Carbon tetrachloride, CCl4, has one carbon atom per molecule. The molar mass of carbon tetrachloride can be calculated by adding the atomic masses of the constituent atoms:
1 × 12.01 g/mol (carbon) + 4 × 35.45 g/mol (chlorine) = 154.01 g/mol
To determine the number of moles of carbon in 393.0 g of carbon tetrachloride, we need to divide the mass by the molar mass:
393.0 g / 154.01 g/mol = 2.549 moles
Since there is one carbon atom in each molecule of carbon tetrachloride, there are 2.549 moles of carbon in 393.0 g of carbon tetrachloride.
To convert from moles to grams, we can use the molar mass of carbon:
2.549 moles × 12.01 g/mol = 30.57 g
Therefore, there are approximately 30.57 grams of carbon in 393.0 g of carbon tetrachloride.
How many ATOMS of boron are present in 5.44 grams of boron tribromide, BBr3?
Answer:
Explanation:
To calculate the number of atoms of boron present in 5.44 grams of boron tribromide (BBr3), we need to use Avogadro's number and the molar mass of BBr3.
The molar mass of BBr3 can be calculated by adding the atomic masses of boron and three bromine atoms:
BBr3 molar mass = 1 x atomic mass of B + 3 x atomic mass of Br
BBr3 molar mass = 1 x 10.81 g/mol + 3 x 79.90 g/mol
BBr3 molar mass = 295.41 g/mol
Next, we can calculate the number of moles of BBr3 in 5.44 grams:
moles of BBr3 = mass of BBr3 / molar mass of BBr3
moles of BBr3 = 5.44 g / 295.41 g/mol
moles of BBr3 = 0.0184 mol
Since there is one boron atom in each molecule of BBr3, the number of atoms of boron is the same as the number of molecules of BBr3. We can calculate the number of molecules of BBr3 using Avogadro's number:
number of molecules of BBr3 = moles of BBr3 x Avogadro's number
number of molecules of BBr3 = 0.0184 mol x 6.022 x 10^23/mol
number of molecules of BBr3 = 1.11 x 10^22
Therefore, there are 1.11 x 10^22 atoms of boron in 5.44 grams of BBr3.
helppppppppppppppppppppppppppppppppppppppppppppppp
Answer: B
Explanation:
2 Bd + Ch --> Bd₂Ch
The 2 on the left side of the equation represents 2 separate pieces of bread (answer B).
They are trying to use this illustration to help with understanding stoichiometry in chemistry.
Red sphere represent oxygen atoms and yellow spheres represent sulfur atom and all the molecules are gases
Write a chemical equation.
The reaction equation is; S + O2 --->SO2
What is a chemical reaction?We know that when we have a chemical reaction, we have the combination of the reactants so as to have the products of the reaction. In this case we have that the reactants that were combined as oxygen and sulfur.
We must note that in the chemical reaction that the number of the oxygen and the sulfur atoms on the right hand side of the reaction equation must be the same as the number of the oxygen and the sulfur atoms on the left hand side of the reaction equation.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
How many grams do 2.354E+25 molecules of chromium 2 permanganate weigh?
Chromium 2 permanganate weighs 1117.12 grams or 2.354E+25 molecules.
Why does the body need chromium?Increasing glucose tolerance and enhancing protein, glycogen, and lipid metabolism are two benefits of the crucial trace mineral chromium. People only require very little amounts of this metal coating.
Molar mass of chromium(II) permanganate = (1 x atomic mass of Cr) + (2 x atomic mass of Mn) + (8 x atomic mass of O)
Let's assume the atomic mass of Cr is 52, atomic mass of Mn is 54, and atomic mass of O is 16.
Molar mass of chromium(II) permanganate = (1 x 52) + (2 x 54) + (8 x 16) = 52 + 108 + 128 = 288 g/mol
Moles of chromium(II) permanganate = 2.354 x 10^25 molecules / 6.022 x 10^23 molecules/mol = 3.9 x 10^2 mol
Weight in grams = moles of chromium(II) permanganate x molar mass = 3.9 x 10^2 mol x 288 g/mol = 1117.12 g
So, 2.354 x 10^25 molecules of chromium(II) permanganate weigh approximately 1117.12 grams.
