Answer:
4.51 x 10 to the 23 power
Explanation:
how to tell if something is a strong or weak acid or base
Answer:
It basically depends upon the pH value of that acid or Base. That's how you can determine whether the substance is a strong or weak acid/base. We have a pH scale ranging from 1 to 14, where 7 is the neutral point. Any substance having a pH of 7 means it is neither an acid nor a Base, but neutral in nature, such as water([tex]H_{2}O[/tex]). Now, if the pH is less than 7, the substance is an acid, similarly if the pH is more than 7, it is a base. As the pH DECREASES, the substance becomes more acidic, on the other hand as the pH INCREASES, the substance becomes more basic. This way you can compare between pH values of two substances and tell which one is stronger or weaker.
For Acids:
If a substance's pH is between 1 and 7 it is an acid. If it is more towards 1, it's a strong acid and if it's more towards 7 it is a weak acid.
For Bases:
If a substance's pH is between 7 and 14 it is a base. If it is more towards 14, it's a strong base and if it's more towards 7 it is a weak base.
Hope that helps...
what is the equilibrium concentration of co at 1000 k?
Answer: For the reaction, K c = 255 at 1000 K. If a reaction mixture initially contains a CO concentration of 0.1550 M and a Cl 2 concentration of 0.171 M at 1000 K. 1.
Explanation:
It accounts for the differences in the behavior of particles in different states. *
Answer:
Matter
Explanation:
Solids, liquids, and gases are the three types of matter that can be found in the world around us today. In solids, all of the particles are close together. They move more in liquids, but they are spread out in gas.
This is my class group-work with my friends but we are stuck on this question.
Explanation:
It has to be C, because Carbon can bond with four other atoms and is like a four-hole wheel.
(Sorry if my elplanation was kinds choppy Oof, helpfully it makes sense?)
Help me in the 10 the number. Clue- helium and hydrogen make up the first of these
Answer:
helium and hydrogen make up the first of these
the answer is period
If a sample of gas at constant temperature has its pressure doubled, what will happen to its volume?
Answer:
it'll halve
Explanation:
the gas is compressed with twice the pressure. The volume will be halved.
im certain
Match each type of reaction to its amount of potential energy. (PLEASE HELP )
Elements that become cations during bonding become smaller as a result.
A.
True
B.
False
Which models of the atom in task 1 are not supported by the results of the hydrogen gas experiment? For each of these models, explain the experimental results that the model would predict.
Answer:
Thomson placed two magnets on either side of the tube, and observed that this magnetic field also deflected the cathode ray. The results of these experiments helped Thomson determine the mass-to-charge ratio of the cathode ray particles, which led to a fascinating discovery, minus the mass of each particle was much, much smaller than that of any known atom. Thomson repeated his experiments using different metals as electrode materials, and found that the properties of the cathode ray remained constant no matter what cathode material they originated from. From this evidence, Thomson made the following conclusions:
The cathode ray is composed of negatively-charged particles.
The particles must exist as part of the atom, since the mass of each particle is only ~1/2000 the mass of a hydrogen atom.
These subatomic particles can be found within atoms of all elements.
While controversial at first, Thomson's discoveries were gradually accepted by scientists. Eventually, his cathode ray particles were given a more familiar name: electrons. The discovery of the electron disproved the part of Dalton's atomic theory that assumed atoms were indivisible. In order to account for the existence of the electrons, an entirely new atomic model was needed.
Explanation:
Which model of the atom is thought to be true?
A. Protons, electrons, and neutrons are evenly distributed throughout the volume of the atom.
B. The nucleus is made of protons, electrons, and neutrons.
C. Electrons are distributed around the nucleus and occupy almost all the volume of the atom.
D. The nucleus is made of electrons and protons.
Its A. Explanation:I just know
The boiling points of five liquids have been measured 10 times each by a team of scientists, with fairly consistent results. Which next step would be the most logical?
1. Test a sixth liquid to see if it follows patterns in the rest of the data.
2. Use a new thermometer to make sure that the original one was not faulty.
3. Continue collecting data until exact boiling points can be found.
4. Test the results an eleventh time, and average the new trial into the data.
Answer: Test a sixth liquid to see if it follows patterns in the rest of the data.
Explanation:
took the test
Temperature measures the average kinetic energy of particles of the substances. Therefore, the correct option is option A. Temperature is a physical quantity.
What is temperature?Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Heat always flow from higher temperature source to lower temperature source.
We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:
°C={5(°F-32)}÷9
The boiling points of five liquids have been measured 10 times each by a team of scientists, with fairly consistent results. the next step would be to Test a sixth liquid to see if it follows patterns in the rest of the data.
Therefore, the correct option is option A.
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ2
NO LINKS
Select the correct answer.
In which situation is chemical energy being converted to another form of energy?
A.
a lamp plugged into the electric grid
B.
a fluttering flag
C.
a floating wooden log
D.
a burning candle
Perform the following
mathematical operation, and
report the answer to the correct
number of significant figures.
3.22 x 0.17 = [?]
Answer:
0.5474
Explanation:
3.22 x 0.17
\/
322 x 17 = 5,474
[] There are four places "after" the decimal in 3.22 and 0.17 combined, meaning we move the decimal to the right four times in our current answer
-> 5,474 becomes 0.5474
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
Answer:0.55
Explanation:
3.22 × 0.17 calculated with significant figures is 0.55, which has 2 sig figs and 2 decimals. There are 2 steps to calculate 3.22 × 0.17 with sig figs. 0.55 rounded to 1 sig figs is 0.6.
A molecular compound is found to consist of30.4% nitrogen and 69.6% oxygen. Ifthe molecule contains 2 atoms of nitrogen, what is the molar mass of the molecule
Answer:
92.01 g/mol
Explanation:
So first you need to find the empirical formula by the percents. That would be, assuming that you have 100 grams of the the sample, divide each quantity of each element found by its respective molar mass.
30.4 g of N ÷ 14 g/mol N= 2.17 mol of N
69.6 g of O ÷ 16g/mol= 4.35 mol of O
You can establish now the empirical formula.
N2.17O4.35,
but since you can't have a decimal subscript, you divide each subscript by the minimum subscript
NO2
So then you're said that the molecular formula derived from that empirical formula has 2 nitrogen, so you multiply all the subscripts, by 2:
N2O4
-Dinitrogen Tetraoxide
-Nitrogen oxide (IV)
Then all you have to do is find the molecular mass of the compound using the periodic table and what you obtain is the molar mass.
remember: molecular mass is correspondent to molar mass.
is it NaCO3 or Na2CO3?
Which of the following statements is true about atomic spectra? I. The line spectra of elements are evidence that electron energies are quantized II. Energy is emitted from atoms as they move from lower energy levels to higher energy levels III. Energy is emitted from atoms as they move from higher energy levels to lower energy levels IV. Neutral atoms in the ground state emit light spontaneously
The line spectra of an atom offers conclusive evidence that electron energies are quantized.
Neils Bohr showed that electrons in an atom can absorb or emit energy when they move from one energy level to another. This principle is the basis upon which the spectra of atoms is built.
The true statements about the atomic spectra is;
The line spectra of elements are evidence that electron energies are quantized Energy is emitted from atoms as they move from higher energy levels to lower energy levelsLearn more about atomic spectrum: https://brainly.com/question/2049494
Sasha did an experiment to study the solubility of two substances. She poured 100 mL of water at 20°C into each of two beakers labeled A and B She put 50 g of
Substance A in the beaker labeled A and 50 g of Substance B in the beaker labeled B. The solution in both beakers was stirred for 1 minute. The amount of substance
left undissolved in the beakers was weighed. The experiment was repeated for different temperatures of water and the observations were recorded as shown.
Experimental Observations
Mass of Undissolved Substance at Different Temperatures (gram)
20°C
40 °C
60°C
80 °C
Substance
А
12
11
9
8 8
B
45
40
34
31
Part 1: Which substance has a higher solubility?
Part 2: Explain your answer for Part 1
Answer:
Answer temperatures gram is correct because there is more of a mass of numbers and the numbers are higher. (don't really know this subject, just guessing, hope this helped.)
The substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.
What is solubility?The word solubility is defined as the ability of a substance, the solute, to form a solution with another substance, the solvent.
It can also be defined as a property that allow sugar molecule to dissolve.
It can be defined as at a given temperature, the amount of solute that can dissolve in a given amount of solvent.
In this reaction, increasing the pressure and temperature results in increased solubility. An increase in pressure causes more gas particles to enter the liquid, lowering the partial pressure.
For exothermic reaction the temperature increases with decrease in solubility and for endothermic reaction the temperature decreases with increase in solubility.
Thus, the substance A has higher solubility then substance B because the higher the temperature the easier the substance will dissolve.
To learn more about solubility, refer to the link below:
https://brainly.com/question/8591226
#SPJ5
how many atoms of mercury are in 50.15 g of mercury?
Answer:
please mark brainliest
Explanation:
The correct answer to this question is 0.2500 mol
Formula to calculate moles:
Moles = mass ÷ molar mass (n=m/M)
Mass = 50.15g
Atomic mass: 200.59 amu
Moles = 50.15g/200.59
= 0.2500 mol.
