If a compound is being consumed in a reaction, the rate constant for that compound is _______.

Answers

Answer 1

The rate of a reaction depends upon the concentration of the reactants. If a compound is being consumed in a reaction, the rate constant for that compound decreases.

What is rate constant?

The rate constant or specific reaction rate of the reaction at a given temperature is defined as the rate of the reaction when the molar concentration of each of the reactants is unity.

The reaction rate is directly related to rate constant. The rate of a reaction decreases as the concentration of the reactants decreases with time. Here since the reactants are consumed, then the rate constant decreases.

Thus If a compound is being consumed, rate constant decreases.

To know more about rate constant, visit;

https://brainly.com/question/24658842

#SPJ1


Related Questions

For each of the following compounds, predict the energy barrier to rotation (looking down any one of the C—C bonds). Draw a Newman projection and then compare the staggered and eclipsed conformations. Remember that we assigned 4 kJ/mol to each pair of eclipsing H’s and 6 kJ/mol to an H eclipsing a methyl group:
(a) 2,2-Dimethylpropane
(b) 2-Methylpropane

Answers

(a) The steric hindrance brought on by the large methyl groups in 2,2-dimethylpropane results in a rather high energy barrier to rotation.

The lowest amount of energy necessary for a chemical reaction to take place is referred to as the energy barrier, also known as the activation energy. It is the amount of energy needed for the reactants to reach the transition state or the reaction's maximum energy location. The size of the energy barrier controls how quickly a reaction happens; a higher barrier causes a slower rate of reaction. Catalysts are frequently utilised to offer an alternate pathway that takes less energy to move forward in order to lower the energy barrier. Grasp chemical kinetics and creating chemical reactions with appropriate reaction rates require an understanding of the energy barrier concept.

Learn more about  energy barrier here:

https://brainly.com/question/18880410

#SPJ4

according to this equation, how many moles of ammonia (nh3) were used if 12.2 moles of ammonium sulfate (nh4)2so4 were made?

Answers

If 12.2 moles of (NH₄)₂SO₄ were produced, then 6.1 moles of NH₃ were used.

Assuming the balanced chemical equation is:

2 NH₃ + H₂SO₄ → (NH₄)₂SO₄

This equation shows that two moles of ammonia are required for every one mole of ammonium sulfate produced. Therefore, to find the number of moles of ammonia used, we can use the following calculation:

moles of NH₃= moles of (NH₄)₂SO₄ / 2

moles of NH₃ = 12.2 moles / 2

moles of NH₃ = 6.1 moles

Therefore, if the balanced chemical equation is 2 NH₃ + H₂SO₄ → (NH₄)₂SO₄ and 12.2 moles of (NH₄)₂SO₄ were produced, then 6.1 moles of NH₃ were used.

To know more about the ammonium sulfate, here

brainly.com/question/10834028

#SPJ4

A liquid has a PH of1 what type of liquid is it?​

Answers

Answer:

A liquid with a pH of 1 is a very acidic liquid. It has a high concentration of hydrogen ions (H+) and a low concentration of hydroxide ions (OH-). Examples of such liquids include hydrochloric acid (HCl) and battery acid. It is important to handle such liquids with caution as they can be corrosive and harmful to human health.

iron(III) chromate lithlumn nitrate
iron(III) nitrate + lithium chromate

Answers

The reaction you have written is a chemical equation for a precipitation reaction between iron(III) nitrate and lithium chromate, which results in the formation of iron(III) chromate and lithium nitrate. Precipitation reactions occur when two solutions are mixed and a solid product is formed, which typically settles at the bottom of the container. The equation is balanced, meaning that the number of atoms of each element is equal on both sides of the arrow. This is an important aspect of chemical reactions, as the law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction.