To know more about chromium visit:
https://brainly.com/question/681602
#SPJ1
A car traveling along the highway brakes to stop over a certain distance. More braking force is required if the car hasA. less stopping distanceB. more massC. more momentumD. all of the above
Braking power is required to stop at a certain distance which is greater if the car has D. all of the above
What are car brakes?Car brakes are components of the vehicle engine that play a role in regulating the speed of the vehicle. Brakes are often considered part of a vehicle's safety features.
Brake components can function properly because each component in them is interrelated and works together.
If a car traveling along a road brakes to stop a certain distance, it requires more braking force if the car has a shorter stopping distance, has more mass, and has more momentum.
Learn more about the best way to use the brake system car here :
https://brainly.com/question/11195875
#SPJ4
What consists of an elemental symbol surrounded by one dot for each of its valence electrons?
The dots represent the valence electrons, and the elemental symbol represents the nucleus and inner electrons. The number of dots in a Lewis dot structure corresponds to the number of valence electrons in an element, which can be determined from the periodic table.
An elemental symbol surrounded by one dot for each of its valence electrons is called an electron dot diagram or a Lewis dot structure. These diagrams are used to represent the valence electrons of an element and to show how elements bond with each other to form compounds.
Learn more about Lewis dot structure here: https://brainly.com/question/20300458
#SPJ4
scenario: a certain first-order reaction is 58 percent complete in 65 seconds. calculate the rate constant for this reaction.
The rate constant for a first-order reaction of a certain first-order reaction is 58 percent complete in 65 seconds is [tex]\frac{-\ln\left(\ln\left(0.42\right)\right)}{65}[/tex].
To calculate the rate constant for a first-order reaction, you need to use the following equation:
The reaction progress can be expressed as a fraction of the initial concentration of the reactant:
[tex]\frac{A}{A_0} = 1 - x[/tex]
where x is the fraction of the reaction that has occurred, and in this case, x = 0.58.
Rearranging the above equation to solve for A:
[tex]A = A_0 - A_0x = A_0(1 - x) = A_0 \cdot 0.42[/tex]
The rate constant can be found by using the equation:
[tex]\ln\left(\frac{A_0}{A}\right) = -kt[/tex]
Plugging in the value of A from step 2 into the above equation:
[tex]\ln\left(\frac{A_0}{A_0 \cdot 0.42}\right) = -kt[/tex]
Simplifying the above equation:
[tex]\ln\left(\frac{1}{0.42}\right) = -kt[/tex]
Using the natural logarithm properties to simplify further:
[tex]\ln\left(\frac{1}{0.42}\right) = \ln\left(\frac{1}{e^{-\ln(0.42)}}\right) = \ln\left(e^{\ln(0.42)}\right) = \ln\left(0.42\right)[/tex]
t = 65 seconds
Solving for k:
[tex]k = \frac{-\ln\left(\frac{1}{0.42}\right)}{t} = \frac{-\ln\left(\ln\left(0.42\right)\right)}{65}[/tex]
We do not know the initial concentration [tex]$A_0$[/tex], so we cannot solve for k exactly. However, we can use the calculated value of k to find the concentration of the reactant at any time during the reaction.
Learn more about the first-order reactions:
https://brainly.com/question/22685249
#SPJ4
What is the energy; in J, of light that must be absorbed by a hydrogen atom to transition an electron from n = 3ton = 7?
A hydrogen atom must absorb 1.815x10⁻¹⁹ Joules of energy in order to transfer electrons from n=3 to n=6.
Let,
Energy absorbed by photon=13.6 z²(1/n₁²-1/n₂²)
E₃₋₆=13.6×1²(1/3²-1/6²)
=(13.6×3/36)ev
E₃₋₆=1.133 eV
to convert energy into J from eV,
E₃₋₆=1.133 eV× 1.602×10⁻¹⁹
E₃₋₆=1.815x10⁻¹⁹ Joules
Electrons are subatomic particles that have a negative electric charge. They are one of the building blocks of matter and are found in the shells that orbit the nucleus of an atom. Electrons play a crucial role in many physical and chemical processes, such as electricity, magnetism, and chemical bonding. They are incredibly tiny, with a mass of about 9.11 x 10⁻³¹ kg and a size of about 10⁻¹⁸ meters. They are also incredibly fast, moving at speeds close to the speed of light. Electrons can be found in a variety of environments, from the atoms that make up the world around us to the free electrons in metals that allow for the flow of electricity.