__H2 + __SO2 —> __H2S + __H2O identify the proper coefficients
Helppppp asaapppppp plzzzzzz
Answer:
Alright the very first thing you need to do is balance the equation:
2HCl + Na2CO3 -----> 2NaCl + CO2 + H2O
Now we need to find the limiting reactant by converting the volume to moles of both HCl and Na2CO3.
Volume x Concentration/molarity = moles
0.235L x 0.6 M = 0.141 moles / molar ratio of 2 = 0.0705 moles of HCl
0.094L x 0.75 M = 0.0705 moles /molar ratio of 1 = 0.0705 moles of Na2CO3
Since both of the moles are equal, it means the entire reaction is complete (while the identification of limiting reactant may seem like an unnecessary step, it's quite essential in stoichiometry, so keep an eye out) and there is no excess of any reactant.
Now we know that the product we want to calculate is aqueous so, following the law of conservation of mass, we should add both volumes together to calculate how much volume we could get for NaCl.
0.235 + 0.094 = 0.329L of NaCl
Now we apply the C1V1 = C2V2 equation using the concentration and volume of Na2CO3 because it's molar ratio is one to one to NaCl (You can also use HCL, but you have to divide their moles by 2 for the molar ratio) and the volume we just calculated for NaCl.
(0.75M) x (0.094L) = C2 x (0.329L)
Rearrange equation to solve for C2:
(0.75M) x (0.094L) = C2
(0.329L)
C2 = 0.214 M (Rounded)
When the reaction is finished, the NaCl solution will have a molarity concentration of 0.214 M.
12. Draw the dot diagram for a molecule of P2
[show your work and draw a box around your answer]
Explanation:
download the app topper
[tex]\rule{2000pt}{1000000pt}[/tex]
mamama
What happens when a solid is exposed to sub-zero temperatures?
Answer:
A substance may undergo phase change from a solid to a gas or from a gas to a solid if the temperature it is exposed to is changed very quickly. If the temperature around a solid is raised very quickly, it can sublimate, or phase change from a solid to a gas without existing as a liquid.
Explanation:
20 points be right this is my final!!!
calculate the number of atoms in a sample containing 3.5 g of silicon atoms
Answer:
there are 7. 505 x 1022 atoms in 3.5 grams of silicon.
Explanation:
So, 1 mole of silicon will have a mass of 28.0855 g and the number of atoms will be 6.022 x 1023. Therefore, there are 7. 505 x 1022 atoms in 3.5 grams of silicon.
Answer:
1 mole of silicon will have a mass of 28.0855 g and the number of atoms will be 6.022*1023 . Therefore , there are 7.505*1022 atom in 3.5 g of silicon .
people tint their car windows to stop what
Answer:
Reflection
Explanation:
Answer:
b
Explanation:
which particle diagram shown above best represents the strongest intermolecular force between two ethanol, c2h6o, molecules?
The strongest intermolecular bonding in ethanol is hydrogen bonding.
Intermolecular forces are the forces that hold two molecules of a substance together in a given state of matter. For ethanol, the strongest intermolecular force is hydrogen bonding.
Hydrogen bonding occurs when hydrogen is directly linked to a highly electronegative element such as oxygen, nitrogen, fluorine or sulfur. The existence of intermolecular hydrogen bonds accounts for unusual properties such as abnormally high melting and boiling points.
Learn more about intermolecular forces: https://brainly.com/question/17111432
9
Ammonia is manufactured from nitrogen and hydrogen by the Haber process.
N2(g) + 3H2(g)2NH3(g)
What is the percentage yield when 60 kg of ammonia is produced from 60 kg of hydrogen?
A
5.9%
B
17.6%
с
35.3%
D
50.0%
Answer:
B
17.6%
Explanation:
1. Percentage yield = (Actual yield/theoretical yield) x 100
2. You know actual yield of ammonia (60kg) so you need to work out theoretical yield.
3. mols of hydrogen = m/mr = 60,000/2 = 30,000 mols.
4. 3:2 ratio so (30,000/3) x 2 = 20,000 mols of Ammonia.
5. Therefore mass of ammonia = mr x mols = 20,000 x 17 = 340,000 grams
6. So percentage yield is (60,000/340,000) x 100 = 17.6
225 million km to seconds
Answer:
You can't convert km to seconds because they are different units.
How many moles is 2.50 grams of oxygen?
Answer:
Mole is a number that connects mass of a substance with its number of particles. 2500 g of O2 = 1/32 x 2500 = 78.125 moles
Explanation:
have a great day
5. How many grams of calcium carbonate (CaCO3) are needed to maker 1 liter of 2-molar solution?
029
O 100.19
O 50.19
O 200.2g
Answer: Molar masses 40.8 and 100.1
Explanation: