The final mass in gram is (V-5.0)/2 + 10.0 g.
How do we calculate?we need to calculate the mass of the orange layer and add half of that to the 10.0 g test tube to make it float in the middle.
The density of the orange layer can be assumed to be around 1.0 g/mL and we can calculate the volume by subtracting the volume of the test tube (5.0 mL) from the total volume of the mixture.
We make the assumption that the total volume of the mixture is V mL.
Hence, the volume of the orange layer is (V-5.0) mL, and its mass is (V-5.0) g.
Half of the mass = (V-5.0)/2 g
and should be added to the 10.0 g test tube to make it float in the middle.
So in conclusion, the final answer is (V-5.0)/2 + 10.0 g.
Learn more about density at: https://brainly.com/question/1354972
#SPJ1
Elements that have atoms with full outer shells of electrons___
A) will form many compounds.
B) will normally form anions.
C) will normally form cations.
D) frequently form hydrogen bonds.
E) are inert gases
E) are inert gases. Inert gases have full outer shells of electrons, making them unreactive and unlikely to form compounds.
Elements that have full outer shells of electrons, also known as noble gases, are highly unreactive and unlikely to form compounds. This is because their electrons are fully occupied in the outermost energy level, so they have no desire to bond with other elements. As a result, they are referred to as "inert gases". Examples of inert gases include helium, neon, argon, krypton, xenon, and radon. Inert gases are often used in a variety of applications due to their stability and lack of reactivity, such as filling the space inside light bulbs, in cooling and refrigeration systems, and as shielding gases in welding.
Learn more about inert gases here:
https://brainly.com/question/14234951
#SPJ4
Carbon disulfide is an important industrial solvent. It is prepared by the reaction of coke with sulfur dioxide.
5C(s) + 2SO2(g) > CS2(1) + 4CO(g)
- How many moles of carbon are needed to react with 5.44 mol SO 2 ?
It takes 13.6 moles of carbon to react with 5.44 moles of SO₂.
In chemistry, a limiting reagent is a reactant that exists in a finite amount and finishes reacting first. The limiting reagent is used if the number of moles of each reactant is known.
If the number of moles of each reactant is known, the number of moles of the reactant that has been used up or the limiting reagent must be determined. The limiting reagent is useful as a limiter (benchmark) to determine the moles of the reaction product.
In this question:
5C (s) + 2SO₂(g) → CS₂(l) + 4CO(g)
2 moles SO₂. requires 5 moles of C
5.44 moles of SO₂. ......?
Moles of Carbon = 5.44 mol SO2 X 5 mol C/2mol.
Moles of Carbon = 13.6 mol
So, the mole of carbon is 13.6 mol.
Learn more about mole at Vhttps://brainly.com/question/28037816
#SPJ4
A chemist prepares a solution of barium chloride BaCl2 by measuring out 8.1μmol of barium chloride into a 50.mL volumetric flask and filling the flask to the mark with water.
Calculate the concentration in /μmolL of the chemist's barium chloride solution. Be sure your answer has the correct number of significant digits.
Answer:
Explanation:
The amount of barium chloride used is 8.1 μmol and it was dissolved in a 50 mL flask. To find the concentration, we need to divide the amount of solute by the volume of solution:
Concentration = amount of solute / volume of solution
The volume of solution in liters is:
50 mL = 50 × 10^(-3) L = 0.050 L
So the concentration of the barium chloride solution in μmol/L is:
Concentration = 8.1 μmol / 0.050 L
Concentration = 162 μmol/L
Therefore, the concentration of the chemist's barium chloride solution is 162 μmol/L.
the radioactive decay of an isoptope can be modeled by the differential equation where t is mearured in
The answer is "Years". The radioactive decay of Sm-151 (an isotope of samarium) can be modeled by the differential equation dy/dt = -0.0077y, where t is measured in years.
The differential equation dy/dt = -0.0077y models the radioactive decay of Sm-151. This equation shows that the rate of decay is proportional to the amount of Sm-151 present at a given time or points in time. A negative sign indicates that the amount of Sm-151 is decreasing over time.
This equation also shows that the decay rate is 0.0077, which means that when the initial amount of Sm-151 is 100 g, the amount of Sm-151 drops to 99.23 g after one year. This process continues over time and the amount of Sm-151 decreases until it is completely broken down.
TO know more about differential equation:
brainly.com/question/1164377
#SPJ4
Which of these industries provides jobs and boosts the economy through product sales and advertising? (2 points)
Group of answer choices
Communications
Electronics
Tourism
Oil and g
Answer:
All of the industries listed can provide jobs and boost the economy through product sales and advertising. However, "Communications" and "Electronics" are particularly noted for their significant impact in providing jobs and boosting the economy through product sales and advertising. The communications industry includes the telecommunications and media sectors, which generate revenue through product sales and advertising. The electronics industry is a major contributor to the global economy, with products such as smartphones, laptops, and other electronics driving product sales and generating revenue through advertising.
"Tourism" is another industry that can contribute to job creation and economic growth through product sales and advertising, as it involves the sale of travel-related products and services and can generate significant revenue through advertising.
"Oil and Gas" is also an important industry that can provide jobs and boost the economy through product sales and revenue generated from the production and sale of oil and gas products.
mixing sand and gravel and knitting yarn into a scarf
Mixing sand and gravel and knitting yarn into a scarf are examples of physical changes.
What are physical changes?Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.
Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.
Learn more about physical changes,here:
https://brainly.com/question/13216903
#SPJ1
Your question is incomplete, but most probably your full question was mixing sand and gravel and knitting yarn into a scarf is a physical change or chemical change.
Limiting reagent questions. Please show your work for these 5 questions.
1. Potassium superoxide, KO2, is used in rebreathing masks to generate oxygen according to the reaction below. If the mask contains 0.150 mol KO2 and 0.100 mol water, how many moles of oxygen can be produced? What is the limiting reagent?
4KO2(s) + 2H2O(l) → 4KOH(s) + 3O2(g)
2. Suppose 13.7 g of C2H2 reacts with 18.5 g O2 according to the reaction below. What is the mass of CO2 produced? What is the limiting reagent?
2C2H2(g) + 5O2(g) → 4CO2(g) + 2H2O(l)
3. Nitrogen gas can react with hydrogen gas to form gaseous ammonia. If 4.7 g of nitrogen
reacts with 9.8 g of hydrogen, how much ammonia is formed? What is the limiting reagent?
4. One of the most common acids found in acid rain is sulfuric acid. Sulfuric acid is formed when gaseous sulfur dioxide reacts with ozone (O3) in the atmosphere to form gaseous sulfur trioxide and oxygen. The sulfur trioxide forms sulfuric acid when it comes in contact with water. If 5.13 g of sulfur dioxide reacts with 6.18 g of ozone, how much sulfur trioxide is formed? What is the limiting reagent?
5. Another way that sulfuric acid is formed in the atmosphere is when sulfur dioxide reacts with oxygen in a reaction catalyzed by dust in the atmosphere to form sulfur trioxide. If 7.99 g of sulfur dioxide reacts with 2.18 g of oxygen, how much sulfur trioxide can form? What is the limiting reagent?
The limiting reagents are potassium superoxide, carbon dioxide, nitrogen , Sulphur dioxide and oxygen respectively
What are the limiting reagent1.
Potassium superoxide reaction:
4KO2(s) + 2H2O(l) → 4KOH(s) + 3O2(g)
Given: 0.150 mol KO2 and 0.100 mol water
We can start by calculating the amount of moles of oxygen that can be produced from each reactant.
From 0.150 mol of KO2, we can produce:
0.150 mol KO2 * (3 moles O2 / 4 moles KO2) = 0.113 mol O2
From 0.100 mol of water, we can produce:
0.100 mol H2O * (3 moles O2 / 2 moles H2O) = 0.150 mol O2
Since the amount of moles of oxygen that can be produced from the water is larger, we have a surplus of water. Therefore, potassium superoxide is the limiting reagent, and we can produce 0.113 moles of O2.
