Explanation:
Moles of Barium hydroxide = 0.156dm³ * (0.247mol/dm³) = 0.0385mol.
Mass of Barium hydroxide = 0.0385mol * (171.346g/mol) = 6.60g.
Answer:
6.60
Explanation:
Nitrogen gas is cooled and its volume went
from 375 mL to 255 mL. If the final
temperature is -45 °C, what was the original
temperature?
Isaac Newton lived and developed his Laws of Motion during which time period?
Answer:
saac Newton was a physicist and mathematician who developed the principles of modern physics, including the laws of motion and is credited as one of the great minds of the 17th-century Scientific Revolution.
Education: The King's School, University of Ca...
Birth Date: January 4, 1643
Death Date: March 31, 1727
Explanation:
Isaac Newton was a physicist and mathematician who developed the principles of modern physics, including the laws of motion and is credited as one of the great minds of the 17th-century Scientific Revolution.
hope it helps have a great day
If a sample of air in a closed, rigid container was heated, would the partial pressure of oxygen increase, decrease or remain the same?
Answer:
increase
Explanation:
To solve this problem, you simply have to apply the Ideal Gas Law. Using this equation, we know that the pressure is directly proportional to the temperature. Thus, as something is heated (i.e. its temperature is increasing), its pressure would increase as well.
what about solids ? Do solids move around like liquids and gases ?
Answer:
No, gases move freely all over the place, liquids move more freely but in a more contained area, and solids the molecules are rigid, at the most the movement is small vibration as the molecules put pressure on one another to hold their form and stay in place.
Examine the EM spectrum chart. Describe what is happening as the EM spectrum goes
from Radio Waves to Gamma rays,
Vight
Uno
Somme
Morowaves
Infrared
Radio Waves
Woman
w
w
Wavelength
The amplitude increases
The wavelength increases
The wavelength decreases
The amplitude decreases
Answer:
The wavelength decreases
Explanation:
As you go along the EM spectrum from radio waves to gamma rays, the wavelength decreases as the wave's energy and frequency increase.
A student mixes two chemicals in a test tube. She notices that the mixture starts to bubble and the test
tube feels very warm. The student most likely concludes that the mixture is-
F. a chemical reaction that happened too quickly.
G. an endothermic reaction that absorbed thermal energy.
H. an exothermic reaction that released thermal energy.
J. not a chemical reaction.
Answer:
H. an exothermic reaction that released thermal energy.
Explanation:
The student will most conclude that this is a chemical reaction in which thermal energy is released to the environment.
Such reactions accompanied by the release of thermal energy are exothermic reactions.
In an exothermic change, heat is liberated to the surrounding. The surrounding becomes hotter at the end of the changes. For such reaction we say that enthalpy change is negative.For endothermic reactions, heat is absorbed. At the end of the reaction, the system is cold.
5. Calculate the time required to deposit 0.37g of Silver from a silverNitrate solution using a current of 2.5A( Charge of Ag in AgNO3 is + 1)
Time required : 132.2 s
Further explanationGiven
mass of Silver = 0.37 g
current = 2.5 A
Required
time do deposit
Solution
Faraday's Law :
[tex]\tt W=\dfrac{e.i.t}{96500}[/tex]
e = ar/valence (valence Ag = 1)
i = current
t = time = s
[tex]\tt 0.37~g=\dfrac{108/1\times 2.5~A\times t }{96500}\\\\t=132.2~s[/tex]
If a cake recipe requires 25g of sugar, how much sugar will the baked cake contain
What signs of a chemical reaction did you observe during the lab? Check all that apply.
color change
temperature change
mass change
formation of a gas
formation of a solid
formation of a liquid
Answer:
1, 4, 5
Explanation:
1 - Color Change
4 - Formation of Gas
5 - Formation of Solid
(correct on ed)
Answer: A, D , E
Explanation:
QUICK
Which of these is a ball and stick model?
if hydrochloride tablets and MP4 format you find the attachment photograph and signature
answer is attached in the image below
Answerme espanol amigo me
Explanation:
What object do you think will take up
more space? Why do you think this?
Answer:
solids
Explanation:
BC they r heavier than liquid and gas
what is the boiling point of carbon?
Answer: 3915 K (3642 °C, 6588 °F)
Answer:
8,721°F
OR
4,827°C.
Explanation:
Good Luck!
Consider the reaction: 2AB2 → A2 + 2B2 You start with one mole of AB2 and the reaction is done at constant pressure of 3.7 atm and 28.2 °C. Assume all gases behave like ideal gases. What is the value of the work (in J)?
