The number of the p-orbitals are occupied in a K atom is six p orbitals.
Potassium belongs to an alkali metal with the atomic number is 19 and the atomic mass of 39. The potassium is placed in the first group and the fourth period. The electronic configuration of the potassium is as :
Electronic configuration of potassium = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹
The region or the space around the nucleus in which the probability of the finding of the electron is called as the orbitals. From the electronic configuration, it is clear that 2p and 3p sublevels are the entirely occupied because the each of them has the six electrons.
To learn more about orbital here
https://brainly.com/question/30835065
#SPJ4
Write the equation for the reaction of iron (iii) phosphate with sodium sulfate to make iron (iii) sulfate and sodium phosphate
The equation for the reaction of iron (iii) phosphate with sodium sulfate to make iron (iii) sulfate and sodium phosphate is 2 FePO₄ + 3 Na₂SO₄ ⇒ Fe₂(SO4)₃ + 2 Na₃PO₄.
What balanced chemical equation ?Each atom on both sides of a balanced chemical equation has the same number and type. A balanced equation's coefficients must have the simplest whole number ratio. In chemical reactions, mass is always conserved.
2 FePO₄ + 3 Na₂SO₄ ⇒ Fe₂(SO4)₃ + 2 Na₃PO₄ this is a balanced chemical equation for iron (iii) phosphate with sodium sulfate to make iron (iii) sulfate and sodium phosphate.
Thus, the reaction is 2 FePO₄ + 3 Na₂SO₄ ⇒ Fe₂(SO4)₃ + 2 Na₃PO₄.
To learn more about the balanced chemical equation, follow the link;
https://brainly.com/question/28294176
#SPJ9
Which of the following aqueous solutions has the highest boiling point? A.0.1M KNO3
B.0.1M Na3PO4
C.0.1M BaCl2
D.0.1M K2SO4
The aqueous solutions has the highest boiling point is 0.1M BaCl₂ because it dissociates into three ions in solution, which is the highest number of ions. Option C is correct.
The boiling point of a solution is directly related to the concentration of solute particles in the solution. A solution having a higher concentration of solute particles will have a higher boiling point.
Out of the given options, BaCl₂ dissociates into three ions (Ba²⁺, 2Cl⁻) in solution, K₂SO₄ dissociates into three ions (2K⁺, SO₄²⁻) in solution, Na₃PO₄ dissociates into four ions (3Na⁺, PO₄³⁻) in solution, and KNO3 dissociates into two ions (K⁺ NO₃⁻) in solution.
Therefore, the aqueous solution with the highest boiling point will be the one that dissociates into the most number of ions i.e 0.1M BaCl₂.
To know more about boiling point here
https://brainly.com/question/2153588
#SPJ4
How do you calculate the Parkland formula?
The Parkland formula is used to calculate the amount of fluid needed to resuscitate a burn victim. The formula is as follows:
Parkland formula = 4 mL x % of total body surface area burned x body weight (in kg)
To calculate the Parkland formula, follow these steps:
1. Determine the percentage of the total body surface area that has been burned. This can be done using the "rule of nines," which divides the body into sections, each representing 9% of the total body surface area.
2. Multiply the percentage of the total body surface area burned by 4 mL. This will give you the amount of fluid needed per kilogram of body weight.
3. Multiply the amount of fluid needed per kilogram of body weight by the patient's body weight in kilograms. This will give you the total amount of fluid needed for resuscitation.
4. The total amount of fluid should be given over the first 24 hours after the burn, with half of the fluid given in the first 8 hours, and the remaining half given over the next 16 hours.
For example, if a patient has 30% of their total body surface area burned and weighs 70 kg, the Parkland formula would be calculated as follows:
Parkland formula = 4 mL x 30% x 70 kg = 8400 mL
Half of the fluid (4200 mL) would be given in the first 8 hours, and the remaining half (4200 mL) would be given over the next 16 hours.
To know more about Parkland formula here:
https://brainly.com/question/30390609#
#SPJ11
What is the Lewis structure for HBr?
The final Lewis structure for HBr is:
:Br:
.. ..
