IA body starts to move from rest and travels with uniform acceleration of 7mls2. How far will the body move in 4 second .​

Answer:

The altitude of the plane is 379.5 m.

Explanation:

Initial horizontal velocity, u = 59.1 m/s

Horizontal distance, d = 521 m

let the time taken by the packet to cover the distance is t.

Horizontal distance = horizontal velocity x time

521 = 59.1 x t

t = 8.8 s

let the vertical height is h .

Use second equation of motion in vertical direction.

[tex]h = u t + 0.5 gt^2\\\\h = 0 + 4.9 \times 8.8\times8.8\\\\h= 379.5 m[/tex]

Answer:

Jo

Explanation:

irradiating food doesn't make it radioactive (that's contamination) and beta particles are stopped by aluminium foil or thin metals, so it may not pass through thick packaging (usually gamma is used to irradiate foods as it can pass through the packaging)

Answer:

Explanation:

The formula for centripetal acceleration is

[tex]a_c=\frac{v^2}{r}[/tex] and filling in:

[tex]11.3=\frac{(30.0)^2}{r}[/tex] and solving for r:

[tex]r=\frac{(30.0)^2}{11.3}[/tex] gives us that

r = 79.6 m

Answer:

The second throw shows both accuracy and precision.

Explanation:

The second throw shows both accuracy and precision because he knew in which degree and the amount of force that can be applied to the dart so that it hits the center of the bullseye or close to it. Due to knowing of these two things the Carlos is able to hit the dart close to the target at the second time so in this way he got both accuracy and precision at the second turn of throwing darts.

Answer:

B-The second throw shows accuracy but poor precision.

Explanation:

Answer 60 NEWTON

Explanation:

FORCE = MASS * acceleration

acceleration= VELOCITY / TIME

acceleration= 30 / 10 = 3   M/S2

FORCE = MASS * acceleration

FORCE = 20 *3 = 60 NEWTON

Answer:

Time, t = 4.165 seconds.

Explanation:

Given the following data;

Initial velocity = 60 km/h

Final velocity = 90 km/h

Acceleration = 2 m/s²

Conversion:

60 km/hr to meters per seconds = 60*1000/3600 = 60000/3600 = 16.67 m/s

90 km/hr to meters per seconds = 90*1000/3600 = 90000/3600 = 25 m/s

To find the time, we would use the first equation of motion;

[tex] V = U + at[/tex]

Where;

V is the final velocity.

U is the initial velocity.

a is the acceleration.

t is the time measured in seconds.

Making time, t the subject of formula, we have;

[tex] t = \frac{V - U}{a}[/tex]

Substituting into the equation, we have;

[tex] t = \frac{25 - 16.67}{2}[/tex]

[tex] t = \frac{8.33}{2}[/tex]

Time, t = 4.165 seconds.

Answer:

Explanation:

If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.

Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.

The end of the road is 40m and coming back is also 40 m. The total distance is:

= 40 + 40

= 80m

The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.

Find out more uses of distance-time graphs at https://brainly.com/question/13877898.

#SPJ6

"Satellite technology allows us to monitor and track the changes in the polar ice sheets. This can help us plan and direct conservation efforts for the animals that depend on polar ice in order to survive."

This is the answer because the other answers don't really tackle helping the environment head-on instead it sorta helps society instead. Since we are looking for the ways satellite tech can help the environment and the polar ice caps is a wonderful example of that...we can conclude that the third answer will most likely be the correct answer for this question

Hope this helped you!!!! :)

Answer:

b. they move in convection currents.

Explanation:

i learned this in 4th grade

Solution :

When the spacecraft is at halfway point, the distance from the Earth as well as Mars are same. We have to account the masses of the planets. The gravitational force that is exerted by the Earth is greater because of its combined mass with the space probe.

The mass of Earth is greater than the mass of Mars. Therefore, the force of Earth is more than Mars.

Answer:

The answer is 30 min

Explanation:

t = s/v

v = 70 m/min, s = 2100 m

t = 2100/70 = 30 min.

Hope it helps you! ＼(^ᴥ^)／

Answer:

The Mars appears in the direction of South.

