how to write lewis structure of n2?

Strong electrolytes are substances that completely dissociate into ions when dissolved in water, resulting in a high concentration of ions in solution. Here are some examples of strong electrolytes:

It's significant to remember that not all substances that dissolve in water function as powerful electrolytes. Weak electrolytes are substances that only partially breakdown into ions. Also known as non-electrolytes, some substances like nonpolar molecules do not dissociate at all.

To know more about strong electrolyte , check out :

https://brainly.com/question/2285692

#SPJ1

In a chemical change, the substances that make up matter change into other substances with physical properties and chemical properties.

Chemical changes occur when a substance combines with another to form a new substance, called chemical synthesis or, alternatively, chemical decomposition into two or more different substances. These processes are called chemical reactions and, in general, are not reversible except by further chemical reactions. Some reactions produce heat and are called exothermic reactions and others may require heat to enable the reaction to occur, which are called endothermic reactions. Understanding chemical changes is a major part of the science of chemistry.

When chemical reactions occur, the atoms are rearranged and the reaction is accompanied by an energy change as new products are generated. An example of a chemical change is the reaction between sodium and water to produce sodium hydroxide and hydrogen. So much energy is released that the hydrogen gas released spontaneously burns in the air. This is an example of a chemical change because the end products are chemically different from the substances before the chemical reaction.

Learn more about Chemical change

https://brainly.com/question/23693316

#SPJ1

Answer:

The reaction between a conjugated diene and an alkene

Explanation:

The Diels–Alder reaction is the reaction between a conjugated diene and an alkene (dienophile) to form unsaturated six-membered rings. Since the reaction involves the formation of a cyclic product via a cyclic transition state, it is also referred to as a "cycloaddition".

According to the kinetic-molecular theory, particles in solids are in constant motion.

Explain kinetic-molecular theory?

The kinetic-molecular theory is a theory that explains the properties of gases in terms of the motion and interactions of molecules. This theory states that all gases are composed of tiny particles that are in constant motion and that these particles collide with each other and with the walls of their container. The collisions between the molecules cause the gas particles to move in random directions, and the motion of these particles is what is responsible for the pressure of the gas. The kinetic-molecular theory also states that the average kinetic energy of the individual gas molecules is proportional to the temperature of the gas.

In the kinetic-molecular theory, particles in solids have fixed positions and are unable to move or vibrate, which help to explain the properties of solids such as their rigidity and strength.

Therefore, particles in solids are in constant motion.

To learn more about kinetic-molecular theory from the link

https://brainly.com/question/15013597

#SPJ4

The type of the ClF₃ molecule is the covalent compound. The Chlorine Trifluoride will represents the trigonal bipyramidal geometry.

The Chlorine Trifluoride that is ClF₃ represents the trigonal bipyramidal geometry. In the chlorine trifluoride compound, there are the three bond pairs of the electrons and the two lone pairs of the electrons around the central atom that is the chlorine atom. The total of the five pairs of the electrons represent the trigonal bipyramidal geometry.

The covalent compound is formed by the mutual sharing of the electrons. The chlorine atom will forms the three covalent bonds with the surrounding fluorine atoms in the stable state.

To learn more about covalent compound here

https://brainly.com/question/30420584

#SPJ4

Answer:

It is important to drop a ball from the same height multiple times to test and validate a theory or hypothesis. By doing this, one can observe and measure the consistency of the results and determine the average or most common outcome. The numbers may be slightly different due to small variations in the experiment such as air resistance, the angle at which the ball was dropped, or variations in the measurement tools used to record the data. By doing multiple trials and calculating an average, the effects of these variations can be minimized and a more accurate result can be obtained.

Explanation:

Dropping a ball from the same height three times is important in an experiment to calculate the average or mean value of the times it takes the ball to fall from the height to the ground. By repeating the experiment multiple times, we can minimize the effect of random errors and get a more accurate result.

However, even when dropping the ball from the same height three times, the recorded times may be slightly different due to several reasons. Some of these reasons could be variations in the initial release height of the ball, differences in the air resistance experienced by the ball during its fall, and slight variations in the reaction time of the person measuring the time. These variations can result in slightly different measured times, which can be accounted for by calculating the average value.

The molecular weight is the number of grams per mole for the substance and the conversion factor for moles to grams for that specific substance.

Molecules are made up of different atoms. For example, a water molecule (H₂O) is composed of one oxygen atom and two hydrogen atoms. Molecular weight (or molecular weight) is the sum of the atomic masses of all atoms present in a molecule. Moles is the amount in grams of a substance numerically equal to molecular weight. According to Avogadro's number, the number of molecules of a substance in one mole is 6.02 × 10²³ molecules. If we know the molecular weight of a substance and number of moles, then we can calculate the weight of substance, using the formula: molecular weight × number of moles

= mass of the substance in grams. Therefore, the mass of 1 mole of water is 18.02 g (1 mole of H₂O x 18.02 g/mol = 18.02 g).Hence, we got the relationship between moles and mass of substance.

For more information about Molecular weight, visit :

https://brainly.com/question/14596840

#SPJ4

In a chemical reaction represented by the general equation A + B → C + D, there are four distinct mole ratios that can be written.

The MOLE RATIO is a comparison of how many moles of one substance are required to participate in a chemical reaction with another substance, based on the balanced chemical equation.

What is mole ratio?

To know more about mole ratio, click the link given below:

https://brainly.com/question/15288923

#SPJ1

Answer:

Explanation:

The beta decay of uranium-232 can be represented by the following equation:

232U ------------> 232Th + 0e + v

where 0e represents a beta particle (an electron) and v represents an antineutrino.

The smallest component of an element that maintains its identity during a chemical reaction is known as the atom.

The smallest piece of matter with all of an element's chemical properties is an atom. The tiniest part of an element, an atom nonetheless possesses all of the element's chemical characteristics. is a positively charged particle that moves around the nucleus.

The smallest elemental particle that can retain all of an element's chemical characteristics is an atom. It is the indivisible unit of matter that is capable of existing alone. It is a substance that makes up matter. The smallest component of an element that maintains its identity during a chemical reaction is known as the atom.

The smallest component of an element, an atom has exactly the same chemical makeup as the element as a whole. Dalton's Atomic Theory, which states that all matter is made up of indivisible, indestructible atoms, was the first reliable theory describing the nature of matter.

Therefore, the correct answer is option C) atom.

The complete question is;

The smallest part of an element that retains the chemical properties of the element.

A) electron

B) molecule

C) atom

D) proton

To learn more about atom refer to:

https://brainly.com/question/17545314

#SPJ4

The pressure exerted by a gas can be calculated using the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature in kelvins.

Plugging in the given values, we get:

P = (nRT) / V

P = (1.35 mol * 8.31 J/mol*K * 320.0 K) / (2.50 L * 10^-3 m^3)

P = (4460.8 J) / (0.0025 m^3)

P = 17843.2 Pa

To convert from pascals to atmospheres, we divide by 101325 Pa/atm:

P = 17843.2 Pa / 101325 Pa/atm

P = 0.176 atm

So, the pressure exerted by 2.50 L of HF containing 1.35 mol at 320.0 K is approximately 0.176 atm.

Specific heat capacity is the quantity of heat needed to change 1.00 g of a substance by 1.00 K.

Option A is correct

Specific heat capacity is like an objects 'thermal inertia' it is an object's resistance to an change in temperature.

Water has a very high specific heat and it takes a long time for it to lose heat and it also takes a long period of time to gain heat.

The formula for specific heat capacity, C , of a substance with mass m , is shown as C = Q /(m ⨉ ΔT) .

Where Q is the energy added and ΔT is the change in temperature.

Learn more about specific heat capacity, at: https://brainly.com/question/21406849

#SPJ1

Freezing is endothermic process. It involves absorption of heat from the surrounding environment.

A substance will have a freezing point and if we cooled it down below that, the particles in the substance start to lose energy and it will slow down.

So when the temperature is decreased, the kinetic energy will also decrease for the particles. They will start to move closer together.

So imagine if the particles are moving together, then the attraction or attractive force between the particles can become stronger. So this makes them arrange themselves in more orderly fashion or structure.

This requires energy because they are overcoming the intermolecular forces between the particles.

They will absorb energy from surrounding. So we can say freezing is an endothermic process.

Learn more about Freezing:

https://brainly.com/question/12919973

#SPJ4

The expression that can be used to find the value of B in square inches for this cylinder is A) π(8.3)2.