A compound, C6H14, produces a 1H NMR spectrum with four dustinct signals. The steps made by the integral trace measure 21, 42, 28 and 7 mm. Complete the table below to show the number of protons associated with each signal. Integral Protons21 mm, 42 mm, 28 mm, 7 mm

Answers

Integral: Protons:

21 mm 1 proton

42 mm 2 protons

28 mm 2 protons

7 mm 3 protons

To determine the number of protons associated with each signal, we need to look at the relative areas under each peak in the NMR spectrum, which are represented by the integral trace. The integral trace values of 21, 42, 28, and 7 mm represent the relative areas under each of the four distinct signals in the NMR spectrum.

The general rule is that the area under a peak in an NMR spectrum is proportional to the number of protons giving rise to that signal. Therefore, we can assign the number of protons associated with each signal by comparing the relative sizes of the integrals.

In this case, the largest integral corresponds to the signal with 2 protons (42 mm), so we can assign 2 protons to that signal. We can then assign the number of protons associated with the other signals by using the ratio of the integrals. For example, the integral of 21 mm is roughly half the size of the 42 mm integral, so we can assign 1 proton to the signal with an integral of 21 mm.

Using this method, we can assign the number of protons associated with each signal as shown in the table above.

Learn more about proton signal here: https://brainly.com/question/29769211

#SPJ1

Each arrow shows an electron moving from one energy level to another. Which transitions will release energy?
A and D
only A
only C
B dan C

Answers

The Transition state  A and D will release energy.

When an electron moves from a higher energy level to a lower energy level, it releases energy. This can be seen in the diagram as the arrows pointing downwards. Therefore, transitions A and D will release energy, while transitions B and C will not.

It is important to remember that energy is always conserved, so when an electron moves from one energy level to another, the energy is not lost, but rather transferred in the form of light or heat.

In summary, the transitions that will release energy are A and D, as they involve an electron moving from a higher energy level to a lower energy level.

To know more about Transition click on below link:

https://brainly.com/question/20750330#

#SPJ11

A designated driver is one who, in a group of two or more people that will be drinking, agrees to drink only one or two alcoholic beverages and then drive the others home safely.
True or False?

Answers

The given statement is false.

What is alcoholic beverages ?

Any fermented beverage that contains the intoxicating ingredient ethanol (CH3CH2OH), such as wine, beer, or distilled spirits, is considered to be an alcoholic beverage. The discussion on alcoholic beverages is brief.

What is drive ?

Driving refers to controlling or riding in a motor vehicle. Drive a go-kart, a bus, or a car. Drive is one of those multipurpose words with several applications. In a broad sense, it has to do with pushing or pushing in a certain direction; drive and go go hand in hand.

Therefore, given statement is false.

Learn more about alcoholic beverages from the given link.

https://brainly.com/question/29791214

#SPJ1

Which of the following salts would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a liter of water?
Select one:
a. Ba³(PO⁴)²K³p =1.3 x 10–²⁹
b. Pb³(PO⁴)² K³p= 3.0 x 10–⁴⁴
c. Ca³(PO⁴)² K³p = 1.0 x 10–²⁵
d. Sr³ (PO⁴)² K³p = 1.0 x10—³¹

Answers

The salt that would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a litre of water is the one with the highest Kₛp value. i.e. option B

The Kₛp value indicates the solubility product constant, which is a measure of the solubility of a salt in water.

The higher the Kₛp value, the more soluble the salt is in water, and therefore the higher the concentration of ions in solution.

Out of the given options, the salt with the highest Kₛp value is Pb³(PO⁴)² with a Kₛp value of 3.0 x 10–⁴⁴.

Therefore, this salt would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a litre of water.

Therefore the correct option is (b.) Pb³(PO⁴)² K³p= 3.0 x 10–⁴⁴

To know more about Kₛp values, refer here:

https://brainly.com/question/12961072#

#SPJ11

Based on the data table, one scientist concludes that the mass of PbCr04
formed depends only on the amount of K₂CrO4 added, and another scientist
concludes that the mass of PbCrO4 formed depends on the amount of the
limiting reactant. How might this conflict be resolved?
Sample IM HCI
(mL)
50
50
25
1
2
3
2M AgNO3
(ml)
50
25
50
AgCl
formed (g)
7.2
7.2
3.6
OA. Experiment further, using different amounts of each reactant as
the limiting reactant.
B. Write the balanced chemical equation for this reaction and
compare proportions resulting from the equation.
OC. Assume the same reactant is limiting in each trial.
O D. Determine how each scientist's background affects the
conclusions.
as anderes

Answers

The yield of a reaction depends on the limiting reactant of the reaction. Hence, write the balanced chemical equation for this reaction and compare proportions resulting from the equation.

