If 0.025 gram of pb (No3)2 is dissolved in 100 gram of H2o ,what is the concentration of the resulting solution ,in parts per million?

The approximate mass of an atom can be determined by measuring the relative atomic mass (or atomic weight) of the element in question.

Atomic mass units (amu) are a unit of mass used to measure the mass of individual atoms. This is done by looking up the element in the periodic table, where the atomic weight is listed in the top right corner of each element's box. This number is typically given to one or two decimal places, and it represents the mass of an atom in amu.

The equation for calculating the approximate mass of an atom in atomic mass units is as follows:

Approximate Mass (amu) = Relative Atomic Mass (from periodic table)

learn more about Atomic mass units Refer:brainly.com/question/12149512

#SPJ4

The atomic weight of a hypothetical element is 137.3 g/mol, and it has a bcc crystal structure with an atomic radius of 0.132 nm. The density of this element is 9.05 g/[tex]cm^3.[/tex]

The body-centered cubic (bcc) crystal structure has 2 atoms per unit cell, and the atomic radius (r) of the element is 0.132 nm. The volume of the unit cell (V) can be calculated as:

V = a^3 * [tex]2^(1/2)\\[/tex]

a = 4(0.132 nm) / [tex](3)^(1/2)[/tex] = 0.3579 nm

V = (0.3579 nm)^[tex]3 * 2^(1/2)[/tex]= 0.04516 nm^3

Avogadro's number (NA) is 6.022 x [tex]10^23 mol^-1.[/tex] The mass of one atom (m) can be calculated as:

m = M / NA

m = 137.3 g/mol / (6.022 x [tex]10^23 mol^-1[/tex]) = 2.281 x [tex]10^-22[/tex]g

The density (ρ) of the element can be calculated as:

ρ = (2 * m) / V

ρ = 2(2.281 x [tex]10^-22[/tex] g) / 0.04516[tex]nm^3[/tex]

Converting nm to cm:

1 nm = 1 x[tex]10^-7[/tex] cm

0.04516[tex]nm^3[/tex] = (0.04516 x [tex]10^-7[/tex] cm)^3 = 0.8217 x[tex]10^-21 cm^3[/tex]

ρ = 9.05 g/[tex]cm^3[/tex]

Therefore, the density of this hypothetical element with a bcc crystal structure, an atomic radius of 0.132 nm, and an atomic weight of 137.3 g/mol is 9.05 g/[tex]cm^3.[/tex]

Learn more about atomic radius here:

https://brainly.com/question/238050

#SPJ4

The solution of sucrose would not conduct electricity, since sucrose is a non-ionic compound. The solutions of ammonia (NH3) and hydrochloric acid (HCl) would both conduct electricity, since ammonia and HCl are both ionic compounds.

When a substance is dissolved in water, it can form ions that can then conduct electricity. Ions are atoms or molecules that have an electric charge, and ionic compounds are those that contain both positively and negatively charged ions. Non-ionic compounds, such as sucrose, do not form ions when dissolved in water, and so they do not conduct electricity.

Learn more about non-electrical conductive solutions:

https://brainly.com/question/14301776

#SPJ4

Depending on the rate of oxygen diffusion into the cell mass and the rate of oxygen consumption by the cells, the greatest radius of a cell mass that may be tolerated before an anoxic core begins to form.

Radius is a mathematical term that refers to the length from a circle's or sphere's centre to its outside edge. It is a unit of length and is frequently represented by the letter "r". A circle's or a sphere's radius is a crucial characteristic since it affects the object's size and shape. The radius is also used to compute the circumference and area of a circle or sphere, two additional significant features. In addition to mathematics, the term "radius" is used to describe many facets of things and systems in a number of other disciplines, including biology, physics, and engineering.

Learn more about "radius" here:

https://brainly.com/question/13707540

#SPJ4

The concentration of the potassium dichromate used to make the new solution is 0.0763 M.

The total volume of the new solution is 379 + 448 = 827 mL.

The total amount of potassium ions in the new solution is 0.713 * 827 = 594.491 mol.

The amount of potassium bromide in the new solution is 0.12 * 379 = 45.48 mol. The amount of potassium dichromate in the solution is 594.491 - 45.48 = 549.011 mol.

The concentration of potassium dichromate in the solution is 549.011 / 448 = 0.0763 M.

The concentration of the potassium dichromate used to make the new solution is 0.0763 M.

