented as a nucleophilic substitution reaction.
Benzil is first deprotonated by 1,2-diaminobenzene to form an anion. This intermediate has nucleophilic character and attacks the electrophilic benzil carbon atom.
The intermediate then eliminates a water molecule, resulting in the formation of the symmetrical diamide.Mechanism of the reaction:
Benzil (2,2-diphenylethane-1,2-dione) is a white or slightly yellowish crystalline powder. It is practically insoluble in water and is slightly soluble in alcohol and ether.
The 1,2-diaminobenzene is a highly reactive nucleophile that readily attacks electrophiles. It is a white or yellowish solid that is soluble in alcohol and ether.
Molecular formula of the compound:This compound has a molecular formula of C20H14N2.
to know more about diamide refer here:
https://brainly.com/question/30437242#
#SPJ11
A mixture of 50 mol % benzene and 50 mol % toluene is distilled under exactly the same conditions as in Part a. Using Figure 4. 3, determine the distillation temperature and the percentage composition of the first few drops of distillate
The distillation temperature would be > 80 degrees. The composition of the few drops of the distillate would be 40℅ benzene and 60℅.
The boiling point of a liquid is the temperature at which the vapor pressure of the liquid, a pure compound, or a combination equals 1 atm.
We are aware that pure benzene has a boiling point of 80 °C.
Pure toluene has a boiling point of 106 °C.
As benzene has a lower boiling point than toluene, it distills first. Thus, the distillation temperature is greater than 80 °C.
The mixture contains 40 percent benzene and 60 percent toluene by percentage.
Distillation is a process used to separate components of a mixture based on differences in their boiling points. The mixture is heated to vaporize the components, and then the vapor is condensed back into a liquid form. The condensed liquid contains a higher concentration of the more volatile components with lower boiling points.
Distillation is widely used in various industries, including chemical, pharmaceutical, and food production, to purify substances, extract desired components, or separate different chemical compounds. For example, it can be used to purify water, extract essential oils from plants, or separate crude oil into different fractions such as gasoline, diesel, and kerosene.
To learn more about Distillation visit here:
brainly.com/question/29037176
#SPJ4
a gas made up of n and o contains 30.4% n. at stp (0oc and 1 atm), 4.0 g of the gas occupies a volume of 0.974l. calculate the molecular formula. (think: when you have, p, v and t, what can you calculate?) also recall calculating empirical formula and molecular formula?)
The gas' empirical formula is NO2. The gas has the chemical composition N2O4.
How is a molecular formula composed?A molecular formula is the chemical representation of a molecular compound that lists the types and quantities of atoms that make up each molecule.
We must first find the empirical formula of the gas before using its molar mass to compute its molecular formula.
To calculate the empirical formula
We may infer that the gas has 69.6% oxygen (100% - 30.4%), since the gas includes 30.4% nitrogen. By assuming a 100 g sample of the gas, we may translate these percentages into mass ratios. This results in:
Nitrogen: 30.4 g
Oxygen: 69.6 g
The next step is to divide these masses by their corresponding atomic masses to obtain moles:
Nitrogen:30.4g/14.01g/mol=2.17 mol
Oxygen: 69.6 g / 16.00 g/mol = 4.35 mol
Nitrogen: 2.17 mol / 2.17 mol = 1.00
Oxygen: 4.35 mol / 2.17 mol = 2.00
Thus, NO2 is the gas' empirical formula.
The molar mass of the gas may be determined using the ideal gas law:
PV = nRT
n = PV/RT
n = (1 atm)(0.974 L)/(0.08206 L·atm/(mol·K))(273 K) = 0.0426 mol
Therefore, we have 0.0426 mol of the gas.
molar mass = 4.0 g/0.0426 mol = 93.9 g/mol
factor = molar mass of gas / molar mass of empirical formula
factor = 93.9 g/mol / 46.01 g/mol = 2.04 (rounded to two decimal places)
(NO2)2 → N2O4
N2O4 is the gas's molecular formula as a result.
To know more about empirical formula visit:-
https://brainly.com/question/11588623
#SPJ1
the allowable range for an objective function coefficient assumes that the original estimates for all the other coefficients are completely accurate so that this is the only one whose true value may differ from its original estimate. true or false?