What is limiting reactant ?

A limiting reactant in a reaction is the reactant which is fewer in amount or consume early without complete reaction with other reactants. Hence, as soon as this reactant is consume, the reaction stops.

For the given reaction, we must write the balanced reaction for the formation of the product lead chromate.  By writing the equation, we can understand the correct stoichiometry of each reactants and products.

The reactant which is taken in lower quantity than what is required for complete reaction with the reagents will determine the  reaction yield and the amount of product formed.

Find more on limiting reactants:

brainly.com/question/14225536

#SPJ1

Which of the following contains the MOST atoms? You shouldn't need to do a calculation here.
O 10.0 g Mg
O 10.0 g Ne
O 10.0 g Kr
O 10.0 g Ar
O 10.0 g He

Answers

The substance with the most atoms is He (10.0 g), since it has the lowest molar mass (4.00 g/mol).

What is Atom?

An atom is the basic unit of matter that is composed of three types of subatomic particles: protons, neutrons, and electrons. Atoms are incredibly small and are the building blocks of all matter in the universe.

The nucleus of an atom is made up of positively charged protons and neutral neutrons. The number of protons in an atom's nucleus determines its atomic number, which defines its unique chemical identity. The electrons, which are negatively charged, orbit the nucleus in shells and interact with other atoms to form chemical bonds.

The number of atoms in a substance is determined by its molar mass, which is the mass of one mole of the substance in grams. One mole of any substance contains Avogadro's number of atoms, which is approximately 6.022 x 10^23.

The molar masses of the given substances are:

Mg: 24.31 g/mol

Ne: 20.18 g/mol

Kr: 83.80 g/mol

Ar: 39.95 g/mol

He: 4.00 g/mol

Since the amount of each substance is the same (10.0 g), we can compare the number of atoms by comparing their molar masses. The substance with the lowest molar mass will contain the most atoms, since the same mass of that substance corresponds to a greater number of moles.

Therefore, the substance with the most atoms is He (10.0 g), since it has the lowest molar mass (4.00 g/mol).

Learn more about Atom from given link

https://brainly.com/question/17545314

#SPJ4

Which of these would be considered a basic nucleophile for reaction with an epoxide? (Select all that apply) O HBr O H20, H2SO4 O LiAlH4 O RMgBr O HCN D O CH3ONa, CH3OH O NaOH, H20O HCI O CH3OH, H2SO4 O KCN, DMF O CH3CC- (alkynyl anion)

Answers

The following nucleophiles would be considered basic for reaction with an epoxide: NaOH, H2O, CH3ONa, CH3OH, LiAlH4, RMgBr and CH3CC- (alkynyl anion).

Which are more reactive- acidic or basic nucleophiles?

Basic nucleophiles are typically more reactive towards epoxides than acidic nucleophiles due to their electron-rich nature, which allows them to attack the highly electrophilic carbon centre of the epoxide ring. Acidic nucleophiles are species that can donate electrons to form a new bond with an electron-deficient center, such as a carbocation or an electrophilic carbon atom.

What do these basic nucleophiles do?

These nucleophiles can attack the carbon centre of the epoxide and open the ring to form a new alkoxide or alkyne product, depending on the specific conditions and reagents used.

To learn more about nucleophiles, visit here:

https://brainly.com/question/28325919

#SPJ1

Three aqueous solutions of different volumes are prepared. One is 3 m in glucose, one is 3 m in fructose, and one is 3 m in ethanol (C2H5 OH). Which of the following must these solutions have in common? Select all that apply: They all have the same density They contain the same total number of moles of solute They contain the same mass of solute. They have the same boiling points.