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ4

The molecular formula is then C8H14, meaning there are 8 carbon atoms and 14 hydrogen atoms in one molecule of cyclooctane.

What is cyclooctane?

Cyclooctane is a cycloalkane hydrocarbon consisting of eight carbon atoms arranged in a ring. It is an organic compound and is classified as an aromatic hydrocarbon due to its aromatic character. It is a colourless, flammable liquid with a low boiling point and a strong smell. Cyclooctane is used in the production of certain plastics, in the synthesis of drugs and chemicals, and as a solvent.

The molecular formula of cyclooctane can be calculated by using the following formula:

Number of moles (n) = Mass (m) / Molar mass (M)

n = 112.2 g / 112.2 g/mol

= 1 mol

To determine the number of carbon atoms in the molecule, multiply the number of moles (1) by the percent of carbon by mass (85.6%).

n_C = 1 mol x 85.6% = 0.856 mol

To determine the number of hydrogen atoms in the molecule, multiply the number of moles (1) by the percent of hydrogen by mass (14.4%).

n_H = 1 mol x 14.4% = 0.144 mol

The molecular formula is then C8H14, meaning there are 8 carbon atoms and 14 hydrogen atoms in one molecule of cyclooctane.

To learn more about cyclooctane

https://brainly.com/question/14997108

#SPJ4

In the case of calcium fluoride, the unit cell shows one calcium ion and two fluoride ions, meaning the empirical formula is CaF2.

The empirical formula of a compound is the simplest whole number ratio of its constituent elements.

The empirical formula of a compound represents the simplest whole number ratio of atoms in a molecule. To find the empirical formula for calcium fluoride, we need to determine the ratio of calcium and fluoride ions in the crystalline lattice of fluorite. In the unit cell shown, there are equal numbers of calcium ions (darker spheres) and fluoride ions (lighter spheres). This means the ratio of calcium to fluoride is 1:1, which gives us the empirical formula of CaF2.

Learn more about empirical formula:

brainly.com/question/14044066

#SPJ4

The number of moles in butane C4H10 in 151gm of butane is 2.605 moles.we can do this with the help of molecular weights of C,H.

To calculate the number of moles in 151 grams of butane (C4H10), we need to determine the molecular weight of butane. The molecular weight of butane can be calculated using the atomic masses of its elements:

1 mole of C = 12 g 1 mole of H = 1 g

So, the molecular weight of butane can be calculated as: 4 moles of C * 12 g/mole + 10 moles of H * 1 g/mole = 4 * 12 + 10 * 1 = 48 + 10 = 58 g/mole

Now that we know the molecular weight of butane, we can use it to calculate the number of moles in 151 grams of butane:

151 g of butane / 58 g/mole = 2.605 moles

Therefore, there are 2.605 moles of butane in 151 grams of butane.

Learn more about butane here:

https://brainly.com/question/14818671

#SPJ4

The balanced equation for the reaction of ammonia and oxygen using the smallest whole-number coefficients is given below:

4 NH₃ (g) + 3 O₂ (g) --->  2 N₂(g) + 6 H₂O (g) + energy

Ammonia, NH₃ (g), can be used as a substitute for fossil fuels in some internal combustion engines.

The reaction between ammonia and oxygen in an engine is represented by the unbalanced equation below.

NH₃ (g) + O₂ (g) --->  N₂(g) + H₂O (g) + energy

Balancing the equation for the reaction of ammonia and oxygen involves using the smallest whole-number coefficients placed before the reactants and products.

Learn more about balanced equations at: https://brainly.com/question/26694427

#SPJ1

The mineral might be used for the panes of windows is the mica. The tests be performed to determine the mineral could be used for windows is the property of  Transparency of the solidified melt.

The Mica is the naturally occurring mineral that will forms from the many thin layers. It can be split into the layers so that the thin  can be use as  the windows. The transparency of the solidified melt will be the most important property of the mineral that is used in the modern window panes.

Thus, the mica is the mineral that can be used for the panes of the windows.

To learn more about minerals here

https://brainly.com/question/8265566

#SPJ4

The final concentration of Chlorine gas in the flask is 0.55M.

