hydrates (1 question)

Sublevels are indicated by letters s, p, d, and f.

How do write Electronic configuration?

Electron configurations have a standard notation that tells you the principle energy levels and sublevels that electrons occupy. here is Sulphur:

The atomic number of Sulphur is 16.

the electronic configuration of Sulphur is 1s2 2s2 2p6 3s2 3p4.

The 4s sublevel has lower energy than the 3d sublevel,

so, it fills next.

One orbital can house a maximum of two electrons, and there are four different types of orbitals (s, p, d, and f). More electrons can be held in the p, d, and f orbitals since they contain various sublevels. According to its location on the periodic table, each element's electron configuration is distinct.

To know more electron confirguration here:

brainly.com/question/18566828

#SPJ1

Answer:

Explanation:

Given pinene has a (temperature, vapor pressure) relation (K, torr) = {(373, 135), (429, 760)}, you want the heat of vaporization in kJ/mol and the vapor pressure at room temperature (23 °C).

The Clausius–Clapeyron equation can be used to find the heat of vaporization:

  [tex]\ln{P}=-\dfrac{\Delta H_{\text{vap}}}{R}\left(\dfrac{1}{T}\right)+C[/tex]

Solving for ∆H, we find ...

  [tex]\Delta H_{\text{vap}}=-\dfrac{R\cdot\ln{\dfrac{P_1}{P_2}}}{\dfrac{1}{T_1}-\dfrac{1}{T_2}}\\\\\\\Delta H_{\text{vap}}=-\dfrac{8.314\cdot\ln{\dfrac{760}{135}}}{\dfrac{1}{429}-\dfrac{1}{373}}\approx 41052.8[/tex]

The heat of vaporization of pinene is about 41 kJ/mol.

Rearranging the above equation to give P1, we have ...

  [tex]\ln{\dfrac{P_1}{P_2}}=-\dfrac{\Delta H_\text{vap}}{R}\left(\dfrac{1}{T_1}-\dfrac{1}{T_2}\right) \\\\\\P_1=P_2\cdot e^{-\frac{\Delta H_\text{vap}}{R}\left(T_1^{-1}-T_2^{-1})}[/tex]

Using the same P2 and T2 as above, we find the vapor pressure at room temperature (296.15 K) to be ...

  P1 ≈ 4.349 . . . . . torr

The vapor pressure of pinene at room temperature is about 4 torr.

The depression in freezing point of the electrolyte is 1.6 K. The weight of the solute added is 29.5 g. Then the molar mass of the compound is obtained to be 342.93 g/mol.

Addition of a non-volatile solute into a solvent decreases the freezing point of the solution. The depression in freezing point is calculated as follows:

ΔT =  W₂ 1000 Kf / (M W₁)

where W₂ be the mass of solute and W₁ is that of solvent, Kf is called molal depression constant. M be the molar mass of the solute.

Given ΔT = 1.6 K

W₂  = 29.5 g

W₁ = 100 g

Kf of water = 1.86 K/m

Then M = W₂ 1000 Kf / ( ΔT W₁)

M = 29.5 g× 1000 × 1.86 / (1.6 K × 100 g) = 342.9 g/mol

Thus, the molar mass of the solute is 342.9 g/mol.

Find more on depression in freezing point:

https://brainly.com/question/12844810

#SPJ1

Answer:

9 times Avogadro's number, because there are a total of 9 oxygen atoms in the copper sulfate hydrate being considered: 4 from the sulfate

Explanation:

Long-term (months or years) high blood sugar levels can cause irreversible harm to organs such the kidneys, blood vessels, eyes, nerves, and nervous system. Speak with your doctor or the diabetes care team if you frequently have hyperglycemia.

If left untreated, having excessive blood sugar levels for an extended length of time might lead to major health issues. In addition to raising the risk of heart disease, stroke, kidney illness, vision issues, and nerve issues, hyperglycemia can harm the blood arteries that provide blood to essential organs.

A high-fat, high-calorie, and high-cholesterol diet

To know more about  high blood sugar visit:-

https://brainly.com/question/29749982

#SPJ1

The mass of the compound is calculated by freezing point depression formula which is ΔTf=Kf×W₂×1000/M₂×W₁ which is equal to 3125 g.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.

Freezing point depression is calculated by the formula, ΔTf=Kf×W₂×1000/M₂×W₁ .Therefore,W₁=5.12×75×1000/0.48×256=3125 g.

Thus, mass of compound is 3125 g.