Learn more about Electrons here:
https://brainly.com/question/9399236
#SPJ4
Na S=0 N H N H2N Sulfadiazine pk, 6.3 Given the pka of sulfadiazine is 6.3, then what would be the ratio of sulfadiazine's (A-)[HA) in blood plasma with a pH = 7.4? Be sure to show your calculations. Edit View Insert Format Tools Table 12pt v Paragraph BIU A & Tv :
The ratio of A- to HA in blood plasma with a pH of 7.4 would be approximately 2.5119 : 1.
The dissociation reaction of sulfadiazine can be represented as follows:
HA ⇌ H+ + A-
Where HA represents the protonated form of sulfadiazine and A- represents the deprotonated form.
The pKa of sulfadiazine is given as 6.3. This means that at pH values below 6.3, sulfadiazine will predominantly exist in its protonated form (HA), while at pH values above 6.3, it will exist mostly in its deprotonated form (A-).
In blood plasma with a pH of 7.4, the ratio of A- to HA can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
Rearranging this equation, we get:
[A-]/[HA] = 10^(pH - pKa)
Substituting the values given:
[A-]/[HA] = 10^(7.4 - 6.3) = 2.5119
Therefore, the ratio of A- to HA in blood plasma with a pH of 7.4 would be approximately 2.5119 : 1.
Learn more about The ratio of sulfadiazine's:
https://brainly.com/question/29579985
#SPJ4
Calculate the root mean square (rms) average speed of the atoms in a sample of argon gas at 0.13 atm and -60.
The RMS speed of the atoms in the sample of argon gas at 0.13 atm and -60°C is[tex]533.5 m/s.[/tex]
Root mean square (RMS) average speed is the average speed of the atoms in a sample of gas, calculated by taking the square root of the average of the squares of the individual speeds. To calculate the RMS speed of argon gas at 0.13 atm and -60°C, we first need to calculate the mean kinetic energy (mKE) of the gas. The mKE can be calculated using the formula [tex]mKE = \frac{3}{2}kT[/tex],
where k is Boltzmann's constant ([tex]1.38 * 10^{-23} J/K[/tex]) and T is the temperature of the gas in Kelvin. At -60°C, the temperature is 213.15 K, so the mKE of the gas is [tex]0.845 * 10^{-21} J.[/tex].
The RMS speed of the atoms can then be calculated using the formula [tex]RMS speed = \sqrt{} (2mKE/m)[/tex], where m is the mass of the atom. The mass of an argon atom is[tex]6.63 * 10^{-26} kg[/tex], so the RMS speed of the atoms in the sample of argon gas at 0.13 atm and -60°C is [tex]533.5 m/s.[/tex]
learn more about argon Refer:brainly.com/question/133359
#SPJ4
which of the following are ways carbon is transferred between the surface and deep ocean? select all that apply.
Carbon is transferred between the surface and deep ocean through a variety of processes, including vertical mixing and diffusion, upwelling, and biological processes such as photosynthesis, respiration, and excretion.
Vertical mixing and diffusion occur when currents and waves mix the surface and deep water layers, allowing carbon to be transferred from one layer to the other. Upwelling is the process of deep ocean water rising to the surface, bringing with it dissolved carbon from the deep ocean. Finally, biological processes such as photosynthesis, respiration, and excretion also move carbon from the surface to the deep ocean.
Learn more about carbon transferred;
https://brainly.com/question/23031731
#SPJ4
Which of the following are ways carbon is transferred between the surface and deep ocean? select all that apply.
diffusionupwellingadvectionphotosynthesisrespiration.Note that the freezing-point-depression constant for any solvent can be calculated as long as the heat of fusion and the freezing point of the solvent is known. Calculate the freezing-point-depression constant (in SI units) for carbon tetrachloride (CCl4), given that its heat of fusion is 2.5 kJ/mol and its freezing point is 250.3 K.