True. The permissible range for an objective function coefficient represents the degree of uncertainty for the coefficient of interest and is based on the assumption that the initial estimations for all other coefficients in the linear programming model are correct..
The permissible range for an objective function coefficient is predicated on the assumption that all other coefficients in the linear programming model were initially estimated with the highest degree of accuracy. The objective function coefficient, whose true value may vary from its initial estimate, is the sole variable to which the permitted range is thus limited. This is so because linear programming models rely on a number of premises, one of which being that the model's coefficients are known for sure. The acceptable range denotes the range of values that the objective function coefficient can have without undermining the model's underlying assumptions in practise, where these coefficients may be derived using historical data or other sources.
learn more about coefficient here:
https://brainly.com/question/30066987
#SPJ4
An element has an electron configuration of [Ar]4s^2 3d^10 4p^5. Which of the following is/are TRUE about the element? Select ALL statements that are true about the element. a. The element is Se. b. The element is a halogen c. The element has one fewer electron than the following noble gas. d. When the element reacts with a metal, the elements tends to gain one electron to form an anion with a 1-charge.
An element with an electron configuration of [Ar]4s²3d¹⁰4p⁵ is Bromine(Br). The statements that are true about the element are B, C, and D.
A. The element is Bromine(Br). Bromine is a nonmetal and belongs to the family of elements called halogens, which is group 17. It is situated in period four of the periodic table. The electron configuration of Se is [Ar]4s²3d¹⁰4p⁵, which shows that it contains seven valence electrons.
Therefore, the statement "The element is Se" is incorrect.
B. Br is a halogen because it belongs to group 17, and all halogens possess a similar electron configuration, which is ns²np. Therefore, the element is a halogen and the statement is true.
C. Br has one less electron than the previous noble gas (Krypton) because Br has 35 electrons, whereas Kr has 36 electrons. So the statement "The element has one fewer electron than the following noble gas" is true.
D. The tendency of the element Br to gain one electron when it reacts with the metal to form a negatively charged ion is due to its valence electron configuration. Because Br contains seven valence electrons, it prefers to gain 1 electron and form an anion with a -1 charge. Therefore statement D is also true.
Overall, All the statements are TRUE except for statement A.
To know more about Bromine(Br), refer here:
https://brainly.com/question/29028678#
#SPJ11
What is/are the spectator ion(s) for the reaction of perchloric acid with sodium hydroxide? Select ALL of the spectator ions from the list below.a. Na+b. CO2c. O2d. Cl-
The spectator ions for the reaction of perchloric acid with sodium hydroxide are Na+ and Cl-.The spectator ions are those ions that are present on both sides of the chemical equation but do not participate in the reaction.
These ions do not change their oxidation state or form new compounds. Therefore, they are considered to be spectators and are excluded from the overall ionic equation. The equation for the reaction of perchloric acid with sodium hydroxide is:HClO4 + NaOH → NaClO4 + H2O. Sodium ions and chloride ions are the spectator ions in this reaction. Sodium ions (Na+) are present on both sides of the equation, and they do not participate in any chemical reaction.
They remain in the same oxidation state and do not form any new compound. Hence, Na+ ions are spectator ions in this reaction. Similarly, the chloride ions (Cl-) are also present on both sides of the equation and are not involved in any reaction. Therefore, they are also spectator ions.
In summary, the spectator ions for the reaction of perchloric acid with sodium hydroxide are Na+ and Cl-. These ions are present on both sides of the equation but do not participate in any chemical reaction. They are considered spectators and are excluded from the overall ionic equation.
Know more about oxidation state here:
https://brainly.com/question/17161178
#SPJ11
what part of an amino acid varies in size and structure, giving it unique properties?
The part of an amino acid that varies in size and structure, giving it unique properties is the side chain or R-group.
The part of an amino acid that varies in size and structure, giving it unique properties is the side chain or R-group. Amino acids are the building blocks of proteins. They are made up of a central carbon atom, an amino group (NH2), a carboxyl group (COOH), and a side chain or R-group.
The R-group can be different for each of the 20 amino acids, giving them their unique properties.The R-group can vary in size and structure, and it can be either acidic, basic, polar, or nonpolar. The properties of the R-group will determine the overall properties of the amino acid and the protein it is a part of.For example, glycine has a small R-group that is just a hydrogen atom, making it the smallest amino acid. The R-group of tryptophan is large and contains both polar and nonpolar regions, making it useful in anchoring proteins to cell membranes. Lysine has a basic R-group that is positively charged at physiological pH, allowing it to interact with negatively charged molecules in the body.