Learn more about compound,here:

https://brainly.com/question/13516179

#SPJ1

Answer:

The ion-electron method involves breaking the reactants into their component ions and transferring electrons between the ions to balance the charge and the atoms. In a basic solution, the S²⁰⁸² ion will gain two electrons to form SO₂. The I¹⁻ ion will lose one electron to form I³⁻. The balanced redox equation using the ion-electron method is:

S²⁰⁸² + 2e⁻ + 2OH⁻ → SO₂ + H₂O

I¹⁻ + e⁻ → I³⁻

The overall balanced equation is:

2S²⁰⁸² + 2OH⁻ + I¹⁻ → 2I³⁻ + SO₂ + H₂O

If the volume of the balloon was 4.21L when the temperature was 25.0°C, 8.42L will be the volume of the balloon be when the temperature is 50.0°C. if Mass and pressure is constant.

Hence, in the above case it is shown that temperature is rising twice of its original value so, the volume of that given mass of gas in the balloon will also increase by twice.

Solution:

4.21L=25.0°C

4.21L×2=50.0°C

8.42L=50.0°C

8.42L will be the volume of the balloon be when the temperature is 50.0°C.

To know more about volume visit

https://brainly.com/question/12050285

#SPJ1

Answer: A balanced chemical reaction is A balanced chemical equation where the number of atoms of each type in the response is the same on both reactants and product sides.

Explanation: Burning, and cooking are 2 examples.

To solve this we must be knowing each and every concept related to tautomerization. Therefore, out of keto and enol form, keto form is mot stable.

Tautomers are two structural isomers that are readily inconvertible and vary in the relative locations of their atoms while being in dynamic equilibrium. Tautomers essentially function as structural isomers.

Tautomerization is the term used to describe the tautomerization phenomena. Tautomerization includes the exchange of protons and electrons between molecules. Out of keto and enol form, keto form is mot stable.

Therefore, out of keto and enol form, keto form is mot stable.

To learn more about tautomerization, here:

https://brainly.com/question/15411301

#SPJ1

They are distinct Similarity: Compared to crustal rocks, mantle rocks have higher concentrations of magnesium and iron. The deep mantle's rocks are under extreme pressure and heat.

Earth's interior is made up primarily of the mantle, which is solid. Between the thin crust at the surface of the planet and its dense, extremely hot core is the mantle. A staggering 84% of the volume of the Earth is made up of the mantle, which is around 2,900 kilometers 1,802 miles thick.

The thickest layer on Earth measures just under 3,000 kilometers 1,865 miles. The beginning is only 18.6 miles 30 kilometers below the surface. It is thick, heated, and semi-solid like caramel candy, mostly made of iron, magnesium, and silicon. It circulates, much like the layer beneath it.

To know more about mantle visit:

https://brainly.com/question/11096614

#SPJ1

The pH value of 500 mL of an aqueous solution of 0.005 mole HCl is 2

We'll begin our calculations by obtaining the molarity of the solution. Details below:

Molarity = mole / volume

Molarity = 0.005 / 0.50

Molarity = 0.01 M

Next, we shall obtain the concentration of the hydrogen ion, H⁺ in the solution. Details below:

HCl(aq) <=> H⁺(aq) + Cl¯(aq)

From the balanced equation above,

1 mole of HCl contains 1 mole of H⁺

Therefore,

0.01 M HCl will also contain 0.01 M H⁺

Thus, the concentration of the hydrogen ion, H⁺ in the solution is 0.01 M

Finally, we shall determine the pH of the solution. Details below:

pH = -Log H⁺

pH = -Log 0.01

pH = 2

Thus, we can conclude that the pH of the solution is 2

Learn more about pH:

https://brainly.com/question/22983829

#SPJ1

The molecular weight of [tex](NH_4)_2SO_4[/tex] would be 132 g/mol.

The molecular weight, otherwise known as the molar mass of substances is the sum of the molar weights of individual atoms that make up the substance.

[tex](NH_4)_2SO_4[/tex] is made up of 2 atoms of N, 8 atoms of H, 1 atom of S, and 4 atoms of O.

Thus, the molecular weight of [tex](NH_4)_2SO_4[/tex] = (14x2) + (1x8) + 32 + (16x4)

                                                                     = 132 g/mol

In other words, the molecular weight of [tex](NH_4)_2SO_4[/tex] is 132 g/mol.

More on molecular weights can be found here: https://brainly.com/question/14507491

#SPJ1

The new volume of the gas will be 1.85L.

According to Boyle's Law, as pressure lowers, gas volume grows. According to Charles' Law, when the temperature rises, the volume of the gas also rises. Avogadro's Law also states that as the amount of gas increases, so does the volume of the gas.