Answer:
-2503.2J
Explanation:
At constant pressure, change in work follows the equation:
W = -P*ΔV
Where W is work, P is pressure (3.7atm) and ΔV is change in volume
We can obtain change in volume using ideal gas low:
ΔV = ΔnRT/P
Where Δn is change in moles (3moles of products - 2 moles of reactants = 1)
R is gas constant (0.082atmL/molK)
T is absolute temperature (28.2°C + 273.15 = 301.35K)
P is pressure (3.7atm)
ΔV = ΔnRT/P
ΔV = 1mol*0.082atmL/molK*301.35K/3.7atm
ΔV = 6.69L
And work is:
W = -3.7atm*6.69L
W = -24.71atmL
1atmL = 101.3J
-24.71atmL * (101.3J / 1atmL) =
-2503.2J
The element in group 4 and period 3
What variable represents specific heat in the equation Q = mcAT?
O A. The variable c
OB. The variable T
O C. The variable m
O D. The variable Q
Answer: A. The variable c
============================================
Explanation:
Q = heat transferred
m = mass
c = specific heat
[tex]\Delta T[/tex] = delta T = change in temperature
help me please... tyy if you do :))
Answer:
a) HCl
Explanation:
As we know, that HCl or Hydrogen Chloride is a diatomic compound. It is formed due to the Chemical reaction of Hydrogen and Chlorine. As both Hydrogen and Chlorine have valencies of 1, the Net Valency of the Compound HCl is 1 itself. This separates it from the rest of the compounds. The rest of the compounds need to have more than 2 atoms of each kind and have different valencies too.
Which has a higher melting point KF or NaF?
Answer:
NaF
Explanation:
Melting point of NaF is 993°C but Melting point of KF is 858°C
Answer:
I think naf
Explanation:
Please select the word from the list that best fits the definition left standing after the collapse of a sea arch
Answer:
Sea Stack
Explanation: :)
Answer:
A
Explanation:
I HAVE 5 minutes HELP!!
Which organelle accurately completes the chart?
O lysosome
O cell wall
O vacuole
O endoplasmic reticulum
Answer:
endoplasmic reticulum
Explanation:
Endoplasmic reticulum will complete the chart. The Endoplasmic reticulum is one type of organelle that is present in eukaryotic cells. They form a network that is interconnected with membrane-enclosed sacs or structures that are tube shaped and are called cisternae.
En un recipiente cerrado a 25°C disponemos de un gas sometido a una presión de 250.000 Pa. Luego, sin que cambie el volumen, conseguimos una presión de 350.000 Pa. ¿a qué temperatura habremos tenido que calentar el gas?.
Answer:
El gas se calentó a 35°C
Explanation:
Para resolver este problema es necesario aplicar la Ley de Gay Lussac donde en una situación en la que un gas no modifica su volumen, su temperatura será directamente proporcional a la presión.
Podemos pensar que se describe desde la Ley de Gases Ideales donde:
P . V = n . R . T
para la situacion 1
y P . V = n . R . T para la situacion 2
Como V, n y R son constantes:
P₁ / T₁ = P₂ / T₂
250000 Pa / 25°C = 350000 Pa / T₂
T₂ = 350000 Pa . 25°C / 250000 Pa → 35°C
Which substance below has the greatest intermolecular forces?
O oxygen with a boiling point of -183°C
O water with a boiling point of 100°C
O gold with a boiling point of 2,970°C
O mercury with a boiling point of 357°C
Answer:
Oxygen with a boiling point of -183°C.
Explanation:
Higher the intermolecular forces between the liquid particles, more durable it's for it to flee into the vapor part,you would like a lot of energy to convert it from liquid to the vapor part, in different words, higher its boiling point.
Hope it helps!<3
A sample of water with a mass of 27.56g and an unknown temperature loses 2443 Joules. If the final temperature is found to be 62.50 C. What was the initial temperature?
Answer:
41.3 °C
Explanation:
From the question given above, the following data were obtained:
Mass (M) of water = 27.56 g
Heat (Q) loss = 2443 J
Final temperature (T2) = 62.5 °C
Initial temperature (T1) =?
NOTE: The specific heat capacity (C) of water is 4.18 J/g°C
Thus, we can obtain the initial temperature of the water by using the following formula:
Q = MC(T2 – T1)
2443 = 27.56 × 4.18 (62.5 – T1)
2443 = 115.2008 (62.5 – T1)
Divide both side by 115.2008
2443 / 115.2008 = (62.5 – T1)
21.20645 = 62.5 – T1
Collect like terms
21.20645 – 62.5 = – T1
– 41.3 = – T1
Divide both side by – 1
– 41.3 /– 1= – T1 / –1
41.3 = T1
T1 = 41.3 °C
Thus, the initial temperature of the water was 41.3 °C
In order to determine if 2 atoms are cooper what must be the same for each
What is the percent composition by mass for hydrogen in water (H2O)?