Answers

The three solutions with different volumes, all being 3M in glucose, fructose, and ethanol must contain the same total number of moles of solute.

This is because the concentration of each solution is the same, and the number of moles of a substance is directly proportional to its concentration and volume. Therefore, if the concentration is the same for each solution, the total number of moles of solute must also be the same. However, the solutions may not necessarily have the same density, mass of solute, or boiling points. The density of a solution is affected by factors such as temperature and pressure, and the mass of solute depends on the molar mass of each solute. The boiling point of a solution is influenced by the concentration and identity of the solutes, as well as external factors such as pressure.

Learn more about solute :

https://brainly.com/question/7932885

#SPJ4

order the following steps of the chymotrypsin mechanism. not all steps may be given. top label: deprotonation of ser by hisdeprotonation of ser by his

Answers

I assume that the prompt got cut off. Based on the given information, the correct order of the steps of the chymotrypsin mechanism is:

Deprotonation of Serine (Ser) by Histidine (His).Attack of the peptide bond by the deprotonated Serine hydroxyl group.Formation of a tetrahedral intermediate.Collapse of the tetrahedral intermediate and cleavage of the peptide bond.Release of the first product and formation of an acyl-enzyme intermediate.

Note: The prompt seems to be asking for two labels, but only one label is given. Therefore, I provided the answer assuming that the label provided refers to the first step of the chymotrypsin mechanism.

For more questions like Chymotrypsin mechanism visit the link below:

https://brainly.com/question/11477380

#SPJ4

you would expect human red cells to shrink in which of the following solutions: 0.2m nacl 0.2m surcrose 0.2m urea

Answers

You would expect human red cells to shrink in  0.2 M NaCl. The correct answer is A.

Red blood cells have an ion concentration of roughly 300mM, or 300 milliosmolality. Essentially, it indicates that the concentration of all the dissolved ions in a red blood cell is roughly 300 mM, or 0.3M.

Where there is a higher concentration of water, it moves toward a lower concentration. Water flows from lower osmolarity to higher osmolarity, or put another way (since water is higher in concentration in a lower osmolarity solution).

Since a solution of 0.2M NaCl has an osmolarity of 0.4M, the water concentration in red blood cells is higher. This implies that the red blood cell will shrink and shrivel when water flows OUT of it.

Urea 0.2M is a dissolved solute even though it is not ionic. Water will somewhat enter the red blood cell since it is less concentrated than the red blood cell. (assumes red blood cells with 0.3M osmolarity).

In a hypotonic condition, a red blood cell will enlarge and go through hemolysis (burst). A red blood cell will crenate and lose water when it is placed in a hypertonic solution (shrivel). Animal cells typically function best in an isotonic environment, in which the rate of water flow into and out of the cell is equal.

Learn more about red cell at https://brainly.com/question/22018705

#SPJ4

The process of photosynthesis produces which of the following? HELP

oxygen

carbon dioxide

energy

glucose

Answers

Answer:

Explanation:

glucose and oxygen

Explore the Model screen of the simulation. As you explore, answer the following questions. a.How does adding an atom affect the position of existing atoms or lone pairs? b. How does adding a lone pair affect the position of existing atoms and lone pairs?

Answers

The answers for multiple questions are given below.

(a)

When an atom is added it increases the effective nuclear charge which changes the position of existing atoms and lone pairs.

(b)

In the presence of additional lone pair, the lone pair - lone pair repulsions increases which affects the position of existing atoms and lone pairs.

Generally, lone pairs or often a single unpaired electron, electron pairs are defined as particles in bonds. Generally, the three additional pairs of electrons upon every atom are known as lone pairs, whereas the electron pair which are shared by the atoms is called as a bonding pair. Basically, the covalent bonding process excludes lone pairs.

The shape of the molecule is generally altered by the presence of an additional atom. Bonding electron pairs that lone electron pairs always resist one another since, electrons had same charge (i.e., negative charge).