Given, initial volume of gas V1 = 2L

initial temp T1 = 273K

initial pressure P1 = 101.3 kPa

final temperature, T2 = 500K

Final pressure, P2 = 200 kPa

let final or new volume be V,

now for a constant moles of gas,

by using ideal gas equation,

P1×V1/T1 = P2×V/T2

101.3×2/273 = 200×V/500

202.6/273 = 2V/5

V = 0.742×5/2

V = 1.85 L

The new volume of the gas will be 1.85L.

To know more about Gas laws visit

https://brainly.com/question/12669509

#SPJ1

The functional group of molecules as follows :

Molecule 1. is aldehyde and ketone, Molecule 2 is acid and thio, Molecule 3 is acid and amide, Molecule 4 is alcohol and ether, Molecule 5 is Alcohol and acid. The image attached below show the functional group and molecules are labeled.

The polar compounds are those compound having different positive and negative charge, therefore the bonding with atoms such as nitrogen, oxygen, or sulfur.

A buffer is a solution the can control the pH change along with the addition of an acidic or basic substance. It is able to neutralize small amounts of added acid or base, So it maintains the pH of the solution. This is important to maintain pH ranges.

Thus, Molecule 1. is aldehyde and ketone, Molecule 2 is acid and thio, Molecule 3 is acid and amide, Molecule 4 is alcohol and ether, Molecule 5 is Alcohol and acid.

To learn more about the polar compound, follow the link;

https://brainly.com/question/29869649

#SPJ1

There is a golden rule of solubility, non polar solute dissolve in non polar solvent and polar solute dissolve in polar solvent. Therefore, the correct option is option B.

Solution is a homogeneous mixture of two or more than two substances. A solution is a homogeneous mixture of solute and solvent molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution.

There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution. The nature of solvent tells about whether the solvent is in liquid, solid or gas form.

Let amount of 30% to mix, be X

Then amount of 18% to mix = 300 - X

0.3X + 0.18(300 - X) = 0.21(300)

0.3X+ 0.18(300) - 0.18X= 0.21(300)

0.3X - 0.18X =0 .21(300) -0 .18(300)

0.12X =0 .03(300)

X=75L

Therefore, the correct option is option B.

To know more about solution, here:

https://brainly.com/question/13812915

#SPJ1

Explanation:

This hot material rises to an area of lower pressure through the process of convection. Areas of lower pressure always have a lower melting point than areas of high pressure. This reduction in overlying pressure, or decompression, enables the mantle rock to melt and form magma.

Answer:

Explanation:

In basic solution (pH = 11), an amino acid typically exists in its zwitterionic form. This means that the amino acid has both a positive and a negative charge, due to the presence of both a basic amino group (-NH2) and an acidic carboxyl group (-COOH).

The structure of an amino acid in basic solution (pH = 11) can be represented as follows:

The central carbon atom (also known as the alpha carbon) is bonded to a hydrogen atom, an amino group (-NH2), a carboxyl group (-COOH), and a side chain R group.

The amino group is positively charged due to the loss of a proton (H+).

The carboxyl group is negatively charged due to the gain of a proton (H+).

Overall, the amino acid has a net charge of zero, due to the equal and opposite charges of the amino and carboxyl groups. This is known as the zwitterionic form of the amino acid.

Here is a visual representation of the structure of an amino acid in basic solution (pH = 11):

H |

N-C-COOH

|

R

Regenerate response

The VSEPR drawing for the compounds in the question are shown in the images attached.

We have to know that according to the valence shell electron pair repulsion theory, the structure of the molecule can be found by looking at the number of electron pairs that surround the central atom in the molecule.

Now the structure of the compounds as we can see in the images that ahve been attached are based on the Vlence Shell electron pair repulsion drawing for each of the compounds that we have mentioned in the question.

We can see that the structure of the compound must have a central atom and then the other atoms in the molecule are arranged around the central atom of the molecule.

The molecule would have a definite shape that is based on the number of electron shells in the molecule.

Learn more about molecule:https://brainly.com/question/19922822

#SPJ1

The limiting reactant would be calcium and the amount of product that can be made would be 7.14 grams.

Calcium reacts with oxygen to form calcium oxide according to the following balanced equation:

[tex]2Ca + O_2 --- > 2CaO[/tex]

In other words, the mole ratio of Ca to O is 2:1.

Mole of 35.1 g Ca = 35.1/40 = 0.1275

Mole of 37.1 g O = 37.1/16 = 2.3188

This means that oxygen is in excess while Ca is the limiting reagent.

The mole ratio of Ca to CaO is 1:1, thus the equivalent amount of CaO that will be produced will also be 0.1275 moles.

Mass of 0.1275 moles CaO = 0.1275 x 56 = 7.14 grams

In other words, the limiting reactant of the reaction is calcium while the amount of the product that can be made is 7.14 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/29856106

#SPJ1

Answer:

The answer is the last one only.