H - :
.. ..
The Lewis structure for HBr is as follows:
H - Br
In this structure, the hydrogen atom (H) and the bromine atom (Br) are bonded together by a single covalent bond. This is represented by the dash (-) between the two atoms. The Lewis structure shows the arrangement of the valence electrons around the atoms in a molecule.
To draw the Lewis structure for HBr, we first need to determine the number of valence electrons for each atom. Hydrogen has 1 valence electron and bromine has 7 valence electrons.
Next, we need to arrange the atoms and connect them with a single bond. The hydrogen atom is placed on one side of the bromine atom and a single bond is drawn between them.
Finally, we need to complete the octets for the atoms by adding lone pairs of electrons around the bromine atom. Bromine needs 7 more electrons to complete its octet, so we add 3 lone pairs of electrons around it.
To learn more about Lewis structure refer here:
https://brainly.com/question/20300458#
#SPJ11
Suppose NaOH standardization by KHP determined that a volume of 25.00 ml NaOH has a concentration of 0.049 M. Suppose 22.20 mL of KHP was used to get to the endpoint in this standardization. What is the mass of KHP dissolved in 50.00 mL of the standardizing KHP titrant? 0.56 g 0.28 g 2.82 g 5.63 g
The mass of KHP dissolved in 50.00 mL of the standardizing KHP titrant is 0.2505 g. The answer is 0.28 g, rounded to two significant figures . The correct answer is (C).
The balanced chemical equation for the reaction of potassium hydrogen phthalate (KHP) with sodium hydroxide (NaOH) is:
KHP + NaOH → NaKP + H2O
From the given information, we know that 22.20 mL of KHP is neutralized by 25.00 mL of NaOH of concentration 0.049 M. Therefore, we can calculate the amount (in moles) of NaOH used:
moles NaOH = volume × concentration = 25.00 mL × 0.049 mol/L = 0.001225 mol
Since the reaction between KHP and NaOH is 1:1, the amount of KHP used is also 0.001225 mol. We can use the molar mass of KHP to calculate the mass of KHP dissolved in 50.00 mL of the standardizing KHP titrant:
mass KHP = moles KHP × molar mass KHP = 0.001225 mol × 204.23 g/mol = 0.2505 g
Therefore, the mass of KHP after standardization is 0.2505 g. Rounded to two significant figures, the answer is 0.28 g. So, correct option is (C).
To know more about Standardization:
https://brainly.com/question/30695832
#SPJ4
What are examples of heterogeneous mixtures?
Some examples of heterogeneous mixtures are oil and water, sand and water, kerosene, and water, oil and vinegar, smog (gas + solid), soda (water + CO2), etc.
A heterogeneous mixture is a kind of mixture in which all the components are entirely mixed and all the particles can be noticed under a microscope. We can readily recognize the components and more than one phase can be glimpsed by the bare eyes. Heterogeneous mixtures are not consistent. If you endure two selections from various parts of the mixture, they will not have an identical composition. You can utilize a mechanical technique to isolate components of a heterogeneous mixture.
To learn more about heterogeneous mixtures visit here:
https://brainly.com/question/30023123
#SPJ4
Orla and eduardo each looked at a strand of their hair under a microscope and measured the diameter. Orla's strand was 0. 005 cm 0. 005cm0, point, 005, start text, c, m, end text in diameter, and eduardo's strand was 0. 012 cm 0. 012cm0, point, 012, start text, c, m, end text in diameter.
The diameter of Eduarduo,s hair is greater than Orla,s hair by 0.007cm.
A diameter of a circle is any straight line segment that passes through the centre of the circle and has endpoints on the circle in geometry. It is also known as the circle's longest chord. Both definitions apply to the diameter of a sphere.
Given:- The diameter of Orla,s hair strand is 0.005cm.
The diameter of Eduarduo hair strand is 0.012cm.
Clearly, 0.012>0.005cm.
The difference between the diameters= 0.012-0.005=0.007cm.
Thus the diameter of Eduarduo hair is greater than Orla hair by 0.007cm.
To know more about Diameter refer to:-
https://brainly.com/question/390660
#SPJ4
Question:
What is the molar mass of copper (Cu)?
Molar Mass:
Molar mass is the mass of a mole of that substance. For an atom, the molar mass of the element is also known as atomic mass (mass of 1 mole of an atom). For molecules, the molar mass is also known as molecular mass (Mass of 1 mole of the molecule).
An atom of copper has an atomic mass of 63.546 amu. So, the molar mass of copper metal is equals to the 63.546 g/mol.
Molar mass is defined as the mass of a mole of that substance. For an atom, the molar mass of the element is also known as atomic mass (mass of 1 mole of an atom). For molecules, the molar mass is also known as molecular mass (Mass of 1 mole of the molecule). The units of molar mass is grams per mole. The unit of atomic mass is atomic mass unit, a.m.u. Cu (Copper) is a transition element whose atomic number is 29. The number of protons in copper atom = 29.
The number of neutrons in copper atom = 35. The atomic mass or mass number of copper is 63.546 amu. The molar mass of any element is equal to its
atomic mass and has the units g/mol. So, the molar mass of copper is 63.546 g/mol.
To learn more about atomic mass , visit :
https://brainly.com/question/6166945
#SPJ4
The process of converting gas into liquid on cooling is called:(A) Evaporation(B) Condensation(C) Diffusion(D) Sublimation
Answer: Condensation
Explanation:
When particles go from a gas to a liquid, it is called condensation.
On a hot summer day, you see this happening when a cold glass of ice tea forms water on the outside of the glass. Humidity in the air comes in contact with the cold glass of tea and water droplets form on the glass.
Two gas
molecules collide together in a box container. Which reaction
accurately portrays the kinetic molecular theory?
Gas molecules are assumed to be in constant random motion and to collide perfectly elastically with one another in this theory. They bounce off one another. These particles are assumed to be spherical. There are also no interactions between the molecules.
What is kinetic molecular theory ?According to kinetic molecular theory, gas particles are in constant motion and have perfectly elastic collisions. Both Charles' and Boyle's laws can be explained using kinetic molecular theory. The average kinetic energy of a gas particle collection is only proportional to absolute temperature.
Collisions are perfectly elastic; when two molecules collide, their kinetic energies and directions change, but the total kinetic energy remains constant. Collisions do not have a "sticky" effect. The absolute temperature is directly proportional to the average kinetic energy of the gas molecules.
Thus,The two molecules will stay together because they are attracted to each other.
To learn more about the kinetic molecular theory, follow the link;
https://brainly.com/question/17121882
#SPJ9
How to Determine the Highest Ionization Energy
The highest ionization energy can be determined by looking at the periodic table and finding the element with the highest atomic number. This element will have the highest ionization energy as it requires the most energy to remove an electron from its outermost shell.
Ionization energy is the energy required to remove an electron from an atom or ion. The amount of ionization energy is dependent on the atomic structure of the element. The more electrons an atom has, the more energy is required to remove one. Therefore, as the atomic number increases, so does the ionization energy.
To know more about the Ionization Energy, here
brainly.com/question/28385102
#SPJ4
What is zero order kinetics?
Zero-order kinetics is defined as the kinetics that undergoes constant elimination regardless of the plasma concentration, following a linear elimination phase as the system that becomes saturated.
Zero-order reaction is generally defined as a chemical reaction wherein the rate does not vary with the increase or decrease in the concentration of the reactants.
A few substances are often eliminated by means of zero-order elimination kinetics, because their elimination process is saturated. Examples of zero order kinetics are Ethanol, Phenytoin, Salicylates, Cisplatin, Fluoxetin, Omeprazol.
The integrated rate law for the zero-order kinetics is given as A → [A]t = -kt + [A](0). This is because this equation has the form y = mx + b, a plot of the concentration of A as a function of time yields a straight line.
Learn more about zero order kinetics from the link given below.
https://brainly.com/question/3454900
#SPJ4
what is molar mass of kclo3 ?
The molar mass of KClO3 is 122.55 g/mol.
To find the molar mass of a compound, you need to add up the atomic masses of each element in the compound. You can find the atomic masses on the periodic table.
For KClO3, the formula tells us that there is one atom of potassium (K), one atom of chlorine (Cl), and three atoms of oxygen (O).
The atomic mass of potassium is 39.10 g/mol, the atomic mass of chlorine is 35.45 g/mol, and the atomic mass of oxygen is 16.00 g/mol.
So, the molar mass of KClO3 is:
(1 x 39.10 g/mol) + (1 x 35.45 g/mol) + (3 x 16.00 g/mol) = 122.55 g/mol
Therefore, the molar mass of KClO3 is 122.55 g/mol.
To know more about molar mass here:
https://brainly.com/question/12127540#
#SPJ11
how does an atom become a positive or a negative ion?
An atom can become a positive or negative ion depending on the number of electrons it possesses.
An atom can become a positive ion when it loses electrons, and a negative ion when it gains electrons. This is because all atoms have an equal number of protons, which carry a positive charge, and electrons, which carry a negative charge.
When the number of electrons compared to protons is changed, the atom can either become positively charged or negatively charged. For example, if an atom with six protons loses one electron, it will have five electrons and six protons, resulting in a net positive charge.
Alternatively, if the atom gains an electron, it will have seven electrons and still six protons, resulting in a net negative charge.
For more questions like Atom click the link below:
https://brainly.com/question/491497
#SPJ4
What are the products of Citric Acid cycle and where are they given off?
The products of the Citric Acid cycle are:
- 2 molecules of ATP (adenosine triphosphate)
- 6 molecules of NADH (nicotinamide adenine dinucleotide)
- 2 molecules of FADH₂ (flavin adenine dinucleotide)
- 4 molecules of CO₂ (carbon dioxide)
The Citric Acid cycle, also known as the Krebs cycle or the tricarboxylic acid (TCA) cycle, is a series of chemical reactions that take place in the mitochondrial matrix of eukaryotic cells.
These products are given off in different steps of the Citric Acid cycle. The 2 molecules of ATP are produced in the substrate-level phosphorylation step, the 6 molecules of NADH are produced in the oxidation steps, the 2 molecules of FADH₂ are produced in the succinate dehydrogenase step, and the 4 molecules of CO₂ are produced in the decarboxylation steps.
The products of the Citric Acid cycle are used in other metabolic processes, such as the electron transport chain, to produce more ATP for the cell. The NADH and FADH₂ molecules are used as electron carriers in the electron transport chain, which produces a large amount of ATP. The CO₂ molecules are given off as waste products and are exhaled from the body during respiration.
To know more about Citric Acid cycle here:
https://brainly.com/question/29857075#
#SPJ11
In a polar covalent bond, electrons are shared ___________.
A. equally
B. unequally
C. between non-metals with similar electronegativities
D. between a metal and a non-metal
In a polar covalent bond, electrons are shared unequally. The correct alternative is option b.
A polar covalent bond is a type of bond in which electrons are shared unequally between two atoms. This unequal sharing of electrons results in a partial negative charge on one side of the bond and a partial positive charge on the other side.
This charge separation creates a dipole, which is a molecule with two poles.
The unequal sharing of electrons is due to the difference in electronegativity between the two atoms. The atom with the higher electronegativity will have a greater attraction for the electrons and will therefore have a partial negative charge, while the atom with the lower electronegativity will have a partial positive charge.
To know more about polar covalent bond here:
https://brainly.com/question/28955235#
#SPJ11
The densest water originates from low latitudes.
True
False
False. The densest water is produced at high latitudes where the water is cold and has a high concentration of dissolved salts, causing it to be more dense. This dense water sinks to the ocean floor and spreads to lower latitudes, where it has a significant impact on global ocean circulation.
What is densest water?The densest water is known as North Atlantic Deep Water, which is the densest and coldest water in the ocean. It is formed in the North Atlantic Ocean near the Labrador Sea and Greenland, where the water is cooled by the atmosphere and becomes denser due to the high concentration of dissolved salts.
Dense water then sinks to the ocean floor and spreads to other parts of the world ocean playing a crucial role in the global ocean circulation system.