Learn more about bonding pairs from the link given below.

https://brainly.com/question/30194336

#SPJ4

calculate the ph of 500 ml of water to which 15 ml of 1.0 m koh has been added. give your answer to 1 decimal point.

Answers

The pH of 500 ml of water to which 15 ml of 1.0 M KOH has been added is 12.4.

The volume of the water = 500 mL

The volume of the KOH = 15 mL

The total volume = 500 + 15

                            = 515 mL

                           = 0.515 L

The moles of the KOH = molarity × volume in L

The moles of the KOH = 1 × 0.015

                                      = 0.015 mol

The molarity = 0.015 / 0.515

Molarity = 0.029 M

The KOH dissociates is completely, the added [OH] is equal to the [KOH]

pOH = - log ( 0.029 + 10⁻⁷ )

The Hydroxide ion concentration in the water is  1.0 x 10-7M,  is ignored because it is much smaller .

pOH = - log (0.029)

pOH = 1.52

pH = 14 - pOH

pH = 14 - 1.52

pH = 12.4

To learn more about pH here

https://brainly.com/question/29461558

#SPJ4

what is the name for the ion element Na+

Answers

sodium ion is Na+

hope this helps

If the equilibrium constant for the reaction is greater than 1.0, and equal amounts of Q and Rare mixed together, then the reaction will proceed to generate more ___. If the equilibrium constant for the reaction is between 0 and 1, and equal amounts of Q and Rare mixed together, then the reaction will proceed to generate more ___If Keq = 4, and the starting concentrations of Q and Rare both 1.4 uM, then the equilibrium concentration of Q is ____ uM and the equilibrium concentration of R is ____uM

Answers

The concentration of R at Equilibrium is 2.24 microMolar and the concentration of Q at Equilibrium is 0.56 microMolar.

What is Equilibrium constant ?

The equilibrium constant (K) is a measure of the extent to which a chemical reaction has proceeded towards equilibrium, and is defined as the ratio of the concentrations of products to the concentrations of reactants at equilibrium, with each concentration raised to the power of its stoichiometric coefficient. In other words, for a chemical reaction of the form:

aA + bB ⇌ cC + dD

The equilibrium constant is given by:

K = [C]^c [D]^d / [A]^a [B]^b

Where [X] represents the concentration of species X, and a, b, c, and d are the stoichiometric coefficients of species A, B, C, and D, respectively. The equilibrium constant is a dimensionless quantity, and its value depends only on the temperature and pressure at which the reaction is taking place. A larger value of K indicates that the reaction has proceeded further towards the product side at equilibrium.

K = R/Q

4=1.4+x/1.4-x

Therefore, x =0.84

To learn more about the Equilibrium constant, click the given link ;

https://brainly.com/question/26487468

#SPJ4

The ratio mol of soluteL of solution is called the _____ of a solution (symbol M), whereas the _____ (symbol m) of the solution is expressed as mol of solutekg of solvent. For an aqueous solution, these two quantities will be very similar if the solution concentration is _____.
molarity; molality; low

Answers

The molarity of a solution (symbol M) is the ratio of mol of solute to kg of solvent in the solution, whereas the molality (symbol m) is the ratio of mol of solute to kg of solvent in the solution.

What does molarity M mean?

The quantity of a material in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The molar concentration of a solution is another name for molarity.

What does molarity mean simply?

A solution's concentration can be determined by measuring its molarity. It is employed to figure out how much solute or solvent is present. The number of moles of a solute is used to calculate the molarity, or concentration, of a solution or other material in solution.

To know more about molarity visit:

https://brainly.com/question/13889022

#SPJ4

what is the multiplicity of the indicated carbon in an off resonance decoupled c 13 nmr spectrum in off resonance decoupled spectra, direct 13 ch coupling is observed

Answers

There will be two results observed by 13C-NMR spectrum- First at 31 ppm signal is for the more shielded and electron-rich carbon atoms and is upfield. And second at 70 ppm  signal is directed downfield and pertains to the carbon atom, which is more exposed and has an environment poor in electrons.

