How many grams of CO2 are produced by the combustion of 424 g of a mixture that is 37.6% CH4 and 62.4% C3H8 by mass

The two compounds, cis-1-bromo-2-ethylcyclohexane and trans-1-bromo-2-ethylcyclohexane, have different stereochemical arrangements. The cis isomer has the two ethyl groups on the same side of the ring, while the trans isomer has the ethyl groups on opposite sides of the ring. This difference in stereochemistry affects how the molecules undergo an E2 reaction.

During an E2 reaction, a strong base removes a proton from the beta carbon of the brominated cyclohexane, forming a carbanion intermediate. The base then eliminates the bromine atom, resulting in the formation of a double bond between the beta and alpha carbons.

In the case of cis-1-bromo-2-ethylcyclohexane, the elimination of the bromine atom results in a bulky group (the ethyl group) being positioned in close proximity to the newly formed double bond. This steric hindrance destabilizes the transition state and results in a slower reaction rate. As a result, the major product is formed via a less favorable anti-periplanar conformation, which is less energetically favorable.

On the other hand, in trans-1-bromo-2-ethylcyclohexane, the elimination of the bromine atom results in the formation of a more favorable anti-periplanar conformation. This conformation has less steric hindrance and is therefore more energetically favorable, resulting in a faster reaction rate. As a result, the major product is formed via the more favorable anti-periplanar conformation, which is energetically favorable.

In summary, the difference in stereochemistry between the two isomers affects the reaction rate and the stability of the transition state, resulting in the formation of different major products during an E2 reaction.

To know more cis-1-bromo-2-ethylcyclohexane click this link-

brainly.com/question/2396621

#SPJ11

The molar heat of neutralization for HClO3 is 140.1 kJ/mol.

The molar heat of neutralization (in kJ/mole) for HClO3 can be calculated using the following formula:
Molar heat of neutralization = Heat released (J) / Number of moles of HClO3 neutralized

First, we need to calculate the number of moles of HClO3 neutralized. We can do this by using the molecular weight of HClO3, which is 84.46 g/mol:

Number of moles of HClO3 = Mass of HClO3 / Molecular weight of HClO3
Number of moles of HClO3 = 1.2717 g / 84.46 g/mol
Number of moles of HClO3 = 0.01506 mol

Now we can use the formula to calculate the molar heat of neutralization:

Molar heat of neutralization = 2,107 J / 0.01506 mol
Molar heat of neutralization = 140,000 J/mol

To convert this to kJ/mol, we divide by 1,000:

Molar heat of neutralization = 140 kJ/mol

Therefore, the molar heat of neutralization (in kJ/mole) for HClO3 is 140 kJ/mol.

To know more about molar heat, visit:

https://brainly.com/question/29401184

#SPJ11

150.83s is required for 2.00 M PH3 to decrease to a concentration of 0.350 M.

Using Rate Law:

[tex]Rate = \frac{d[PH_{3}] }{[PH_{3} ]}[/tex]

∫[tex]\frac{[PH_{3}] }{[PH_{3}]0} \frac{d[PH_{3}] }{[PH_{3}] } = k[/tex][tex]\int\limits^0_t {t}[/tex]

By solving,

[tex]ln[PH_{3} ] = ln[PH_{3}]_{0} - kt[/tex]

ln(2.50) = ln(1) - -k(120)

-1.38 = 0 - (-120k)

k = 0.01155[tex]s^{-1}[/tex]

Now, using the first order concentration time equation,

[tex]ln[PH_{3}] = ln[PH_{3}]_{0} - kt[/tex]

ln (0.350) = ln (2) - (-0.01155 t)

-1.049 = 0.693 - (-0.01155 t)

1.74 = 0.01155t

t = 150.83s

A rate law demonstrates the relationship between reaction rate and reactant concentration. The link between the reaction rate and the concentrations of each reactant is expressed by a rate law. The proportionality constant (k) connecting the rate of the reaction to reactant concentrations determines the specific rate constant (SRC).

Rate laws give a mathematical explanation of how variations in a substance's concentration can alter the rate of a chemical reaction. Since reaction stoichiometry cannot predict rate laws, they must be determined experimentally.

Learn more about rate law;

https://brainly.com/question/30379408

#SPJ4

Carbon-14 having a half-life of 5,730 years. A fossil is found that has 22% of the carbon-14 found in the living sample. Then, the  fossil is approximately 17,150 years old.

We can use the formula for radioactive decay to solve this problem;

N = N0 × [tex](1/2)^{(t/T)}[/tex]

where N is final amount of carbon-14, N0 is initial amount of carbon-14 (in a living sample), t istime that has passed since the death of the organism, and T is the half-life of carbon-14.

Let's assume that the initial amount of carbon-14 in the fossil was the same as in a living sample, and let N be 22% of N0. We can solve for t:

N = N0 ×  [tex](1/2)^{(t/T)}[/tex]

0.22 N0 = N0 × [tex](1/2)^{(t/5730)}[/tex]

[tex](1/2)^{(t/5730)}[/tex] = 0.22

Taking the natural logarithm of both sides:

ln[[tex](1/2)^{(t/5730)}[/tex]] = ln 0.22

(t/5730) × ln(1/2) = ln 0.22

t/5730 = -0.693

t = -0.693 × 5730 / ln 0.22

t ≈ 17,150 years

Therefore, the fossil is approximately 17,150 years old.

To know more about radioactive decay here

https://brainly.com/question/1770619

#SPJ1

The vapor pressure of a solution made from 1.00 mole of ethylene glycol and 9.00 moles of water, which form nearly ideal solutions, is 22.5 mm Hg at the same temperature where pure water has a vapor pressure of 25.0 mm Hg.

It is lower than that of pure water due to the presence of the nonvolatile ethylene glycol. The vapor pressure of the solution can be calculated using Raoult's law:

P = Xsolvent * Psolvent

where P is the vapor pressure of the solution, Xsolvent is the mole fraction of the solvent (water), and Psolvent is the vapor pressure of pure water at the same temperature.

The mole fraction of water in the solution is 9.00/(1.00 + 9.00) = 0.900, and the vapor pressure of pure water is given as 25.0 mm Hg.

Therefore, the vapor pressure of the solution is:

P = 0.900 * 25.0 mm Hg = 22.5 mm Hg.

To know more about the vapor pressure refer here :

https://brainly.com/question/11864750#

#SPJ11

The pH of the 0.12 M solution of the acid at 40°C is 7.7.

The pH of a 0.12 M solution of an acid can be calculated using the following steps:

Calculate the dissociation constant (Ka) of the acid using the pKb of its conjugate base:

pKb + pKa = 14

pKa = 14 - pKb

pKa = 14 - 6.3

pKa = 7.7

Ka = [tex]10^{-pKa[/tex]

Ka = [tex]1.995 * 10^{-8[/tex]

Calculate the concentration of [tex]H^+[/tex] ions in the solution using the dissociation constant of the acid and its concentration:

[tex]Ka = [H^+][A^-]/[HA]\\[H^+] = (Ka * [HA])/[A^-]\\[H^+] = (1.995 * 10^{-8} * 0.12)/0.12\\[H^+] = 1.995 * 10^{-8} M[/tex]

Calculate the pH of the solution using the concentration of [tex]H^+[/tex] ions:

[tex]pH = -log[H^+]\\pH = -log(1.995 * 10^{-8})\\pH = 7.7[/tex]

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

The redox reaction that you would expect to occur spontaneously in the reverse direction is number 4: Ca2+(aq) + Zn(s) -------> Ca(s) + Zn2+(aq). This is because the standard reduction potential for the reduction of Zn2+ to Zn is lower than that of Ca2+ to Ca.

Therefore, in the forward direction, Zn is oxidized and Ca is reduced. However, in the reverse direction, Ca would be oxidized and Zn would be reduced, which would require an external energy source and therefore would not occur spontaneously.
Based on the information provided and considering the standard reduction potentials of the elements involved, the redox reaction that you can expect to occur spontaneously in the reverse direction is:

3) 2Al(s) + 3Pb2+(aq)-----> 2Al3+(aq) + 3Pb(s)

This is because when comparing the reduction potentials, aluminum has a higher tendency to get oxidized (lose electrons) compared to lead, making it more favorable for the reaction to occur in the reverse direction.

For more information on redox reaction visit:

brainly.com/question/13293425

#SPJ11

the empirical formula of the compound is N1O2 and the molecular formula is N2O4.

To find the empirical formula of the compound, we need to determine the relative number of atoms of each element in the compound.

