Four regions of the electromagnetic spectrum that astronomers use when observing objects in the space are the following enumerated answers.
1. First is Ultraviolet
2. Next is Infrared
3. Then the radio
4. Lastly the Visible lights.
These are the answers to the problem.
Please help me answer the following question!
What is the momentum of a 750-kg Volkswagen Beetle when at rest?
Please give the Value and Unit
Answer:
P = 0
Explanation:
Momentum is defined as the quentity of motion contained in a body. Mathematically, it can be defined as the product of mass and velocity. So, in order to determine the Volkswagen Beetle, at rest, we can use the simple formula, as follows:
where,
P = Momentum of Volkswagen Beetle = ?
m = Mass of Volkswagen Beetle = 750 kg
v = Velocity of Volkswagen Beetle = 0 m/s (since, it is at rest)
Therefore,
P =
True or False. Isaac at first resisted his father's command to be the sacrifice.
A ball has the energy to move 30 m/s with the mass of 5. What is the energy
An accessory such as a coupling that performs a mechanical rather than an electrical function is called?
1. A roller coaster with a mass of 800 kg sits stationary at the top of a section of track, 75 m above
the ground as shown. When the brake is released, it starts to roll down the track
2. For each height represented in the diagram, calculate the gravitational potential energy using
Ep = mgh. Show ONE SAMPLE calculation in the calculations section below and fill in Table 1 for
each of the heights of the roller coaster. (6 marks)
3. Assuming there is no friction, determine the mechanical kinetic energy using Ek = Etotal - Ep.
Show ONE SAMPLE calculation in the calculations section below and fill in Table 1 for each of
the heights of the roller coaster. (6 marks)
4. For each height represented in the diagram, calculate the velocity using = �2
. Show ONE
SAMPLE calculation in the calculations section below and fill in Table 1 for each of the heights of
the roller coaster. (6 marks)
5. Use your answers to graph how gravitational potential energy, mechanical kinetic energy, and
velocity change as the roller coaster changes height. Use different colours for the three lines on
the graph. Graph paper is provided below. (3 marks)
6. Repeat steps 1 – 5 above for a roller coaster cart that has a mass of 300 kg and enter your
results in Table 2.
Calculations:
800 kg roller coaster cart:
Sample calculation for gravitational potential energy:
Sample calculation for Mechanical kinetic energy:
Sample calculation for velocity:
300 kg roller coaster cart:
Sample calculation for gravitational potential energy:
Sample calculation for mechanical kinetic energy:
Sample calculation for velocity:
Results:
Table 1: Potential energy, kinetic energy, total energy, and velocity of the 800 kg roller coaster cart
Table 2: Potential energy, kinetic energy, total energy, velocity of the 300 kg roller coaster cart.
Graphs:
It’s graphing time. These graphs are a bit different than the ones you did in the
data analysis assignment at the beginning of the course. In this case you have
three things to graph on each graph. (One graph for the 800 kg roller coaster cart
and one graph for the 300 kg roller coaster cart.) You need to graph the
gravitational potential energy with respect to height, the mechanical kinetic
energy vs height, and the velocity vs height.
Let’s look at the energy graphs first. In this case both kinetic energy and
mechanical energy cover the same range of values. This means they can use the
same scale on the y-axis. So, you will use the left y-axis and the x-axis to graph
the kinetic energy vs height and the potential energy vs height. You will need a
legend to explain which line is which. Colour coding is a nice way to highlight this.
The velocity values are much different than the energy values. This means you
need a totally different scale. So, your left y-axis won’t work. You need to make a
second scale on the right y-axis for your velocity values. You will plot the points
the same way as normal, but you will use the numbers on the right-hand scale
instead. Again, be sure to add your velocity line to the legend with a separate
colour code.
Discussion Questions:
1. Describe the relationship between the gravitational potential energy and the mechanical kinetic
energy of the roller coaster on your graph. (2 marks)
2. Describe the shapes of each of the three lines in the graph. Explain why the velocity is different.
(4 marks)
3. Describe how mass affects the speed at the bottom of the roller coaster. (2 marks)
4. Describe how mass affects the gravitational potential energy and the mechanical kinetic energy
of the roller coaster. (2 marks)
5. At what point does the roller coaster have a maximum value for the following? Justify your
answer by explaining why. (2 marks each)
a. Gravitational potential energy
b. Mechanical energy
c. Velocity
6. In your calculations, you assumed that the roller coaster was frictionless. All real roller coasters
encounter friction. Describe how the actual values of the variables would differ, or not differ,
from your calculated values for a real roller coaster. (Hint: what form of energy would some of
the total energy be converted to if there was friction in the system?) (4 marks)
How you will be graded:
Grades will be based on answering questions to demonstrate an understanding of the material covered
in this unit. Point form answers are okay if ideas are complete and use vocabulary (Word Bank)
provided. For questions out of 4 marks, there are 4 responses expected.
Answer:
Give me some hint please
Based on the calculations, potential energy of this roller coaster at a height of 75 meters is equal to 588,000 Joules.
How to calculate potential energy?Mathematically, potential energy is calculated by using this formula:
P.E = mgh
Where:
P.E represents potential energy.m is the mass.h is the height.g is acceleration due to gravity.Note: Acceleration due to gravity is equal to 9.8 m/s².
At a height of 75 m, we have:
P.E = 800 × 9.8 × 75
P.E = 588,000 Joules.
At a height of 60 m, we have:
P.E = 800 × 9.8 × 60
P.E = 470,400 Joules.
At a height of 45 m, we have:
P.E = 800 × 9.8 × 45
P.E = 352,800 Joules.
At a height of 30 m, we have:
P.E = 800 × 9.8 × 30
P.E = 235,200 Joules.
At a height of 15 m, we have:
P.E = 800 × 9.8 × 15
P.E = 117,600 Joules.
In conclusion, we can deduce that the potential energy of this roller coaster decreases with a decrease in height.
Read more on potential energy here: https://brainly.com/question/1242059
#SPJ2
URGENTLY NEED HELP
This is a 2 part question
42) You pull downward with a force of 28 N on a rope that passes over a disk-shaped pulley of mass 1.2 kg and radius 0.075 m. The other end of the rope is attached to a 0.67-kg mass. (a) Is the tension in the rope the same on both sides of the pulley? If not, which side has the greater tension? (b) Find the tension in the rope on both sides of the pulley.
Answer:
The net force on the hanging mass is thus
2 T Mg 18 6.6 N 11.4 N
, enough to accelerate it upward at
17 m/s2
. The angular acceleration of the pulley is thus
2 2
Explanation:
The tension in the rope on both sides of the pulley 20.21N.
To solve this problem, we'll need to consider the forces acting on both sides of the pulley and apply Newton's second law of motion. Let's break it down step by step:
(a) Is the tension in the rope the same on both sides of the pulley?
No, the tension in the rope is not the same on both sides of the pulley. The side with the greater mass attached will experience a greater tension in the rope.
(b) Find the tension in the rope on both sides of the pulley:
Calculate the gravitational force on each mass:
Gravitational force on the pulley: Fpulley = mpulley * g, where mpulley is the mass of the pulley and g is the acceleration due to gravity (approximately 9.8 m/s²).
Gravitational force on the hanging mass: Fhanging = mhanging * g, where m_hanging is the mass of the hanging mass.
Calculate the net force on the pulley:
Net force on the pulley is the difference between the tension forces on either side: Fnet = TLeft - Tright.
Apply Newton's second law to the pulley:
For the pulley, Fnet = mpulley * a, where a is the acceleration of the pulley. Since the pulley is assumed to be massless, we can use the relationship a = α * r, where α is the angular acceleration and r is the radius of the pulley.
Use the relationship between linear acceleration and angular acceleration:
α = a / r.
Equate the torque due to the tension to the moment of inertia times the angular acceleration:
τ = I * α, where τ is the torque, I is the moment of inertia of the pulley, and α is the angular acceleration.
Substitute the expression for α and solve for the net tension:
Tnet = (τ / r) = (I * α) / r = (1/2 * mpulley * r² * α) / r = (1/2 * mpulley * r * a).
Now, substitute the expression for a from step 3 and solve for the net tension:
Tnet = (1/2 * mpulley * r * α) = (1/2 * mpulley * r * (a / r)) = (1/2 * mpulley * a).
Substitute the expression for a from step 2 (Fnet = mpulley * a) and solve for the net tension:
Tnet = (1/2 * Fnet).
Now, you can find the tensions on each side of the pulley:
Tleft = Tnet + Fhanging
Tright = Tnet - Fpulle
To know more about tension
https://brainly.com/question/16943376
#SPJ2
PLEASE HELP ASAP
I need help understanding this question, form my guess I’m thinking it’s C but I’m not to sure
Answer:
Explanation:
Without the diagram, we have to bracket our answers.