These are just a few examples of how the R-group can give each amino acid unique properties.
for such more question amino acid
https://brainly.com/question/14351754
#SPJ11
Please select the factors that influence the effectiveness of antimicrobial chemicals.
-Numbers and kinds of microbes present
-Concentration of the chemical
-Presence of organic matter
-temperature
The factors which influence the effectiveness of antimicrobial chemicals are: numbers and kinds of microbes present, concentration of the chemical, presence of organic matter, and temperature.
What factors affect antimicrobial chemicals?Factors that influence the effectiveness of antimicrobial chemicals are:
Numbers and kinds of microbes present: The type of microbe present can affect the effectiveness of the chemical used to eradicate it. For instance, Gram-negative bacteria is resistant to certain disinfectants.
Concentration of the chemical: The concentration of the chemical used is a significant factor affecting its effectiveness. An appropriate concentration is required for the chemical to kill the targeted microorganisms.
Presence of organic matter: Organic matter such as blood, soil, or feces can reduce the effectiveness of antimicrobial chemicals because they absorb or react with the disinfectant.
Temperature: The temperature at which the disinfectant is used may impact its efficacy. Certain chemicals work better at specific temperatures, and heat improves their efficacy by increasing the chemical reaction's rate.
Learn more about Antimicrobial chemicals here:
https://brainly.com/question/9227526
#SPJ11
Find the pH at four points and sketch the titration curve for the titration of 20.0 mL of 0.200 M hypobromous acid, HBrO, with 0.140 M potassium hydroxide, KOH. K, = 2.5x10-9 In order to receive points you must show your work in detail and label each part of the titration curve with a definition of the significance of that particular.
The curve will have the points (0, 8.04), (halfway, 8.04), (equivalence point, 8.04), and (endpoint, 14). The points can then be connected to create a graph of the pH over the course of the titration.
At the start of the titration, before any KOH has been added, the concentration of HBrO is 0.200 M and the concentration of KOH is 0.000 M, so the pH can be calculated as:
pH = 8.04 + log ([0.000]/[0.200]) = 8.04 + log (0) = 8.04.
When the equivalence point is reached, the concentrations of the two reactants are equal, so the pH can be calculated as:
pH = 8.04 + log ([0.200]/[0.200]) = 8.04 + log (1) = 8.04.
At the end of the titration, when all of the KOH has been added, the concentration of KOH is 0.140 M and the concentration of HBrO is 0.000 M, so the pH can be calculated as:
pH = 14 + log ([0.140]/[0.000]) = 14 + log (infinity) = 14.
Using these four points, a titration curve can be drawn to represent the pH of the solution throughout the titration. The curve will have the points (0, 8.04), (halfway, 8.04), (equivalence point, 8.04), and (endpoint, 14). The points can then be connected to create a graph of the pH over the course of the titration.
Learn more about pH: brainly.com/question/172153
#SPJ11
The electrons donated to the electron transport chain by NADH activate _____ proton pumps, while those donated by FADH2 activate ______ proton pumps.
The electrons donated to the electron transport chain by NADH activate 4 proton pumps, while those donated by FADH2 activate 2 proton pumps. Electron transport is the process by which electrons are passed from one molecule, such as NADH or FADH2, to another molecule, such as oxygen.
The electrons donated to the electron transport chain by NADH activate 10 proton pumps, while those donated by FADH2 activate 6 proton pumps.
What is the electron transport chain?
The electron transport chain (ETC) is a chain of molecules that move electrons down a gradient from a higher energy state to a lower energy state, releasing energy along the way. In eukaryotic cells, the electron transport chain is located in the inner mitochondrial membrane. Electrons from NADH and FADH2 are passed down the chain in the electron transport chain, which eventually generates a proton gradient used to create ATP. In the electron transport chain, NADH and FADH2 donate electrons to a chain of electron carriers, which then pump protons from the mitochondrial matrix to the intermembrane space. The number of proton pumps activated by electrons donated by NADH and FADH2 differ. Electrons donated by NADH activate ten proton pumps, while electrons donated by FADH2 activate six proton pumps. The electron transport chain is responsible for the generation of the proton motive force used by ATP synthase to create ATP, which is the main source of energy for the cell.