What is 13C- NMR?

The use of nuclear magnetic resonance (NMR) spectroscopy on carbon is known as carbon-13 (C13) nuclear magnetic resonance, often known as carbon-13 NMR spectroscopy or 13C NMR spectroscopy, or simply as carbon NMR.

Similar to proton NMR (1 H NMR), it enables the identification of carbon atoms in an organic molecule in the same way that proton NMR identifies hydrogen atoms. The only isotope that 13C NMR can detect is 13 C. The predominant carbon isotope, 12 C, is not found.

Therefore 13C NMR spectroscopy is widely used for characterizing organic and organometallic compounds.

To learn more from 13C- NMR from the given link

https://brainly.com/question/28260199

#SPJ4

There are two stable isotopes of chlorine: chlorine -35 and chlorine-37. Given that the average atomic mass of a chlorine atom is 35.45 amu, which if the following statements is true? A. chlorine contains almost exclusively Cl-37 with very little Cl-35 B. Chlorine contains more Cl-35 than Cl-37 C. Chlorine contains roughly equal amounts of Cl-35 and Cl-37 D. Chlorine contains more Cl-37 than Cl-35

Answers

Given that the average atomic mass of a chlorine atom is 35.45 amu, then the true statement would be that Chlorine contains roughly equal amounts of Cl-35 and Cl-37. The correct answer is C.

The average atomic mass of an element is the weighted average of the masses of its naturally occurring isotopes. In the case of chlorine, the atomic mass of the two stable isotopes (chlorine-35 and chlorine-37) is close to each other.

Chlorine-35 has an atomic mass of 34.97 amu and makes up about 75% of naturally occurring chlorine atoms, while chlorine-37 has an atomic mass of 36.97 amu and makes up about 25% of naturally occurring chlorine atoms.

The average atomic mass of chlorine can be calculated using the following formula:

average atomic mass = (fractional abundance of isotope 1 x mass of isotope 1) + (fractional abundance of isotope 2 x mass of isotope 2)

average atomic mass = (0.75 x 34.97 amu) + (0.25 x 36.97 amu)

average atomic mass = 26.23 amu + 9.24 amu

average atomic mass = 35.47 amu

This is very close to the reported average atomic mass of chlorine (35.45 amu), which confirms that chlorine contains roughly equal amounts of Cl-35 and Cl-37.

To learn more about atomic mass unit (amu) visit: https://brainly.com/question/29793336

#SPJ4

Which of the following statements regarding a correlation coefficient of 0.60 for two variables Y and X is most accurate? This correlation:
A) is significantly different from zero.
B) indicates a positive causal relation between the two variables.
C) indicates a positive covariance between the two variables.

Answers

The most accurate statement regarding a correlation coefficient of 0.60 for two variables Y and X is significantly different from zero. Option A is the correct answer.

A correlation coefficienb of 0.60 indicates a moderate positive relationship between the two variables, which is significantly different from zero. This means that there is a statistically significant association between the two variables, but it does not necessarily indicate a causal relationship or the direction of the relationship between the two variables.

Additionally, the correlation coefficient measures the strength and direction of a linear relationship between two variables, and does not capture non-linear relationships or other types of associations between the variables.

To know more about the correlation coefficient, here

brainly.com/question/15577278

#SPJ4

4. If you were to place the skater at the 5-meter mark, how high would the skater go on the other side of the track? Write your prediction, then try it and state whether it matched your prediction or not and, if not, what happened instead.

Answers

If the skater starts at the 5-meter mark, I predict that the skater will reach the same height on the other side of the track. This is because the parabolic shape of the skater's trajectory is symmetrical, meaning that if the skater reaches a certain height at one point, they will reach the same height at the same distance on the opposite side.

This prediction can be tested by drawing a parabolic shape to represent the skater's trajectory and finding the height at the 5-meter mark and the 5-meter mark on the other side of the track.

how do you balance a chemical reaction?