The freezing-point depression constant for [tex]CCl_4[/tex] is [tex]397 K/mol[/tex].
What is freezing-point depression constant?
The freezing-point depression constant ([tex]Kf[/tex]) is a measure of the decrease in the freezing point of a solvent due to the addition of a solute. It is defined as the change in the freezing point of a solvent per unit of molality of solute particles.
it is a colligative property, meaning it depends on the concentration of solute particles in the solvent, but not on their chemical identity. This makes the freezing-point depression constant a useful tool for determining the molality of a solute in a solution, by measuring the change in the freezing point of the solvent.
Calculation of freezing point depression constant
The freezing-point depression constant ([tex]Kf[/tex]) can be calculated using the equation:
[tex]Kf = ΔHf / (mass of solute per unit volume\times i)[/tex]
where, [tex]ΔHf[/tex] is the heat of fusion, "i" is the number of particles of solute dissolved in the solvent and the mass of solute per unit volume can be calculated as the molar mass of the solute divided by the molar volume of the solvent at its freezing point.
For [tex]CCl4,[/tex] its molar mass is [tex]153.82 g/mol[/tex] and its molar volume at its freezing point can be calculated as the molar volume of an ideal gas at that temperature, which is approximately [tex]24.45 cm3/mol.[/tex]
The mass of solute per unit volume can be calculated as:
mass of solute per unit volume = molar mass of solute / molar volume of solvent at freezing point
[tex]= 153.82 g/mol / (24.45 cm3/mol) = 6.29 × 10^-4 g/cm3[/tex]
And the number of particles of solute (i) can be assumed to be 1, since [tex]CCl_4[/tex] is a non-electrolyte and does not dissociate into ions in solution.
The freezing-point depression constant can be calculated as:
[tex]Kf = ΔHf / (mass of solute per unit volume \times i)[/tex]
[tex]= 2.5 kJ/mol / (6.29 \times 10^-4 g/cm3 \times 1) = 397 K/mol[/tex]
To know more about Freezing point depression constant, visit:
https://brainly.com/question/27184453
#SPJ1
why did you choose table salt is the best substance
Table salt is sodium chloride, which gives taste to food items and is easily available in its pure form. It can be easily purified and it is readily soluble in water.
What is table salt ?The chemical compound sodium chloride is used as table salt in food. The formula of sodium chloride is NaCl. It is formed by the ionic bonding between sodium and chlorine.
Sodium metal donates one electron to the electronegative chlorine atom and the electrostatic attraction between positive and negative ions create the ionic bond.
NaCl is easily soluble in water. It can be easily purified using phase separation and distillation methods. NaCl is mostly available from the sea in abundant quantity.
Find more on NaCl:
https://brainly.com/question/4487559
#SPJ1
The magnitude of the electric force between two particles depends on which
factors?
OA. Mass and charge
OB. Charge and distance
OC. Charge and density
D. Mass and distance
Answer:
The magnitude of the electric force between two particles depends on the product of their charges and the inverse of the square of their separation distance.
So, the correct answer is:
OB. Charge and distance.
Answer:
The magnitude of the electrostatic force F between two point charges q1 and q2 is directly proportional to the product of the magnitudes of charges and inversely proportional to the square of the distance between them.
The concentration of the alkane C20H42 in a particular sample of rainwater is 0.13 ppb. Assume that the density of rainwater is close to 1.00 g/mL and find the molar concentration of C20H42.
The molar concentration of alkane C₂₀H₂₄ is 3.6731 x 10 ⁻⁵ M
A chemical species' concentration in a solution, specifically the amount of a solute per unit volume of solution, is measured by its molar concentration. The most used molarity unit in chemistry is the number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units.
The Concentration of alkane C₂₀H₂₄ = 0.13 ppb
since 1 ppb =10⁻³ mg/L concentration of C₂₀H₂₄ is 1.3 x10⁻⁴ mg/L
Density of water = 1.00 g/mL
Molar concentration = mass / (molar mass x Volume)
Formula weight of C₂₀H₂₄= 282.55
Mass C₂₀H₂₄ = 1.3 x10⁻⁴ mg/L =1.3 x10⁻⁷g/L
Molar concentration = mass / (molar mass x Volume)
Molar concentration C₂₀H₂₄ = 1.3 x10⁻⁷g/L / 282.55 g / moles
Molar concentration C₂₀H₂₄ = 3.6731 x 10 ⁻⁵ M
Learn more about molar concentration at https://brainly.com/question/8445654
#SPJ4
how to calculate 100 ton/h to kmol/h
You just need to calculate the following to go from kg/hour to kmol/s: For instance, 1 kmol/h should represent 36 kg with 1 kg/s should equal 1/36 kmol/h if there was 3 kmol in 1 kilogram and 12 seconds in 1 hour.
Is mol the same as KMOL?1000 moles make up one kilomole. 1 Mole: Denotes the quantity of a chemical compound that has the same number of atoms as there are in Twelve grams of natural carbon-12. 103 moles are equivalent to one kilogram, or one kilomole, in the SI system of measurement (metrology).
A Kmol contains how many mmol?mmol↔kmol 1000000 mmol make up 1 kmol.
To know more about kmol visit:
https://brainly.com/question/13346207
#SPJ1
how many grams of aluminim will react fully with 1.25 moles Cl2
2Al+3Cl2->2AlCl3
The number of grams of aluminum that will react fully with chlorine gas is 22.5grams.
How to calculate moles using stoichiometry?Stoichiometry refers to the quantitative relationship between the reactants and products of a specific reaction or equation.
According to this question, aluminium reacts with chlorine gas as follows:
2Al + 3Cl₂ → 2AlCl₃
Based on the above reaction, 2 moles of aluminium reacts with 3 moles of chlorine gas.
1.25 moles of chlorine gas will react with 1.25 × ⅔ = 0.83 moles of aluminum.
mass of aluminum = 0.83 × 27 = 22.5grams of aluminum
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
Which one of the following cannot form a solid with a lattice based on the sodium chloride structure? A) NaBr. B) LiF. C) RbI. D) CuO. E) CuCl2.
The cannot form a solid with a lattice based on the sodium chloride structure is E) CuCl2
Since, NaCl is a linear molecule and it contain only two ions. In the given options, NaBr, LiF, RbIl and CuO all are linear molecules and it contain only two ions. So, NaBr, LiF, Rbl and CuO will form similar lattice to the NaCl. On the other hand in case of CuCl, there are total three ions and it is not linear molecule. So, it will form different lattice but not NaCl based lattice. The crystal lattice of NaCl is face -centered cubic. Sodium Chloride is an alkali halide with an fcc crystal structure. The basis is two ions, a sodium cation and a chlorine anion.
Then the correct option will be (E) CuCl2.
To learn more about face -centered cubic check the link below:
https://brainly.com/question/17111818
#SPJ4
At 27c and 750 mm hg a sample of hydrogen occupies 5.00l how much space will it occupy at stp
Considering the ideal gas law, the gas will ocuppy a volume of 0.0299 L at STP.
Definition of ideal gas lawAn ideal gas is a gas made up of certain particles that, despite having a random displacement, do not interact with each other, having perfect elastic collisions without suffering attraction or repulsion. These gases are known as ideal because they have only been described theoretically, although they are useful for the analysis of real gases.
An ideal gas can be fully described by the ideal gas equation:
P×V = n×R×T
Where:
P is the gas pressure.V is the volume that occupies.T is its temperature.R is the ideal gas constant. The universal constant of ideal gases R has the same value for all gaseous substances. n is the number of moles of the gas.Definition of STP conditionsThe STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
Volume at STPIn first place, you know:
P= 750 mmHg= 0.00657895 atm (760 mmHg= 1 atm)V= 5 Ln= ?R= 0.082 (atmL)/(molK)T= 27 C= 300 K (being 0 C= 273 K)Replacing in the ideal gas law:
0.00657895 atm× 5 L = n× 0.082 (atmL)/(molK)× 300 K
Solving:
(0.00657895 atm× 5 L)÷ (0.082 (atmL)/(molK)× 300 K)= n
1.337×10⁻³ moles= n
This number of moles will be the same although you change the pressure and temperature. For STP, you know:
P= 1 atmV= ?n= 1.337×10⁻³ molesR= 0.082 (atmL)/(molK)T= 0 C= 273 KReplacing in the ideal gas law:
1 atm× V= 1.337×10⁻³ moles× 0.082 (atmL)/(molK)× 273 K
Solving:
V= (1.337×10⁻³ moles× 0.082 (atmL)/(molK)× 273 K)÷ (1 atm)
V= 0.0299 L
Finally, the volume will be 0.0299 L.
Learn more about Ideal Gas Law:
https://brainly.com/question/4147359
#SPJ1
A solution is prepared by mixing 1.28 mol C7H16, 2.92 mol C8H18, and 2.64 mol C9H20. What is the (a) mole fraction and (b) mole percent of each component of the solution?
Mole fraction is indeed a unitless phrase since it represents a ratio. Therefore, 0.18 is the mole fraction of C[tex]_7[/tex]H[tex]_{16}[/tex].
What is mole fraction?Mole fraction is a concentration unit defined as the amount of moles of a constituent divided by the total amount of moles of a solution. Mole fraction is indeed a unitless phrase since it represents a ratio.
When the mole fractions of all constituents of a solution are put together, the result is 1. The molar ratio of acetone in a solution containing 1 mol toluene, 2 mol tetrachloroethylene, as well as 7 mol acetone is 0.7.
mole fraction of C[tex]_7[/tex]H[tex]_{16}[/tex] = 1.28/ (1.28+ 2.92+ 2.64)= 1.28/ 6.84=0.18
mole fraction of C[tex]_8[/tex]H[tex]_{18}[/tex]=2.92/ (1.28+ 2.92+ 2.64)=2.92/6.84=0.42
mole fraction of C[tex]_9[/tex]H[tex]_{20}[/tex]= 2.64/ (1.28+ 2.92+ 2.64)=2.64/ 6.84 = 0.38
Therefore, 0.18 is the mole fraction of C[tex]_7[/tex]H[tex]_{16}[/tex].
To learn more about mole fraction, here:
https://brainly.com/question/29808190
#SPJ1
Write the chemical symbols for three different atoms or atomic anions with 17 electrons
Three different atoms or atomic anions with 17 electrons are:
Chlorine (Cl)Fluorine (F)Bromine (Br)What is an atomic anions?An atomic anion is an ion that consists of a single atom with a negative charge. The charge results from the atom gaining one or more electrons, which gives it a surplus of electrons and a net negative charge. Atomic anions are commonly found in ionic compounds, where they bond with positive ions (cations) to form a neutral compound.
Therefore, the chemical symbols for three different atoms or atomic anions with 17 electrons are CI, F, and Br.
learn more about atomic anions: https://brainly.com/question/27549142
#SPJ1
Answer: Cl, S-, P2-
Explanation:
Begin by thinking of an atom which is uncharged or neutral. In this case, the number of protons in the atom must equal the number of electrons. That would give the atom 17 protons and make it an atom of element 17.
A neutral atom of sulfur has 16 protons and 16 electrons. That's one less electron than you want. However, a sulfur anion with a charge of -1 has 16 protons and electrons. So this is a second possible answer.
Similarly, an atom of phosphorus with a charge of -2 would have 15 protons and 17 electrons.
A nonapeptide was determined to have the following amino acid composition: (Arg)2, (Gly)2, (Phe)2, His, Leu, Met. 1-fluoro-2,4-dinitrobenzene (FDNB) reacts with free amino (but not amido or guanidino) groups in proteins to produce dinitrophenyl (DNP) derivatives of amino acids. The native peptide was incubated with 1-fluoro-2,4-dinitrobenzene (FDNB) and then completely hydrolyzed; 2,4-dinitrophenylhistidine was identified by HPLC. What does this tell you about the peptide sequence? When the native peptide was exposed to cyanogen bromide (CNBr), an octapeptide and free glycine were recovered. What does this tell you about the peptide sequence? Incubation of the native peptide with trypsin gave a pentapeptide, a tripeptide, and free Arg.The peptides were separated and treated with FDNB. 2,4-Dinitrophenyl-histidine was recovered from the pentapeptide, and 2,4-dinitrophenylphenylalanine was recovered from the tripeptide.What does this tell you about the peptide sequence? Digestion with the enzyme pepsin produced a dipeptide, a tripeptide, and a tetrapeptide. The tetrapeptide was composed of (Arg) 2, Phe, and Gly. What does this tell you about the peptide sequence? What is the sequence of the nonapeptide?
The information provided tells us that the peptide sequence contains a histidine residue at some position.
This information indicates that the peptide sequence contains a histidine residue, which is covalently modified by FDNB to form 2,4-dinitrophenylhistidine. The fact that the histidine residue is modified by FDNB suggests that it is in the free amino form, rather than being part of an amide or guanidino group.
This is because FDNB reacts with free amino groups, but not with amido or guanidino groups. The presence of a histidine residue in the peptide sequence can provide information about the functional and structural properties of the peptide, as histidine is known to play important roles in protein structure and function.
Learn more about peptide sequence brainly.com/question/30505255
#SPJ4
If a particular solution process is endothermic, then it will be accompanied by ___ in the disorder of the system.
If a particular solution process is endothermic, then it will be accompanied by temperature changes in the disorder of the system.
What is endothermic?An endothermic reaction is a chemical reaction in which the reactants have a low enthalpy, but produce products with a high enthalpy. Because the enthalpies of the reactants are low, the system requires additional energy to release bonds so that heat absorption occurs from the surrounding environment to the system. This causes a decrease in temperature in an endothermic reaction.
So if there is a solution that has endothermic properties it will be accompanied by a disturbance of the temperature changes system.
Learn more about the difference between endothermic and exothermic chemical reactions here :
https://brainly.com/question/10373907
#SPJ4
Organic chemists often purify organic compounds by a method known as fractional crystallization. An experimenter wanted to prepare and purify 4.85 g of aniline. Ten 4.85-gram specimens of aniline were prepared and purified to produce acetanilide. The following dry yields were obtained: 3.85, 3.88, 3.90, 3.62, 3.72, 3.80, 3.85, 3.36, 4.01, 3.82. Construct a 95 percent confidence interval for the mean number of grams of acetanilide that can be recovered from 4.85 grams of aniline.
To construct a 95 percent confidence interval for the mean number of grams of acetanilide that can be recovered from 4.85 grams of aniline, we need to first find the mean, standard deviation, and sample size of the data.
Given the dry yields of 10 specimens, the mean can be calculated as (3.85 + 3.88 + 3.90 + 3.62 + 3.72 + 3.80 + 3.85 + 3.36 + 4.01 + 3.82) / 10 = 3.79 grams. The standard deviation can be calculated using the formula: sqrt(sum of squares of deviations from the mean / (n - 1)), where n is the sample size.
Once we have the mean and standard deviation, we can use the t-distribution to find the 95 percent confidence interval. The t-value can be looked up in a t-table given the degrees of freedom, which is n - 1. The confidence interval is then calculated as mean ± t-value × standard deviation / sqrt(n).
This interval gives us an estimate of the mean yield of acetanilide that we can expect to obtain with a 95 percent confidence. It also gives us an idea of the precision of our estimate, as the width of the interval gives us an idea of the variability in the data.
Learn more about acetanilide:
brainly.com/question/14562247
#SPJ4
what do the Irish traditionally treat fevers?
the Irish traditionally believe in treating fevers with what on dry sugar?
Answer: Spirit
Explanation:
i looked it up and there was a quizlet that asked the same question.
1.SEP Communicate Information In addition
to properties of elements, list at least two other
things or events that are periodic.
Other happenings that are also in periods would be: tides and biological rhythms.
What events are in periods?There are many things and events that exhibit periodicity, or a repeating pattern over time. Some examples include:
Tides: The rise and fall of sea levels due to the gravitational pull of the moon and the sun on Earth's oceans. Tides follow a predictable pattern and repeat every 12 hours and 25 minutes.
Biological Rhythms: Many living organisms have internal biological clocks that regulate various physiological processes such as sleep, hunger, and hormone secretion. These rhythms repeat in a periodic manner, such as the 24-
Read more on periodic table here:https://brainly.com/question/15987580
#SPJ1
Which of the following is an example of an extensive property of a substance?
A. mass
B. temperature
C. length
D. volume
Why is it advisable to run a mixed melting point determination on samples of two different compositions before concluding that the two compounds are identical?
It is advisable to perform a mixed melting point determination to accurately identify an unknown compound.
If the two compounds have different melting points, then it is likely that they are not the same compound. However, if the two compounds have nearly identical melting points, then it is possible that they are the same compound but with different levels of impurities.
A mixed melting point determination involves testing a sample of each compound together, and if the melting point of the mixture is identical to the melting point of either of the two compounds, then it can be concluded that the two compounds are the same.
Learn more about melting point :
https://brainly.com/question/40140
#SPJ4
Which choice identifies the limiting reactant
and correct reasoning?
4A1+302 → 2Al2O3
AI —> initial mass 162
—> theoretical yield Al2O3 306
0₂ —> initial mass 97
—> theoretical yield Al2O3 206
A. O2 because it produces a lower theoretical yield.
B. Al because it produces a larger theoretical yield.
C. O2 because it starts with a lower mass.
D. Al because it has a higher initial mass.
The limiting reactant is O2 because it produces a lower theoretical yield. Option A.
Limiting reactantTo identify the limiting reactant, we need to compare the amount of product that can be produced from each reactant, based on the balanced chemical equation and the amount of each reactant that is available.
Using the given information, we can calculate the amount of product that can be produced from each reactant:
For Al:
The molar ratio of Al to Al2O3 is 4:2, or 2:1.
The number of moles of Al is: 162 g / 26.98 g/mol = 6.00 mol.
The theoretical yield of Al2O3 from Al is: 6.00 mol Al x (2 mol Al2O3 / 2 mol Al) x (101.96 g Al2O3 / 1 mol Al2O3) = 611 g Al2O3.
For O2:
The molar ratio of O2 to Al2O3 is 3:2.
The number of moles of O2 is: 97 g / 32.00 g/mol = 3.03 mol.
The theoretical yield of Al2O3 from O2 is: 3.03 mol O2 x (2 mol Al2O3 / 3 mol O2) x (101.96 g Al2O3 / 1 mol Al2O3) = 205 g Al2O3.
Comparing the theoretical yields of Al2O3 from Al and O2, we can see that the theoretical yield of Al2O3 from Al (611 g) is greater than the theoretical yield of Al2O3 from O2 (205 g). Therefore, the limiting reactant is O2, since it will be completely consumed before all of the Al is used up.
The correct answer is A. O2 because it produces a lower theoretical yield.
More on limiting reactants can be found here: https://brainly.com/question/14225536
#SPJ1
Determine if each statement is True or False and put True or False in the blank. A-COOH group is considered an alcohol and a ketone as well as a carboxylic acid. Alcohols, ethers, and esters all contain O atoms. Amides contain a CEO and a C-N on the same carbon. Esters, amides, carboxylic acids and nitriles all contain C=O groups. Alkenes, alkynes, and aromatics are all types of hydrocarbons. Alkanes typically have the formula CnH2n.
A). The statement is False.
B). The statement is True.
C). The statement is True.
D). The statement is False.
E). The statement is True.
F). The statement is False.
In organic chemistry, a hydrocarbon is an organic compound consisting entirely of hydrogen and carbon.: 620 Hydrocarbons are examples of organization 14 hydrides. Hydrocarbons are normally colorless and hydrophobic; their smell is typically faint and may be much like that of gasoline or lighter fluid. They occur in a various variety of molecular structures and stages: they may be gases (such as methane and propane), liquids (including hexane and benzene), low melting solids (such as paraffin wax and naphthalene), or polymers (which include polyethylene and polystyrene).
within the fossil gas industries, hydrocarbon refers to evidently taking place petroleum, herbal gas, and coal, or their hydrocarbon derivatives and purified paperwork. The combustion of hydrocarbons is the principal source of the world's energy. Petroleum is the dominant raw-material source for natural commodity chemical compounds such as solvents and polymers. maximum anthropogenic (human-generated) emissions of greenhouse gases are both carbon dioxide released with the aid of the burning of fossil fuels, or methane launched from the coping with natural gas or from agriculture.
To learn more about Hydrocarbons visit here:
brainly.com/question/17578846
#SPJ4