To know more about electron transport chain, click the below link:
https://brainly.com/question/24372542
#SPJ11
125 cm cube of 0.100 mol/ dm cube of copper (II) sulfate solution is required to react completely with a solution containing 25 cm cube of sodium hydroxide. Calculate the concentration of sodium hydroxide in mol/ dm cube
Answer:
Explanation:
The balanced chemical equation for the reaction between copper (II) sulfate and sodium hydroxide is:
CuSO4 + 2NaOH → Cu(OH)2 + Na2SO4
We can use the mole ratio of CuSO4 to NaOH to find the number of moles of NaOH required to react with 0.100 moles/dm3 of CuSO4:
1 mole CuSO4 reacts with 2 moles NaOH
0.100 moles/dm3 CuSO4 will react with 0.200 moles/dm3 NaOH
Now we can use the volume and number of moles of NaOH to calculate its concentration:
25 cm3 = 0.025 dm3
Concentration of NaOH = number of moles / volume
Concentration of NaOH = 0.200 moles/dm3 / 0.025 dm3
Concentration of NaOH = 8.00 mol/dm3
Therefore, the concentration of sodium hydroxide in the solution is 8.00 mol/dm3.
Researchers separated fatty acid sodium salts from glycerol by adding HCl and then extracting with hexanes. Which statement correctly describes the extraction process?
A.HCl protonates the carboxylate, and the fatty acid is found in the aqueous layer.
B.The carboxyl group is deprotonated, and the fatty acid is dissolved in the polar solvent.
C.HCl protonates the carboxylate, and the fatty acid is found in the organic layer.
D.The carboxyl group is deprotonated, and the fatty acid is dissolved in the nonpolar solvent
The statement which describes the extraction process correctly is "HCl protonates the carboxylate, and the fatty acid is found in the organic layer." This lead to free acid formation. Thus, the correct option is C.
What is extraction of hexane?Researchers separated fatty acid sodium salts from glycerol by adding HCl and then extracting with hexanes. This is an acid-base extraction, which involves separating compounds based on their solubility differences. The extraction process can be explained as follows: When HCl is added to the mixture, it reacts with the fatty acid sodium salt to produce the corresponding fatty acid and sodium chloride.
The carboxylate group in the fatty acid sodium salt is protonated by HCl, making it more polar and water-soluble. As a result, the fatty acid is converted to its free acid form, which is insoluble in water but soluble in organic solvents like hexanes. Therefore, the fatty acid will move into the organic layer and can be extracted with hexanes. Thus, the correct statement that describes the extraction process is "HCl protonates the carboxylate, and the fatty acid is found in the organic layer."
Therefore, the correct option is C.
Learn more about Extraction process here:
https://brainly.com/question/28297691
#SPJ11
where and when in which state is gold found in nature
notable states in the United States where gold is found include California, Alaska, Colorado, Nevada, and South Dakota.
when:(gold rushes)
California (1848-1855)
Colorado (1858-1861)
Alaska (1896-1899)
South Dakota (1874-1877)
Georgia (1828-1849)
Montana (1862-1864)
Nevada (1859-1864)
Oregon (1851-1861)
North Carolina (1799-1848)
What is the total volume of gaseous products formed when 119 liters of carbon monoxide react completely according to the following reaction? (All gases are at the same temperature and pressure.) carbon monoxide (g) + water(l>carbon dioxide (g) + hydrogen(g) _________ liters products
To find the volume of gaseous products formed in the given reaction, we have to balance the chemical equation and then use the balanced chemical equation to solve the question.
The balanced chemical equation of the given reaction is as follows:
CO (g) + H2O (l) → CO2 (g) + H2 (g)
Now, we need to determine the mole ratios of reactants and products:
1 mole of CO reacts with 1 mole of H2O to produce 1 mole of CO2 and 1 mole of H2.
As given, we have 119 liters of CO, we need to calculate the amount of H2O required to react with 119 liters of CO:
1 mole of CO occupies 22.4 L at STP.
Therefore, 119 L of CO contains 119/22.4 = 5.31 moles of CO.
From the balanced chemical equation, we can see that 1 mole of CO reacts with 1 mole of H2O.
Therefore, 5.31 moles of CO will react with 5.31 moles of H2O.
So, the volume of H2O required to react with 119 L of CO can be calculated as follows:
5.31 moles of H2O occupy 5.31 × 18 L = 95.58 L
Now, we have the volume of H2O required to react with 119 L of CO.
We know that, at the same temperature and pressure, the volume of the gaseous product is directly proportional to the number of moles of the gaseous product.
So, the volume of gaseous products formed in the given reaction can be calculated as follows:
1 mole of CO2 occupies 22.4 L at STP.
Therefore, 5.31 moles of CO2 will occupy 5.31 × 22.4 L = 119.2 L
1 mole of H2 occupies 22.4 L at STP.
Therefore, 5.31 moles of H2 will occupy 5.31 × 22.4 L = 119.2 L
Therefore, the total volume of gaseous products formed in the given reaction is 119.2 L. Answer: 119.2
to know more about chemical balance refer here:
https://brainly.com/question/28294176#
#SPJ11
determine the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) o2 (g) --> co2 (g) the change in enthalpy for this reaction is -349 kj/mol.
The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol. This enthalpy change is referred to as the heat of reaction, or enthalpy of reaction, and can be calculated using the enthalpy of formation of each reactant and product in the reaction.
The enthalpy of formation for carbon is given as +716 kJ/mol and for oxygen it is given as 0 kJ/mol. The enthalpy of formation for CO2 is given as -393.5 kJ/mol. Using Hess’s law, we can calculate the enthalpy of reaction using the following equation: ΔHreaction = (ΔHformation CO2) - (ΔHformation C + ΔHformation O2)
Using the values for the enthalpies of formation for the reactants and products, the enthalpy of reaction can be calculated as follows: ΔHreaction = (-393.5) - (716 + 0) = -349 kJ/mol.This is the same enthalpy change as given in the question.
In conclusion, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol.
Know more about enthalpy change here:
https://brainly.com/question/29556033
#SPJ11
determine the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) o2 (g) --> co2 (g) the change in enthalpy for this reaction is -349 kj/mol.
The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the equation C(s) + O2(g) → CO2(g) is -540.6 kJ.
From the equation, the mole ratio of carbon to carbon dioxide is 1:1. Therefore, the number of moles of carbon reacted can be determined as follows:
Mass of carbon = 18.6 g
Molar mass of carbon = 12.01 g/mol
Number of moles of carbon = (18.6 g)/(12.01 g/mol) = 1.549 moles
Since the change in enthalpy for the reaction is given as -349 kJ/mol, we can calculate the enthalpy change for the given mass of carbon as follows: Enthalpy change = Number of moles of carbon × Change in enthalpy. Enthalpy change = 1.549 moles × (-349 kJ/mol).Enthalpy change = -540.6 kJ (rounded off to two significant figures)Therefore, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the given equation is -540.6 kJ.
More on enthalpy change: https://brainly.com/question/17056641
#SPJ11
If 20 moles of fuel are combusted in C4H8 + 6 O2 -> 4 CO2 + 4 H2O, how many moles of O2 are consumed?
If moles of fuel (butene) are combusted in air, the number of moles of oxygen gas produced is 120 moles.
How to calculate moles using stoichiometry?Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).
According to this question, 1 mole of butene reacts with 6 moles of oxygen gas to produce 4 moles of carbondioxide and 4 moles of water.
Based on the reaction, 1 mole of fuel reacts with 6 moles of oxygen gas.
This means that 20 moles of fuel will react with 120 moles of oxygen gas.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
True or False , cations are smaller and anions larger than their parent atoms. ionic radius increases down a group. across a period, ionic radii generally decrease, but a large increase occurs from the last cation to the first anion.
Cations are smaller and anions larger than their parent atoms. ionic radius increases down a group. across a period, ionic radii generally decrease, but a large increase occurs from the last cation to the first anion.Therefore, the given statement is true.
True. Cations are smaller than their parent atoms because they have fewer electrons and therefore a smaller electron cloud. Anions are larger than their parent atoms because they have more electrons and therefore a larger electron cloud.
Ionic radius increases down a group because the additional electron is added to a larger atomic radius. Across a period, ionic radii generally decrease due to the increased nuclear charge and electrons being pulled in closer to the nucleus. However, a large increase occurs from the last cation to the first anion because the added electron is going into an empty orbital, thus increasing the size of the ion.
for such more question on cation
https://brainly.com/question/14309645
#SPJ11
What happens to the atomic number of an element when γ-radiation, is emitted?it deacrease by 1it increase by 1it decrease by 2it remains the same
The last solution is the correct answer to this question. The atomic number of an element remains the same when γ-radiation is emitted.
Gamma radiation (γ-radiation) is a form of electromagnetic radiation that does not carry any charge or atomic mass. Therefore, it does not directly affect the atomic number (Z) or mass number (A) of an atom.
The atomic number of an element represents the number of protons in the nucleus of an atom. When a radioactive decay occurs, the nucleus of the atom changes, which may result in a change in the number of protons. However, γ-radiation is not a type of radioactive decay that results in a change in the number of protons or atomic number of an element.
Learn more about Gamma radiation here brainly.com/question/9815840
#SPJ4
What is the percentage by mass of hydrogen in glucose, C6H12O6?
Glucose has a molecular weight of 180.18 g/mol, while hydrogen has an atomic weight of 1.008 g/mol. As a result, glucose has a mass-based hydrogen content of around 7.48%.
With the molecular formula C6H12O6, or six carbon atoms, twelve hydrogen atoms, and six oxygen atoms, glucose is a simple sugar. The atomic weights of glucose's component atoms may be added to determine its molecular weight, which is 180.18 g/mol. We must ascertain the mass of the hydrogen atoms contained in one mole of glucose in order to calculate the proportion of hydrogen by mass in glucose. Twelve hydrogen atoms have a mass of 12.096 g/mol because their atomic weight is 1.008 g/mol. Hence, based on mass, glucose has a hydrogen concentration of approximately 7.48% (12.096/180.18 x 100%).
learn more about hydrogen here:
https://brainly.com/question/28937951
#SPJ4
For the following reaction mechanism, what is the catalyst? A) O(g) B) O₂(g) C) O.(g) D) NO(g) E) NO2(g) O3(g) → O2(g) + O(g) NO(g) + O3(g) → NO2(g) + O₂(g) O(g) + NO2(g) → O2(g) + NO(g)
The catalyst in the given reaction mechanism is O.(g) (atomic oxygen).
O3(g) → O2(g) + O(g) NO(g) + O3(g) → NO2(g) + O₂(g) O(g) + NO2(g) → O2(g) + NO(g). The correct answer is option: C .
The reaction mechanism involves the formation and consumption of O atoms at various steps. Ozone (O3) decomposes to produce O2 and O atoms. These O atoms then react with NO2 to form NO and O2, which are further involved in the formation of O3. Therefore, the O atoms produced from the decomposition reaction of O3 act as a catalyst in this reaction mechanism. The correct answer is option: C.
To know more about decomposition reaction, here
brainly.com/question/8009068
#SPJ4
The concentration of barium ion, Ba2+, in solution is 0.010 M.a) What concentration of sulfate ion, SO42–, is required to begin precipitation of BaSO4?b) When enough SO42– has been added so that the concentration of sulfate ion in solution reaches 0.015 M, what concentration of Ba2+ will remain in solution?
The balanced chemical equation for precipitation of [tex]BaSO4[/tex] is:
[tex]Ba2+ (aq) + SO42- (aq) → BaSO4 (s)[/tex]. The concentration of Ba2+ remaining in solution is 7.3 × 10^-9 M.
a) To begin precipitation of BaSO4, the ion product of Ba2+ and SO42- must reach the solubility product constant, Ksp, for BaSO4. The Ksp for BaSO4 is[tex]1.1 * 10^{-10}[/tex]. [tex]Ksp = [Ba2+][SO42-][/tex] , [tex]1.1 * 10^{-10} = (0.010 M)(x M)[/tex],[tex]x = 1.1 * 10^{-8} M[/tex]. Therefore, concentration of sulfate ion required to begin precipitation of BaSO4 is [tex]1.1 * 10^{-8} M[/tex].
b) Once concentration of SO42- in solution reaches 0.015 M, the ion product of Ba2+ and SO42- will exceed the Ksp for BaSO4, and precipitation will occur until equilibrium is established. [tex][Ba2+][SO42-][/tex] = (0.010 M)(1.1 × 10^-8 M) = 1.1 × 10^-10.
