How many ions would you expect MgBr2 to break down into in water?2314

Answers

Answer 1

When MgBr2 is dissolved in water, it would break down into three ions.MgBr2 is an ionic compound consisting of one magnesium cation (Mg2+) and two bromide anions (Br-).

When MgBr2 is dissolved in water, the water molecules surround and separate the ions from each other. This process is known as hydration. The magnesium cation has a charge of +2, while the bromide anions have a charge of -1 each. Therefore, to achieve overall electrical neutrality, two bromide ions are required for every magnesium ion.

In water, the magnesium cation and bromide anions dissociate from the solid compound and become hydrated, surrounded by water molecules. Since there are two bromide anions per magnesium cation in MgBr2, the compound would dissociate into three ions: one magnesium ion (Mg2+) and two bromide ions (2Br-). Therefore, when MgBr2 is dissolved in water, it would break down into three ions.

Find  more about  MgBr2

brainly.com/question/27249833

#SPJ4


Related Questions

The heat released when 1. 00 g of ethanol (mr = 46. 0) undergoes complete combustion is 29. 8 kj what is the heat released by each molecule, in joules, when ethanol undergoes complete combustion?.

Answers

The heat released by each molecule, in joules, when ethanol undergoes complete combustion exists [tex]2.28 \times 10^{-18} \mathrm{~J}$[/tex].

How to estimate the combustion of heat?

A substance's heat of combustion, commonly referred to as its calorific value or energy value, is the quantity of heat released when a specific amount of the substance burns.

The number of moles in 1.00 g of ethanol is obtained from;

Mass of ethanol/molar mass of ethanol

Molar mass of ethanol = 46.07 g / mol

Number of moles = 1.00 g} / 46.07 g/mol = 0.022 moles of ethanol

1 mole of ethanol contains 6.022 × 10²³ molecules

0.022 moles of ethanol contains 0.022 moles × 6.022 × 10²³ molecules / 1 mole

= 1.32 × 10²² molecules of ethanol

If 1.32 × 10²² molecules of ethanol release 29.8 × 10³ J of heat

1 molecule of ethanol will release 1 molecule [tex]$\times 29.8 \times 10^{3} \mathrm{~J} / 1.32 \times 10^{2 2$[/tex] [tex]=2.28 \times 10^{-18} \mathrm{~J}$[/tex]

Therefore, the heat released by each molecule, in joules, when ethanol undergoes complete combustion is [tex]2.28 \times 10^{-18} \mathrm{~J}$[/tex].

To learn more about combustion of heat refer to;

https://brainly.com/question/25109613

#SPJ4

proton a couples to proton b. proton a posseses a j-value of 3.0 hz. what do you expect the j-value proton b posseses to be?

Answers

We would expect the J-value of proton B to also be 3.0 Hz.

What is the J-value constant?

In nuclear magnetic resonance (NMR) spectroscopy, J-value (also known as J-coupling or coupling constant) refers to the strength of the magnetic interaction between two neighboring nuclei. It is measured in Hertz (Hz) and represents the frequency difference between two energy states of the coupled nuclei.

J-coupling arises from the interaction between the magnetic moments of two nuclei when they are bonded to the same carbon atom in a molecule. The magnitude of the J-coupling constant depends on the distance and bond angle between the nuclei, as well as the electron distribution in the molecule.

If proton A couples to proton B with a J-value of 3.0 Hz, then proton B should also couple to proton A with the same J-value. This is because the J-coupling constant describes the strength of the interaction between the two coupled nuclei and is independent of which nucleus is being observed.

Therefore, we would expect the J-value of proton B to also be 3.0 Hz.

To learn more about the J-value constant:

https://brainly.com/question/21659935

#SPJ4

Classify the steps involved in the formation of a solution as being endothermic or exothermic. Drag the item to the appropriate bin.

Answers

Steps which are involved in formation of a solution as endothermic are separation of solute molecules ,separation of solvent molecules and exothermic is formation of solute-solvent interactions.