% H =(_____/_____)x100%=______ % H
Explanation:
Percentage composition = 2/18 = 11.11%.
What is the percent composition by mass for sodium (Na) in sodium phosphate (Na3PO4)? % Na = (______/______)x100% = _______% NNA
The percent composition by mass for sodium (Na) in Sodium phosphate (Na₃PO₄) : 42.07%
Further explanationGiven
Compound of Sodium phosphate (Na₃PO₄)
Required
The percent composition by mass for sodium (Na)
Solution
The Comparative Law (Proust ) : compounds are formed from elements with the same Mass Comparison
MW Na₃PO₄ = 163,94 g/mol
Ar Na=22,989769g/mol
[tex]\tt \%mass~Na=\dfrac{3.Ar~Na}{MW~Na_3PO_4}\times 100\%\\\\\%mass~Na=\dfrac{3\times 22.99}{163.94}\times 100\%\\\\\%mass~Na=42.07\%~Na[/tex]
Write your thoughts or ideas about the lesson on types of soil.
Answer:
There are different types of soil in the earth. Those different types of soil helps the earth stay healthy in many ways!! Just like the different layers in the earth. There are so many different layers in the earth so that the plants get the different nutrition they need. Not only that but it cleans the water that soaks in the ground.
There are 6 different types of soil, they are; sandy soil, clay soil, silt soil, peat soil, chalk soil, and loam soil.
Explanation:
Sandy soil
Sandy Soil is light, warm, dry and tend to be acidic and low in nutrients. Sandy soils are often known as light soils due to their high proportion of sand and little clay (clay weighs more than sand). These soils have quick water drainage and are easy to work with. They are quicker to warm up in spring than clay soils but tend to dry out in summer and suffer from low nutrients that are washed away by rain. The addition of organic matter can help give plants an additional boost of nutrients by improving the nutrient and water holding capacity of the soil.
Clay Soil
Clay Soil is a heavy soil type that benefits from high nutrients. Clay soils remain wet and cold in winter and dry out in summer. These soils are made of over 25 percent clay, and because of the spaces found between clay particles, clay soils hold a high amount of water. Because these soils drain slowly and take longer to warm up in summer, combined with drying out and cracking in summer, they can often test gardeners.
Silt Soil
Silt Soil is a light and moisture retentive soil type with a high fertility rating. As silt soils compromise of medium sized particles they are well drained and hold moisture well. As the particles are fine, they can be easily compacted and are prone to washing away with rain. By adding organic matter, the silt particles can be bound into more stable clumps.
Peat Soil
Peat soil is high in organic matter and retains a large amount of moisture. This type of soil is very rarely found in a garden and often imported into a garden to provide an optimum soil base for planting.
Chalk Soil
Chalk soil can be either light or heavy but always highly alkaline due to the calcium carbonate or lime within its structure. As these soils are alkaline they will not support the growth of ericaceous plants that require acidic soils to grow. If a chalky soil shows signs of visible white lumps then they can’t be acidified and gardeners should be resigned to only choose plants that prefer an alkaline soil.
Loam Soil
Loam soil is a mixture of sand, silt and clay that are combined to avoid the negative effects of each type. These soils are fertile, easy to work with and provide good drainage. Depending on their predominant composition they can be either sandy or clay loam. As the soils are a perfect balance of soil particles, they are considered to be a gardeners best friend, but still benefit from topping up with additional organic matter.
Those are the different types of soils with all of their many uses. I hope this helps!!!!! Have a wonderful day!!!
Which statement is true about water's density and the survival of marine life? view attachment
Oil and water placed in a jar will separate. Even when shaken and mixed, the oil still separates from the water.
Which best describes oil and water?
Oil and water are highly soluble because they have separate chemical properties.
Oil and water have a low solubility because they have separate chemical properties.
Oil and water are highly soluble because they exert different pressures.
Oil and water have a low solubility because they exert different pressures.
Answer:
Probably B?
Explanation:
I don't have one...
Hope it helps I guess..
Answer: i think is B
Explanation: HATE ME IF IM WRONG
HELP PLSSS FASTTTTTT!!!!!!!!!!!!!!!!
Answer:
with what?
Explanation: