If 0.5 kg of this material is used in a transformer core, how long would it have to operate at a frequency of 60 cps to heat up 1

Answer:

superset

Explanation:

Answer:

1. [tex] E = 1.14 \cdot 10^{13} N/C [/tex]

2. [tex]E_{k} = 9.1 \cdot 10^{-17} J[/tex]      

Explanation:

1. The strength of the nucleus' electric field (E):

[tex]E = \frac{kq}{r^{2}}[/tex]

Where:

k: is the Coulomb constant = 9x10⁹ Nm²/C²

q: is the proton charge = 1.6x10⁻¹⁹ C

r: is the radius = 10⁻¹⁰ m

[tex]E = \frac{kq}{r^{2}} = \frac{9\cdot 10^{9} Nm^{2}/C^{2}*79*1.6 \cdot 10^{-19} C}{(10^{-10} m)^{2}} = 1.14 \cdot 10^{13} N/C[/tex]

2. The kinetic energy (Ek) of an electron is the following:

[tex] E_{k} = \frac{1}{2}mv^{2} [/tex]    

Where:

m is the electron's mass = 9.1x10⁻³¹ kg

v: is the speed of the electron

We can find the speed of the electron by equaling the centripetal force (Fc) and the electrostatic force (Fe):

[tex] F_{c} = F_{e} [/tex]  

[tex] \frac{mv^{2}}{r} = \frac{kq^{2}}{r^{2}} = qE [/tex]

[tex] v^{2} = \frac{qEr}{m} = \frac{1.6 \cdot 10^{-19} C*1.14 \cdot 10^{13} N/C*10^{-10} m}{9.1 \cdot 10^{-31} kg} = 2.00 \cdot 10^{14} m^{2}/s^{2} [/tex]                  

Now, we can find the kinetic energy:

[tex] E_{k} = \frac{1}{2}mv^{2} = \frac{1}{2}9.1 \cdot 10^{-31} kg*2.00 \cdot 10^{14} m^{2}/s^{2} = 9.1 \cdot 10^{-17} J [/tex]    

I hope it helps you!

Answer:

Newton's second law of motion pertains to the behavior of objects for which all existing forces are not balanced. The second law states that the acceleration of an object is dependent upon two variables - the net force acting upon the object and the mass of the object.

Explanation:

Newton's second law says that when a constant force acts on a massive body, it causes it to accelerate, i.e., to change its velocity, at a constant rate. In the simplest case, a force applied to an object at rest causes it to accelerate in the direction of the force

Answer:

Correct choice: D. Object A is the fastest

Explanation:

In a distance vs time graph, the distance is plotted vertically, and the time is plotted horizontally.

The diagram shows three graphs of objects A, B, and C.

The graph of A shows the object traveled 12 meters in 3 seconds, for a speed of 12/3= 4 m/s.

The graph of B shows the object traveled 8 meters in 4 seconds for a speed of 8/4=2 m/s.

Finally, the object C travels 4 meters in 4 seconds, for a speed of 4/4= 1 m/s

Thus, the fastest object is A.

Answer:

500

Explanation:

The net forces should be subtracted, so the number would be 500 N.

Answer:

the net force acting on the piano is -500N.

Explanation:

[tex]F=F_{g} -F_{t} \\F=5,500-6,000\\F=-500N[/tex]

An external agent that can change, shape, size, position, and direction is  called force.

https://brainly.com/question/26115859

#SPJ2

Answer:

B) 200 [J]

Explanation:

In order to solve this problem we must remember the definition of work which tells us that it is equal to the product of force by a distance, in this case, the force is the weight of the ball. The distance traveled is 4 [m] since 6-2 = 4[m]

F = m*g

where:

m = mass = 5 [kg]

g = gravity acceleration = 10 [m/s^2]

F = 5*10 = 50 [N]

w = F*d

where:

F = force = 50 [N]

d = 4 [m]

w = 50*4 = 200 [J]

Answer:

it keeps it growing because if it stays warm and yuh put it by a plant that needs sun yk

Explanation:

A flower of a plant that can stay warm at night as it keeps it growing.

The roots are the underground part of the plant which plays a major role in pulling the water and minerals,  expands within the ground  for better water absorption, anchors which helps in creating better stability.

A stem present above the ground bears leaves, fruits plus flowers.  as it distributes the nutrients and minerals to the leaves, shields the plant and assists in asexual dissemination.

leaf is one of the most major parts of a plant as it contain chlorophyll pigment which assists the plants in preparation for food, the veins allow the flowing of nutrients plus water, it has the parts like petiole, leaf base and lamina help in photosynthesis.

Flower is the most bright and beautiful part of the plant show an important role in making food, used in fertilization process , the basic parts are petals, sepals, stamens, and pistil.

For more details  plant,  visit

https://brainly.com/question/1283049

#SPJ2

Answer:

C anterior and posterior

Explanation:

c

From the calculations, the resistance of the material is 1.1 ohm.

Given that;

R α l/A

R = ρl/A

R = resistance

l = length

A = Area

ρ = resistivity

Now;

A = πr^2

A = 3.142 * (1.5 * 10^-3/2)^2

A = 1.77 * 10^-6 m^2

ρ = RA/l

ρ =  2.5 *  1.77 * 10^-6 /20

ρ = 2.2 * 10^-7 ohm/m

Now;

R =ρl/A

A =  3.142 * (3  * 10^-3/2)^2

A = 7.1 * 10^-6 m^2

Thus

R = 2.2 * 10^-7 * 35/ 7.1 * 10^-6

R = 1.1 ohm

Learn more about resistivity:https://brainly.com/question/14547003

#SPJ1

Answer:

I do not understand what you are asking

Answer:

I believe the electromagnetic field should be reversed.

Explanation:

When a student creates an electromagnetic wave and then reverses the direction of the current, the direction of the magnetic field will be reversed.

An electromagnetic wave may be defined as a type of wave that is significantly created as a result of vibrations between an electric field and a magnetic field. These waves are composed of oscillating magnetic and electric fields.

According to the context of this question, when an individual is constructing an electromagnetic wave and then reverses the direction of the current, it will eventually affect the direction of the magnetic field in the same direction with respect to the current. So, if the direction of the current is reversed, the direction of the magnetic field would also be reversed.

Therefore, when a student creates an electromagnetic wave and then reverses the direction of the current, the direction of the magnetic field will be reversed.

To learn more about Magnetic fields, refer to the link:

https://brainly.com/question/14411049

#SPJ6

Your question seems incomplete. The most probable complete question is as follows:

A student creates an electromagnetic wave and then reverses the direction of the current. Which of the following will happen to the magnetic field?

Answer:

A. 8.64 secs.

B. 14.58 secs.

C. 26.002 secs.

D. 33.46secs.

Explanation:

A. P wave would travel 7000km

p-wave travels on a speed of 13.5km/s

= 7000km/13.5km/s

= 8.64 secs.

B. S-wave time to travel 7000km

s-wave travels on a speed of 8km/s

= 7000km/8km/s

= 14.58 secs.

C Love wave travels at a speed of 10,000m/s ( 2.7778 m/s ).

= 7000km to miles

= 4349.598m/2.788m/s

= 26.002 secs.

D. Rayleigh wave to travel 7,000 km

10,000m/s ( 2.1667 m/s ).

= 7000km to miles

= 4349.598m/2.1667m/s

= 33.46secs.

Answer:

2nd option on edge2021

Explanation:

Answer:

If gravity were stronger, houses and buildings would have to be more sturdy so they do not get crushed to the ground. If gravity were weaker, buildings and houses would have to be built stronger so they do not float away.

Hope this helps you!

Complete Question

How many turns are in its secondary coil, if its input voltage is 120 V and the primary coil has 210 turns.

The output from the secondary coil is  12 V

Answer:

The value  is  [tex]N_s  =  21 \  turns [/tex]

Explanation:

From the equation we are told that

   The input voltage is  [tex]V_{in}  = 120 \ V[/tex]

   The number of turns of the primary coil is [tex]N_p =  210 \  turn[/tex]

    The output from the secondary is [tex]V_o =  12V[/tex]

From the transformer equation

   [tex]\frac{N_p}{V_{in}}  =\frac{N_s}{V_o}[/tex]

Here [tex]N_s[/tex] is the number of turns in the secondary coil

=> [tex]N_s  =  \frac{N_p}{V_{in}}  *  V_s[/tex]

=>[tex]N_s  =  \frac{210}{120}  *  12[/tex]

=>[tex]N_s  =  21 \  turns [/tex]

Answer:

168

Explanation:

Answer: a 15 kg object would weigh the most on Neptune

168 N

Answer:

it takes more effort to lift

Explanation:

because your moving the object weights up. While pushing, you only have to over ride the friction of the object against the ground. Because the coefficient of friction between a box and the ground is usually less than 1.