The initial concentration of PCl5 can be calculated using the number of moles and volume:

[PCl5] = n/V = 3.2 mol / 2.0 L = 1.6 M

At equilibrium, the concentration of products and reactants remains constant. Therefore, the concentration of Cl2 can be determined using the equilibrium constant (Kc) and the initial concentration of PCl5:

Kc = [PCl3][Cl2] / [PCl5]

[Cl2] = Kc × [PCl5] / [PCl3] = 0.47 × 1.6 M / [PCl3]

Since [PCl3] is not given, we cannot determine the exact concentration of Cl2. However, the answer choices can be used to estimate the closest answer. Based on the answer choices, the closest estimate is 0.55 M, which is answer choice A.

Learn more about Chlorine gas:

brainly.com/question/13123721

#SPJ4

When a strong acid and a strong base are titration together, the acid and base will mix to form a neutral solution. The hydronium (H+) and hydroxide (OH-) ions will unite to create water.

Titration, also known as titrimetry, is a technique for analyzing a mixture's composition chemically to ascertain the concentration of a certain analyte. Volumetric analysis is another name for titration, a key analytical chemistry technique.

A standard solution with a set volume and concentration is created as part of the titration process and is known as a titrant or titrator. When an endpoint or equivalence point is attained, the titrant is made to continue reacting with the analyte, and at that point, the concentration of the analyte can be determined from the amount of titrant consumed. Titration is another method for using the stoichiometry principle to figure out the concentration of an unknown solution.

Learn more about titration here:

https://brainly.com/question/2728613

#SPJ4

The effect of radiation that occurs when ionizing radiation interacts directly with a radiosensitive molecule is called direct effect.

The radiolysis of water is an instance of an instantaneous impact of radiation publicity in humans. In the direct action, the radiation hits the DNA molecule directly, disrupting the molecular shape. Such structural alternate ends in cell harm or maybe cellular death. Damaged cells that live to tell the tale can also additionally later set off carcinogenesis or different abnormalities. A long-time period somatic impact is the harm to cells which can be always reproducing. These cells are the maximum touchy to radiation due to the fact any modifications made withinside the discern cell's chromosome shape can be transmitted to its daughters.

To learn more about chromosomes check the link below:

https://brainly.com/question/11912112

#SPJ4

The accepted iron:copper ratio ranges from 1:1 to 15:1. For comparison, our Optimizers have an average iron:copper ratio of 12.6.

What is the meaning of participating?

In our daily lives, many chemical reactions take place. Burning, corrosion, food preparation, and digestion are typical examples of these reactions. Precipitation reactions are a significant class of chemical reactions. Two different soluble salts that are in aqueous solutions combine in these reactions to create two products. One of these products, which is referred to as the "precipitate," is insoluble in the solution and precipitates out.

Supplemental zinc can reduce the absorption of copper and raise demand for it. Birth control, eating a lot of foods high in copper like liver, and leaching copper from copper pipes and pans can all have an adverse effect on how well zinc and iron are absorbed.

To learn more about chemical reactions, click on the below link:

https://brainly.com/question/1375919

#SPJ4

The type and number of electrons transferred between the two elements depend on the location of each element in the periodic table. Generally, metals lose electrons to form cations, while nonmetals gain electrons to form anions.

Electrons are tiny particles that carry a negative charge and orbit the nucleus of an atom. They are the building blocks of matter, and their properties are the basis for understanding the behavior of all matter. Electrons are the smallest known particles, and have a mass that is approximately 1/1836th of a proton. Electrons are part of the electromagnetic force and are responsible for electrical, chemical, and optical behavior. Electrons can move from one atom to another, and this is what allows them to form bonds and create molecules. Electrons also form a cloud of negative charge around the nucleus of an atom, helping to keep the atom stable and together. The electrons of an atom can also interact with other atoms and particles, and this is what allows them to form compounds and materials.

To learn more about electrons

https://brainly.com/question/26084288

#SPJ4

The resulting pressure will be the average of the pressures in container A and container B.

The pressure of the resulting mixture of gases will be equal to the average of the initial pressures in container A and container B. The volume of the mixture is equal to the sum of the volumes of the two containers, so the pressure will be proportional to the number of gas particles present. To find the average pressure, we can add the initial pressures in container A and container B and divide by 2. In this case, the average pressure is (2.50 atm + 4.80 atm) / 2 = 3.65 atm.

container b holds 174 ml of a different ideal gas at 4.80 atm. container a and container b are glass spheres connnected by a tube with a stopcock. container a is larger than container b. if the gases are allowed to mix together,

Learn more about pressure here:

https://brainly.com/question/12971272

#SPJ4

Therefore, there are 73.3 grams of sodium in the final container.