North Atlantic Deep Water is one of the most important and well-studied water masses in the ocean, as it has a significant impact on the Earth's climate and weather patterns.
Learn more about densest water here : brainly.com/question/15696598
#SPJ1
True or False? when combining a strong acid with water to dilute it, you should add the acid to the water.
When diluting a strong acid with water, it is recommended to add the acid to the water and not the other way around. The statement is true.
This is because adding water to the acid can cause a rapid and exothermic reaction, leading to splattering and potential injury.
When the acid is added to the water, the heat generated is absorbed by the water, reducing the potential for splattering. Additionally, adding the acid to water allows for better mixing and reduces the risk of creating concentrated acid pockets that can be dangerous.
Overall, it is important to follow safe laboratory practices when working with acids and to consult with a trained professional if you are unsure about the proper procedures.
To know more about the dilution, here
brainly.com/question/28392867
#SPJ4
energy stored in chemical bonds is known as which type of energy?
Energy stored in chemical bonds is known as "Potential Energy." The other type of energy is Kinetic Energy.
What is Potential Energy?Potential energy is energy stored in chemical bonds. Potential energy is the energy associated with an object due to its position or structure. For example, the energy in a molecule's chemical bonds is related to the structure of the molecule and the positions of its atoms relative to one another. Potential energy can be seen in everyday situations such as the energy held behind a dam or a person about to skydive out of an airplane.
On the other hand, kinetic energy is the energy associated with an object’s motion. Kinetic energy can be found in anything that moves around us. Walking, soaring, falling, flying, and throwing are all examples of kinetic energy.
Here to learn more about Potential Energy:
https://brainly.com/question/14427111
#SPJ4
The human body can breath in over 6.70 x 10^22 molecules of oxygen (O₂) a second. How many liters is this, if you are at STP?
The volume that is occupied is 22.4 L
What is the definition of the mole?The mole allows for the conversion of the mass of a substance to the number of entities it contains, and vice versa, through the use of its molar mass, which is the mass of one mole of the substance. The mole is a convenient unit for expressing amounts of substances in chemical reactions, as it provides a way to relate the mass of a substance to its number of entities, such as atoms or molecules.
If one mole of oxygen contain 6.02 * 10^23 moles
x moles would contain 6.70 x 10^22 molecules
x = 1 mole
Then the volume that is occupies is 22.4 L
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
How many grams of salt (NaCl) do you need to make 200 mL of a 0.5M solution? The molar mass of NaCl is 58.44 g/mol.
The mass (in grams) of the salt (NaCl) needed to make the 200 mL of the 0.5 M solution is 5.844g
How do I determine the mass of the salt (NaCl) needed?First, we shall determine the mole of the salt (NaCl). Details below:
Molarity of solution = 0.5 MVolume = 200 mL = 200 / 1000 = 0.2 LMole of salt (NaCl) =?Mole = Molarity × volume
Mole of salt (NaCl) = 0.5 × 0.2
Mole of salt (NaCl) = 0.1 mole
Haven obtain the mole of the salt, we shall determine the mass of salt (NaCl) needed to make the solution. This is shown below:
Mole of salt (NaCl) = 0.1 moleMolar mass of salt (NaCl) = 58.44 g/molMass of salt (NaCl) = ?Mass = Mole × molar mass
Mass of salt (NaCl) = 0.1 × 58.44
Mass of salt (NaCl) = 5.844g
Thus, the mass of the salt (NaCl) needed is 5.844g
Learn more about mass:
https://brainly.com/question/18567552
#SPJ1
A greenhouse is filled with air that contains more carbon dioxide that normal air has. How might phtosynthesis and plant growth be affected?
A greenhouse is filled with air that contains more carbon dioxide that normal air has. The phtosynthesis and plant might growth be affected is can potentially lead to faster plant growth and increased rate of photosynthesis
Plants rely on photosynthesis to create energy, which they use for growth and other cellular functions. Photosynthesis is the process by which plants convert carbon dioxide and water into glucose and oxygen using energy from the sun. When a greenhouse is filled with air that contains more carbon dioxide than normal air, the rate of photosynthesis can increase, leading to faster plant growth.