Let x be the concentration of Ba2+ that remains in solution after precipitation: [tex]Ksp = [Ba2+][SO42-][/tex] ,[tex]1.1 * 10^{-10} = (x M)(0.015 M),[/tex] [tex]x = 7.3 * 10^{-9 }M.[/tex]
To know more about precipitation, here
brainly.com/question/18109776
#SPJ4
What is the approximate percent by mass of oxygen in SO3? 1). 2). 3). 4).
The approximate percent by mass of oxygen in SO3 is 19.98 % which is calculated by using the percent composition formula.
The sulfur trioxide is defined as the chemical compound with molecular formula or chemical formula SO3. In every sample of substance there will be the same number of sulfur atoms and oxygen atoms present in the substance.
The percent composition can be calculated by dividing the mass of the atom by the total mass of the compound or the molecular weight multiplied by 100.
It can be calculated as, C% =MA / MT×100
We know that the atomic weight of Sulphur is 32.059 g/mole and the atomic weight of oxygen is 16.0.
The total mass becomes, 32.059 + 3×16=80.059
.C% = 16.00 / 80.059 ×100
⇒C% =19.98 %
To learn more about percent composition
https://brainly.com/question/28357357
#SPJ4
The correct question is,
What is the approximate percent by mass of oxygen in SO3?
Match the following definitions to the most appropriate term: - a substance that donates one proton when dissolved in water [ Choose] - a substance that donates two protons when dissolved in water [ Choose ]- a substance that donates three protons when dissolved in water [Choose] - any ionic compound whose cation comes from a base and whose anion comes from an acid [Choose] - the solution in the buret [Choose] - the solution in the flask [Choose] [Choiose]:a. analyte b. diprotic acid c. salt d. triprotic acid e. monoprotic acid f. titrant
The correct matching is
a substance that donates one proton when dissolved in water - e. monoprotic acid
a substance that donates two protons when dissolved in water - b. diprotic acid
a substance that donates three protons when dissolved in water - d. triprotic acid
any ionic compound whose cation comes from a base and whose anion comes from an acid - c. salt
the solution in the buret - f. titrant
the solution in the flask - a. analyte
The term "monoprotic acid" is most appropriate for a substance that donates one proton when dissolved in water. A "diprotic acid" is a substance that donates two protons when dissolved in water. A "triprotic acid" is a substance that donates three protons when dissolved in water. Any ionic compound whose cation comes from a base and whose anion comes from an acid is called a "salt." The solution in the buret is called a "titrant." Finally, the solution in the flask is called an "analyte.
For more such questions on acid, click on:
https://brainly.com/question/25148363
#SPJ11
What change did you observe in the hot water when you poured it in the mixing bowl?
Answer: You should add a picture but just put that the mixing bowl will get water vapor around the bowl
Explanation: the mixing bowl will get water vapor around the bowl
Give the electron geometry (eg), molecular geometry (mg), and hybridization for NH 3. a. eg = tetrahedral, mg = trigonal pyramidal, sp3 b. eg = trigonal pyramidal, mg = trigonal pyramidal, sp3 c. eg - trigonal planar, mg = trigonal planar, sp2 d. eg - trigonal pyramidal, mg - tetrahedral, sp3 e. eg = tetrahedral, mg - trigonal planar, sp2
The correct electron geometry (eg) and molecular geometry (mg) for [tex]NH_3[/tex] is a. eg = tetrahedral, mg = trigonal pyramidal, [tex]sp^3[/tex].
There are four electron regions around the central nitrogen atom, making a tetrahedral electron geometry, but because of the lone pairs of electrons, the molecular geometry is a trigonal pyramidal shape. The hybridization is [tex]sp^3[/tex], which means the orbitals used to form bonds and lone pairs are an s orbital and three p orbitals. Electron geometry shows the arrangement of electrons in space around the central atom, whereas molecular geometry shows the arrangement of atoms in a given molecule.Therefore,[tex]NH_3[/tex] have tetrahedral electron geometry, trigonal pyramidal molecular geometry and sp^3 hybridization.Learn more about electron geometry: https://brainly.com/question/7283835
#SPJ11