how many grams of glucose are required to form 180 g of ethanol? express your answer to three significant figures.

Use the mole-to-mole conversion factor (B/A) to convert the mass of A first into moles, then back into grams of A using the mole quantity of B.

A chemical compound is a substance that contains atoms from many chemical elements bonded together by chemical bonds. It is made up of numerous similar molecules. Therefore, a molecule made up of only one type of atom is not a compound.

Examples of compounds are table salt (NaCl), which is generated from the elements sodium and chloride, and water (H2O), which is created from the components hydrogen and oxygen.

Learn more about compounds here:

https://brainly.com/question/26487468

#SPJ1

The pKa for an acid if the [tex]\mathrm{ K_b}[/tex] of its conjugate base is [tex]2.3 \times 10^{-4 }[/tex] is 10.4.

Acid is any chemical substance that has a pH level below 7.0. It is a corrosive substance that can react with other substances and break them down to form new substances. Acids are found naturally in many everyday items such as citrus fruits, vinegar, and yogurt. They can also be created in a lab by combining certain elements in a reaction. Acids have many uses in industries such as metalworking, food processing, and pharmaceuticals. They can also be used in household cleaning products to remove dirt, grease, and other stains. Acids are powerful and should be handled with caution as they can cause burns and other injuries.

At 25° C

[tex]\mathrm{ K_aK_b = 10^{-14 } }[/tex]

[tex]$ \Rightarrow \mathrm{ K_a = \frac{10^{-14}}{2.3 \times 10^{-4 }} }[/tex]

[tex]$ \Rightarrow \mathrm{ K_a = 0.4347 \times 10^{-10 }} }[/tex]

Now,

[tex]\mathrm{ pKa = -\log Ka = 10.4373 }[/tex]

Thus, Option C is correct, The pKa for an acid if the [tex]\mathrm{ K_b}[/tex] of its conjugate base is [tex]2.3 \times 10^{-4 }[/tex] is 10.4.

To learn more about acid

https://brainly.com/question/25148363

#SPJ4

Magnesium metal was separated from benzoic acid in the precipitation stage of the isolation process.

Precipitation is a common method used in chemical separations to form a solid substance from a solution. In this case, magnesium metal was precipitated from a solution containing benzoic acid.

The magnesium metal was likely added to the solution in the form of magnesium oxide or magnesium hydroxide, and an acid was used to react with the magnesium compound to produce magnesium ions and the corresponding anion in solution.

The magnesium ions then combined with a suitable precipitating agent, such as a chloride or sulfate salt, to form solid magnesium metal and a corresponding anion. The solid magnesium metal was then separated from the solution by filtration, leaving the benzoic acid in solution.

To learn more about  Precipitation stage :

https://brainly.com/question/30578061

#SPJ4

The term mole concept is used here to determine the mass of magnesium. The mass of magnesium is  26.3 g. Thus the correct option is B .

One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

The balanced equation when Magnesium and nitrogen react in a combination reaction to produce magnesium nitride is:

3 Mg + N₂→ Mg₃N₂

The mass of magnesium is obtained as follows:

10.1 g N₂ × 1 mol N₂ / 28.02 g N₂ × 3 mol Mg / 1 mol N₂ × 24.31 g Mg / 1 mol Mg = 26.28 ≈ 26.3

Thus the correct option is B - 26.3 g.

To know more about mole concept, visit;

https://brainly.com/question/19730733

#SPJ1

The equation for the decomposition of phosgene gas (COCl₂) to carbon monoxide (CO) and chlorine (Cl₂) is as follows:

COCl₂(g) <=> CO(g) + Cl₂(g)

The equilibrium constant for the reaction can be calculated using the concentration of each species at equilibrium, according to the equation:

Kc = [CO][Cl₂] / [COCl₂]

Since the equilibrium concentration of Cl₂ is 0.045 M, the value of Kc can be calculated as follows:

Kc = [CO][0.045] / [COCl₂]

Note that the concentration of COCl₂ is not known, so the value of Kc cannot be calculated without additional information. To determine the value of Kc, the concentration of COCl₂ at equilibrium is required.

Learn more about equilibrium constant here: https://brainly.com/question/29802105

#SPJ4

The mass of C4H10 that is produced is 8.4 g.

In this case we have to note that the stoichiometry of the reaction is very important and that is what be have to look at in the problem that we have here. For this reason, we need the reaction equation as follows;2C4H10 + 13O2 → 8CO2 + 10H2O

Then we have;

Number of moles of the water = 12.89/18 g/mol

= 0.72 moles

If 2 moles of the C4H10  produces 10 moles of water

x moles of the C4H10  produces 0.72 moles of water

x = 0.144 moles

Mass of the C4H10 = 0.144 moles * 58 g/mol

= 8.4 g

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

The rate of a reaction with a lower activation energy is greater than that of a reaction with a higher activation energy because the lower activation energy means that there is a lower energy barrier for the reaction to occur.

This means that there are more molecular collisions with enough energy to overcome the energy barrier and initiate the reaction. As a result, more product is formed in a shorter amount of time, leading to a higher reaction rate. In contrast, a reaction with a higher activation energy requires more energy for the reaction to occur, meaning that fewer molecular collisions will have the necessary energy to initiate the reaction. This results in a lower reaction rate at a given temperature.

Learn more about activation energy:

brainly.com/question/28384644

#SPJ4

The simplest whole-number ratio of the various atoms in a compound is represented by an empirical formula.

empirical method a chemical formula, rather than listing the total number of atoms in a molecule, shows the most basic ratio of the components in a compound.

The precise number of various atom types present in a compound's molecule is indicated by the molecular formula. The empirical formula for acetylene is CH. The empirical formula for acetylene is C2H2.

Sample mass equals 0.7789 CO2 mass generated = 1.179

Produced mass of to = 0.3179

C mass in the sample equals [tex]12 x 1.17 44, or 0.3199.[/tex]

Its mass in the sample is equal to [tex]2 x 0.317 18 = 0.0359[/tex]

The sample's mass of is given by [tex]0.778-(0.319+0.035) = 0.424 0.319[/tex].

Divide by 12 H 0.035 0.424 mass their molar and [tex]0.319 0.035 \s0.424 16 \s0.027 \s0.035 \s0.027[/tex]

by the smallest number

[tex]0.027 \s0.027 \s0.035 \s0.027 \s0.027 0.027 \s1.3[/tex]

To express the number 3 4 3 in whole numbers, multiply by 3.

To learn more about empirical formula here:

brainly.com/question/14044066

#SPJ4

Answer: Molality

Explanation: Molality measures the number of moles in a solute (per 1kg) in a solvent.

To determine the age of the squirrel bone based on its carbon-14 content, we can use the half-life of carbon-14. The half-life of carbon-14 is 5,730 years. The age of the squirrel bone is half of the half-life, or 5,730 years / 2 = 2,865 years.

If a squirrel bone contains 14 of the carbon-14 of a living squirrel, it means that half of the original carbon-14 has decayed. This means that the age of the squirrel bone is half of the half-life, or 5,730 years / 2 = 2,865 years.

It is important to note that this method of dating only provides an estimate of the age of the bone, and that the actual age may be slightly different due to various factors such as differences in the rate of decay for different isotopes, and variations in the initial carbon-14 content of the bone. Additionally, this method is only applicable to organic materials that were once living, and cannot be used to date inorganic materials or materials that have not been in contact with the atmosphere.

Learn more about carbon-14:

brainly.com/question/4206267

#SPJ4

A sample of the certain monoprotic weak acid was dissolved in the water and titrated with 0.125 M NaOH. The value of ka for the weak acid is 8.572x10⁻⁷.

The molarity = 0.125 M

The volume = 0.016 L

The number of moles = molarity × volume

The number of moles = 0.125 × 0.016

                                    = 0.002 mol

The moles  = molarity × volume

                   = 0.125 × 0.002

                   = 0.00025 mol

The remaining moles = 0.002 - 0.00025

                                     = 0.00175 mol

The Henderson - Hasselbach equation is expressed as :

pH = pKa    + log [(A⁻)/(HA)]

6.912 =  pKa +  log[0.00025/0.00175]

6.912 = pKa  -  0.845

pKa = 6.067

ka = 8.572x10⁻⁷

To learn more about ka here

https://brainly.com/question/14365346

#SPJ4

Answer:

0.833 moles of Phosphorus

Explanation:

100 g C * [tex]\frac{1 mol C}{12g C}[/tex] * [tex]\frac{1 mol P}{10 mol C}[/tex] = 0.833 mol P

If you are experiencing symptoms such as eye or throat irritation after being exposed to the acid vapors, seek medical attention immediately.

If you have spilled concentrated hydrochloric acid, it is important to take immediate action to protect yourself and others:

To know more about hydrochloric acid please refer:

https://brainly.com/question/14519330

#SPJ4

The functional group that behaves as an acid is carboxylic acid.

Functional groups are atoms or groups of atoms that are the active center of a compound, thus determining the physical and chemical properties of the compound.

The functional groups present in amino acids are carboxyl and amine groups. Amino acids are carboxylic acid derivatives that contain an amine group and behave as an acid in a functional group. Each amino acid molecule contains at least two functional groups, namely a carboxyl group (-COOH) and an amine group (-NH2). Based on the structure of these compounds, there are 3 functional groups, namely esters, ketones, and alkenes.

Learn more about the functional group ofalcoholesteracid hydride aldehyde here :

https://brainly.com/question/29263610

#SPJ4

Answer: option A

Explanation:

Answer:

A. a balanced chemical equation that includes the enthalpy change and phase of each reactant and product

Explanation:

took the test.

For a pure substance, if its the liquid and the vapor can coexist in the equilibrium, the liquid-vapor mixture at these states is called as the saturated liquid-vapor mixture. This is true.

A substance that has the fixed chemical composition throughout is called as the pure substance. The saturated mixture is the state when the solution will reached the point in which the no more solute can be added to the mixture. The saturated defined as the  vapor in the equilibrium with the liquid at or above the normal boiling point

Thus, The saturated liquid-vapor mixture can be defined as the state at which the liquid and the vapor phases coexist in equilibrium.

To learn more about saturated liquid-vapor mixture here

https://brainly.com/question/23339302

#SPJ4

The role of a Si atom be on a Ga site in the GaAs lattice the Si will act as electron donor.

GaAs is a III and V compound. Ga has +3 oxidation state and valence of Ga es 3. / state and As has -5

If Si occupies gallius site

Silicon will donate 3 electron to form with As and still it will have 1 electron

Left in valence band

Then Si will act as electron donor.

Electron donor refers to a species or molecule that donates or transfers electrons to another species or molecule, known as the electron acceptor. This transfer of electrons is essential in various chemical and biological processes, such as cellular respiration, photosynthesis, and cellular metabolism. In cellular respiration, glucose acts as an electron donor, transferring electrons to oxygen molecules, which are electron acceptors. In photosynthesis, chlorophyll acts as an electron donor, donating electrons to carbon dioxide molecules, which are used to produce glucose.

Electron donors can be either inorganic or organic compounds and can also be a source of energy for living organisms. For example, hydrogen sulfide (H2S) acts as an electron donor for chemosynthetic bacteria, producing energy through the transfer of electrons to sulfur oxides.

To learn more about Electron donor visit here:

brainly.com/question/14661213

#SPJ4

The final amount of moles in the cylinder is 10.28 moles

Mole is a unit of measurement used in chemistry to measure the amount of a substance. It is defined as the amount of a substance that contains as many elementary entities (atoms, molecules, ions, electrons, etc.) as there are atoms in 0.012 kg of carbon-12.

The amount of moles in the cylinder is determined by the ideal gas law (PV=nRT),
where P is the pressure,
V is the volume,
n is the number of moles,
R is the ideal gas constant, and
T is the temperature.

When the volume of the cylinder is changed from 8.00 L to 12.7 L, the number of moles in the cylinder will change accordingly:
n1/V1 = n2/V2
Where n1 is the initial number of moles (7.00 moles) and V1 is the initial volume (8.00 L).
Rearranging the equation gives us:
n2 = n1*V2/V1
Therefore, the final amount of moles in the cylinder is:
n2 = 7.00 moles * 12.7 L/ 8.00 L = 10.28 moles

To learn more about mole
https://brainly.com/question/24191825
#SPJ4

The redox reaction will be non-spontaneous when the sum of the voltages of the oxidation and reduction half reactions are negative.

What is a redox reaction?

A redox reaction, also known as oxidation-reduction reaction, is a type of chemical reaction that involves the transfer of electrons between two species in order to produce a net change in oxidation states. This transfer of electrons can be either a gain or loss of electrons, leading to a net change in the oxidation states of the species involved. Redox reactions are essential for many biological processes, such as respiration and photosynthesis.

The sum of the voltages of the oxidation and reduction half reactions being negative indicates that the reduction half reaction has a higher voltage than the oxidation half reaction. This means that the reaction is energetically unfavorable, and therefore non-spontaneous.

Therefore, the sum of the voltages of the oxidation and reduction half reactions are negative

To learn more about redox reaction from the link

https://brainly.com/question/13978139

#SPJ1

The percent yield of the reaction is 70%, since 3.5 g of aluminum oxide is produced when 2.5 g of aluminum reacts with 2.5 g of oxygen gas.

The percent yield of a reaction can be calculated if the amount of product produced and the amount of reactants used are known. First, the theoretical yield of the reaction must be determined. This is calculated by multiplying the amount of reactant used by the mole ratio of the reaction. In the given experiment, 2.5 g of aluminum will react with 2.5 g of oxygen, thus the theoretical yield of aluminum oxide will be 5 g. The actual yield is 3.5 g, so the percent yield of the reaction is determined by dividing the actual yield (3.5 g) by the theoretical yield (5 g) and then multiplying by 100. The result is 70%, meaning 70% of the theoretical yield of the reaction was achieved.

Learn more about aluminum here:

https://brainly.com/question/9496279

#SPJ4

There will be 5.3241 mg of the sample still remaining after 34 years.

A radioactive isotope's half-life is the amount of time it takes for one half of it to decay. The half-life of a particular radioactive isotope is independent of its surroundings or initial concentration.

The half-life is the amount of time required for a quantity (of substance) to reduce to half of its initial value.

Now, the value of N( t ) is given by the formula ,

N( t ) = N₀ ( 1/2 )^ t/ t½

Where,

The value of t½ = 29 years

The initial amount of strontium-90 (N₀) = 12 mg

The number of days (t) = 34 years

The amount of strontium-90 left after 34 years = N( t )

Substituting the values in the equation , we get

N( t ) = 12 mg( 1/2 )^34/29

N( t ) = 12 mg ( 1/2 )¹ ¹⁷²⁴

N( t ) = 12 mg x 0.4436

N( t ) = 5.3241 mg

To learn more about half life click :

brainly.com/question/29301147

#SPJ4

The volume of the hydrogen gas will increase as the temperature decreases to 200 K, so the answer is likely to be greater than 3.0 L.

The volume of the hydrogen gas in the container can be found using the Ideal Gas Law, PV = nRT.

At 300 K, the pressure (P) and number of moles of gas (n) are constant, so the volume (V) and temperature (T) are related by the equation:

V1/T1 = V2/T2

Where V1 is the original volume, T1 is the original temperature, V2 is the new volume, and T2 is the new temperature.

Solving for V2, we get:

V2 = V1 * T2/T1 = 3.0 L * 200 K / 300 K = 2.0 L.

So the volume of the hydrogen gas at 200 K will be 2.0 L.

A 3.0 L container holds a sample of hydrogen gas at 300 K.

The temperature decreases to 200 K and the pressure remains constant.

Learn more about hydrogen here:

https://brainly.com/question/28937951

#SPJ4

The charts show that the greatest water usage would be for agriculture.

Agriculture is the largest user of water because crops and livestock need water to grow and produce food. Irrigation is a common method of supplying water to crops, and large amounts of water are also used in livestock production to provide drinking water and to clean facilities. In addition, water is also used in food processing, transportation, and storage.

Moreover, agriculture is a significant contributor to global water demand, as the population continues to grow and demand for food increases.

Learn more about agriculture:https://brainly.com/question/12568494

#SPJ1

Helium is the sole element that cannot be solidified by adequate cooling at atmospheric pressure. Therefore, 4g is the mass of helium.

Helium (He) is a chemical element and inert gas in Periodic Group 18 (noble gases). Helium, the second lightest chemical (only hydrogen is lighter), is a colorless, odorless, and colorless gas that solidifies at 268.9 °C (452 °F). Helium has lower boiling as well as freezing points than any other known material.

Helium is the sole element that cannot be solidified by adequate cooling at atmospheric pressure; it must be consolidated at a stress of 25 atmospheres at a temperature of one K (272 °C or 458 °F).

mole = given number of atoms/  6.022×10²³

        =  6 X 10²³ /6.022×10²³

           = 1 mole

mass = mole× molar mass

         = 1×4

          = 4g

Therefore, 4g is the mass of helium.