However, it is important to note that there are other factors that affect plant growth and photosynthesis, such as the availability of water and nutrients, and the intensity and duration of sunlight. If these factors are not optimal, an increase in carbon dioxide alone may not lead to faster plant growth. In conclusion, a greenhouse filled with air that contains more carbon dioxide than normal air can potentially lead to faster plant growth and increased rates of photosynthesis, but other factors such as water, nutrients, and sunlight must also be considered.
Learn more about photosynthesis at:
https://brainly.com/question/29775046
#SPJ11
Select the gas with the highest average kinetic energy per mole at 298 K.
a. hydrogen
b. carbon dioxide
c. water d. oxygen e. they all have the same kinetic energy
All of them have the same kinetic energy, with 298 K having the highest average kinetic energy per mole.
Kinetic energy is the energy of motion. Any object that is moving possesses kinetic energy, and the amount of energy it has is proportional to its mass and velocity. The formula for calculating kinetic energy is KE=1/2mv^2, where m is the mass of the object and v is its velocity. The kinetic energy of an object can be transformed into other forms of energy, such as potential energy, heat, or work. In physics, kinetic energy is an important concept that is used to describe the behavior of moving objects and their interactions with other objects or systems. Examples of kinetic energy in everyday life include a moving car, a swinging pendulum, a bouncing ball, or a running athlete. Understanding kinetic energy is essential for many fields of science, such as mechanics, thermodynamics, and electromagnetism.
Learn more about Kinetic energy here:
https://brainly.com/question/12450160
#SPJ4
in the reaction used to determine the molar volume of gas, what is the stoichiometric ratio between the mg ribbon reactant and the hydrogen gas product?
As a result, the stoichiometric ratio between the reactant, mg ribbon, and the product, hydrogen gas, in the reaction used to calculate the molar volume of gas is 1:1.
What is molar volume give example?One mole of a substance occupies a certain amount of space (designated by the symbol Vm) at a specific temperature and pressure. It is determined by dividing the substance's molecular mass (M) by its density () at the specified temperature and pressure. The SI unit for it is the cubic meter per mole (m3/mol). Cubic meters per mole (m3/mol) is the SI unit for molar volume. The moles per liter of a solution—the measurement of concentration molarity—are referred to as "molars" in this context. The phrase is most frequently used in chemistry to refer to a solute's molar concentration in a solution. Molar concentration is measured in mol/L or M.
Why is molar volume used?Thinking about things from the a molecular perspective is a beneficial quality. All perfect gases will have the same molar volume since they all have the same number density. This will be 22.4 L at STP. This is helpful if you want to visualize the separation of molecules in various samples.
A form's volume is essentially equal to the product of its area and height. Volume = Height x Base Area.
To know more about Molar Volume visit:
https://brainly.com/question/29884686
#SPJ4
How is magnesium bromide formed?
Magnesium bromide is obtained by: Hydrobromic acid (HBr) is treated with magnesium oxide (MgO) and the product crystallizes. It is also synthesized by the reaction of magnesium carbonate (MgCO₃) and hydrobromic acid (HBr).
Magnesium bromide is a compound composed of bromine and magnesium. The molecular formula or chemical formula of magnesium bromide is MgBr₂. It can be manufactured in the following way.
Magnesium bromide can be synthesized by treating magnesium oxide (and related basic salts) with hydrobromic acid.It can also be obtained by reacting magnesium carbonate with hydrobromic acid and collecting the solid remaining after evaporation.It is then evaporated and a solid residue is collected. It is soluble in water and partially soluble in alcohol. In nature, it can be found in small amounts in some minerals.
To learn more about magnesium bromide, visit :
https://brainly.com/question/11050230
#SPJ4
What is becl2 polar or nonpolar ?
BeCl₂ is a nonpolar molecule.
A molecule can be polar or nonpolar depending on the arrangement of atoms and the electronegativity difference between them. If the electronegativity difference between two atoms is greater than 0.4, the bond between them is considered polar.