Explanation:

Mars is rising in the east at 6: 30 PM. The period of rotation of earth is 24 hours.

So, 6 hours is the one fourth of the period of rotation of earth. Earth rotates counter clockwise on its axis, so after 6 hours, we see the Mars in the direction of South.

Answer:

  [tex]M = \left[\begin{array}{ccc}cos \ 60&0\\0&-sin \ 60\end{array}\right][/tex]

Explanation:

To find the matrix, let's decompose the vectors, the rotated angle is (-60C) for the prime system

          x ’= x cos (-60)

          y ’= y sin (-60)

we use

          cos 60 = cos (-60)

          sin 60 = - sin (-60)

we substitute

          x ’= x cos 60

          y ’= - y sin 60

the transformation system is

         [tex]\left[\begin{array}{ccc}x'\\y'\end{array}\right] = \left[\begin{array}{ccc}cos 60&0\\0&-sin60\end{array}\right] \ \left[\begin{array}{ccc}x\\y\end{array}\right][/tex]x '

the transformation matrix is

       [tex]M = \left[\begin{array}{ccc}cos \ 60&0\\0&-sin \ 60\end{array}\right][/tex]

Answer:

1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.

2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.

3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.

4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.

5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.

6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.

7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.

8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.

9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.

10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.

11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.

12) Quemar basura - Cambio químico - Reacción de combustión.

Explanation:

A continuación, veremos que representa cada caso:

1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.

2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.

3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.

4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.

5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.

6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.

7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.

8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.

9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.

10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.

11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.

12) Quemar basura - Cambio químico - Reacción de combustión.

Answer:

4V

Explanation:

First, we calculate the total resistance to the given battery cell of emf 5V. The total resistance is the sum of all the resistance in the cell i.e.

Total resistance = 2Ω + 8Ω = 10Ω

Using ohms law equation to calculate the current passing through the battery cell:

V = IR

Where; V = voltage, I = current, R = resistance

5V = I × 10Ω

I = 5/10

I = 0.5A

Terminal voltage is calculated by the us of the following equation:

V=emf−IR

Where; R is internal resistance

V = 5 - (0.5 × 2)

V = 5 - 1

V = 4V

Therefore, the potential difference across the terminals of the battery cell is 4V

Answer:

B. seafloor spreading

Explanation:

divergent motion between the Eurasian and North American, and African and South American Plates. ... In this way, as the plates move further apart new ocean lithosphere is formed at the ridge and the ocean basin gets wider

geological society

[tex] \green{\huge{\red{\boxed{\green{\mathfrak{QUESTION}}}}}} [/tex]

Define Circular motion and its types

[tex] \huge\green{\boxed{\huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}}}[/tex]

[tex]{ \red{ \bold {\mathbb {\textit{Circular \: motion}}}}}[/tex]

MOTION OF THE BODY CIRCULAR PATH IS CALLED CIRCULAR MOTION

[tex]{ \blue {\bold{UNIFORM \: CIRCULAR}}} \\ \green{ \bold{ MOTION}}[/tex]

[tex] { \green{ \bold{ NON UNIFORM}}} \\ {\blue{ \bold{CIRCULAR \: MOTION}}}[/tex]

Answer:

The field is parallel to the direction of flow of the current.

Answer:

a. i. 6.608 V ii. 5.507 V iii. 1.89 V iv. 1.89 V

b. i. 0.22 mJ ii. 0.182 mJ iii. 0.027 mJ iv. 0.036 mJ

Explanation:

a. The voltage across each capacitor

Since the 15 μf and 20 μf capacitors are in parallel, their total capacitance is C = 15 μf + 20 μf = 35 μf.

Also, since C is in series with the 10 μf and 12 μf which are in series, their total capacitance, C' is gotten from 1/C' = 1/10 μf + 1/12 μf + 1/35 μf  

1/C' = (12 + 42 + 35)/420 /μf

1/C' = 89/420 /μf

C' = 420/89 μf

C' = 4.72 μf

The total charge in the circuit' is thus Q = C'V where V = voltage = 14 V

So, Q = C'V =  4.72 μf × 14 V = 66.08 μC

Since the 10 μf and 12 μf are in series, Q is the charge flowing through them.

