Calculate the amount of time it takes to heat the water by dividing the power used to heat the water, which was determined to be 1.867 with the heater element rating, listed in kW. So if your heater element rating was 3.6 kW, your equation would look like this: heating time = 1.867 ÷ 3.6, or heating time =0.52 hours.
How much force is required to move a rock 75m, when using 340J of work?
Answer:
Solution given:
work done=340J
displacement(d)=75m
force[f]=?
we have
work done =Force*displacement
340=Force*75
Force=340/75
Force=4.5N
Given,
Work done = 340 J
Distance = 75 m
Force = work done / distance
Force = 340 / 75
Force = 4.533 Newton (N)
______
RainbowSalt2222
Two forces are applied to a 50-kg box. One is 60.0
N to the south and the other is 80.0 N to the east.
These are the only forces acting on the box. The
magnitude of the acceleration of the box is:
1. 20m/s^2
2. 1.5 m/s^2
3. 5.2 m/s^2
4. 0.50m/s^2
5. 10m/s^2
The magnitude of the acceleration of the box is 2 m/s².
The given parameters;
mass of the box, m = 50 kgfirst force, F₁ = 60 N southsecond force, F₂ = 80 eastThe resultant of the two given forces is calculated as follows;
[tex]F= \sqrt{F_1 ^2 + F_2 ^2} \\\\F = \sqrt{60^2 + 80^2} \\\\F = 100 \ N[/tex]
The magnitude of the acceleration of the box is calculated as follows;
[tex]F = ma\\\\a = \frac{F}{m} \\\\a = \frac{100}{50} \\\\a = 2 \ m/s^2[/tex]
Thus, the magnitude of the acceleration of the box is 2 m/s².
Learn more about acceleration here:
https://brainly.com/question/17067013
A 1.8 kg book has been dropped from the top of the football stadium. Its speed is 4.8 m/s when it is 2.9 meters above the ground.
A). What is its total mechanical energy? (mechanical energy includes kinetic and gravitational potential)
B). What was the total mechanical energy of the book at the instant it was released?
C). How high is the stadium?
Answer:
Answer:
72.936 Joule
Explanation:
Mechanical Energy = Potential Energy + Kinetic Energy
Kinetic Energy = (1/2) x m x V² = (1/2) x 1.8 x 4.8² = 20.736 J
Potential Energy = m x g x h = 1.8 x 10 x 2.9 = 52.2 J
Total Mechanical Energy = 20.736 + 52.2 = 72.936 Joule
Explanation:
An eraser is tied to a string swung in a horizontal circle. Identify the type of force which causes this object to travel along a circular path.
Answer:
A centripetal force
Explanation:
The type of force in the given scenario is tension. The correct option is c.
What is tension force?Tension is defined in physics as the pulling force conveyed axially by a string, cable, loop, or similar material, or by every end of a rod, truss member, or similar three-dimensional object.
Tension can also be defined as the action-reaction pair of forces acting at each end of said elements.
Newton's second law states that the tension in the rope must equal the weight of the backed mass.
Tension, the normal force, and friction are all examples of contact forces.
Since the weight is not moving, the acceleration is zero. Even if the acceleration is not zero, this equals zero.
Thus, the correct option is c.
For more details regarding tension force, visit:
https://brainly.com/question/2287912
#SPJ2
Your question seems incomplete, the missing options are:
a) gravityb) appliedc) tensiond) normalWhat is the force that makes planets ring around it? ANSWER IT IF YOU ARE SMART
Answer:
gravitational force make the planet move around the sun on its orbit
Answer:
gravitational force makes planets orbit the sun
Calculate the acceleration of a bottle rocket that is traveling at a speed of 74 m/s, and then descends at a speed of 89 m/s. It takes the rocket 5 seconds to change its speed.
a) 1 m/s/s
b) 2 m/s/s
c) 3 m/s/s
d) 4 m/s/s
Answer:Falling objects form an interesting class of motion problems. For example, we can estimate the depth of a vertical mine shaft by dropping a rock into it and listening for the rock to hit the bottom. By applying the kinematics developed so far to falling objects, we can examine some interesting situations and learn much about gravity in the process.
Explanation:
What types of energy do you acquire when you eat a bowl of hot vegetable soup?
Answer:
you need kinetic energy because it is the energy that is used when In motion
The type of energy that one acquire when you eat a bowl of hot vegetable soup is chemical energy.
What is chemical energy?Chemical power the bonds of chemical molecules contain energy. Exothermic reactions are those in which chemical energy is released during the reaction, frequently in the form of heat.
Some of the heat energy needed for a reaction to continue can be stored as chemical energy in newly created bonds.
Food particles go through a chemical reaction that releases chemical energy when we eat it. The body then uses this energy to carry out its regular tasks.
As a result, when you eat a cup of vegetable soup, you also consume the chemical energy it contains.
Thus, the answer is chemical energy.
For more details regarding chemical energy, visit:
https://brainly.com/question/30288262
#SPJ2
a water skier has a mass of 80 kg and accelerates at 2 m/s2. What is the net force(F) acting on him?
Answer:
160 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question
mass = 80 kg
acceleration = 2 m/s²
We have
force = 80 × 2 = 160
We have the final answer as
160 NHope this helps you
What is/are the difference between wavelength and spectral lines?
Answer:
Definition of spectral line: one of a series of linear images formed by a spectrograph or similar instrument and corresponding to a narrow portion of the spectrum of the radiation emitted or absorbed by a particular source.
Definition of Wavelength: can be defined as the distance between two successive crests or troughs of a wave. It is measured in the direction of the wave. ... Wavelength is inversely proportional to frequency. This means the longer the wavelength, lower the frequency.
So, the spectrum is the range of wavelength in visible light. While, wavelength is the length of a wave.
Explanation:
I hope this helps!
To solve a problem using the equation for Kepler’s third law, Enrico must convert the average distance of Mars from the Sun from meters into astronomical units. How should he make the conversion? multiply the average distance by 1. 5 × 1011 multiply 1. 5 × 1011 by the average distance divide the average distance by 1. 5 × 1011 divide 1. 5 × 1011 by the average distance.
The conversion from meters to astronomical units is done by dividing the average distance by 1. 5 × 10^11.
Just as different areas of human endeavor has different units, the unit of length in astronomy is astronomical units. The astronomical unit is defined as the distance between the center of the earth and the sun.
To solve a problem using the equation for Kepler's third law, Enrico must convert the average distance of Mars from the Sun from meters into astronomical units. This is done by dividing the average distance by 1. 5 × 10^11.
Learn more: https://brainly.com/question/17638582
During a ______ Moon phase, the side of the Moon facing Earth isn't reflecting any sunlight from the Sun.
A: Full
B: New
Answer:
B) New
During a new Moon phase, the side of the Moon facing Earth isn't reflecting any sunlight from the Sun.
What is the force on a 2kg object that is moving right at 6 m/s2?
0 3.0N
Ο ΟΝ
.33N
12.0N
Answer:
12N
Explanation:
By Newton second law force is the product of the mass of the object times it's acceleration. That makes it [tex]2\cdot 6 kg \cdot m/s^2 = 12 N[/tex]
What is normal air pressure
Standard sea-level pressure, by definition, equals 760 mm (29.92 inches) of mercury, 14.70 pounds per square inch, 1,013.25 × 103 dynes per square centimetre, 1,013.25 millibars, one standard atmosphere, or 101.325 kilopascals.
You discover a planet orbiting a distant star that has about the same mass as the sun, with an orbital period of 53 days. What is the planet’s orbital distance?.
Answer:
G M1 m1 / R1^2 = G M2 m2 / R2^2 gravitational equation
We can try Kepler's harmonic law
P2^2 = K R2^3
P1^2 = K R1^3 for earth
(P2 / P1)^2 = (R2 / R1)^3 dividing equations
R2^3 = (P2 / P1)^2 * R1^3
R2^3 = (53 / 365)^2 * R1^3
R2^3 = .145 R1^3
R2 = .526 R1
If one uses 93E6 miles as distance of sun from earth then
R2 = 49E6 miles
CAN YALL GO FOLLOW MY INS PLSS yeabdagod
Answer:
just followed :)
Explanation:
please answer right please
Answer:
i think its A
Explanation:
I hope this helps :)
which color of light, red or blue, travels faster in crown glass?
Answer:
Red
Explanation:
The index of refraction for red light in crown glass is smaller than the index of refraction for blue light, which means the speed of red light is larger than the speed of blue light in crown glass.
You push a 24.7 kg toy wagon at a speed of 9.7. What is the momentum of the wagon?
Answer:
Momentum = 239.59 kg·m/s
Explanation:
Mass x Velocity = Momentum
A hummingbird flies 6 m along straight path upon spotting flower below it drops directly downward 8 m
What is the displacement and its direction?
Answer:
10m South East
Công thức cộng vận tốc
Answer:
you are very kind except for your habit
what is faster?
A. train
B. bus
C. airplane
D. boat
Answer:
airplane
Explanation:
Answer:
a plane would go by far the fastest
Explanation:
it would be airplane ,train, boat, bus
The drag force on a falling coffee filter can be modeled as a linear function with respect to velocity, F⃗ D =−bv, where b is a positive constant related to the surface area and shape of the coffee filter. The teacher demonstrates how the value of constant b can be determined by releasing coffee filters from rest and having them fall toward a motion detector, as shown. The students repeat the activity and use the motion detector to measure the position, velocity, and acceleration of different coffee filters as they fall. Which of the following would provide the data needed to determine the value of b ?
Newton's second law and graphical analysis allow us to find the correct answer for the measure of the constant b is:
D) Stack several filters to change the mass measure the acceleration of the system.
Newton's second law establishes a relationship between the net force, the mass and the acceleration of the bodies.
∑ F = m a
Where the bold letters indicate vectors, F is the force, m the mass and the acceleration of the body.
They indicate that the drag force on the filters is
F = - b v
Where b is a positive constant that depends on the shape and area of the filter and v is the speed of the filter.
Let's write Newton's second law.
W - fr = ma
W -bv = ma
In the experiment the students indicate that they can measure the position, velocity and acceleration of the body.
Based on the above, if we place several filter weights and measure their speed and acceleration in each case, we can make a graph of velocity versus acceleration, we can take the value of the constant b from the slope.
Let's analyze the different answers:
A) False. The constant b depends on the shape of the filter therefore it must be kept constant.
B) False. The constant depends on the area, so it must be kept constant.
C) May be. In this case, since we have the terminal velocity, the acceleration is zero, Newton's second law remains.
B v - W = 0
b = [tex]\frac{W}{v}[/tex]
The problem with the method is the difficulty of measuring the compression terminal velocity.
D) True. According to the discussion of the velocity versus acceleration. graph, the constant b is equal to the slope of the graph.
E) May be. The problem with this method is finding a reliable value for the terminal velocity.
In conclusion, using Newton's second law and graphical analysis we can find the correct answer for the measure of the constant b is:
D) Stack several filters to change the mass measure the acceleration of the system.
Learn more here: brainly.com/question/2441565
When waves are closer together and there are more waves, then the wave has a higher ____________.
Answer:
frequency
Explanation:
the closer the waves are the higher the pitch of the sound.
A champion weight lifter raises a 240 kg barbell a distance of 2.1 m. How much potential energy has
the barbell gained?
Answer:
Your answer is below …….
Explanation:
25. Brutus, a champion weightlifter, raises
240 kg of weights a distance of 2.35 m.
a. How much work is done by Brutus
lifting the weights?
W=Fd=mgd
= (240 kg)(9.80 m/s2)(2.35 m)
= 5.5 x 103j
b. How much work is done by Brutus
holding the weights above his head?
d=0, so no work
c. How much work is done by Brutus
lowering them back to the ground?
d is opposite of motion in part a, so
W is also the opposite, -5.5 x 103 J.
d. Does Brutus do work if he lets go of
the weights and they fall back to the
ground?
No. He exerts no force, so he does
no work, positive or negative.
If Brutus completes the lift in 2.5 s.
how much power is developed?
* = multiply
[tex]P = \frac{W}{t} = \frac{5.53 * 10x^{3} J}{2.5s} = 2.2 kW[/tex]
_____________________________________
(Hope this helps can I pls have brainlist (crown)☺️)
Part 1: A flower has 26 chromosomes. To create a new flower, how many chromosomes would a sperm cell have? What is this process called? Part 2: Within a flower cell that has 26 chromosomes, how many chromosomes would a cell that is created within the stem of a flower as it grows, have? What is this process called?
Answer/Explanation:
Part 1: 13 chromosomes.
Reproductive cell, male or female, whose nucleus contains only one chromosome of each pair (they are said to be haploid n = 13) and which unites with the gamete of the opposite sex (fertilization) to give birth to an egg (zygote 2n = 26 ) diploid resulting from the association of the two gametes with each his half of the genetic capital.
2. The process of creating a new flower is called reproduction.
Human reproduction is the process by which a man and a woman engender a new individual. It is a method of sexual reproduction.
Sexual reproduction requires:
Cells carrying parental genes, gametes: eggs and spermatozoa generated by meiosis.The encounter between male and female gametes: fertilization.If the depth of water in a well is 10m, what is the pressure exerted by it the bottom of the well ? ( Use g = 10 m/s2)
show the process as well
Answer:
The precise answer depends on the density and therefore the temperature of the water, but we can obtain a reasonable approximation by assuming that the density of the water is 1000 kilograms per cubic meter (kg/m³).
Since the depth of the water in the well is 10 m, the volume of water directly above an area A of a square meters (m²) at the bottom of the well is 10×a m³.
Since the density of the water is 1,000 kg/m³, the mass of water directly above area A is (1,000 kg/m³) × (10×a m³) = (1000×10×a kg) = 10,000×a kg.
Since g = 9.8 m/s², the force of gravity acting on the water directly above area A is (9.8 m/s²) × (10,000×a kg) = 9.8×10,000×a N (newtons) = 98,000×a N.
So the pressure of water acting on area A is (98,000×a N)/(a m²) = (98,000×a)/a N/m² = 98,000 pascals (pa). And since A could be any given area at the bottom of the well, this is the pressure at any point at the bottom of the well.
So the pressure at the bottom of the well is 98,000 pascals (or 98,000/101,325 standard atmospheres = 560/579 atmospheres ~ 0.967 standard atmospheres).
Please comment below if you have any questions.
Josh tests an unknown liquid substance using litmus paper. When he compared the used litmus paper to a pH scale, the color matches with a 3.5 of the scale. What kind of substance did Josh test?
Answer:
acid
Explanation:
because ph below 7 is acid
how do i do this question in science?
simple subtract and ummmmmm.....
a metal wire has a resistance of 13.00 at a temperature of 25.0 degree celsius
Explanation:
what exactly are you asking for?
Which is the force that results from use of a machine?
O a. input force
Oc. input work
Ob. output force
Od. output work
Answer:
D. Output force
Explanation:
The input force is the effort used to run the machine and this results in an output force.