In thermochemistry, an exothermic response is a "reaction for which the general standard enthalpy change ΔH° is negative." Exothermic responses normally discharge heat. The term is frequently mistaken for exergonic response, which IUPAC characterizes as "... a response for which the general standard Gibbs energy change ΔG° is negative."

A firmly exothermic reaction will as a rule likewise be exothermic on the grounds that ΔH° makes a significant commitment to ΔG°. The greater part of the fantastic substance responses that are exhibited in study halls are exothermic and endothermic. The inverse is an endothermic reaction, which ordinarily takes up heat and is driven by an entropy expansion in the framework.

To know more about exothermic reaction ,visit here:

https://brainly.com/question/10373907

#SPJ4

what is the brf3 molecular geometry?

Answers

The BrF₃ molecular geometry is the T-shaped or the Trigonal Bipyramidal .

The BrF₃ has the molecular geometry that is said to be the T-shaped or the Trigonal Bipyramidal with the bond angle of the 86.2° which is the slightly smaller than the usual of 90°.This angle formed because of the repulsion that is generated by the lone pair of the electrons which is the greater than that of the Br-F bonds.

The hybridization of the BrF₃ molecule is the sp³d hybridization type . It is the example of the AX5 type of the molecule because it has the two lone pairs and the three bonded pairs of the electrons.

To learn more about molecular geometry here

https://brainly.com/question/30185738

#SPJ4

What is the molecular shape of IF5?

Answers

That’s the molecular shape

classify each phrase as describing an enzyme, an active site, or a substrate?

Answers

The region of the enzyme where the substrate attaches is referred to as the active site because this is where the catalytic "activity" occurs.

What is meant by Enzymes?With the aid of these amino acids, chemical processes can be facilitated by the active site of an enzyme being able to selectively attach to its substrate or substrates. To catalyze a reaction, an enzyme will adhere to (bind) one or more molecules of the reactant. These compounds are the enzyme's substrates. In some reactions, one substrate might split into many products. After that, the byproducts leave the enzyme's active site.Enzymes are biological catalysts that speed up the biochemical reactions in living things. The equilibrium of the process is unaffected by enzymes.The enzymes take the substrate and turn it into the product. When they bind to the active site of the substrate, the enzymes produce the enzymes substrate complex.

The complete question is:

Classify each phrase as describing an enzyme, an active site, or a substrate.

a. A biological catalyst

b. A protein containing an active site

c. A specific enzyme location that binds with the substrate

d. A substance that the enzyme acts upon

e. May be a phosphate group

To learn more about Enzymes, refer to:

https://brainly.com/question/2536131

#SPJ4

Label the oxidation-reduction and ion-exchange processes involved in the diagram with suitable equations.​

Answers

The oxidation-reduction and ion-exchange processes involved in the diagram are as follows:

oxidation-reduction: Ca ---> CaOoxidation-reduction: Ca ---> CaCl₂ ion-exchange: Ca(OH)₂ ---> CaCl₂ ion-exchange: CaCl₂ ---> AgCl

What are oxidation-reduction reactions?

Oxidation-reduction or Redox reactions involve a shift in the oxidation state of the substrate. When electrons are lost or the oxidation state increases, it is called oxidation; when they are gained or the oxidation state decreases, it is called reduction.

Ion exchange is a chemical reaction in which different ions with similar charges in solution are swapped for free mobile ions of a solid, the ion exchanger.

Learn more about oxidation-reduction reactions at: https://brainly.com/question/21851295

#SPJ1

Explain whether the formula cuo can be used to represent both copper(i) oxide and copper(ii) oxide.

Answers

CuO is the proper symbol for copper II oxide. Both the copper and the oxygen in the combination have valences of 2.

What is meant by compound's formula?

A compound's chemical formula serves as a representation of its chemical make-up. The components that make up a compound's molecules as well as the ratio in which their atoms join to produce those molecules are revealed by the chemical formula.

Both copper I oxide and copper II oxide cannot be represented by the formula CuO.

An ionic compound's formula takes into account the metal cation's valency and oxidation state, which are typically represented by a Roman numeral in the compound's name.

Cu2O is a more accurate depiction of the complex copper I oxide. This demonstrates that copper has a valency of 1 in the combination and oxygen has a valency of 2.

CuO is the proper symbol for copper II oxide. Both the copper and the oxygen in the combination have valences of 2.

To learn more about compound's formula refer to:

https://brainly.com/question/13058832

#SPJ4

A pipet is used to measure out 10 mL of water. If the mass of this volume of water is 9.990 g and the density of water is given as 0.9978 g/mL, what is the actual volume of water measured out?
A. 10.000 mL
B. 9.990 mL
C. The actual volume measured out is impossible to tell
D. 10.012 mL

Answers

A pipet is used to measure out 10 mL of water. If the mass of this volume of water is 9.990 g and the density of water is given as 0.9978 g/mL, then the actual volume of water measured is 10.012 mL. The correct answer is D.

The question gives us the mass and density of the water, and asks us to find the actual volume of water measured using a pipet. To do this, we can use the formula for density, which relates the mass and volume of a substance, and is given by the following formula:

density = mass/volume

Rearranging this formula, we get:

volume = mass/density

volume = 9.990 g / 0.9978 g/mL

volume = 10.012 mL

So the actual volume of water measured out is 10.012 mL.

To learn more about density visit: https://brainly.com/question/952755

#SPJ4

What might happen if water molecules did not have a slight negative charge on one end and a slight positive charge on the other? Polar molecule

Answers

If water molecules did not have a slight negative charge on one end and a slight positive charge on the other then Water would be incapable of freezing or boiling.

What is water?

Water is an inorganic polar chemical. At room temperature, it is an odorless and tasteless liquid with a tinge of blue. This most basic hydrogen chalcogenide is unquestionably the most researched chemical compound and therefore is known as that of the "universal solvent" due to its propensity to dissolve a wide range of compounds.

If water molecules did not have a slight negative charge on one end and a slight positive charge on the other then Water would be incapable of freezing or boiling.

Therefore, water would be incapable of freezing or boiling.

To learn more about water, here:

https://brainly.com/question/16630851

#SPJ9

Help pls Which statement ,begin emphasis,best,end emphasis, describes the change that occurs when a gas becomes a liquid?

Answer options with 5 options

A.

There is a decrease in energy which causes a decrease in molecular motion resulting in a decrease in temperature.

B.

There is a decrease in energy which causes a decrease in molecular motion resulting in an increase in temperature.

C.

There is an increase in energy which causes an increase in molecular motion resulting in an increase in temperature.

D.

There is an increase in energy which causes an increase in molecular motion resulting in a decrease in temperature.

E.

There is a decrease in energy which causes an increase in molecular motion resulting in a decrease in temperature.

Answers

Answer:

B

Explanation:

becauuse a decrease in molecular action decrease energy energy leading to increase in temperature temperature

what is the type of polyester that gets formed in the reaction between glycerol and phthalic anhydride?

Answers

The type of polyester that is formed in the reaction between glycerol and phthalic anhydride is known as glycerol phthalate or glyceryl phthalate.

It is a type of thermoplastic polyester that is often used in the production of films, coatings, and adhesives due to its high solubility in many organic solvents. Glycerol phthalate is also commonly used in the pharmaceutical industry as a plasticizer for enteric coatings on oral medications to protect them from the acidic environment of the stomach.

Glycerol phthalate, also known as glyceryl phthalate or glycerol phthalic acid ester, is a type of thermoplastic polyester that is formed by the reaction between glycerol and phthalic anhydride. It is a colorless to pale yellow solid that is soluble in many organic solvents such as acetone, methanol, and chloroform.

Learn more about polyester here:

https://brainly.com/question/11112056

#SPJ4

Which statements describe kinetic and potential energy? Check all that apply.

Answers

Answer:

Question does not show the problem in its entirety

Explanation:

What does the captain do when Dr. Livesey stands up to him in chapters 1-3 of Treasure Island?

A. He takes out a knife and stabs Dr. Livesey.

B. He laughs and pours Dr. Livesey a glass of rum.

C. He takes out a knife, but decides to put it away and does nothing.

D. He pours Dr. Livesey a glass of rum, but throws it in his face, pretending it was an accident

Answers

The captain when Dr. Livesey stands up to him in Chapters 1-3 of Treasure Island, He pulls out a knife, but decides to put it away and does nothing. The correct answer C.

In chapters 1-3 of Treasure Island, when Dr. Livesey stands up to the captain, the captain initially reacts aggressively by taking out a knife. However, he ultimately decides to put it away and does nothing.

This shows that the captain is a volatile and unpredictable character, but also that he is capable of exercising restraint when necessary..

Learn more about Treasure Island:

https://brainly.com/question/265415

#SPJ11

How does proton motive force drive oxidative phosphorylation?

Answers

ATP synthesis is coupled to the proton motive force through oxidative phosphorylation, where a phosphate group is added to ADP.

The proton motive force is also in the transport of various substances across the membrane. Oxidative phosphorylation is dependent on the tricarboxylic acid cycle, and to a lesser extent on pathways such as glycolysis, to provide the "driving force" in terms of NADH and FADH₂ for the electron transport chain. The proton gradient created by proton pumping during the electron transport chain is used to synthesize ATP. When the protons flow through a channel in enzyme, this movement spins the protein, similar to wind drives a turbine. The mechanical movement of these protein roter provides the energy to add an inorganic phosphate group to adenosine diphosphate (ADP) to form ATP.

To learn more about oxidative phosphorylation, refer:

https://brainly.com/question/13254827

#SPJ4

The volume occupied by 9 x 1023 molecules of nitrogen gas at STP is closest to:___________a. 1.5 Lb. 22.4 Lc. 33.6 Ld. 0.5 L​

Answers

The correct solution to this question here is option c. The volume occupied by 9.03×10²³ molecules of N₂ gas at STP is closest to 33.6 L

We'll start by figuring out how many molecules of N2 gas there are in 9.03×10²³ molecules. This is attainable as follows:

From Avogadro's hypothesis

6.02×10²³ molecules = 1 mole of N₂

Therefore,

9.03×10²³ molecules = 1.5 mole of N₂

Finally, we will calculate the volume that 1.5 moles of N2 at STP occupy.

At standard temperature and pressure (STP),

1 mole of N₂ = 22.4 L

Therefore,

1.5 moles of N₂ = 1.5 × 22.4

1.5 moles of N₂ = 33.6 L

Thus, we can conclude that the volume occupied by 9.03×10²³ molecules of N₂ gas at STP is closest to 33.6 L

Therefore the solution is option c which is 33.6L

Learn more about Avogadro's hypothesis here brainly.com/question/12779877

#SPJ4

raffinose and stachyose are examples of what type of complex carbohydrate?

Answers

oligosaccharides. Hope this helps!

What is Henry's law constant?

Answers

Henry's law constant is the constant in henry law that tells about the nature of the gas and other things related to the gas.

A gas law is Henry's law, the partial pressure of a gas above a liquid determines how much of it is dissolved in the liquid. Henry's law constant is the name of the proportionality constant. William Henry, an English chemist, created this rule in the 19th century. Henry's Law may be used to determine the gas's solubility at a new pressure.

P = kC, where P = Gas Pressure.

Henry's Law constant is k.

gas concentration equals C

K describes the gas's characteristics in this passage.

To know more about Henry's law, visit,

https://brainly.com/question/23204201

#SPJ4

What types of molecules do cells use for long-term energy storage? Select all that apply.

Answers

Cells use lipids, such as fatty acids and triglycerides, for long-term energy storage. The correct answer A.

These molecules are broken down in the cells to release energy when needed. Additionally, cells can also store energy in the form of polysaccharides such as glycogen, which can be broken down and used for energy when required.

Lipids are molecules that contain hydrocarbons and are the building blocks of fats, which are the primary form of energy storage in cells. Fatty acids are stored as triglycerides, which are composed of three fatty acid molecules and one glycerol molecule. When these molecules are broken down, the energy stored in them is released and can be used to fuel cell processes.

Complete questions:

What types of molecules do cells use for long-term energy storage? Select all that apply.

A)lipids

B)proteins

C)amino acids

Learn more about molecules :

https://brainly.com/question/475709

#SPJ4

For a 5 mm NMR tube, the solvent should be about ________ cm deep.
A. 4
B. 0.5 - 1
C. 10
D. < 0.5

Answers

For a 5 mm NMR tube, the solvent should be about 4 cm deep. So, correct option is A.

A well prepared  NMR tube solution is significant for obtaining quality spectra.

Decision of Dissolvable:

NMR tests are customarily finished in deuterated solvents, yet you can gather usable spectra in non-deuterated solvents (no-D NMR) also. While choosing a NMR dissolvable, consider:

Dissolvability

The dissolvable's compound shift. Will the leftover dissolvable sign disrupt test resonances. Substance shifts are dissolvable ward, so if you need to contrast your outcomes and a distributed range, ensure you utilize a similar dissolvable.

Dissolvable Virtue:

Numerous deuterated solvents are accessible to buy in the Science stockroom. The "%" esteem on a NMR dissolvable jug alludes to the degree of deuteration, not virtue. On the off chance that you have an especially requesting application you might need to purge the dissolvable. In the event that you have a water-delicate analyte you should dry the dissolvable preceding use. We suggest 3 Å, Linde-type, tube shaped sub-atomic strainers.

The standard round sifters will generally deliver dust, which can prompt shimming issues. Enact the strainers in a drying stove and cool inside a desiccator prior to adding them to your dissolvable. Wrap parafilm around the covers of dissolvable containers to prevent dampness from getting in. Note: Parafilm is great for keeping water out however it won't keep apolar solvents in your cylinder.

Hence,correct option is A.

To know more about NMR ,visit here:

https://brainly.com/question/29584696

#SPJ4

The widely-used raidoactive isotope of carbon 14C has an atomic number of 6, and a mass number of 14. How many neutrons does carbon have? 8 28 20 12 6.

Answers

The radioactive carbon isotope carbon-14 has a nucleus that contains six protons and eight neutrons.

What is meant by radio active isotope?

A chemical element that releases radiation when it decomposes and becomes more stable. Radioisotopes can exist naturally or can be created in a lab. They are utilised in medical procedures such as imaging testing and treatment. also known as a radionuclide.

A radioactive isotope is any of numerous distinct forms of the same chemical element with various weights and unstable nuclei. These isotopes spontaneously generate radiation in the form of alpha, beta, and gamma rays as a result of their instability, which demonstrates a significant amount of energy.

Isotopes are atoms of the same element with differing quantities of neutrons. There are radioactive isotopes of several different elements. Since their nuclei are unstable, they decay and release radiation.

Therefore, the correct answer is option a) 8.

The complete question is:

The widely-used radio active isotope of carbon 14C has an atomic number of 6, and a mass number of 14. How many neutrons does carbon have?

a) 8

b) 28

c) 20

d) 12

e) 6

To learn more about radio active isotope refer to:

https://brainly.com/question/18640165

#SPJ4

For a 0. 00554 mol sample of h2, p = 23. 44 torr and t = 557 k. What is its volume?.

Answers

The volume of a 0.00554 mol sample of H2 at a pressure of 23.44 torr and temperature of 557 K is 44.68 L.

The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. Rearranging this equation for V, we get V = nRT / P. Plugging in the given values, we have:

V = (0.00554 mol)(8.31 J/molK)(557 K) / (23.44 torr x 133.322 Pa/torr)V = 44.68 L

So, the volume of a 0.00554 mol sample of H2 at a pressure of 23.44 torr and temperature of 557 K is 44.68 L.

Learn more about Volume:

https://brainly.com/question/27710307

#SPJ4

Draw structures corresponding to each of the given names. 1. 12-crown-4 2. diethyl ether 3. 2,2,2-trichloroethanal (chloral) 4. trans-3-isopropylcyclohexanecarbaldehyde 5. 5,5-dimethyl-1,3-cyclohexanedione (dimedone) 6. 2-cyclohexenone Provide proper IUPAC names for the following compounds.

Answers

12- Crown- 4,  else called lithium ionophore V and- tetraoxacyclododecane, is a crown ether with the chemical formula C8H16O4.  

It's a lithium cation-specific cyclic tetramer of the chemical  emulsion ethylene oxide. The notable opiate ether,  else called diethyl ether, is a natural chemical that's an individual from the wide group of substances known as ether. Itssub-atomic design comprises of two ethyl bunches joined by an oxygen iota, as in C2H5OC2H5. The chemical  emulsion- trichloroethanol has the formula Cl 3CCH 2OH. Its  flyspeck can measure up to that of ethanol with three chlorine iotas at position 2  rather of the methyl bunch. Dimedone(,5- dimethyl) just responds with sulfenic  sharp and does not respond with  dropped thiol. A flexible delegate used in the development of  colorful chemical  particulars, including  medicines, cyclohexenone is a natural  flyspeck.

to know more about Diethyl ether click here:

brainly.com/question/17650569

#SPJ4

what is a tiny unit of an element that retains the properties of the element.

Answers

An atom is the smallest particle of an element that can retain all its chemical properties.

What is the smallest unit of an element that still retains the element's properties?

Atoms are tiny units that control the property of all materials. They are the building blocks of particles. Atoms are the smallest part of an element that still has the element's properties. An atom of gold is dissimilar from an atom of oxygen an atom is the smallest particle of an element, having the same chemical properties as the bulk element.

The tiny unit of matter that has the characteristic properties of its element is called an “atom”. single atoms are called “elements” for that reason.

So we can conclude that The smallest unit of matter that has the usual properties of its element is called an “atom”. Individual atoms are called “elements” for that reason.

Learn more about elements here: https://brainly.com/question/6258301
#SPJ1

Magnesium chloride crystals can be used by reaction which insuluble base with an acid?

Answers

Magnesium chloride crystals can be formed by reacting an insoluble base with an acid. The reaction can be represented by the following equation:

[tex]Mg(OH)2 + 2HCl → MgCl2 + 2H2O[/tex]

In this reaction, magnesium hydroxide (Mg(OH)₂) is the insoluble base and hydrochloric acid (HCl) is the acid. When these two substances react, they produce magnesium chloride (MgCl₂) and water (H₂O).

The magnesium chloride formed in this reaction is in the form of crystals. The crystals form because the reaction produces an excess of ions, which then attract to each other and form a lattice-like structure. This is known as crystallization. The magnesium chloride crystals are colorless and have a salty taste.

Learn more about Magnesium chloride at: https://brainly.com/question/28193925

#SPJ11

The amount of energy required to remove an electron from an isolated atom or molecule is the ionisation potential. There is an ionization energy for each successive electron removed. (true or false)

Answers

It is True that The amount of energy required to remove an electron from an isolated atom or molecule is the ionisation potential. There is an ionization energy for each successive electron removed.

The ionization potential is defined as the minimum amount of energy required to remove an electron from an isolated atom or molecule in its ground state. The ionization potential is dependent on the atomic or molecular species and the energy required to remove each successive electron generally increases as the number of electrons removed increases. This is due to the fact that as electrons are removed, the remaining electrons are held more tightly by the positively charged nucleus, making it increasingly difficult to remove additional electrons.

Learn more about ionization here:

https://brainly.com/question/28385102

#SPJ4

Mark was told his dinner would be ready at 6:00 he left his house at 12:00 and traveled in his car at an average speed of 45mph to his moms house 300 miles away did mark make it to dinner on time

Answers

Given that he traveled at an average speed of 45mph to his mom's house, Mark did not make it to dinner on time because he arrived at 6:40 pm.

To find out how long it took Mark to travel 300 miles at an average speed of 45mph, we can use the formula:

Distance = Average speed × Time

Rearranging the formula to solve for time, we get:

Time = Distance / Average speed

Plugging in the given values:

Time = 300 miles / 45mph

Time = 20/3 hours = 6 hrs and 40 mins

Since Mark left his house at 12:00, he would arrive at his mom's house at 6:40 (12:00 + 6.67 hours), which is 40 minutes after dinner was supposed to be ready at 6:00. Therefore, Mark did not make it to dinner on time.

Learn more about Average speed here: https://brainly.com/question/6504879.

#SPJ11

A solution is prepared by dissolving 17. 75 g sulfuric acid, h2so4, in enough water to make 100. 0 ml of solution. If the density of the solution is 1. 1094 g/ml, what is the molarity?.

Answers

The molarity of the solution is 0.16 M. To calculate the molarity, we first need to find the number of moles of sulfuric acid in the solution.

To find the number of moles of sulfuric acid, we divide the mass of sulfuric acid by its molar mass:

17.75 g / 98.08 g/mol = 0.18 moles.

The volume of the solution is 100.0 mL, which is equivalent to 0.100 L. So, the molarity of the solution is 0.18 moles / 0.100 L = 0.16 M.

The molarity of a solution is a measure of the concentration of solute in the solution and is expressed in units of moles per liter (M). In this case, the solution contains 0.16 moles of sulfuric acid per liter of solution.

Learn more about Molarity:

https://brainly.com/question/26873446


#SPJ4

12. Calculate the molality of C2H5OH in a water solution that is prepared
by mixing 75.0 mL of C2H5OH with 200.0 mL of H2O at 20°C. The density
of the C2H5OH is 0.789 g/mL at 20°C.

Answers

The molality of C₂H₅OH in the solution is 6.46 m mol/kg.

How do we get the value?

To calculate the molality of the C₂H₅OH solution, we first need to determine the amount of C₂H₅OH in the solution. We can do this by using the volume and density of the C₂H₅OH:

m = V * d

where m is the mass, V is the volume, and d is the density.

V = 75.0 mL = 0.075 L

d = 0.789 g/mL = 0.789 g/L

So,

m = 0.075 L * 0.789 g/L = 0.0592 g

Next, we need to convert the mass of C₂H₅OH to moles. The molecular weight of C₂H₅OH (ethanol) is 46.068 g/mol, so:

mol = m / MW

mol = 0.0592 g / 46.068 g/mol = 0.00129 mol

Finally, we can calculate the molality of the solution using the following formula:

molality = moles of solute / mass of solvent (in kilograms)

The total mass of the water solvent is 200.0 mL * 1.0 g/mL = 200.0 g. To convert this to kilograms, we divide by 1000:

mass of solvent = 200.0 g / 1000 g/kg = 0.2 kg

So,

molality = 0.00129 mol / 0.2 kg = 0.00646 mol/kg = 6.46 m mol/kg

Therefore, the molality of C₂H₅OH in the solution is 6.46 m mol/kg.

learn more about molality: https://brainly.com/question/1370684

#SPJ1

explain what you know about alchemy

Answers

Alchemy is an ancient practice that is considered to be the precursor to modern chemistry. It was primarily concerned with the transmutation of base metals into gold, the creation of a universal solvent or elixir of life, and the discovery of a universal cure for diseases. Alchemists believed that these goals could be achieved through a combination of chemical processes and spiritual practices.



One of the key concepts in alchemy is the idea of the "philosopher's stone," a substance that was believed to have the ability to turn base metals into gold and grant eternal life. Alchemists spent centuries searching for the philosopher's stone, experimenting with various substances and processes in an attempt to create it.


Although alchemy is often considered to be a pseudoscience, it did contribute to the development of modern chemistry. Many of the techniques and apparatus used by alchemists, such as distillation and the use of laboratory glassware, are still used in modern chemistry labs.

Additionally, alchemists were among the first to discover and isolate many chemical elements, such as phosphorus and mercury.

To know more about Alchemy here:

https://brainly.com/question/5997100#

#SPJ11

Other Questions
2. In a bag of fruit Skittles, the ratio of strawberry to orange to lemon-lime is 4: 3:7. There are 56 Skittles in a bag.Find the number of lemon-lime Skittles in the bag. After a Linux user creates a new file, the user can change the group ownership of the file to another group by using which of the following commands? Prove that the sum of the squares of the diagonals of a parallelogram is equal to the sum of squares of its sides. 1-5. Circle the verb. Label the verb transitive or intransitive. Underline direct objects once and indirect objects twice. 1. The airship's crew started the engines. how many moles of NaCl can be produced from 2.5 moles of BaCl2?Pls do step-by-step ellen is preparing to give an important speech at a company conference in which several senior managers will be present. to make sure she avoids embarrassing mistakes or oversights, ellen had decided to read her script from a manuscript. which of the following are methods ellen should use to prepare for her speech? When a firm has ______, it can place more emphasis on other objectives write a program that prompts the user to enter two floating point numbers and an operator ( *, , /, %, -). What happens when an electron moves from a higher energy level to a lower energy level in an atom? What is molar mass of benzoic acid? What shields deflect guardian beams? Which are the following are steps to stimulate the creative process?AResist the urge to question and follow the status quo.BTrust that it will all work out and get sufficient exercise.CLet your mind wander and sleep on it.d Tom wishes to purchase a property that has been valued at $300,000. He has $30,000 available as a deposit, and will require a mortgage for the remaining amount. The bank offers him a 25-year mortgage at 2% interest. Calculate his monthly repayments. Give your answer in dollars and cents. Do not include commas or the dollar sign in your answer. Suppose we have a small inhabited island with three residents and a volcano that generates air pollution. Two people live upwind of the volcano and one person lives downwind. For $21,000 we can clean up the volcano with a patented "smoke guzzler." The two upwind people would pay $1000 each to get rid of the smoke whereas the downwind person would pay $1000 each to get rid of the smoke whereas the downwind person would be willing to pay $15,000. Consider two plans to finance the 'smoke guzzler.' Plan A calls for a head-tax of $7000. Plan B calls for the affected party (the downwind person) to pay $21,000 and everyone else nothing. Compare each plan to the status quo and indicate society's choice using (a) the Pareto criterion; (b) majority rule; (c) potential Pareto improvement. A map of surface ocean currents is shown below.How does the energy provided by the Sun affect global ocean currents?A. The Sun heats the land, which causes currents to flow close to coasts. B. The Sun heats the worlds oceans evenly, which causes currents to flow around.C. The Sun heats waters near the equator, which then move toward the poles where the waters cool.D. The Sun heats waters near the poles, which causes the waters to move toward the equator to cool. Find the height represented by x. using the bsa working solutions created above, how much and which concentration would you pipet into three different centrifuge tubes so you end up with 20 ug, 2 ug, and 0.2 ug of bsa? (note: remember to stay within the accurate range of your pipetman.) In order to keep his opinions balanced, the author provides evidence for both sides of his argument. What is oneexample of evidence he provides that supports why people would not be willing to stay committed to an exerciseregime?ABCDswimming and pumping ironregular trips to the doctorlibrary books and recorded TV showsfeeling depressed. Need ASAP ____ is when an entrepreneur has a strong savings account that can help to keep personal expenses paid during the time it takes the new business to begin bringing in money. a. self-financing self-financing b. loaning money loaning money c. investing investing d. asking friends and family How long does it take for all 7 layers of skin to grow back?