Answers

Balance a chemical reaction by placing the coefficients as needed in front of the symbols or formulas so the same number of each type of atom occurs in both reactants and products.

the activation energy, ea, for a particular reaction is 37.8 kj/mol. if the rate constant at 280 k is 0.178 m/s, then what is the value of the rate constant at 445 k? (r

Answers

The rate constant at 445 K is 0.0122 m/s.

The rate constant at 445 K for the reaction with an activation energy of 37.8 kJ/mol can be calculated using the Arrhenius equation:

k = A*e^{(-Ea/RT)}

Where k is the rate constant at 445 K, A is the pre-exponential factor, Ea is the activation energy, R is the ideal gas constant (8.314 J/molK) and T is the temperature in Kelvin. Substituting the values given we get:


k = 0.178 * e^{(-37.8*10^3/(8.314*445)}


Therefore, the rate constant at 445 K is 0.0122 m/s.

To know more about  rate constant, refer here:

https://brainly.com/question/14977272#

#SPJ11

Which transformation will create $Q'R'S'T'$ , a quadrilateral that is similar but not congruent to quadrilateral $QRST$ ?

Answers

To create a quadrilateral that is similar but not congruent to another quadrilateral, you can apply a non-uniform dilation transformation.

What is non-uniform dilation transformation?

A non-uniform dilation transformation changes the size of a shape by a different scale factor in different directions. This means that the corresponding sides of the similar figures will have different lengths, and the corresponding angles will have the same measure.

To apply a non-uniform dilation transformation to quadrilateral $QRST$, you would need to specify different scale factors for each direction. For example, you could specify a scale factor of 2 in the x-direction and a scale factor of 3 in the y-direction. The resulting transformed quadrilateral, $Q'R'S'T'$, would have sides that are twice as long as the corresponding sides in the x-direction and three times as long as the corresponding sides in the y-direction. The angles of $Q'R'S'T'$ would be the same as the angles of $QRST$.

It is important to note that a non-uniform dilation transformation will not preserve the ratios of side lengths between similar figures, so $Q'R'S'T'$ will not be congruent to $QRST$.

Learn more about non-uniform dilation transformation, here:

https://brainly.com/question/18242733

#SPJ9

What is the energy of a photon with a frequency of 7.07 × 10¹⁴ s⁻¹?
(h = 6.626 × 10⁻³⁴ J • s)

Answers

The energy of a photon with a frequency of 7.07 × 10¹⁴ s⁻¹ is 4.68 × 10⁻¹⁹ J.

What is Frequency?

Frequency is a measure of the number of cycles of a repeating event per unit time. It is commonly used to describe the oscillation of waves, such as sound waves or electromagnetic waves. The unit of frequency is hertz (Hz), which represents one cycle per second.

The energy (E) of a photon can be calculated using the equation:

E = hf

Given:

Frequency (f) = 7.07 × 10¹⁴ s⁻¹

Planck's constant (h) = 6.626 × 10⁻³⁴ J • s

Using the equation, we get:

E = hf

E = 6.626 × 10⁻³⁴ J • s × 7.07 × 10¹⁴ s⁻¹

E = 4.68 × 10⁻¹⁹ J

Therefore, the energy of a photon with a frequency of 7.07 × 10¹⁴ s⁻¹ is 4.68 × 10⁻¹⁹ J.

Learn more about Frequency from given link

https://brainly.com/question/254161

#SPJ1

Alcoholic beverages are a mixture of water, ethanol, and natural flavoring. Describe why placing an alcoholic beverage in a freezer will not result in a solid, frozen product. (For context, we just finished talking about colligative properties and freezing point depression. :))

Answers

Placing an alcoholic beverage in a freezer will not result in a solid, frozen product because the freezing point of ethanol is very low.

Alcoholic beverages are defined as any fermented liquor, such as wine, beer, or distilled spirits, that contains ethyl alcohol, or ethanol (CH₃CH₂OH), as an intoxicating agent.

When we place alcohol in a freezer it often does not get frozen. This happens because we can't get it cold enough. Generally the freezing point of ethanol (the main component of alcohol) is -114 C or (-173 F). And our home freezer probably doesn't go below -20 F at its best.