Since Q = CV and V = Q/C

i. The voltage across the 10 capacitor is

V = 66.08 μC/10 μF = 6.608 V

ii. The voltage across the 12 capacitor is

V = 66.08 μC/12 μF = 5.507 V

The voltage across the 15 μF and 20 μF capacitors.

Since the capacitors are in parallel, the voltage across them is the voltage across their combined capacitance, C

So, V = Q/C = 66.08 μC/35 μF = 1.89 V

iii. The voltage across the 15 μF capacitor is 1.89 V

iv. The voltage across the 20 μF capacitor is 1.89 V

b. The potential energy of each capacitor

i. The potential energy of the 10 μF capacitor

E = 1/2CV² where C = Capacitance = 10 μF = 10 × 10⁻⁶ F and V = voltage across capacitor = 6.608 V

E = 1/2CV²

E = 1/2 × 10 × 10⁻⁶ F(6.608 V)²

E = 5 × 10⁻⁶ F(43.666) V²

E = 218.33 × 10⁻⁶ J

E = 0.21833 × 10⁻³ J

E = 0.21833 mJ

E ≅ 0.22 mJ

ii. The potential energy of the 12 μF capacitor

E = 1/2CV² where C = Capacitance = 12 μF = 12 × 10⁻⁶ F and V = voltage across capacitor = 5.507 V

E = 1/2CV²

E = 1/2 × 12 × 10⁻⁶ F(5.507 V)²

E = 6 × 10⁻⁶ F(30.327) V²

E = 181.96 × 10⁻⁶ J

E = 0.18196 × 10⁻³ J

E = 0.18196 mJ

E ≅ 0.182 mJ

iii. The potential energy of the 15 μF capacitor

E = 1/2CV² where C = Capacitance = 15 μF = 15 × 10⁻⁶ F and V = voltage across capacitor = 1.89 V

E = 1/2CV²

E = 1/2 × 15 × 10⁻⁶ F(1.89 V)²

E = 7.5 × 10⁻⁶ F(3.5721) V²

E = 26.79 × 10⁻⁶ J

E = 0.02679 × 10⁻³ J

E = 0.02679 mJ

E ≅ 0.027 mJ

iv. The potential energy of the 15 μF capacitor

E = 1/2CV² where C = Capacitance = 20 μF = 15 × 10⁻⁶ F and V = voltage across capacitor = 1.89 V

E = 1/2CV²

E = 1/2 × 20 × 10⁻⁶ F(1.89 V)²

E = 10 × 10⁻⁶ F(3.5721) V²

E = 35.721 × 10⁻⁶ J

E = 0.035721 × 10⁻³ J

E = 0.035721 mJ

E ≅ 0.036 mJ

Answer:

Explanation:

[tex]KE=\frac{1}{2}mv^2[/tex] so filling in:

[tex]KE=\frac{1}{2}(1000)(30)^2[/tex] so to 2 sig figs (which is actually not accurate, but oh well...)

KE = 450000 J

If we want to find out how high it will have to travel up a hill so that its PE is the same as the KE at this speed, we set the value for KE = to PE:

450000 = (1000)(9.8)h so

[tex]h=\frac{450000}{(1000)(9.8)}=45.9m[/tex]

9514 1404 393

Answer:

  A1 = 3A, A2 = 1.5A

  Effective resistance = 2Ω

Explanation:

When the switch is closed, the voltage across each resistor is 6V, so the current through it (A2) is ...

  A2 = 6V/(4Ω) = 1.5A

There are two parallel paths, each with that current, so the current from the battery is ...

  A1 = A2 +A2 = 1.5A +1.5A = 3.0A

Then the effective resistance is ...

  Reff = 6V/(3.0A) = 2.0Ω

The solution to the circuit is ...

  A1 = 3A, A2 = 1.5A

  Effective resistance = 2Ω

Answer:

C. Basic research provides fundamental knowledge that can be used to conduct applied research.

Explanation:

Applied research is used to solve practical and specific problems. Basic research is used to advance theories and scientific knowledge; it might not result in an invention or a solution, but can be used to gain knowledge about a specific subject.

Answer:

what if I do and b then someone else c I don't have enough time pls

Answer:

Explanation:

When the spring is compressed, it is compressed to its amplitude (whereas equilibrium is the spring's natural length with no mass attached to it and displacement is the spring's reaction to a mass hung on the end of it without any "extra" pushing or pulling on the mass). It is at the amplitude where the spring experineces max potential energy, which is choice 2, E = mph

Answer:

its c

Explanation:

...

Answer:

If the mass of the Earth is increased by a factor of 2, then the Fgrav is increased by a factor of 2.

If the mass of the earth is increased by a factor of 3, then Fgrav is increased by a factor of 3.

If the mass of the earth is decreased by a factor of 4, then the Fgrav is decreased by a factor of 4

Explanation:

In order to solve this question, we must take into account that the force of gravity is given by the following formula:

[tex]F_{g0}=G \frac{mM_{E0}}{r^{2}}[/tex]

So if the mass of the earth is increased by a factor of 2, this means that:

[tex]M_{Ef}=2M_{E0}[/tex]

so:

[tex]F_{gf}=G \frac{2mM_{E0}}{r^{2}}[/tex]

Therefore:

[tex]\frac{F_{gf}}{F_{g0}}=\frac{G \frac{2mM_{E0}}{r^{2}}}{G \frac{mM_{E0}}{r^{2}}}[/tex]

When simplifying we end up with:

[tex]\frac{F_{gf}}{F_{g0}}=2[/tex]

so if the mass of the Earth is increased by a factor of 2, then the Fgrav is increased by a factor of 2.

If the mass of the earth is increased by a factor of 3

So if the mass of the earth is increased by a factor of 2, this means that:

[tex]M_{Ef}=3M_{E0}[/tex]

so:

[tex]F_{gf}=G \frac{3mM_{E0}}{r^{2}}[/tex]

Therefore:

[tex]\frac{F_{gf}}{F_{g0}}=\frac{G \frac{3mM_{E0}}{r^{2}}}{G \frac{mM_{E0}}{r^{2}}}[/tex]

When simplifying we end up with:

[tex]\frac{F_{gf}}{F_{g0}}=3[/tex]

so if the mass of the Earth is increased by a factor of 3, then the Fgrav is increased by a factor of 3.

If the mass of the earth is decreased by a factor of 4

So if the mass of the earth is decreased by a factor of 4, this means that:

[tex]M_{Ef}=\frac{M_{E0}}{4}[/tex]

so:

[tex]F_{gf}=G \frac{mM_{E0}}{4r^{2}}[/tex]

Therefore:

[tex]\frac{F_{gf}}{F_{g0}}=\frac{G \frac{mM_{E0}}{4r^{2}}}{G \frac{mM_{E0}}{r^{2}}}[/tex]

When simplifying we end up with:

[tex]\frac{F_{gf}}{F_{g0}}=\frac{1}{4}[/tex]

so if the mass of the Earth is decreased by a factor of 4, then the Fgrav is decreased by a factor of 4.

Answer:

The ray box used as the source of light

Answer: its A

Explanation: i just did the test and got it right also known. The ray used as the source of light

Answer:

Blood alcohol content (BAC) is a measure of the amount of alcohol that is present in the blood.

A heavier person will have a lower blood alcohol level due to a greater amount of water in their body. The more a person weighs, the more water he/she tends to have in his/her body. The water has a diluting effect on the alcohol so the BAC will be lower in comparison with a person who is slimmer  and has less water in the body.

Explanation:

Answer:

First Condition of Equilibrium

For an object to be in equilibrium, it must be experiencing no acceleration. This means that both the net force and the net torque on the object must be zero. Here we will discuss the first condition, that of zero net force. ... Fnet=0 F net = 0.

Answer:

A chemical change has taken place to form nitric oxide.

Explanation:

Answer:

A solenoid is a type of electromagnet, the purpose of which is to generate a controlled magnetic field through a coil wound into a tightly packed helix. The coil can be arranged to produce a uniform magnetic field in a volume of space when an electric current is passed through it.