Explanation:

Light/sun gives energy and growth which makes the plants leaves/plant grow bigger.

Explanation:

Without the sun, plants wouldn't get the food that's needed to grow, reproduce and survive. plants need sunlight, water and carbon dioxide to live.

Answer:

To determine the volume of the solution in milliliters, we need to know the mass of CuNO3 and the concentration of the solution.

Given that 3.38g of CuNO3 is dissolved in water to make a 0.220 M solution, we can use the following formula to calculate the volume of the solution:

Volume = (Mass of CuNO3) / (Concentration of solution)

Plugging in the given values, we have:

Volume = (3.38 g) / (0.220 M)

Converting the mass to grams and the concentration to moles/liter, we have:

Volume = (3.38 g) / (0.220 mol/L)

Calculating, we find that the volume of the solution is approximately 15.36 liters.

To convert the volume to milliliters, we can multiply the volume in liters by 1000. In this case, the volume in milliliters is 15,360 ml.

Therefore, the volume of the solution in milliliters is approximately 15,360 ml.

Explanation:

Answer:

The number of moles of water in 100 g of vinegar is 0.47 moles.

Explanation:

The mass of copper nitrate produced in the reaction 3.65g of copper and 5.16g of nitric acid​ is 3.84g.

Nitric acid reacts with copper

4 HNO3(l) + Cu(s) ==> Cu(NO3)2(s and aq) + 2 NO2(g) + 2 H2O(l)

Deep blue colour characterises the copper nitrate salt that develops. Nitrogen dioxide is the gas that is created when strong nitric acid and copper interact. This maroon mist is nitrogen dioxide.

Copper :

=> mass copper nitrate

=> 3.65g Cu x 1mol of Cu/63.546 g Cu x 1 mol copper nitrate / 1 mol cu x 187.56 g/mol copper nitrate

=> 10.77g

HNO3 (Nitric acid):

=> Mass copper nitrate =3.65 g HNO3 X 1 mol HNO3/63.546 g HNO3 x 1mol of copper nitrate /4 mol HNO3 x 187.56 g/mol copper nitrate.

=> 3.84g.

Learn more about copper nitrate here:

brainly.com/question/29402119

#SPJ1

Troposphere atmosphere layer does this process happen The acidity of rainwater comes from the natural presence of three substances (CO2, NO, and SO2) found in the troposphere

To learn more about troposphere refers to:

brainly.com/question/30126863

#SPJ1

The volume of the metal block can be calculated using the density and mass of the block is 30.0 cm³

A metal block is a solid piece of metal that is typically used for machining and other industrial applications. It is usually made from aluminum, steel, or other metals, and can be machined into a variety of shapes and sizes depending on the application. Metal blocks are also used for casting, forging, and other manufacturing processes. Metal blocks may also be used for decorative purposes, such as sculpture or engraving. They are also used in jewelry making and engraving, as well as in medical and dental applications.

The volume of the metal block can be calculated using the density and mass of the block:
Volume = Mass/Density = 223.1 g/7.41 g/cm³ = 30.0 cm³
Since the metal block was submerged in the water, the volume of the block will be added to the volume of water in the beaker. Therefore, the original water level in the beaker can be calculated using the following equation:
Original Water Level = 150 mL + (30.0 cm³/1000 cm³/mL) = 180.0 mL

To learn more about metal block
https://brainly.com/question/30142110
#SPJ1

Answer:

A glove is like the earth because...

A globe is like the earth in that it is a three-dimensional representation of the earth's features, such as countries, oceans, and landmasses.

A globe is also like the earth in that it can rotate on its axis, which allows the viewer to see different parts of the earth depending on the angle of rotation.

A globe is not like the earth because...

A globe is not like the earth in that it is typically much smaller than the earth.

A globe is also not like the earth in that it does not depict the earth's relief features, such as mountains and valleys, in their true proportion to the rest of the earth's surface.

A globe is like the earth in that it is a scaled-down, spherical model of the earth's surface, representing physical features accurately. However, a globe is not like the earth because it is much smaller and does not rotate or revolve.

The globe and the earth are similar in two main ways. First, a globe is a scaled-down model of the earth, showing an accurate representation of the earth's surface. This includes physical features such as continents, oceans, and countries, which are mapped out precisely. Second, a globe is spherical, just like the earth.

However, there are differences between a globe and the earth. One key difference is the scale: the earth is far larger than any globe. The most obvious point of difference is the size: while a globe is small enough to be held in your hands or placed on a desk, the earth has a diameter of approximately 7,917.5 miles. Also, the globe is a static object, it does not rotate on its axis or revolve around the sun like the earth does.

https://brainly.com/question/13254506

#SPJ2

Answer:

40.10 atm. is answer i think ....