Sodium chloride (NaCl) is a neutral compound, meaning it is neither acidic nor basic. It is a salt formed by the combination of sodium (Na+) and chloride (Cl-) ions, which have a neutral charge and therefore do not affect the pH of a solution.

Firstly, the number of moles of sodium in the solution will be:

n = C * V = 5.72 M * 564.2 mL = 3.21 moles

Next, we convert the number of moles of sodium to grams:

mass = n * atomic mass = 3.21 moles * 22.99 amu/mole = 73.3 grams

To know more about sodium visit :-

brainly.com/question/29327783

#SPJ1

To calculate the number of molecules of lactic acid causing you pain in your leg muscles, you will need to use the molar mass of lactic acid (C3H6O3), which is 123 + 16 + 16*3 = 36 + 6 + 48 = 90 g/mol.

Then, divide the mass (5.0 g) by the molar mass of lactic acid to calculate the number of moles of lactic acid present: 5.0 g / 90 g/mol = 0.0556 moles.

Finally, multiply the number of moles by Avogadro's number (6.022 x 10^23) to calculate the number of molecules present: 0.0556 moles x (6.022 x 10^23 molecules/mole) = 3.33 x 10^22 molecules.

Learn more about lactic acid:

https://brainly.com/question/14279880

#SPJ4

Nitrous oxide is sometimes used as a source of oxygen gas. Therefore, the volume of N[tex]_2[/tex]O and O[tex]_2[/tex] are 2.22 L and  1.11L respectively.

Nitrous oxide (N2O), also known as dinitrogen monoxide, laughing gas, as well as nitrous, is a colorless gas with a pleasant, sweetish odor and taste that, when breathed, causes insensibility to pain, followed by moderate hysteria and, occasionally, laughter.

In 1772, the English scientist Joseph Priestley discovered nitrous oxide; another English chemist, Humphry Davy, later identified it as well and demonstrated its physiological function. Nitrous oxide is mostly used as an anesthetic in short-term surgical procedures; prolonged inhalation results in bad.

2N[tex]_2[/tex]O(g)→2N[tex]_2[/tex]O(g)+O[tex]_2[/tex](g)

volume of N[tex]_2[/tex]O = 2.22 L

volume of N[tex]_2[/tex]O =2.22 L

volume of O[tex]_2[/tex] = 1.11L

Therefore, the volume of N[tex]_2[/tex]O and O[tex]_2[/tex] are 2.22 L and 1.11L respectively.

To learn more about nitrous oxide, here:

https://brainly.com/question/14931378

#SPJ1

A 10% glucose solution is contained in a balloon that is impermeable to glucose but not water. a beaker contains a 5% glucose solution. while glucose molecules cannot pass through the balloon into the beaker.

Since the balloon is permeable to water but not to glucose, water molecules can pass through the membrane of the balloon from the beaker into the balloon, while glucose molecules cannot pass through the balloon into the beaker.

Initially, the concentration of glucose in the balloon is 10%, which is higher than the concentration of glucose in the beaker, which is 5%. As a result, This process is called osmosis. AS water molecules move from the beaker into the balloon, the volume of the balloon will increase. This increase in volume will continue until the concentration of glucose on both sides of the membrane is equal, or until the pressure inside the balloon is high enough to prevent further water molecules from entering the balloon.

Learn more about glucose molecules here:

https://brainly.com/question/2396657

#SPJ4

According to the question, 0.343 grams of hydrogen chloride are produced.

What is hydrogen chloride?

Hydrogen chloride is a colorless, corrosive gas with a pungent odor. It is a hydrogen halide and a diatomic molecule, consisting of one atom of hydrogen and one atom of chlorine.

NaCl + H2SO4 → Na2SO4 + HCl

Since the amount of sodium chloride is given (20 g), we can calculate the amount of hydrogen chloride produced.

Since 1 mole of sodium chloride reacts with 1 mole of sulfuric acid, the number of moles of sodium chloride and sulfuric acid used in the reaction will be the same.

We can calculate the number of moles of sodium chloride used in the reaction by dividing the mass of sodium chloride (20 g) by its molar mass (58.44 g/mol).

Number of moles of sodium chloride used = 20 g / 58.44 g/mol = 0.343 moles

Since the number of moles of sodium chloride used is 0.343, the number of moles of hydrogen chloride produced will also be 0.343.