The combined area of a cylinder's curving surface and its two circular bases is known as the cylinder's area. The surface area of a cylinder is determined using the following formula:

A = 2πrh + 2πr²

We need to find the expression to calculate the area of the base of the given cylinder, which has dimensions r = 8.3 meters and h = 11.1 meters.

The formula for the area of the base of a cylinder is B = πr², where r is the radius of the base of the cylinder.

So, substituting the given value of r, we get:

B = π(8.3) ²

Simplifying this expression, we get:

B = π(68.89)

B = 68.89π.

To know more about surface area, visit:

https://brainly.com/question/29298005

#SPJ1

The chemical P2 refers to the diphosphorus molecule, which is a compound made up of two phosphorus atoms bonded together.

Diphosphorus, also known as P2, is a chemical compound composed of two phosphorus atoms covalently bonded together. It is a highly reactive and unstable molecule that is rarely encountered in its pure form. Diphosphorus is an allotrope of phosphorus, meaning it is a different structural form of the same element.

At room temperature, diphosphorus exists as a colorless, odorless gas with a molecular weight of 60.98 g/mol. It is highly reactive and can easily ignite when exposed to air, making it a fire and explosion hazard. Diphosphorus is also highly toxic and can cause severe burns and respiratory problems if inhaled.

Diphosphorus has a unique electronic structure with a triple bond between the two phosphorus atoms. This triple bond makes the molecule highly reactive and unstable, as it seeks to break apart and form more stable bonds with other atoms. As a result, diphosphorus is a useful starting material for the synthesis of other phosphorus-containing compounds.

To know more about Diphosphorus here:

https://brainly.com/question/28024394#

#SPJ11

We must apply the following equation:

[tex]n=\dfrac{m}{M}[/tex]

We're given:

Apply the equation:

[tex]n=\dfrac{m}{M}[/tex]

[tex]n=\dfrac{15.89}{16.04}[/tex]

[tex]n = 0.9906\hspace{4}mol[/tex]

0.9906 mol

The number of mmols of HBr are in 17.6 ml of 0.0200 M HBr is 0.352 mmol.

The volume of the solution = 17.6 mL = 0.0176 L

The molarity of the solution = 0.0200 M

The expression for the molarity of the solution is as :

The molarity = moles / volume in L

The number of the moles = molarity × volume

The number of moles = 0.0200 × 0.0176

The number of the moles = 0.000352 mol

The number of the moles in mmoles = 0.352 mmol

Thus, the number of moles of HBr is 0.352 mmoles in the 17.6 ml of the 0.0200 M.

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

An atom's nucleus is surrounded by electrons and protons and neutrons, each with a unique energy level. The Pauli exclusion principle shows how to fill orbitals with electrons in the proper order.

Pauli's exclusion principle is a fundamental principle of quantum mechanics that states that no two fermions can occupy the same quantum state simultaneously. Fermions are a class of subatomic particles that include electrons, protons, and neutrons, and are distinguished by their half-integer spin.

The exclusion principle is named after the Austrian physicist Wolfgang Pauli, who formulated it in 1925. The principle is based on the wave nature of matter and the fact that fermions are described by wave functions that obey the Schrödinger equation.

Energy order of orbital

1s<2s<2p<3s<3p<4s<3d<4p<5s<4d<5p<6s<4f<5d

An atom's nucleus is its main structural component. It is surrounded by electrons and has protons and neutrons inside. These electrons all share the same mass and charge, though. An atom's electrons each have a unique energy level. The positively charged nucleus's strongest attractive force is felt by the electrons nearest to it, which have the lowest energy. Higher energy electrons are located farther away.

The Pauli exclusion principle demonstrates how to fill orbitals with electrons in the proper order.

To learn more about Pauli's Law of exclusion, click the given link ;

brainly.com/question/11898781

#SPJ4

Yes, freezing involves the creation of a crystal structure. Freezing is the process of changing a liquid to a solid by cooling it below its freezing point.

During the freezing process, the molecules of the liquid slow down and begin to arrange themselves in a repeating pattern, forming a crystal structure. The crystal structure that forms during freezing is determined by the chemical composition of the substance, its temperature, and the rate at which it is cooled.