2.
C2H2 and O2 reaction:
2C2H2(g) + 5O2(g) → 4CO2(g) + 2H2O(l)
Given: 13.7 g of C2H2 and 18.5 g of O2
We can start by calculating the amount of moles of each reactant:
C2H2: 13.7 g / 26.04 g/mol = 0.522 mol
O2: 18.5 g / 32.00 g/mol = 0.580 mol
We can then calculate the amount of moles of CO2 produced from each reactant:
From 0.522 mol of C2H2, we can produce:
0.522 mol C2H2 * (2 moles CO2 / 2 moles C2H2) = 0.522 mol CO2
From 0.580 mol of O2, we can produce:
0.580 mol O2 * (2 moles CO2 / 5 moles O2) = 0.232 mol CO2
Since the amount of moles of CO2 that can be produced from O2 is smaller, we have a surplus of O2. Therefore, C2H2 is the limiting reagent, and we can produce 0.522 moles of CO2. To find the mass, we can multiply the amount of moles by the molar mass of CO2:
0.522 mol * (44.01 g/mol) = 23.0 g CO2
3.
Nitrogen gas can react with hydrogen gas to form gaseous ammonia. If 4.7 g of nitrogen reacts with 9.8 g of hydrogen, how much ammonia is formed? What is the limiting reagent?
We can balance the reaction equation first:
N2(g) + 3H2(g) → 2NH3(g)
Next, we need to convert the masses of nitrogen and hydrogen to moles.
For nitrogen:
moles = mass / molar mass
moles = 4.7 g / 28.0 g/mol = 0.168 mol
For hydrogen:
moles = mass / molar mass
moles = 9.8 g / 2.0 g/mol = 4.9 mol
Since the reaction requires 3 moles of hydrogen for every 1 mole of nitrogen, the limiting reagent will be nitrogen.
The amount of ammonia that can be formed can be calculated using the moles of the limiting reagent.
moles of NH3 = moles of N2 * 2
moles of NH3 = 0.168 mol * 2 = 0.336 mol
Mass of NH3 = moles of NH3 * molar mass of NH3
Mass of NH3 = 0.336 mol * 17.0 g/mol = 5.7 g
So, 5.7 g of ammonia can be formed and nitrogen is the limiting reagent.
4.
One of the most common acids found in acid rain is sulfuric acid. Sulfuric acid is formed when gaseous sulfur dioxide reacts with ozone (O3) in the atmosphere to form gaseous sulfur trioxide and oxygen. The sulfur trioxide forms sulfuric acid when it comes in contact with water. If 5.13 g of sulfur dioxide reacts with 6.18 g of ozone, how much sulfur trioxide is formed? What is the limiting reagent?
We can balance the reaction equation first:
2SO2(g) + O3(g) → 2SO3(g)
Next, we need to convert the masses of sulfur dioxide and ozone to moles.
For sulfur dioxide:
moles = mass / molar mass
moles = 5.13 g / 64.0 g/mol = 0.0801 mol
For ozone:
moles = mass / molar mass
moles = 6.18 g / 48.0 g/mol = 0.1288 mol
Since the reaction requires equal moles of sulfur dioxide and ozone, the limiting reagent will be whichever has the smaller amount, in this case, sulfur dioxide.
The amount of sulfur trioxide that can be formed can be calculated using the moles of the limiting reagent.
moles of SO3 = moles of SO2 * 2
moles of SO3 = 0.0801 mol * 2 = 0.1602 mol
Mass of SO3 = moles of SO3 * molar mass of SO3
Mass of SO3 = 0.1602 mol * 80.0 g/mol = 12.8 g
So, 12.8 g of sulfur trioxide can be formed and sulfur dioxide is the limiting reagent.
5.