To learn more about hydrogen chloride
https://brainly.com/question/20728408

#SPJ4

Answer:

Tonicity depends only on the concentration of nonpenetrating solutes, so any solution of pure glucose will be hypotonic, no matter what its osmolarity, and tonicity describes only the change in cell volume at equilibrium.

A solution can be described as hyperosmotic if it has a higher concentration of solute particles compared to another solution, while a solution is described as hypotonic if it has a lower concentration of solute particles compared to another solution.

It may seem contradictory to say that a solution can be both hyperosmotic and hypotonic, but it is possible in certain situations.

One example is when comparing a solution with a higher concentration of non-permeating solutes to a solution with a lower concentration of non-permeating solutes. Non-permeating solutes are solutes that cannot pass through the cell membrane, and therefore do not affect the concentration of solutes inside the cell.

If a solution with a higher concentration of non-permeating solutes is placed next to a solution with a lower concentration of non-permeating solutes, the first solution is hyperosmotic, but if the cell is placed in the higher concentration solution, it is hypotonic to the cell.

This is because water molecules will move from the hypotonic solution (the one with lower concentration of solutes) to the hyperosmotic solution (the one with higher concentration of solutes), causing the cell to swell and potentially burst.

Know more about "hyperosmotic":-

https://brainly.com/question/13895898#

#SPJ11

the percent recovery of ibuprofen in the recrystallization using ethanol is 73.07% to the nearest 0.01%.

The percent recovery of ibuprofen in the recrystallization using ethanol can be calculated as follows:

Percent recovery = (Mass of pure ibuprofen / Mass of crude ibuprofen) * 100

Plugging in the values, we have:

Percent recovery = (4.33 g / 5.93 g) * 100

Percent recovery = 73.07%

So, the percent recovery of ibuprofen in the recrystallization using ethanol is 73.07% to the nearest 0.01%. This value represents the fraction of the starting material that was recovered as pure product after the recrystallization process. A high percent recovery is desirable

Learn more about recrystallization here:

https://brainly.com/question/29215760

#SPJ4

The type of bond present in the picture below for both A and B are “polar covalent bond and "dipole-dipole attraction” respectively.

The ability to form molecules and crystals is made possible by a chemical bond, which is a strong attraction between atoms or ions. The bond may be created by the sharing of electrons in covalent bonds or by the electrostatic interaction between ions that have opposing charges.

Other forms of forces present in molecules of compounds are intermolecular forces such as dipole-dipole attraction" and hydrogen bonds.

Learn more about chemical bonds at: https://brainly.com/question/819068
#SPJ1

The equation for the combustion of butane is C4H10 + O2 --> CO2 + H2O.

Combustion is a chemical reaction between a fuel and an oxidizing agent, usually oxygen, to produce energy, usually in the form of heat and light. Combustion can be used to generate electricity, power engines, and heat homes and buildings. Combustion is also used in a wide variety of industrial processes, such as smelting, manufacturing, and food production. In combustion, the fuel is oxidized, releasing energy in the form of heat and light. This energy is usually released in the form of heat, but some fuels, such as hydrogen, can also be used to produce light. Combustion is an exothermic reaction, meaning that it releases energy in the form of heat.

When 9.7 grams of butane reacts with 34.7 grams of oxygen, 29.3 grams of carbon dioxide will be produced. In order to find the amount of water produced, we need to use the law of conservation of mass. This states that the total mass of the reactants will equal the total mass of the products.

Therefore, 9.7 grams + 34.7 grams = 29.3 grams + x, where x is the mass of water produced. Solving for x, we get x = 25.7 grams of water. Therefore, 25.7 grams of water is produced when 9.7g of butane reacts with 34.7g of oxygen.

To learn more about combustion
https://brainly.com/question/13251946
#SPJ4

The action of the molecular force acting between the particles of a body or substances to bind them together is the definition of cohesion.

The term "hydrogen bond" refers to the attraction force that connects the hydrogen atoms of two molecules of the same or different substance by electronegative atoms. Three dotted lines are used to depict this relationship.

The positive end of one molecule and the negative end of the other will attract one another and weak electrostatic force will form if many of these molecules are brought closer to one another. As a result, these molecules will band together to form a molecular duster.

To know more about molecular force here

https://brainly.com/question/24139316

#SPJ4

Cohesion refers to the attractive force between similar molecules, such as the hydrogen bonds between water molecules.

In the case of water, the hydrogen bonds between water molecules create a strong force that keeps the water molecules close together. This is what allows water to form a cohesive surface, like a drop of water, and to exhibit surface tension, which is the tendency of the surface of a liquid to act as if it were a stretched elastic membrane.

The cohesion of water molecules also contributes to the high boiling point of water compared to other similar-sized molecules, such as hydrogen sulfide. This is because breaking the hydrogen bonds between water molecules requires a significant amount of energy, which must be supplied as heat in order for the water to boil.

To know more about Cohesion here

https://brainly.com/question/29598400

#SPJ4

Keeping a metal dry during heating in a test tube provides a safer and more controlled environment for conducting reactions and analyzing the results.

When heating a metal in a test tube, it is common practice to keep the metal dry rather than placing it directly into boiling water for several reasons:

Prevention of oxidation: Keeping the metal dry during heating reduces the exposure to water and atmospheric oxygen, which can cause oxidation and corrosion of the metal.

Control of reaction conditions: Heating a dry metal in a test tube allows for better control over the temperature and reaction conditions. The temperature can be monitored and adjusted more precisely than when the metal is immersed in boiling water.

Safety: Placing a metal directly into boiling water can be dangerous, as the metal can rapidly heat up and cause the water to boil over, splashing hot liquid and steam. Heating a metal in a test tube eliminates this risk.

Avoidance of dilution: When a metal is placed directly into boiling water, it can become diluted by the water, affecting the outcome of the reaction. Heating the metal in a dry test tube eliminates this risk of dilution.

Ease of observation: When a metal is heated in a dry test tube, any changes or reactions that occur can be more easily observed and monitored, as the contents of the test tube are visible.

learn more about heating here:

https://brainly.com/question/13860901

#SPJ4

The mass (g) of Ca(NO3) 2 required to prepare 125.00mL of 0.1528 M NO3- solution is 1.57g of Ca(NO3)2

V x M = mass

0.125L x 0.1528mole/L = 0.0191mole of NO3-

2 NO3-/Ca(NO3)2

then 1/2 x Ca(NO3)2 mw/ NO3-mw

and 1/2 x 0.0191mole = 0.00956 mole of Ca(NO3)2

0.00956mole x 164.0878g/mole = 1.57g of Ca(NO3)2

In chemistry, an answer is a unique kind of homogeneous aggregate composed of or more substances. In one of these combinations, a solute is a substance dissolved in another substance, known as a solvent. If the appealing forces among the solvent and solute debris are more than the appealing forces retaining the solute particles collectively, the solvent debris pulls the solute debris aside and surrounds them.

Those surrounded by solute debris then move away from the solid solute and out into the answer. the combination method of an answer takes place at a scale wherein the outcomes of chemical polarity are involved, ensuing in interactions that can be specific to solvation. the answer commonly has the state of the solvent when the solvent is the bigger fraction of the combination, as is typically the case. One essential parameter of an answer is awareness, which is the degree of the amount of solute in a given quantity of solution or solvent. The term "aqueous answer" is used when one of the solvents is water.

To learn more about Solution visit here:

brainly.com/question/1616939

#SPJ4

Complete Question:

What is the mass (g) of Ca(NO3) 2 required to prepare 125.00mL of 0.1528 M NO3- solution?

The study of reaction rates, how those rates change under various conditions, and the process by which a reaction proceeds is known as chemical kinetics. The following general characteristics can have an impact on a reaction's rate: the amount of reactants present. The rate increases with concentration.

The pace at which the products are created from the reactants in a chemical reaction is referred to as the rate of reaction. It provides some understanding of how quickly a reaction can occur. For instance, the combustion of cellulose in fire has a very high response rate and is completed in a fraction of a second.

learn more about chemical reaction

https://brainly.com/question/25769000

#SPJ1

Answer:

12.83 g.

Explanation:

At standard temperature and pressure (STP), which is defined as 0°C and 1 atm pressure, 1 mole of any gas has a volume of 22.4 liters.

Since the volume of methane gas is given as 18.00 L, we can calculate the number of moles by dividing the volume by the volume of one mole at STP:

18.00 L / 22.4 L/mol = 0.8 mol

The molar mass of CH4 is 16.04 g/mol, so we can calculate the mass of 0.8 mol of CH4 as follows:

0.8 mol * 16.04 g/mol = 12.83 g

So, the mass of 18.00 L of methane gas at STP is approximately 12.83 g.