Learn more about ethanol from the link given below.

https://brainly.com/question/28487809

#SPJ4

What is the molecular formula for a compound that is 92.24% carbon and 7.76% hydrogen and has a molar mass of 78.12g?

Answers

The empirical formula of a compound gives the whole number ratio of atoms of various elements. The molecular formula of the compound is C₆H₆.

What is Molecular formula?

The molecular formula of a compound is defined as the formula which gives the actual number of atoms of various elements present in one molecule of the compound.

Here 92.24 % 'C' = 92.24 g

7.76 % 'H' = 7.76 g

Number of moles (n) = Given mass / Molar mass

'n' of 'C' = 92.24 / 12 = 7.68 moles

'n' of 'H' = 7.76 / 1 = 7.76 g

Number of atoms of 'C' = 7.68 / 7.68 = 1

Number of atoms of 'H' = 7.76 / 7.68 = 1

So empirical formula is CH.

The molecular weight of CH = 13

Number of atoms of each element = 78.12 / 13 = 6

Thus the molecular formula is C₆H₆.

To know more about molecular formula, visit;

https://brainly.com/question/28647690

#SPJ1

Other Questions
The Smith family went out to dinner. The total cost for the meal, including tax, was $87.98. The family left a 15% tip. What was the final cost of the meal, including the tip? Round to the nearest hundredths. What is the meaning of simple random sampling? who did atticus think killed bob ewell? who actually killed him? You have built a table to collect the results of a survey. In a field called Comment, you are not able to enter all of the text from the survey response. What must be changed in your table to allow you to type all of the survey response text in the Comment field?The Data Type must be changed to Memo. judy believes that her fate is determined by her own actions. judys belief best illustratesa. self-actualizationb. psychological reactancec. a preoperational schemad. the basis for psychological deteminisman e. internal locus of control In a classroom demonstration the pressure inside a soft drink can is suddenly reduced to essentially zero. Assuming the can to be a cylinder with a height of 15 cm and a diameter of 7.0 cm , find the total inward force exerted on the vertical sides of the can due to atmospheric pressure. Which of the following technologies are necessary for implementing USB drive encryption or hard drive encryption? [Choose two that apply.] -TPM - HFS - TACAC - HSM A patient who is suspected of being hypoxic and is breathing adequately should be given supplemental oxygen with a:a.nonrebreathing mask.b.nasal cannulc.bag-valve mask.d.mouth-to-mask devic need help with this fast plssss!!!! please use the following debit and credit entries for various bop accounts (in billions of $) to answer the next question: account credit debit capital 600 1,200 net investment income 10 6 service 140 150 merchandise 4,000 3,000 official reserve 200 800 unilateral transfers 30 4 The Balance of Trade should be in billions of $): 990 surplus 960 deficit 964 deficit 986 deficit 2160 surplus Why is titanium non-magnetic? Very rapid speciation occurred when cichlid fishes were isolated in Lake Victoria. Widespread extinction was dramatically seen whenA. artificial selection stopped.B. predatory fish were added.C. hybridization stopped.D. fishing was prohibited.E. insect larvae stocks were depleted. _________is a professional person skilled in providing large volumes of current information to professional staff and personnel in medicine, dentistry, nursing, pharmacy, and other allied health professions Which IS NOT a quality of an effective rule?Posted in a visible locationIncludes as much detail as possibleWritten in clear concise languageEnforced in the same way each time How do you think it would feel to be outside or excluded from a group? booker t washington and web du bois offered different strategies for dealing with the problems of poverty and discrimination faced by african americans at the end of the nineteenth and dbq examples which astronomer is called out in the song bohemian rhapsody I need to know this question Larry wants to do everything possible to be in a position to detect that a treatment he has designed is effective given that it is actually effective. Which of the following should he do?a. decrease the sample sizeb. decrease the population standard deviationc. use an alpha (a) of .01 instead of .05d. use an alpha (a) of .05 instead of .01 what is equation for molality?