Sulfur trioxide is formed when sulfur dioxide reacts with oxygen:
SO2 + 1/2 O2 → SO3
From the given amounts of sulfur dioxide and oxygen, we can calculate the amount of sulfur trioxide that can form:
7.99 g SO2 * (1 mol SO2 / 64.06 g SO2) = 0.1251 mol SO2
2.18 g O2 * (1 mol O2 / 32.00 g O2) = 0.0681 mol O2
We need equal amounts of sulfur dioxide and oxygen for complete reaction, so the limiting reagent is the one with the smaller amount, which is oxygen. The maximum amount of sulfur trioxide that can form is determined by the amount of oxygen:
0.0681 mol O2 * (1 mol SO3 / 0.5 mol O2) = 0.1362 mol SO3
0.1362 mol SO3 * (80.06 g SO3 / 1 mol SO3) = 10.93 g SO3
So, 10.93 g of sulfur trioxide can form from the given amounts of sulfur dioxide and oxygen. The limiting reagent is oxygen.
Learn more on limiting reagent here;
https://brainly.com/question/26905271
#SPJ1
Question 5 of 10
Which molecule is butyne?
нн
| |
А. Н-С=С-c-C-H
нн
О в.
( с.
н с
Н
C=C
CH3
Н
ннннн
() D. H-C-C-с-с-с-н
нннн н
Answer: A
Explanation:
The answer is A.
There are 4 carbon atoms in the carbon chain. There is a triple bond between the first 2 carbons.
The fact that there are 4 carbon atoms and a triple bond makes this butyne.
green plants take in water (h2o) and carbon dioxide (co2) and produce glucose (c6h12o6) and oxygen gas (o2). calculate the molar masses of carbon dioxide, glucose, and oxygen gas. part 1
co2 g/mol part 2 c6h12o6 g/mol part 3
o2 g/mol
Molar mass of H2O = 18 g/mole
Molar mass of O2 = 32 g/mole
Molar mass of glucose = 180 g/mole
What is molar mass?
The molar mass is the substance; it helps to determine the mass of the sample substance to the atom of the sample or substance. The molar mass depends on the molecular formula and the isotopes of the atom. Molar mass is used for the inducement of electric charge. Molar mass is the measurement of the volume of the mass. The molar mass is expressed in the unit of dalton.
What is mole?A mole is the atom's elementary particle, an ion. The mole of the substance is always related to the Avogadro number. The mole is always associated with the weight or mass of the element or substance. The standard unit of a mole is mol. The mole is a significant factor of the reactant and products to form an equation. A mole calculates the atom, ion, and substance weighs.
6CO2 + 6H2O ----> C6H12O6 + 6O2
Atomic mass C = 12 g/mole
atomic mass of O = 16 g/mole
atomic mass of H = 1 g/mole
Thus, molar mass of CO2 = 44 g/mole
Molar mass of H2O = 18 g/mole
Molar mass of O2 = 32 g/mole
Molar mass of glucose = 180 g/mole
Thus, moles of glucose in 0.075 g of it = mass/molar mass = 0.075/180 = 0.00042
number of molecules of aspirin = moles*Avagadro's Number = 0.00042*6.022*1023 = 2.509*1020
239Pu + 4He2+ ------> 240Cm + 3n10
Therefore, Green plants take in water (h2o) and carbon dioxide (co2) and produce glucose (c6h12o6) and oxygen gas (o2), the moles are listed above.
Learn more about molar masses from the given link.
https://brainly.com/question/837939
#SPJ4
Calculate the standard molar entropy of N2(g) at 298 K from its rotational constant B= 1.9987 cm-1 and its vibrational frequency v 2359 cm-1 FYI, the thermodynamic value is 192.1 J/(K mol)
The standard molar entropy of N2(g) at 298 K from its rotational constant B= 1.9987 cm-1 is 192.1 J/(K mol).
What is entropy ?Entropy is a concept in thermodynamics and information theory that measures the amount of disorder in a system. It is typically represented by the letter S, and has units of joules per kelvin (J/K). Entropy is an important concept because it determines how much energy can be used to do work. In thermodynamics, entropy is related to the amount of energy in a system that is unavailable to do work. In information theory, entropy is related to the amount of information in a system. Entropy is also related to the amount of uncertainty in a system. Entropy increases with disorder and decreases with order. Entropy is a fundamental quantity in physics, and it has been used to explain many physical processes. The increase of entropy over time is known as the Second Law of Thermodynamics, and it has important implications for the universe.