In the case of BeCl₂, the molecule has a linear shape with the two chlorine atoms bonded to the central beryllium atom.
The electronegativity difference between beryllium and chlorine is 1.5, which indicates that the bonds are polar. However, because the molecule is linear, the dipole moments of the two polar bonds cancel out, resulting in a nonpolar molecule.
BeCl₂ is a nonpolar molecule because the dipole moments of the polar bonds cancel out due to the molecule's linear shape.
To know more about polarity here:
https://brainly.com/question/3184550#
#SPJ11
Does Cl have high electronegativity? how much?
Yes, the Chlorine Cl have the high electronegativity. The electronegativity of the chlorine is 3.16.
The chlorine that is the Cl has the very high electronegativity this is because it has the seven electrons in its valence shell or the outermost shell and it only needs one electron to become more stable like the noble gas. The chlorine has the tendency to attract the electrons towards itself.
The Electronegativity is the chemical property that will describes the tendency of an atom or the functional group to attract the electrons toward itself. The value of the electronegativity of the chlorine is 3.16 and this is the high electronegativity value.
To learn more about electronegativity here
https://brainly.com/question/17762711
#SPJ4
An NaCl solution is prepared by dissolving 50.0 g NaCl in 200.0 g ofwater at 25"C What is the vapor pressure of the solution if the vapor pressure of water at 25*C is 23.56 torr? a.1.574 torr b.1.686 tOrr c.20.41 torr d.0.8744 torr e.21.87 torr
The vapor pressure of the solution if the vapor pressure of water at 25 °C is 23.56 torr is 21.87 torr. The correct option is e. 21.87 torr.
The mass of the NaCl = 50 g
The moles of the NaCl = mass / molar mass
= 50 / 58.44
= 0.855 mol
The mass of the H₂O = 200 g
The moles of the H₂O = mass / molar mass
= 200 / 18
= 11.11 mol
The total moles = 11.96 mol
The mole fraction of the water = moles of water / total moles
= 11.11 / 11.96
= 0.928
The vapor pressures of the solution = mole fraction of water × vapor pressure of water
The vapor pressures of the solution = 0.928 × 23.56
= 21.87 torr
To learn more about vapor pressure here
https://brainly.com/question/29640321
#SPJ4
How do you balance this chemical equation:
CaCO2 = CaO + CO2
In other words, the mass as well as charge across both sides of the reactions are balanced. Therefore, the balanced equation is CaCO[tex]_3[/tex]→ CaO + CO[tex]_2[/tex].
What is balanced equation?A balanced equation is indeed a chemical reaction equation in which the overall charge and the amount of atoms for every element inside the reaction are the same for both the products and the reactants.
In other words, the mass as well as charge across both sides of the reactions are balanced.
CaCO[tex]_3[/tex]→ CaO + CO[tex]_2[/tex]
The atom oc Ca on reactant and product side is 1.
The atom of oxygen on reactant and product side is 3
The atom of carbon on reactant and product side is 1
Therefore, the balanced equation is CaCO[tex]_3[/tex]→ CaO + CO[tex]_2[/tex].
To learn more about balanced equation, here:
https://brainly.com/question/29109946
#SPJ9
4 Describe how to separate the following. Give a description of the procedure used and explain why this method works. Magnesium hydroxide from a mixture of magnesium hydroxide and zinc hydroxide. procedure. explanation... [3] [Total: 3]
Magnesium hydroxide can be separated from a mixture of magnesium hydroxide and zinc hydroxide by adding more hydroxide (NaOH) then filter off the liquid containing the zinc, all you will have left is solid magnesium hydroxide.
What is Filtration?This is referred to as a process of separating a solid from a fluid through a porous material that holds the solid and fluid passes through.
Adding more hydroxide (NaOH) then filter off the liquid containing the zinc, all you will have left is solid magnesium hydroxide.The zinc will form the (Zn(OH)) and go into solution leaving the magnesium hydroxide untouched. If you filter off (or simply decant) the liquid containing the zinc, all you will have left is solid magnesium hydroxide.
Read more about Filtration here https://brainly.com/question/23945157
#SPJ1