If a liquid is cooled slowly, larger and more well-defined crystals will form, whereas if a liquid is cooled quickly, smaller and less well-defined crystals will form. The crystal structure created during freezing can have a significant impact on the physical properties of the solid, such as its strength, transparency, and melting point.

Learn more about Freezing:

https://brainly.com/question/24314907

#SPJ4

The data collected along the frontal boundary would best alert scientists that the two colliding air masses may cause a tornado is large differences in temperature, humidity, and air pressure on either side of where the fronts meet. Therefore, option C is correct.

When two different air masses collide, they do not mix. They rub up against each other along a line known as a front. Because warm air is lighter, it rises when it collides with cold air. It cools at high altitude, and the water vapor it contains condenses.

A weather front is a transition zone at the Earth's surface between two different air masses. Each air mass has its own temperature and humidity profile.

Turbulence is common at a front, which is the boundary between two different air masses. Clouds and storms can form as a result of turbulence.

Thus, option C is correct.

To learn more about the fronts meet, follow the link;

https://brainly.com/question/2215934

#SPJ1

The concentration of HCl in the solution is 0.651 mol/kg.

To find the concentration of Cl- ions in the CaCl2 solution, we can first calculate the number of moles of CaCl2 that were dissolved:

23.7 g of CaCl2 / 110.98 g/mol

=> 0.214 moles of CaCl2

Next, we can use the number of moles to find the number of moles of Cl- ions:

0.214 moles of CaCl2 × 2 moles of Cl- ions/mole of CaCl2

= 0.428 moles of Cl- ions

Finally, we can use the volume of the solution to find the concentration in moles per liter (M):

Volume = 375 g of water ÷ 1.05 g/mL

=> 357.14 mL

=> 0.35714 L

Concentration = 0.428 moles of Cl- ions ÷ 0.35714 L

=> 1.20 M

So, the concentration of Cl- ions in the CaCl2 solution is 1.20 M.

Next, to find the concentration of HCl in molality, we can first calculate the number of moles of HCl that were dissolved:

5.5 g of HCl ÷ 36.46 g/mol

=> 0.151 moles of HCl

Next, we can use the number of moles of HCl and the mass of the solvent (C2H6O) to find the molality:

Molality = 0.151 moles of HCl / (200 g of C2H6O ÷ 46.07 g/mol)

=> 0.651 mol/kg

To learn more about Concentration :

https://brainly.com/question/29721078

#SPJ4

2.5mol of  aluminium ions are in 1.25mol of AI[tex]_2[/tex]O[tex]_3[/tex]. There are precisely  6.022×10²³  elementary entities in a mole.

The International System of Units uses the mole (symbol mol) as the unit of substance quantity (SI). How so many elementary units of a certain substance are present in an item or sample is determined by the quantity of that material.

There are precisely  6.022×10²³  elementary entities in a mole. An elementary thing may consist of an atom, an molecule, and ion, and ion pair, or maybe a subatomic particle like an electron dependent on what the material is. AI[tex]_2[/tex]O[tex]_3[/tex] contains 2 mole of aluminium ion

mole of AI[tex]_2[/tex]O[tex]_3[/tex] =1.25mol

mole of aluminium ion =2×1.25mol =2.5mol

Therefore, 2.5mol of  aluminium ions are in 1.25mol of AI[tex]_2[/tex]O[tex]_3[/tex].

To learn more about mole, here:

https://brainly.com/question/15209553

#SPJ9

A ddNTP differs from a dNTP in that it has a non-nucleotide group attached to the sugar moiety.

dNTPs and ddNTPs are both types of nucleotides used in DNA synthesis. A dNTP (deoxynucleoside triphosphate) is a building block of DNA that contains a deoxyribose sugar, a nitrogen-containing base (adenine, guanine, cytosine, or thymine), and three phosphate groups.

On the other hand, a ddNTP (dideoxynucleoside triphosphate) has a non-nucleotide group attached to the sugar moiety, which terminates DNA chain extension. As a result, ddNTPs differ from dNTPs in terms of the functional group attached to the sugar moiety.

Learn more about functional groups:

https://brainly.com/question/493841

#SPJ4

The molecular geometry of SO3 is trigonal planar.


Molecular geometry is the three-dimensional arrangement of atoms in a molecule.

It is determined by the number of bonding and non-bonding electron pairs in the valence shell of the central atom. In the case of SO3, the central atom is sulfur (S), which is surrounded by three oxygen (O) atoms.

Each oxygen atom forms a double bond with the sulfur atom, giving a total of six bonding electron pairs. Since there are no non-bonding electron pairs, the molecular geometry is determined by the arrangement of the three oxygen atoms around the central sulfur atom.

The most stable arrangement is one in which the oxygen atoms are placed at the corners of an equilateral triangle, with the sulfur atom at the center. This gives the molecule a trigonal planar geometry.

To know more about Molecular geometry here:

https://brainly.com/question/7558603#

#SPJ11

Heat will flow from the titanium to the lead and from the iron to the titanium until the temperatures are equal.

Heat always flows from a region of higher temperature to a region of lower temperature until both regions reach thermal equilibrium. In this case, since the lead block is initially warmer than the titanium block and the iron block is initially even warmer than the lead block, heat will flow from the iron block to the lead block and from the lead block to the titanium block until all three blocks reach the same temperature.

However, it's important to note that heat will not flow directly from the iron block to the titanium block, because there is an intermediate block (the lead block) between them. Heat can only flow directly between the adjacent blocks in contact with each other, and the heat transfer process continues until all the blocks reach thermal equilibrium.

To know more about Heat, visit:

https://brainly.com/question/4978085

#SPJ1

The Bohr model for argon is a representation of the arrangement of the electrons in the atom of the element argon.

In the Bohr model, the electrons are arranged in concentric circles around the nucleus of the atom. Each circle represents a different energy level, and the electrons are located in these energy levels according to their energy.

For argon, the Bohr model shows that there are 18 electrons in the atom. These electrons are arranged in the following way:

- 2 electrons in the first energy level
- 8 electrons in the second energy level
- 8 electrons in the third energy level.

To know more about Bohr model here:

https://brainly.com/question/3964366#

#SPJ11

Answer:

Gamma-rays is the answer i think.

Explanation:

I just learned it in chemistry class in August.

The gauge pressure of the air in the tank is 101325 Pa - 9.439*L  when The air pressure in a tank is measured using an inclined manometer whose arm is inclined 45 degree.

Let's call the length of the inclined arm of the manometer L. Then, the vertical component of the arm length is given by

[tex]L sin(45) = L/\sqrt2[/tex]

Next, we can use the hydrostatic pressure equation to relate the pressure difference between the two arms of the manometer to the difference in height:

ΔP = ρgh

Where ΔP is the pressure difference, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the difference in height between the two arms of the manometer.

Since the two arms of the manometer are open to the atmosphere, the pressure at the top of the manometer is equal to the atmospheric pressure, which we can assume to be 101325 Pa. Therefore, the gauge pressure of the air in the tank is equal to:

[tex]P_{gauge} = P_{atm} - \triangle P[/tex]

where [tex]P_{atm[/tex] is the atmospheric pressure.

Putting it all together, we get:

ΔP = (ρwater - ρair)gh

[tex]= (1000 kg/m^3 - 1.225 kg/m^3) * 9.81 m/s^2 * (L/\sqrt2)[/tex]

= 9.439 * L

Therefore, the gauge pressure of the air in the tank is:

Pgauge = Patm - ΔP

= 101325 Pa - 9.439 * L

Note that the pressure will be in Pa, and you can convert it to other units like psi or bar as necessary.

Learn more about manometer :

https://brainly.com/question/18354578

#SPJ4

A: 1000 µL micropipette, B: 100 µL micropipette, C: 1000 µL micropipette or 1 mL graduated pipette and D: 20 µL micropipette or 25 µL micropipette.

A) 874 µL: An appropriate pipette to use for 874 µL could be a P1000 pipette, which has a volume range of 100 µL to 1000 µL.

B) 57 µL: An appropriate pipette to use for 57 µL could be a P200 or P20 pipette. The P200 has a volume range of 20 µL to 200 µL, while the P20 has a volume range of 2 µL to 20 µL.

C) 340 µL: An appropriate pipette to use for 340 µL could be a P1000 or P200 pipette.

D) 15 µL: An appropriate pipette to use for 15 µL could be a P20 pipette, which has a volume range of 2 µL to 20 µL.

Learn more about volume :

https://brainly.com/question/25252629

#SPJ4