Qrot = (2πh/B[tex])^{3/2}[/tex]
= (2π*6.626×10⁻³⁴ /1.9987×10⁻²[tex])^{3/2}[/tex]
= 3.35×10⁻³⁸
Qvib = (hv/RT[tex])^{1/2}[/tex]
= (6.626×10⁻³⁴ *2359*10²/8.314*298[tex])^{1/2}[/tex]
= 5.21×10⁻¹⁷
Standard molar entropy
= 8.314*ln(3.35×10⁻³⁸/5.21×10⁻¹⁷)
= 192.1 J/(K mol)
To learn more about entropy
https://brainly.com/question/24278877
#SPJ4
Wine goes bad soon after opening because the ethanol (CH₂CH₂OH) in it reacts with oxygen gas (0₂) from the air to form water (H₂O) and acetic acid
(CH₂COOH), the main ingredient of vinegar.
What mass of oxygen gas is consumed by the reaction of 2.0 g of ethanol?
Be sure your answer has the correct number of significant digits.
The mass of oxygen gas that is consumed by the reaction of 2.0 g of ethanol would be 1.28 grams.
Stoichiometric problemThe reaction of ethanol with oxygen to form water and acetic acid is shown in the balanced equation below:
[tex]CH_3CH_2OH + O_2 -- > CH_3COOH + H_2O[/tex]
The mole ratio of ethanol to oxygen is 1:1.
The mole equivalence of 2.0 g of ethanol would be:
Mole = mass/molar mass = 2/46.07 = 0.04 mol
Thus, the mole equivalence of oxygen consumed will also be 0.04 mol.
The mass of 0.04 mol oxygen consumed can be calculated as:
Mass = mole x molar mass = 0.04 x 32 = 1.28 grams
In other words, the amount of oxygen consumed would be 1.28 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/14301905
#SPJ1
The water in a garden hose flows at a rate of 10.0 liters per minute. What is the flow rate in gallons per hour? (1gal=3.79L)
The water in a garden hose flows at a rate of 10.0 liters per minute. Therefore, 158 gal/hr is the flow rate in gallons per hour.
What is flow rate?Flow rate is the amount of liquid that travels in a given length of time. Furthermore, the flow rate is affected by the channel through which the liquid is travelling, the area of the pipe, as well as the velocity of something like the liquid. Furthermore, the formula is. Fluid dynamic rate = pipe or channel area x liquid velocity.
The volume flow value is the rate of liquid (water flow rate formula) passing through every place in an area over time.
1 gal = 3.79 L
60 min = 1 hr
10.0 L/min x 60 min/hr x 1 gal/3.79 L = 158 gal/hr
Therefore, 158 gal/hr is the flow rate in gallons per hour.
To learn more about flow rate, here:
https://brainly.com/question/13352319
#SPJ1
An ethylene glycol solution contains 28.2 gg of ethylene glycol (C2H6O2)(C2H6O2) in 92.8 mLmL of water. (Assume a density of 1.00 g/mLg/mL for water.)
Determine the freezing point of the solution.
Determine the boiling point of the solution.
The freezing point of the solution is: 9.19 °C and the boiling point of the solution is: 102.54 °C.
To determine the freezing point of the solution, we can use the equation Δ[tex]T_{f}[/tex] = Kf x molality
The mass of the solvent in the solution is given as 92.8 mL, so we convert it to grams:
mass of solvent = 92.8 mL x 1.00 g/mL = 92.8 g
mass of solvent = 92.8 g / 1000 g/kg = 0.0928 kg
The moles of solute (ethylene glycol) can be calculated using its molar mass:
moles of solute = 28.2 g / (62.07 g/mol) = 0.4556 mol
molality = 0.4556 mol / 0.0928 kg = 4.92 m
And the change in freezing point is:
Δ[tex]T_{f}[/tex] = Kf x molality = 1.86 °C/m x 4.92 m = 9.19 °C
Freezing point of the solution is:
[tex]T_{f}[/tex]= [tex]T_{f}[/tex]- Δ[tex]T_{f}[/tex] = 0 °C - 9.19 °C = -9.19 °C
To determine the boiling point of the solution, we can use the equation ΔTb = Kb x molality
ΔTb =0.52 °C/m x 4.92 m = 2.54 °C
Boiling point of the solution is:
Tb = Tb + ΔTb = 100 °C + 2.54 °C = 102.54 °C
To know more about freezing point here
https://brainly.com/question/30168966
#SPJ4
Does a reaction occur when aqueous solutions of chromium(II) sulfate and sodium phosphate are combined?
Format : _____ + _____ ----> _____
(not a word problem)
Reaction which occurs when aqueous solutions of chromium(II) sulfate and sodium phosphate are combined is that the chemical equation is CrSO₄ + Na₃PO₄[tex]\rightarrow[/tex]Cr₃(PO₄)₂+ Na₂SO₄.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical formula,here:
https://brainly.com/question/29031056
#SPJ1
Fill in the blanksome of the most dangerous conditions occur when temperatures are hovering around ___ degrees fahrenheit, or freezing, when snow begins to turn to watery slush.
Some of the most dangerous conditions occur when temperatures are hovering around 32 °F degrees Fahrenheit, or freezing when snow begins to turn to watery slush.
The three most common forms of exceptionally severe weather are heat waves, cold waves, and tropical cyclones. The increased economic expenses, the loss of human lives, droughts, floods, landslides, and changes in ecosystems are all repercussions that may be seen as a direct result of extreme weather events.
There is evidence to show that climate change is increasing the frequency of some extreme weather events as well as the intensity of those occurrences.
Changes in the frequency or magnitude of extreme heat and cold events are the ones in which the confidence in attributing extreme weather and other events to anthropogenic climate change is highest. There is also some confidence in the attribution of increases in heavy precipitation and increases in the intensity of droughts.
Want to know more about temperature visit the link which is given below;
https://brainly.com/question/11384928
#SPJ4
Iron ore, which is composed of mostly Fe2O3, is converted to cast iron (Fe) in a blast furnace.
The reaction is given below:
Fe2O3 + 3CO
⟶
2Fe + 3CO2
If 159.2 kg of Fe is obtained from 267.5 kg of ore and the percent yield of the reaction is 95.0% , what is the percent of Fe2O3 in the iron ore? Assume that there is enough CO to react with all the Fe2O3.
Molar mass of Fe2O3 = 159.69 g/mol
Molar mass of Fe = 55.85 g/mol
The ability of water to dissolve a large number of different substances relates to which of it's following characteristics?
1. water has a high heat capacity
2. water has a high heat of vaporization
3. water is a solvent
4. water is cohesive
Answer:
water os solvent answer option 3
The general direction in which a graph is moving is called a(n) ________.
The general direction in which a graph is moving is called a trend.
help mee with science
The parts of the Bunsen burner are;
a barrel a collar air holes gas intake gas valvea standP is the air hole and it should be closed before you light the Bunsen burner. This is to ensure that too much air does not enter.
Why is it dangerous to light the Bunsen burner without closing the air hole?Lighting a Bunsen burner without closing the air hole can be dangerous because it can cause the flame to become unstable and flare up, potentially leading to a fire or explosion. The air hole is used to regulate the amount of air that enters the burner and mixes with the gas. When the air hole is open, too much air can enter the burner and cause the flame to become oxygen-rich, which makes it hotter and more unstable.
In addition, an unstable flame can also release harmful byproducts such as carbon monoxide, a toxic gas that can cause headaches, dizziness, and nausea.
Learn more about Bunsen burner:https://brainly.com/question/743920
#SPJ1
provide the product(s) for the following diels-alder reaction. assume that the conditions are irreversible, and be sure to indicate the stereochemistry of the product where applicable.
The Diels-Alder reaction gives a product containing a conjugated diene and a dienophile.
Stereochemistry depends on the arrangement of the substituents on the starting materials - if the dienophile has a cis configuration relative to the diene, the reaction will give a cis product, and if they are in a trans configuration, then the reaction will give a trans product. In an irreversible reaction, the product is a single dienophile, and can be determined by examining the relative configurations of the starting materials. two single-bonded oxygen atoms, with the newly-formed double-bonded oxygen now attached to a hydrogen atom. This new structure is the carboxyl group, which can be seen in the products of the hydrolysis reaction illustrated above.
Learn more about dienophile here:
https://brainly.com/question/24117325
#SPJ4
The diagram below shows a wave with a distance of 6 meters between points A and B. What is the wavelength of this wave?
Answer:
The wavelength of the wave in the diagram is 6 meters. This can be calculated by measuring the distance between points A and B and dividing it by the number of waves. In this case, there is one wave, so the wavelength is equal to the distance between points A and B, which is 6 meters.
An alkyne can be prepared by the reaction of a(n) ______ with a strong base such as NaNH2. Select all that appl
An alkyne can be prepared by the reaction of a vicinal dihalide or geminal dihalide with a strong base such as NaNH2.
This reaction is known as the "halogen exchange reaction" or "halogenation reaction". During this reaction, the halide ions of the dihalide are replaced by the base, resulting in the formation of an alkyne. The reaction typically takes place at room temperature, and can be catalyzed with a Lewis acid such as boron trifluoride (BF3).
The halogen exchange reaction is a useful method for the preparation of alkynes and is widely used in the synthesis of organic compounds.
Learn more about alkyne :
https://brainly.com/question/22933069
#SPJ4
Your friend says to you, “The energy your brain uses to think comes from the sun.” How do you trace energy from the sun to the energy used for your brain cells to work? Write your answer below in complete sentences. PLEASE HELP ME QUICK IM GUNNA FAIL!!!!!!!!!!
The energy from the sun can be traced to the energy used by the brain from the food we consume.
Source of brain's energyThe brain gets its energy from the food we consume while most of the food we consume come from plants or animals that consume plants.
Plants get their own food directly from sunlight through the process of photosynthesis. They are able to convert solar energy from the sun to chemical energy.
When humans consume food, the energy in the food is unlocked and converted to usable energy by the body. This is part of the energy that the brain makes use of.
More on the brain's energy can be found here: https://brainly.com/question/838873
#SPJ1
compare and contrast the cause of a flow of water in a pipe and the cause of a flow of electrons in a wire
The flow of water in a pipe and the flow of electrons in a wire are both examples of fluid flow and are caused by different physical phenomena.
The flow of water in a pipe is caused by a pressure difference, also known as a pressure gradient, between two points. If the pressure at one end of the pipe is higher than the pressure at the other end, water will flow from the high-pressure end to the low-pressure end. The flow rate will depend on the pressure difference, the diameter of the pipe, and the viscosity of the fluid.
The flow of electrons in a wire, on the other hand, is caused by a difference in electrical potential, also known as a voltage difference, between two points. If the voltage at one end of the wire is higher than the voltage at the other end, electrons will flow from the high-voltage end to the low-voltage end. The flow rate will depend on the voltage difference, the resistance of the wire, and the number of electrons available to flow.
In summary, the cause of the flow of water in a pipe is a pressure difference, while the cause of the flow of electrons in a wire is a voltage difference.
Learn more about the flow of electrons here: https://brainly.com/question/13562310
#SPJ4
Hydrogen peroxide with manganese (iv) oxide
Molecular equation, total ionic equation, and net ionic equation
The balanced equation is; 2MnO2 + 3H2O2 + 2OH − →2MnO4− +4H2O
What is the balanced chemical equation?A balanced chemical equation is a chemical equation in which the number of atoms of each element is equal on both sides of the equation. This means that the same number of atoms of each element are involved in the reactants (the starting materials) and the products (the substances formed).
Balancing a chemical equation ensures that the law of conservation of mass is obeyed, as the total mass of the reactants must equal the total mass of the products.
Learn more about reaction equation:https://brainly.com/question/3588292
#SPJ1
A certain liquid sample contains a small amount of dissolved chloroform. Which of the following would be the most effective way to rid the liquid of chloroform? Select the correct answer below: A. Leaving the sample open to the atmosphere in the laboratory B. Chilling the sample in a freezer, and providing an outlet for the gas to flow into a storage container C. Heating the sample gently, and providing an outlet for the gas to flow into a storage container D. Capping the container tightly and shaking it
A certain liquid sample contains a small amount of dissolved chloroform. The most effective way to rid the liquid of chloroform is Heating the sample gently, and providing an outlet for the gas to flow into a storage container. The correct answer is C.
Some of the liquid sample has some dissolved chloroform in it. The best method for removing chloroform from the liquid is to gently heat the sample while creating a passageway for the gas to escape into a storage container.
Allowing the gas to escape and flow into a storage container while gently heating the sample As long as a secure outlet and a container for the gas are offered, heating the sample will enable the chloroform to escape, which is an efficient method of degassing the liquid.
Learn more about chloroform at https://brainly.com/question/17409636
#SPJ4
Is this correct or does this need a decimal?
For conversion degree Celsius into kelvin we have to add the value 273 in given value.The temperature in kelvin of 73°C is 346 K.
What is meant by temperature conversion?A temperature converter helps change over the temperature between Fahrenheit and Celsius scale. Temperature is measured using a thermometer.
While Kelvin (K) is the SI unit of temperature, people generally use Centigrade or Celsius (°C) and Fahrenheit (°F) to measure temperature.
For conversion degree Celsius into kelvin we have to add the value 273 in given value.
We have to convert 73°C into kelvin.
Therefore,
= 73 + 273
= 346 Kelvin
Thus, The temperature in kelvin of 73°C is 346 K.
To learn more about the temperature, follow the link;
https://brainly.com/question/11464844
#SPJ1
Ocean water contains about ___% salt.
a:7
b:5
c:3
When you are at the beach, you are playing in the sand of the _________________.
a: continental shelf
b: sea flor
Answer:
1. C.3
2. A. Continental shelf
Explanation:
Ocean water contains about 3% salt
When you are at the beach, you are playing in the sand of the Continental Shelf
Identify the solute and solvent of soda water. The components are water and carbon dioxide.
The solute is carbon dioxide and solvent is water in soda water.
Soda water is a solution of carbon dioxide (the solute) in water (the solvent). Carbon dioxide is a gas that is dissolved in the water to make the soda water. The carbon dioxide provides the fizz and the water provides the base for the soda.Soda water is a solution of carbon dioxide gas in water.This reaction's chemical equation is:
CO2 + H2O → H2CO3 (carbonic acid)
Soda water, sometimes referred to as seltzer water, is a type of carbonated water. The carbonation comes from the introduction of carbon dioxide gas which is added to the water under pressure. Soda water has a bubbly and slightly acidic taste and is often used as a mixer for alcoholic drinks, as well as for a refreshing drink on its own.
learn more about Soda water Refer:brainly.com/question/23781049
#SPJ4
The water circuit in shell and coil and coil-type tube-in-a-tube condensers must be cleaned ____. a. by removing the end caps
b. with a brush
c. chemically
d. by air pressure
The water circuit in shell and coil and coil-type tube-in-a-tube condensers must be cleaned chemically.
Brass, titanium, stainless steel, ferritic stainless steel, copper-nickel alloys, and these metals are used as tube materials most frequently in condensers.
By adjusting the flow of refrigerant via the condenser, a water regulating valve aids in maintaining the system's head pressure.
Condensers with coils and shells. A coil of finned water tubing is housed inside a welded shell in a shell-and-coil condenser. The hot refrigerant circulates in the shell of this type of water-cooled condenser while the cooling water cools the coils and condenses the refrigerant. In general, it is inexpensive and most portable.
To know more about coil
https://brainly.com/question/12000388
#SPJ4