Answer:

Na sodium

Mg magnesium

Be beryllium

Explanation:

Nel is not any element it is wrong

Answer:

uhh more mass = more pull by gravity = ship go sinky more

Explanation:

Answer:

South pole

Explanation:

In a bar magnet, field lines go from the North Pole to the South Pole (outside the magnet).

As the earth magnetic field lines go from South Pole (geographic) to the North one, this means that the North pole (geographic) really behaves as a South Pole (magnetic).

Complete Question:

A pilot drops a package from a plane flying horizontally at a constant speed. Neglecting air resistance, when the package hits the ground the horizontal location of the plane will

A. be behind the package.

B. be over the package.

C. be in front of the package.

D. depend on the speed of the plane when the package was released.

Answer:

B.

Explanation:

As no other horizontal forces are present, due to the horizontal movement and the vertical one are independent each other (as they are perpendicular), the plane and the package continue moving horizontally at the same speed, so when the package hits the ground (due to the action of gravity in the vertical direction only) the plane will be exactly over the package.

The package hits the ground in such a way that the plane will be exactly over the package.

The given problem is based on the effect of air resistance on the motion of object. The resistive force exerted on any object on account of dust, and other air particles is known as air resistance or simply as air drag.

In the given problem, as no other horizontal forces are present, due to the horizontal movement and the vertical one are independent each other (as they are perpendicular), the plane and the package continue moving horizontally at the same speed.

So when the package hits the ground (due to the action of gravity in the vertical direction only) the plane will be exactly over the package.

Thus, we can conclude that the package hits the ground in such a way that the plane will be exactly over the package.

Learn more about the air drag here:

https://brainly.com/question/14755232

This question is incomplete, the complete question is;

For this force system the equivalent system at P is ___________

A) FRP = 40 lb (along +x-dir.) and MRP = +60 ft.lb

B) FRP = 0 lb and MRP = +30 ft.lb

C) FRP 30 lb (along +y-dir.) and MRP  = -30 ft.lb

D) FRP 40 lb (along +x-dir.) and MRP = +30 ft.lb

Answer:

D) FRP 40 lb (along +x-dir.) and MRP = +30 ft.lb

Explanation:

From the figure in the image i uploaded along this answer;

FRP = ( 40 lb i + 30 lb j ) + [30 lb (-j)]

Where i  and j are the unit vectors along X & Y axis respectively.

So, FRP = 40 lb i

that is,  FRP = 40 lb along +X direction

MRP = [ 30 lb x ( 1 ' + 1' ) ] +( -30 lb x 1 ' )

= (30 lb x 2 ' )- 30 lb ft

= 60 lb ft - 30 lb ft

= 30 lb ft

Therefore option(D) is correct    

Answer:

a: 19.6 meters b: 9.8meters per second

Explanation:

speed and object falls is 9.8 meters per second. 9.8 meter times 2 is 19.8 meters.

Answer:

jenny

Explanation:

Answer:

hello your question is incomplete attached below is the complete question

answer : Ax = 126.13 N

              Ay = 42.04 N

               Az = 84.09 N

               Cz = 0

               T ( tension ) =  294.3

Explanation:

The Reactions at A and C

Ax = [tex]\frac{3*294.3}{7}[/tex] = 126.13 N

Ay = [tex]294.3 - \frac{6*294.3}{7}[/tex]   = 42.04 N

Az = [tex]\frac{2}{7} * 294.3[/tex]  =  84.09 N

Cz = T - 294.3

     = 294.3 - 294.3 = 0

The Tension in the cable BD

294.3 - T = 0

therefore T = 294.3  

attached below is the detailed solution  

Answer:

f > 60 Hz

Explanation:

       [tex]f = \frac{1800 rev}{min} * \frac{1 min}{60 sec} = 30 Hz[/tex]

        ⇒ fs > 60 Hz