To learn more about helium, here:

https://brainly.com/question/17367278

#SPJ1

Yes, the centrifuge load always contains the an even number of the tubes.

The centrifuge load always contains the an even number of tubes. To prevent the unnecessary wear on the shaft and the bearings, it always load the centrifuge with the an even number of the tubes. If you have the only one sample to the centrifuge, fill the second test tube with the water to the same level as the sample tube have, and the place it in the port of the opposite of the sample tube.

Thus, it is necessary to load always contains the an even number of the tubes.

To learn more about centrifuge here

https://brainly.com/question/17228477

#SPJ4

Snorkeling is a great way to spend your vacation this year! It's a great way to explore the underwater world and see all sorts of amazing sea creatures up close.

Vacation is a period of time away from work and other regular activities, typically used for rest, relaxation, or travel. It is an opportunity to take a break from the everyday hustle and bustle of life and to visit new places and explore different cultures.

Plus, it's a wonderful way to get some exercise while having an adventure. You can find great snorkeling spots all over the world, from tropical beaches to coral reefs and beyond. So, if you're looking for an exciting and unique vacation experience, why not consider snorkeling?

To learn more about vacation
https://brainly.com/question/14524351
#SPJ4

The best measuring cup to take each measurement in one go that is 36 mL of water, 5.75 mL of sucrose solution and 18.5 mL of NaCl solution is the graduated cylinder.

The graduated cylinder chosen same number of decimal places reading capability as the number of decimal places in the volume measured to be measured. For example: for 36ml, we require reading or marking with best reading 1 mL.

For 5.75 mL, we require marking that can tell up to two decimal places so marking should be 0.01 mL or maximum 0.05 mL as 0.01 mL marking is very difficult to read. For 18.5 mL, we require marking should be with reading capability 0.1 mL.

Hence the required measuring cup is graduated cylinder.

To learn more about graduated cylinder, visit :

https://brainly.com/question/21130977

#SPJ4

Answer:

0.11944253330707622

Explanation:

In a reaction between 4. 15 g of iron oxide and excess carbon only 1. 42 g of iron is recovered. The percent yield for this reaction is 49.0%.

Mass of iron oxide = 4.15g

Mass of iron recovered = 1.42g

The molar mass of Fe2o3 = 159.69g/mol

Moles of Fe2o3= [tex]\frac{Mass}{Molar mass} = \frac{4.15g}{159.69g/mol} = 0.026mol[/tex]

0.026mol of Fe2o3 react can produce= 0.026 × 4mol of fe/ 2mol of fe2o3

0.052mole of fe.

The Mass of Fe produced = 0.052×55.859= 2.90g of Fe.

Percent yield= Actual yield ×100/Theoretical yield

                     = [tex]\frac{1.42}{2.90} *100= 48.97%[/tex]= 49%

A chemical response is a system that results in the chemical transformation of one set of chemical materials to another. Classically, chemical reactions embody adjustments that best contain the positions of electrons inside the forming and breaking of chemical bonds between atoms, and not using a exchange to the nuclei (no change to the factors present), and can frequently be described by way of a chemical equation. Nuclear chemistry is a sub-area of chemistry that includes the chemical reactions of risky and radioactive factors in which each digital and nuclear change can arise.

The substance (or substances) to begin with worried in a chemical response are called reactants or reagents. Chemical reactions are commonly characterized by a chemical change, and they yield one or extra products, which usually have residences one of a kind from the reactants.

To learn more about Reaction visit here

brainly.com/question/13440548

#SPJ4

Answer: "Dried mineral water" is a bit of a confusing term, because water is a liquid and cannot really be dried in the traditional sense. However, minerals that are dissolved in water can be left behind when the water evaporates or is removed in some way.

If we assume that you are referring to mineral-rich water that has been evaporated or otherwise had the water removed, then the minerals that were dissolved in the water could form a solid residue or deposit. The exact composition of this residue would depend on the specific minerals present in the water.

For example, if the mineral water contained a high concentration of calcium and magnesium, then the residue could potentially be calcium and magnesium carbonate, which is the same mineral that makes up limestone. If the water contained a high concentration of sodium and chloride, then the residue could be salt.

In general, when water containing minerals evaporates or is removed, the minerals can precipitate out of solution and form a solid deposit. The exact composition of this deposit will depend on the specific minerals present in the water.