Let's assume we have 100 grams of the compound, which means that there are 30.5 grams of nitrogen in the compound.

Using the periodic table, we can find that the atomic masses of nitrogen and oxygen are approximately 14 g/mol and 16 g/mol, respectively.

The number of moles of nitrogen in the compound is:

30.5 g / 14 g/mol = 2.18 mol

The number of moles of oxygen in the compound is:

100 g - 30.5 g = 69.5 g

69.5 g / 16 g/mol = 4.34 mol

To get the relative number of atoms of each element in the compound, we can divide each number of moles by the smallest number of moles:

2.18 mol / 2.18 mol = 1 N

4.34 mol / 2.18 mol = 2 O

Therefore, the empirical formula of the compound is N1O2.

To find the molecular formula, we need to determine the actual number of atoms of each element in one molecule of the compound.

The molar mass of the compound is given as 92 g/mol, which is twice the empirical formula mass of N1O2 (which is 14 + 2(16) = 46 g/mol).

To get from the empirical formula to the molecular formula, we need to multiply the subscripts by a whole number that will give us a total molecular mass of 92 g/mol.

The molecular formula of the compound can be found by dividing the molar mass of the compound by the empirical formula mass:

92 g/mol / 46 g/mol = 2

This means that the molecular formula is twice the empirical formula: N2O4.

What is periodic table?

The periodic table is a tabular arrangement of the chemical elements, organized on the basis of their atomic number, electron configurations, and chemical properties.

To know more about periodic table visit:

brainly.com/question/11155928

#SPJ11

It is harder to calculate the pH of a solution formed with a weak base than for a strong base because weak bases only partially ionize in water, which means that the concentration of hydroxide ions (OH-) is much lower than for a strong base.

When a strong base is dissolved in water, it fully ionizes to release hydroxide ions (OH-) into the solution, which results in a high concentration of hydroxide ions and a high pH. The pH can be easily calculated using the formula:

pH = -log[OH-]

However, when a weak base is dissolved in water, it only partially ionizes to release hydroxide ions (OH-) into the solution, which results in a low concentration of hydroxide ions and a pH that depends on the extent of ionization. The equilibrium constant (Kb) for the reaction of the weak base with water can be used to calculate the concentration of hydroxide ions and the pH of the solution, but this requires more complex calculations.

Moreover, weak bases also undergo acid-base equilibria in water, and the extent of ionization can be affected by other factors such as the concentration of the weak base, the concentration of its conjugate acid, and the presence of other ions in solution. These factors make it more challenging to predict the pH of a solution formed with a weak base, as compared to a strong base.

To know more about pH refer here :

https://brainly.com/question/15289741#

#SPJ11

When the estrogen to progesterone ratio is high, cilia of the isthmus beat towards the uterus. This is because estrogen is known to stimulate the cilia to beat in a coordinated and rhythmic fashion, creating a flow that moves the egg towards the uterus. On the other hand, progesterone is known to inhibit the ciliary beating and relax the muscle contractions of the fallopian tubes, creating an environment that is conducive for implantation of a fertilized egg.

The movement of the cilia towards the uterus is essential for successful fertilization and implantation. If the cilia are not beating in the right direction, the egg may not reach the uterus in time, or it may not be properly fertilized. This can lead to fertility issues and difficulties with conception.

Overall, the balance between estrogen and progesterone plays a critical role in regulating the movement of the cilia in the isthmus, ensuring successful fertilization and implantation of a fertilized egg. Therefore, it is important to maintain a healthy hormonal balance to support reproductive health.

TO KNOW MORE ABOUT  estrogen to progesterone ratio CLICK THIS LINK -

brainly.com/question/13257526

#SPJ11

The mass of the original sample was 24 grams of a carbon-14 has a half life of 5730 years. after 17,190 years, only 3g remains.

Carbon-14 has a half-life of 5730 years, meaning that after that amount of time has passed, half of the original amount of carbon-14 in a sample will have decayed. After another 5730 years, half of the remaining carbon-14 will have decayed, leaving only 25% of the original amount.
So, after 17,190 years (3 half-lives), only 3g of carbon-14 remains. To find the original mass, we can work backwards using exponential decay.
Starting with 3g, we know that this is 25% of the original amount (since 17,190 years represents 3 half-lives). So, we can set up the equation:
3g = 0.25x
Where x is the original mass of the sample.
Solving for x, we get:
x = 3g / 0.25 = 12g
But wait - this is only the mass of the carbon-14 in the sample. To find the total mass of the sample, we need to consider that carbon-14 makes up only a small fraction of the overall mass of an object. Specifically, carbon-14 makes up about 1 part per trillion of the Earth's carbon.
So, we can set up another equation:
x / (1 trillion) = m
Where m is the total mass of the sample. Solving for m, we get:
m = x * (1 trillion) = 12g * (1 trillion) = 12,000,000,000g
Or 12 billion grams.
So, the conclusion is that the original mass of the sample was approximately 12 billion grams, or 12 million kilograms.

For more information on carbon decay kindly visit to

https://brainly.com/question/23484270

#SPJ11

The correct set of quantum numbers that does not contain an error is . n = 4, l = 0, ml = -1

Explanation - n: the principal quantum number, represents the energy level of the electron - l: the azimuthal quantum number, determines the shape of the orbital and ranges from 0 to n-1 - ml: the magnetic quantum number, specifies the orientation of the orbital in space and ranges from -l to l. For set C, n = 4 indicates that the electron is in the fourth energy level, l = 0 indicates that the orbital is an s orbital (s orbitals have l = 0), and ml = -1 indicates that the orbital is oriented in space along the x-axis. This set of quantum numbers correctly specifies an s orbital in the fourth energy level oriented along the x-axis. Sets A, B, D, and E contain errors: - A: l = 1 for n = 3 is incorrect because l should be less than n-1, so l can only be 0 or 1 in this case - B: l = 3 for n = 5 is incorrect because l should be less than n-1, so l can only be 0, 1, 2, 3, or 4 in this case. - D: l = 4 for n = 4 is incorrect because l should be less than n-1, so l can only be 0, 1, 2, or 3 in this case. - E: ml = +3 for l = 2 is incorrect because ml should be between -l and +l, so the correct values for ml in this case are -2, -1, 0, 1, or 2.

To know more about azimuthal quantum number click here:

brainly.com/question/30024510

#SPJ11

The acid present in all carbonated beverages that hastens the hydrolysis of aspartame is carbonic acid.

Carbonic acid is formed when carbon dioxide dissolves in water, which occurs during the carbonation process of many beverages. Aspartame is a low-calorie sweetener commonly used in carbonated beverages, but it is not stable in acidic environments. Carbonic acid, being a weak acid, can catalyze the hydrolysis of aspartame into its constituent amino acids and other byproducts. This process can result in a loss of sweetness and flavor in the beverage over time. To prevent this, manufacturers often add stabilizers or adjust the pH levels of the beverage to maintain the desired taste and sweetness.

To learn more about hydrolysis visit;

https://brainly.com/question/29439050

#SPJ11

At pH 4.5, the ionic form that predominates is dihydrogen phosphate (H₂PO₄⁻), as the pH is between the first and second pKa values of phosphoric acid. phosphoric acid is tribasic, with pka's of 2.14, 6.86, and 12.4. t

Phosphoric acid (H₃PO₄) is a tribasic acid, meaning it can donate three protons (H+) in a stepwise manner, resulting in three different pKa values: 2.14, 6.86, and 12.4. At a pH of 4.5, we need to determine which ionic form of phosphoric acid predominates.

The pKa values help us identify the pH at which each proton is removed. At pH 4.5, it falls between the first (2.14) and second (6.86) pKa values.

This indicates that the majority of the phosphoric acid has lost one proton, forming the dihydrogen phosphate ion (H₂PO₄⁻).

Learn more about pH at

https://brainly.com/question/29807943

#SPJ11

The correct answer is a. Ball bearings.

Ball bearings are designed with an inner and outer ring that encloses the balls by use of a separator. The balls are typically made of steel or ceramic and are used to reduce friction between the two rings by rolling between them.

Ball bearings are commonly used in many applications, including automotive, industrial, and aerospace applications, due to their high load-carrying capacity, low friction, and long service life.

Wick bearings, cone bearings, and sleeve bearings are other types of bearings, but they do not use the same design with an inner and outer ring enclosing the balls.

To know more about ball bearings refer here:

https://brainly.com/question/30494885#

#SPJ11

The synthesis of 1-chloro-1-methyl-cyclohexane involves a reaction known as alkene halogenation.

This is an electrophilic addition reaction where the double bond in the alkene is broken and two new covalent bonds are formed with the halogen molecule. In this case, the halogen used is chlorine. During the reaction, the alkene acts as the nucleophile and attacks the electrophilic chlorine molecule, forming a cyclic intermediate. This intermediate then breaks down, forming a carbocation intermediate. The most stable and substituted carbocation intermediate is then formed, followed by the addition of the chloride ion to the carbocation to form the final product.

To learn more about carbocation click here https://brainly.com/question/13164680

#SPJ11

The Bronsted-Lowry definition of acids and bases is more encompassing than the Arrhenius definition because it allows for a wider range of substances to be classified as acids or bases. The Arrhenius definition only considers substances that produce hydrogen ions (H+) or hydroxide ions (OH-) in aqueous solutions as acids or bases.

However, the Bronsted-Lowry definition considers any substance that can donate a proton (H+) as an acid and any substance that can accept a proton as a base. This means that not only aqueous solutions but also non-aqueous solutions and gas-phase reactions can be classified as acidic or basic using the Bronsted-Lowry definition.

Additionally, the Bronsted-Lowry definition allows for the concept of conjugate acid-base pairs, which helps explain the relationship between acidic and basic substances in chemical reactions.


The Arrhenius definition states that acids are substances that produce hydrogen ions (H+) when dissolved in water, while bases are substances that produce hydroxide ions (OH-) when dissolved in water. This definition is limited to aqueous solutions and only considers the presence of H+ and OH- ions.


In summary, the Bronsted-Lowry definition is more encompassing than the Arrhenius definition because of it:
1. Includes non-aqueous reactions.
2. Considers proton transfer reactions, not just H+ and OH- ion formation.
3. Applies to a wider range of chemical species and reactions.

to know more about Arrhenius here:

brainly.com/question/9936252

#SPJ11

The electron transport chain (ETC) is a series of complexes that carry out the final stages of cellular respiration.

Complexes I, III, and IV are integral components of the ETC, and they are responsible for the transfer of electrons from NADH and FADH2 to oxygen, generating a proton gradient across the inner mitochondrial membrane that is used to generate ATP by ATP synthase.

When Complexes I, III, and IV are associated with one another in the form of a respirasome, several advantages arise:

1. Increased efficiency: The formation of the respirasome allows for more efficient electron transfer between the complexes, as it reduces the diffusion distance and minimizes electron loss.

2. Protection against oxidative damage: The close association of Complexes I, III, and IV prevents the formation of reactive oxygen species (ROS), which can damage the ETC and impair mitochondrial function.

3. Coordination of activity: The respirasome allows for coordination of the activities of the complexes, ensuring that electron transfer is tightly regulated and ATP synthesis is optimized.

4. Facilitation of substrate channeling: The close proximity of the complexes facilitates the channeling of substrates and products between the complexes, allowing for more efficient electron transfer and ATP synthesis.

In summary, the association of Complexes I, III, and IV in the form of a respirasome enhances the efficiency, coordination, and protection of the ETC, resulting in optimized energy production by the cell.

to know more about electron transport chain refer here:

https://brainly.com/question/13975046#

#SPJ11

Answer:

There are several factors that can cause an organism's cellular respiration to slow down. One of the most common factors is a decrease in the availability of oxygen, which is necessary for the oxidative processes that generate ATP in the mitochondria. When there is less oxygen available, the oxidative processes slow down, and the rate of cellular respiration decreases.

Other factors that can slow down cellular respiration include a decrease in the availability of nutrients or a buildup of waste products that inhibit metabolic processes. Certain environmental conditions, such as extreme temperatures or pH levels outside of the optimal range for metabolic enzymes, can also slow down cellular respiration.

It's worth noting, however, that not all organisms rely on cellular respiration as their primary mode of energy production. Some organisms, such as anaerobic bacteria, can generate energy through other metabolic pathways that do not require oxygen.

The pressure of the mixture is 13.5 atm. It is important to note that Dalton's law is only applicable to non-reacting gases.

To determine the pressure of a mixture of gases, we need to use Dalton's law of partial pressures, which states that the total pressure of a mixture of non-reacting gases is equal to the sum of the partial pressures of each individual gas.

According to this law, the pressure of the mixture containing xenon gas at a pressure of 5.30 atm and helium gas at a pressure of 8.20 atm can be calculated by adding the partial pressures of xenon and helium:

Total pressure = partial pressure of xenon + partial pressure of helium

Total pressure = 5.30 atm + 8.20 atm

Total pressure = 13.5 atm

If the gases are chemically reacting with each other, the ideal gas law or other laws of thermodynamics should be used to calculate the properties of the mixture. Additionally, it is assumed that the gases are at the same temperature and volume. If the temperature or volume of the gases differs, appropriate corrections must be made to the calculations.

To learn more about Dalton's law

https://brainly.com/question/30459983

#SPJ4

PbF2, BaF2 and CaF2

due to the fact that lead has a higher value of solubility product,

lead fluoride will precipitate first

Answer:

The principle that allows the enthalpy of a reaction to be determined indirectly from several steps is called Hess's Law.

Explanation:

Hess's Law states that the enthalpy change of a chemical reaction is independent of the pathway between the initial and final states, as long as the initial and final conditions are the same.

This means that the overall enthalpy change for a reaction can be calculated by adding or subtracting the enthalpy changes for a series of simpler reactions that add up to the overall reaction.

TO KNOW MORE ON Hess's Law ,

https://brainly.com/question/14561923#

#spj11

a. It will take approximately 58.8 hours for the pile to reach the top of the silo.

b. The floor area of the pile is growing at a rate of approximately 1,026.1 ft^2/h when the pile is 60 ft high.

c. It will be equal to the difference between the rate at which ore is being delivered by the conveyor

(a) To determine how long it will take for the pile to reach the top of the silo, we need to find the rate at which the volume of the pile is increasing. The volume of a cone is given by the formula V = (1/3)πr^2h, where r is the radius of the cone and h is its height.

At time t, the height of the pile is h = 60 ft, and the radius of the cone is r = 1.5h = 90 ft. The volume of the pile is therefore:

V = (1/3)π(90 ft)^2(60 ft) = 1,027,592.38 ft^3

The rate at which the volume of the pile is increasing is equal to the rate at which the conveyor is delivering ore to the top of the silo. We are given that the conveyor carries ore at a rate of 60,000 ft^3/h. Therefore, the time it will take for the pile to reach the top of the silo is:

t = (volume of silo - volume of pile)/conveyor rate

t = ((π(200 ft)^2(100 ft))/3 - 1,027,592.38 ft^3)/60,000 ft^3/h

t = 58.8 hours

(b) To find how fast the floor area of the pile is growing when the pile is 60 ft high, we need to find the rate at which the radius of the cone is increasing. The radius of the cone is related to its height by the equation r = 1.5h.

At a height of h = 60 ft, the radius of the cone is r = 1.5(60 ft) = 90 ft. The area of the base of the pile is:

A = πr^2 = π(90 ft)^2 ≈ 25,465 ft^2

To find how fast the area of the base is changing, we can differentiate the formula for the area with respect to time:

dA/dt = 2πr(dr/dt)

To find dr/dt, we can use the relationship between r and h:

r = 1.5h

dr/dt = 1.5(dh/dt)

We are given that the height of the pile is 60 ft, and we know that the rate at which ore is being delivered to the silo is 60,000 ft^3/h. The volume of a cone is given by the formula V = (1/3)πr^2h, so the rate at which the height of the pile is increasing is:

dh/dt = (3V)/(πr^2)(d(r/3)/dt)

dh/dt = (3(60,000 ft^3/h))/(π(90 ft)^2)(d(30 ft)/dt)

dh/dt ≈ 3.81 ft/h

Substituting into the formula for dA/dt, we get:

dA/dt = 2π(90 ft)(1.5(3.81 ft/h))

dA/dt ≈ 1,026.1 ft^2/h

(c) When the loader starts removing ore from the pile, the rate at which the volume of the pile is decreasing will be equal to the difference between the rate at which ore is being delivered by the conveyor

For more question on pile click on

https://brainly.com/question/30519575

#SPJ11

Complete Question

A planning engineer for a new alum plant must present some estimates to his company regarding the capacity of a silo designed to contain bauxite ore until it is processed into alum. The ore resembles pink talcum powder and is poured from a conveyor at the top of the silo. The silo is a cylinder 100ft high with a radius of 200ft. The conveyor carries ore at a rate of 60,000? ft^3/h and the ore maintains a conical shape whose radius is 1.5 times its height.

(a) If, at a certain time t, the pile is 60ft high, how long will it take for the pile to reach the top of the silo?

(b) Management wants to know how much room will be left in the floor area of the silo when the pile is 60 ft high. How fast is the floor area of the pile growing at that height?

(c) Suppose a loader starts removing the ore at the rate of 20,000? ft^3/h when the height of the pile reaches 90 ft. Suppose, also, that the pile continues to maintain its shape. How long will it take for the pile to reach the top of the silo under these conditions?

The major product of the given reaction is 2-bromopropanoic acid, which can be represented by the structural formula BrCH2CH2COOH.

The given reaction is the addition of bromine (Br2) to formic acid (HCOOH) in the presence of sulfuric acid (H2SO4). This is an electrophilic addition reaction where the bromine molecule acts as the electrophile and adds to the carbonyl group of formic acid.The major product of this reaction is 2-bromopropanoic acid (BrCH2CH2COOH), which is formed by the addition of bromine to the carbon adjacent to the carbonyl group. The stereochemistry of the product would depend on the starting stereochemistry of the reactants, which is not specified in the question.It is important to note that the reaction conditions and the starting material can also lead to the formation of other by-products such as dibromomethane (CH2Br2) and bromoform (CHBr3). These by-products can also have different stereochemistries depending on the starting material.Overall, the major product of the given reaction is 2-bromopropanoic acid, which can be represented by the structural formula BrCH2CH2COOH.

learn more about reaction here

https://brainly.com/question/29997907

#SPJ11

23.1 g of PbI₂ will form as a precipitate.

The balanced chemical equation for the reaction between lead(II) nitrate, Pb(ClO₃)₂, and sodium iodide, NaI, is:

Pb(ClO₃)₂ + 2NaI → PbI₂ + 2NaClO₃

From this equation, we can see that one mole of Pb(ClO₃)₂ reacts with two moles of NaI to produce one mole of PbI₂. We can use the given volume and concentration of NaI to calculate the number of moles of NaI used in the reaction:

0.500 L x 0.200 mol/L = 0.100 mol NaI

Since two moles of NaI are needed to react with one mole of  Pb(ClO₃)₂ we can calculate the number of moles of Pb(ClO₃)₂ used in the reaction:

0.100 mol NaI x (1 mol Pb(ClO₃)₂ / 2 mol NaI) = 0.050 mol Pb(ClO₃)₂

To determine the mass of PbI₂ that will form, we need to calculate the limiting reactant, which is the reactant that will be completely consumed in the reaction. We compare the number of moles of Pb(ClO₃)₂used in the reaction (0.050 mol) to the number of moles of Pb(ClO₃)₂ initially present in the solution. Since the volume and concentration of the  Pb(ClO₃)₂ solution are given, we can calculate the number of moles of Pb(ClO₃)₂ present using:

1.50 L x (1.0 mol / 331.21 g) x (1 mol Pb(ClO₃)₂ / 1 mol) = 0.00453 mol Pb(ClO₃)₂

Since the number of moles of Pb(ClO₃)₂ used in the reaction is less than the number of moles of Pb(ClO₃)₂ initially present, Pb(ClO₃)₂ is not the limiting reactant. Therefore, NaI is the limiting reactant.

The number of moles of PbI₂ produced can be calculated using the stoichiometry of the balanced chemical equation:

0.050 mol Pb(ClO₃)₂ x (1 mol PbI₂ / 1 mol Pb(ClO₃)₂ = 0.050 mol PbI₂

Finally, we can calculate the mass of PbI₂ using its molar mass:

0.050 mol PbI₂ x (461.01 g/mol) = 23.1 g PbI₂

Therefore, 23.1 g of PbI₂ will form as a precipitate.

Learn more about balanced chemical equation

https://brainly.com/question/28294176

#SPJ4

Helium atoms attract one another weakly through London dispersion forces. The correct option is C.

The reason that helium atoms do not combine to form He2 molecules is due to the fact that helium is a noble gas, which means that its outermost electron shell is already full and it has no tendency to gain or lose electrons to form chemical bonds.

However, despite not forming a stable molecule, helium atoms do experience weak attractive forces between them, which are known as London dispersion forces.

These forces arise due to the temporary asymmetry in electron distribution in an atom or molecule, which leads to the formation of temporary dipoles. These temporary dipoles can induce similar dipoles in neighboring atoms or molecules, leading to attractive forces between them.

For more question on London dispersion forces click on

https://brainly.com/question/1454795

#SPJ11

The specific heat of iron is approximately 0.449 J/(g°C).

This problem can be solved using the principle of conservation of energy, which states that the total energy of a system remains constant unless acted upon by an external force. In this case, the energy gained by the cold water is equal to the energy lost by the hot iron.

To solve for the specific heat of the iron, we need to use the formula:

Q = mcΔT

where Q is the amount of heat transferred, m is the mass of the object, c is the specific heat, and ΔT is the change in temperature.

In this problem, the hot iron loses heat as it cools down, and the cold water gains heat as it warms up. We can calculate the amount of heat lost by the iron and the amount of heat gained by the water using the formula above, and then equate them.

First, we need to calculate the heat lost by the iron:

Q_iron = mcΔT

where m = 10 g (mass of the iron), c is the specific heat of iron (which we want to solve for), ΔT = 100 - 21.8 = 78.2°C (the change in temperature of the iron).

Next, we need to calculate the heat gained by the water:

Q_water = mcΔT

where m = 50 g (mass of the water), c = 4.18 J/(g°C) (specific heat of water), ΔT = 21.8 - 20 = 1.8°C (the change in temperature of the water).

Since the total amount of heat lost by the iron is equal to the total amount of heat gained by the water, we can equate the two expressions:

Q_iron = Q_water

mcΔT_iron = mcΔT_water

10c(78.2) = 50(4.18)(1.8)

Solving for c, we get:

c = [tex]$\frac{50(4.18)(1.8)}{10(78.2)}$[/tex]

c = 0.449 J/(g°C)

To learn more about specific heat

https://brainly.com/question/11297584

#SPJ4

The concentrations of calcium ions and oxalate ions in the solution are both 4.8 x 10⁻⁵ M when calcium oxalate is dissolved in 0.0100 M Ca(NO₃)₂(aq).

When calcium oxalate is dissolved in a solution of calcium nitrate, it dissociates according to the following equation:

CaC₂O₄(s) ⇌ Ca₂+(aq) + C₂O₄ 2-(aq)

The solubility product constant (Ksp) expression for calcium oxalate is:

Ksp = [Ca2+][C₂O₄ 2-]

To calculate the concentrations of calcium ions and oxalate ions, we need to use the initial concentration of Ca(NO₃)₂(aq) and the Ksp value of calcium oxalate.

Initial concentration of Ca(NO₃)₂(aq) = 0.0100 M

Ksp of calcium oxalate = 2.3 x 10⁻⁹

Let the concentration of Ca2+ and C₂O₄ 2- ions be x M.

At equilibrium, the concentration of Ca2+ ions is equal to the concentration of C₂O₄ 2- ions, so we can write:

[Ca2+] = [C2O4 2-] = x

Substituting this into the Ksp expression gives:

Ksp = x²

Solving for x, we get:

x = √(Ksp) = √(2.3 x 10⁻⁹) = 4.8 x 10⁻⁵ M

Therefore, the concentrations of calcium ions and oxalate ions in the solution are both 4.8 x 10⁻⁵ M when calcium oxalate is dissolved in 0.0100 M Ca(NO₃)₂(aq).

Learn more about concentrations

https://brainly.com/question/10725862

#SPJ4

It takes more electrical current to electroplate gold with an AuCl₃ solution than to electroplate silver with an AgNO₃ solution, due to gold ions being less reactive and having a higher reduction potential.

Electroplating involves the deposition of a metal onto a conductive surface by passing an electrical current through an electrolyte solution containing ions of the metal to be plated. The amount of current required to electroplate a given amount of metal depends on several factors, including the concentration of metal ions in the electrolyte solution, the surface area of the object being plated, and the type of metal being plated.

In general, it takes more electrical current to electroplate gold than silver because gold ions are less reactive than silver ions and have a higher reduction potential, which means that they require more energy to be reduced and deposited onto a surface. Additionally, gold ions tend to be less stable in solution than silver ions, which means that a higher concentration of gold ions may be required to achieve a desired level of plating.

Therefore, it would likely require more electrical current to electroplate gold with an AuCl₃ solution than to electroplate silver with an AgNO₃ solution.

To learn about electrical current

https://brainly.com/question/2264542

#SPJ4