Total energy is constant, so we eliminate options A and B.
C is correct if position 1 is closer to the star than position 2
D is correct if position 2 is closer to the star than position 1
when a student comned his dry hair for a long time, his hair began to stand up. Which of these has MOST LIKELY happened
His hair got charged due to continuous friction causing them to get attracted to other objects and thus standing up.
Answer:The comb and hair have become charged with opposite charges.
Explanation:When a comb is run through your hair charges pass between your hair and the comb, so the comb becomes charged either positively or negatively, and the hair oppositely charged. When the comb is brought close to paper an opposite charge is induced in the paper, and the opposite charges attract.
A 4.0 kilogram projectile is fired horizontally from a 500 kilogram cannon initially at rest. The momentum of the projectile after being fired is 600 kilogram-meters per second to the north
(neglecting friction).
What is the speed of the cannon after firing?
0.83 m/s
1.2 m/s
o
3.3 m/s
150 m/s
The speed of the cannon after firing is 1.2 m/s
This can be solved using the law of conservation of momentum.
From the law of conservation of momentum,
⇒ The momentum of the projectile is equal to the momentum of the cannon.
MV = P................ Equation 1⇒ Where :
M = mass of the cannon,V = velocity of the cannonP = momentum of the projectile.⇒ make V the subject of the equation
V = P/M.................. Equation 2From the question,
⇒ Given:
P = 600 kgm/sM = 500 kg⇒ Substitute these values into equation 2
V = 600/500V = 1.2 m/sHence, The speed of the cannon after firing is 1.2 m/s
Learn more about momentum here: https://brainly.com/question/14015797
Andy Petite pitches a 0.8 kg baseball with a velocity of 67 m/s. Josh Hamilton
hits the ball back at a velocity of -44 m/s. Determine the impulse Josh
Hamilton's bat delivered to the baseball and enter to the nearest kg-m/s with
the correct sign.
The Impulse delivered to the baseball is 89 kgm/s.
To solve the problem above, we use the formula of impulse.
⇒ Formula:
I = m(v-u)................. Equation 1Where:
I = Impulse delivered to the baseballm = mass of the baseballv = Final velocity of the baseballu = initial speed of the baseballFrom the question,
⇒ Given:
m = 0.8 kgu = 67 m/sv = -44 m/s⇒ Substitute these values into equation 1
I = 0.8(-44-67)I = 0.8(-111)I = -88.8I ≈ -89 kgm/sNote: The negative tells that the impulse is in the same direction as the final velocity and therefore can be ignored.
Hence, The Impulse delivered to the baseball is 89 kgm/s.
Learn more about impulse here: https://brainly.com/question/7973509
As a truck rounds a curve, a box in the bed of the truck slides to the side farthest from the center of the curve. This movement of the box is a result of
Answer:
inertia
Explanation:
the mass of the box will want to continue on its straight line motion.
As centripetal force on the wheel treads causes the truck to turn, frictional force between the box and truck bed is insufficient to keep the box turning at the same rate that the truck turns, so relative velocity occurs between box and bed until the centripetal force is increased by contact with the truck side wall farthest from the center of curvature.
Write down the condition required for the thermonuclear fusion.
Answer:
The main condition necessary for a controlled thermonuclear fusion:
The ions must be held together in close proximity at high temperature with a confinement time long enough to avoid cooling.
A rifle is aimed horizontally at a target 47 m away. The bullet hits the target 2.3 cm below the aim point.
Answer:
Is your question asking for the muzzle velocity of the bullet?
Explanation:
I will assume it does
The bullet travels horizontally to the target in the same amount of time it falls 2.3 cm from vertical rest
s = ½at²
t = √(2s/g) = √(2(0.023) / 9.8) = 0.0685118...s
v = d/t = 47/0.0685118 = 686.01242...
v = 690 m/s
A crane is lifting a 500 lb piano with a velocity of 2fts''. Express the power of the crane in hp. (1 hp = 550ft-lbs)
Answer:
goalindia
goalindiaGiven:
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kg
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 W
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg⇒ v = 1357.72/(226.8 × 9.8)
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg⇒ v = 1357.72/(226.8 × 9.8)⇒ v = 1357.72/2222.64
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg⇒ v = 1357.72/(226.8 × 9.8)⇒ v = 1357.72/2222.64⇒ v = 0.61 m/s
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg⇒ v = 1357.72/(226.8 × 9.8)⇒ v = 1357.72/2222.64⇒ v = 0.61 m/s- So, the velocity of the car will be 0.61❤
23 A 2-kg rock is moving at a speed 6 m/s, What constant force is needed to stop the rock in 7x10-52
Answer:
Explanation:
Do you mean 7 x 10⁻⁵² seconds? Who can even measure that small a time period?
If that time is incorrect, just redo the math with the correct time to get the force.
An impulse will cause a change of momentum
FΔt = mΔv
F = mΔv/Δt
F = 2(0 - 6)) / (7 x 10⁻⁵² - 0)
F = - 1.7 x 10⁵² N
The magnitude of that force would pretty much crush any rock it hit.
The ability to do work and cause change is called
Answer:
I am pretty sure it is called energy.
which alkali metal is most reactive
objects want to ______ ___________ doing what they're __________ ____________ because they are "lazy." This is called __________.
Answer:
Explanation:
Objects want to continue doing what they're already doing because they are "lazy." This is called inertia.
A constant force of 12 N in the positive x direction acts on a 4.0-kg object as it moves from the origin to the point 6i-8j m. How much work is done by the given force during this displacement
Answer:
Explanation:
Only force in the direction of motion does work
The force acts in the x direction
The x change of position was 6 m
W = Fd = 12(6) = 72 J
The work done by the given force during this displacement is determined as 120 J.
Work done on the objectThe work done on the object is calculated as follows;
W = Fd
where;
d is the displacement of the objectd = √(6² + 8²)
d = 10 m
W = 12 x 10
W = 120 J
Learn more about work done here: https://brainly.com/question/25573309
#SPJ6
the driver of a 2.0 × 10³ kg red car traveling on the highway at 45m/s slams on his brakes to avoid striking a second yellow car in front of him, which had come to of because locking ahead.After the brakes are applied a constant friction force of 7.5 × 10³ N acts on the car ignore air resistance.
a₎ Determine the least distance should the brakes be applied to avoid a collision with the other vehicle?
Answer:
Explanation:
a = F/m = 7500/2000 = 3.75 m/s²
v² = u² + 2as
s = (v² - u²) / 2a
s = (0² - 45²) / (2(-3.75))
s = 270 m
Two positive charges of 1 mC and 10 mC are separated by a distance of 10 m. Find the
direction and the magnitude of electrostatic force between the charges. |Describe the
direction in terms of the charges attract each other," or "the charges repel each other."
mili C=1043 C
Answer:
900N, charges repel
Explanation:
F = KQq/d²
K = 9 × 10^9Nm²/C²
Q= 10mC = 10 × 10^-3C
q = 1mc = 1 × 10^-3C
d = 10m
F = ?
Force = (9 × 10^9 × 10 × 10^-3 × 1 × 10^-3)/10²
= 9 × 10²
= 900N
It will be an electrostatic force of repulsion since like charges(two positive charges) repel
The magnitude and the direction of the electrostatic force between the charges will be 900N and the charges will repel each other.
What is Coulomb's law of forces?Coulomb's law states that whenever the two charged particles are separated by a particular distance then there will be a force of attraction or repulsion acts between the charge.
The formula of coulomb's force will be given by
[tex]F=k\dfrac{q_1q_2}{d^2}[/tex]
[tex]K=9\times 10^9\ \frac{Nm^2}{C^2}[/tex]
[tex]q_1= 10\times 10^{-3}\ C[/tex]
[tex]q_2=1\times 10^{-3}\ C[/tex]
[tex]\rm Distance \ d=10 \ m[/tex]
Now the force will be calculated as
[tex]F=(9\times 10^9)\dfrac{(10\times 10^{-3})\times (1\times 10^{-3})}{10}[/tex]
[tex]F= 900\ N[/tex]
The charges are positive in nature so they will repel each other
Hence the magnitude and the direction of the electrostatic force between the charges will be 900N and the charges will repel each other.
To know more about coulomb's law follow
https://brainly.com/question/506926
Someone help me please !!!! Will mark Brianliest !!!!!!!!!!!!!!!!
Blonde hair is produced by inheriting double recessive alleles (bb) from one’s parents. What is the probability of their offspring having blonde hair?
plz help
Answer:
over 50% power ability
Explanation:
I believe it's half and half chance that The Offspring or the child will have that trait
If a rocket experiences an acceleration generated by the gravity force between the earth and itself, what is this acceleration if the rocket flies 1000 km above the ground and the Earth's radius is 6.378 * 10 ^ 6 * r m. We know the Earth has a mass of 5.97*10^ 24 kg(in m/s^ 2 , G=6.67*10^ -11 N(m/kg)^ 2 ) ?
a 8.97
b 7.32
c 9.81
d 5.5
e 11.45
This question involves the concepts of Gravitational Force and Weight force.
The value of acceleration is "b. 7.32 m/s²".
At the given height the weight of the rocket must be equal to the gravitational force between rocket and the Earth:
[tex]W=F_G\\mg=\frac{GmM}{R^2}\\\\g=\frac{GM}{R^2}[/tex]
where,
g = acceleration = ?
G = universal gravitational constant = 6.67 x 10⁻¹¹ N.m²/kg²
M = mass of earth = 5.97 x 10²⁴ kg
R = Radius of Earth + Height = 6.378 x 10⁶ m + 1 x 10⁶ m = 7.378 x 10⁶ m
Therefore,
[tex]g=\frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(5.97\ x\ 10^{24}\ kg)}{(7.378\ x\ 10^6\ m)^2}[/tex]
g = 7.32 m/s²
Learn more about the gravitational force here:
https://brainly.com/question/24783651?referrer=searchResults
explain the different conditions that can result in hot and cold lahars, and explain how lahars change the earth's surface?
Would you die if you take the car keys out of the ignition and throw them in the back seat while you coast down a mountain-side in an attempt to save fuel and look cool for the girl in said back seat.
Answer:
bro what.
Explanation:
... is this an actual physics question?
True or False. Father of a multitude" obeyed God's command to kill His son because the Ten Commandments had not yet been given.
Answer:
Explanation:
He agreed to the command, because it was God who proposed it. The story is supposed to make a comment on faith. Abraham had faith that somehow God would make everything right. The Ten commandments came later, but really had nothing to do with Abraham's decision.
True.
What is the significance of Isaac's name? What is the significance of Isaac's name?
Answer:
Isaac is one of the three patriarchs of the Israelites and is an important figure in the Abrahamic religions, including Judaism, Christianity, and Islam. Isaac's name means "he will laugh", reflecting the laughter, in disbelief, of Abraham and Sarah, when told by God that they would have a child.Hope this helps !!Explanation:
Itz Deepika Here to help ~ .
Note:- If you have more questions then let me know !!
Someone help me please !!!! Will mark Brianliest !!!!!!!!!!!!!!!!
Answer:
Decant it.
Explanation:
Pour the water/sugar solution off the sand. When the sand wants to start coming out as well, Stop and add fresh water to the beaker, stir to rinse the remaining solution into a less concentrated solution and decant again.
Repeat the dilution process until the mix is essentially sand and water, then drive the remaining water from the sand by drying.
Two moles of an ideal monatomic gas go through the cycle abc. For the complete cycle, 800 J of heat flows out of the gas. Process ab is at constant pressure, and process bc is at constant volume. States a and b have temperatures Ta = 200 K and Tb = 300 K.
(a) Sketch the all possible pV-diagrarns for the cycle.
(b) What is the work W for the process ca?
a) Sketches of all possible pv-diagrams for the cycle are attached below
b) The work W[tex]_{ac}[/tex] for the process Ca is : 2462.8 J
Given data :
Amount of heat flowing out = 800 J
Ta = 200 K
Tb = 300 K
R = 800
B) Determine the work W for the process Ca
Wₐs = -pdv
= - [ pVb - pVa ] ---- ( 1 )
note : pVb = nRTb , pVa = nRTa
Equation ( 1 ) becomes
= -nR [ Tb - Ta ]
= - 2(8.314 ) [ 300 - 200 ]
= - 1662.87
given that W[tex]_{bs}[/tex] = 0 which is isochonic
dv = 0 ( cyclic process ) = d∅ - dw
∴ 0 = 800 - ( Wₐs + W[tex]_{ac}[/tex] )
Therefore : W[tex]_{ac}[/tex] = 800 + 1662.8 = 2462.8 J
Hence we can conclude that the work W for the process Ca = 2462.8 J
Learn more about Pv diagrams : https://brainly.com/question/25401637