In the metric system, a milligram equals one gram. a unit being used measuring systems to express weight and mass.
How would a gram have weight or mass?Not weight but mass is measured in milligrams. Mass would be a measurement of how much matter an object contains, whereas weight relates to the earth's gravitational pull on it. Knowing an object's mass is essential since it allows you to determine how so much effort will be needed to move it.
What dimensions does a gram have?A gram is a unit of mass equal to one thousandth of a kilogram, or roughly the amount of one cubic millimeter of water.
To know more about gram visit:
https://brainly.com/question/11260752
#SPJ4
The reagents _____ and FeCl3 are required for the chlorination of benzene via electrophilic aromatic substitution
The reagents HCL and FeCl3 are required for the chlorination of benzene via electrophilic aromatic substitution.
What is the chlorination?
Chlorination is a chemical process in which one or more chlorine atoms are introduced into a molecule. In the context of benzene, chlorination refers to the reaction of benzene with HCl and FeCl3 to produce chlorobenzene via electrophilic aromatic substitution. In this reaction, the chlorine atom acts as an electrophile and reacts with the electron-rich aromatic ring of benzene, leading to the substitution of a chlorine atom for one of the hydrogen atoms in the ring.
Here you can learn more about chlorination
brainly.com/question/3308458
#SPJ4
As the number of bonds between two carbon atoms increases, which of the following decreases? O the number of electrons between the carbon atoms only O the bond length and the bond energy O the bond energy only O the bond energy and the number of electrons between the carbon atoms O the bond length only
As the number of bonds between two carbon atoms increases, the bond length decreases.
What happens as the bond number between two carbon atoms increases?As the number of bonds between two carbon atoms increases, then the bond length decreases.
The bond energy also increases with the number of bonds between the carbon atoms. The number of electrons between the carbon atoms does not change with the number of bonds, but rather depends on the valence electrons of the carbon atoms themselves.
C-C bond has longest covalent bond distance. Among, C, N, O and H, covalent radius of C is maximum. Non polar bond length is higher than the polar bond length.
To know more about bond length, refer
https://brainly.com/question/16012396
#SPJ4
the equation and standard cell potential for the decomposition of h2o2
The cell will oxidize the half-cell with the smaller reduction potential. If those conditions hold, the total cell potential will be positive. For a cell's redox reaction to occur spontaneously in the opposite direction, the cell potential must be positive.
What is the standard cell potential for the decomposition?Standard Cell Potential Calculation. The standard cell potential (E° cell) for a redox reaction measures the propensity of reactants in their standard states to create products in their standard state.
It measures the reaction's driving power, which we previously referred to as voltage.
Therefore, 1) +0.68 V t is the standard reduction potential for the half reaction 2) ΔG° < 0 and Keq > 1 is true for the decomposition of H2O2(aq)
Learn more about cell potential here:
https://brainly.com/question/29653954
#SPJ4
The above question is incomplete. The complete question is given below:
2H2O2(aq) → 2H2O(l) + O2(g) E° = 0.55 V
The equation and standard cell potential for the decomposition of H2O2(aq) in acidic solution at 25℃ is given above. The reduction half reactions for the process are listed below.
O2(g) + 4H+(aq) + 4e→ 2H2O(l) E° = 1.23 V
O2(g) + 2H+(aq) + 2e→ H2O2(aq) E° = ?
1) O2(g) + 2H+(aq) + 2e→ H2O2(aq)
What is the standard reduction potential for the half reaction represented above?
2) Which of the following is true for the decomposition of H2O2(aq)?
The cell will oxidize the half-cell with the smaller reduction potential. If those conditions hold, the total cell potential will be positive. For a cell's redox reaction to occur spontaneously in the opposite direction, the cell potential must be positive.
What is the standard cell potential for the decomposition?Standard Cell Potential Calculation. The standard cell potential (E° cell) for a redox reaction measures the propensity of reactants in their standard states to create products in their standard state.
It measures the reaction's driving power, which we previously referred to as voltage.
Therefore, 1) +0.68 V t is the standard reduction potential for the half reaction 2) ΔG° < 0 and Keq > 1 is true for the decomposition of H2O2(aq)
Learn more about cell potential here:
brainly.com/question/29653954
#SPJ4
The above question is incomplete. The complete question is given below:
2H2O2(aq) → 2H2O(l) + O2(g) E° = 0.55 V
The equation and standard cell potential for the decomposition of H2O2(aq) in acidic solution at 25℃ is given above. The reduction half reactions for the process are listed below.
O2(g) + 4H+(aq) + 4e→ 2H2O(l) E° = 1.23 V
O2(g) + 2H+(aq) + 2e→ H2O2(aq) E° = ?
1) O2(g) + 2H+(aq) + 2e→ H2O2(aq)
What is the standard reduction potential for the half reaction represented above?
2) Which of the following is true for the decomposition of H2O2(aq)?
Draw the final product of this series of reactions. 1. SOCI2 2. NaCN OH • Use the wedge/hash bond tools to indicate stereochemistry where it exists. • If more than one product is possible, only draw the major product. • If the reaction produces a racemic mixture, draw both stereoisomers. • Separate structures with + signs from the drop-down menu.
SOCI2 is sulphonyl chloride is a chlorinating reagent ,
What is chlorinating reagent ?
Additionally, the production of allyl and benzyl chlorides frequently involves radical chlorination.
Several chlorinating agents have the capacity to function as both electrophilic and radical sources of Cl, depending on the circumstances of the reaction and the presence or absence of radical initiators, such as chemical or light initiators.
What kind of chemical is utilized in chlorination?
There have been various instances where sodium chlorite has been utilized as a chlorinating reagent.
As a result, benzene gave modest yields of chlorobenzene (20%) while mesitylene underwent monochlorination in 95% yields when combined with trichloroacetic acid (which produces chlorous acid, HOClO, in situ) 1999M1493>.
Learn more about chlorinating reagent
brainly.com/question/7156015
#SPJ4
What is the mass of potassium nitrate that is produced when 2.04 moles of potassium phosphate react?
As per the balanced reaction, one mole or 212.7 g of potassium phosphate gives 3 moles or 303.3 g of potassium nitrate. Then, 2.04 moles or 433 g of potassium phosphate is 619.1 g.
What is potassium nitrate ?Potassium nitrate is an ionic compound formed by donating electrons from the potassium metal to the nitrate group.
As per the given reaction, 1 mole of potassium phosphate gives 3 moles of potassium nitrate.
molar mass of potassium phosphate = 212. 2 g
molar mass of potassium nitrate = 101.1 g
mass of 3 moles of potassium nitrate = 303.3 g.
Mass of 2.4 moles of potassium phosphate = 2.4 ×212. 2 g = 433.3 g.
Then, the mass of potassium nitrate formed by 433.3 g of potassium phosphate is :
(433.3 g× 303.3 g)/212.7 g = 619.1 g
Therefore, the mass of potassium nitrate is 619.1 g.
Find more on potassium nitrate:
https://brainly.com/question/15080595
#SPJ1
Your question is incomplete. But your complete question is:
K3PO4 + Al(NO3)3 → 3KNO3 + AlPO4
a. What is the mass of potassium nitrate that is produced when 2.04 moles of potassium phosphate react?
Select all paramagnetic species.
Group of answer choices:
- atomic sodium
- iron(III) ion
- fluoride ion
- calcium(II) ion
- zinc(II)
Paramagnetic species are fluorine , calcium , iron(III) ion . Atomic sodium and zinc(II) are diamagnetic species.
Elaborating :Compounds that are paramagnetic always have one or more unpaired electrons that are drawn to the magnetic poles.
Because one of the remaining p orbitals of fluorine contains an unpaired electron, the element is paramagnetic in this case.
Sodium is diamagnetic, and Zn(II) is diamagnetic because it has all paired electrons. Calcium(II) is assumed to be paramagnetic because it excites one electron from its s-orbital to its exctied d-orbital. Iron(III) is paramagnetic because it needs unpaired electrons.
How does paramagnetic work?Substances with impaired electrons that are attracted by a magnetic field are called paramagnetic. In the absence of a magnetic field, they lose their magnetism. The substance's magnetic moment and, consequently, its paramagnetism increase with the number of unpaired electrons.
Why is it referred to as paramagnetic?The majority of atoms with incompletely filled atomic orbitals are paramagnetic, with the exception of copper, due to the presence of unpaired electrons in the material. Unpaired electrons have a magnetic dipole moment and behave like tiny magnets because of their spin.
Learn more about paramagnetic:
brainly.com/question/13162002
#SPJ4
How many set(s) of magnetically non-equivalent protons are found in (CH3)2CHCH2CH2CI?
a) 3
b) 4 c) 5 d) 7 e) 11
Option B. 4. The molecule (CH3)2CHCH2CH2CI has 4 magnetically non-equivalent protons. These protons are found on the methylene (-CH2-) and methine (-CH-) groups in the molecule.
The symmetry of the molecule and the coupling between the protons can lead to some protons being magnetically equivalent, meaning that they have the same chemical shift and coupling constants. However, there are 4 distinct sets of protons in this molecule that are magnetically non-equivalent. In the molecule (CH3)2CHCH2CH2CI, there are 4 sets of magnetically non-equivalent protons, each having a different chemical environment and hence a different magnetic environment. These protons can be found on the carbon atoms that are bonded to different number of hydrogens and other atoms.
To learn more about non-equivalent protons please click on below link.
https://brainly.com/question/28480636
#SPJ4
what is the relationship between oxidation number and electronegativity?
The oxidation number and electronegativity are two different concepts in chemistry.
The oxidation number is a number assigned to an element in a chemical compound to indicate the degree of oxidation or reduction of the element. It reflects the charge an element would have if the compound were completely ionic.
Electronegativity is a measure of the ability of an atom in a molecule to attract electrons towards itself. It reflects the strength of an atom's hold on electrons in a covalent bond.
There is a correlation between oxidation number and electronegativity in the sense that elements with high electronegativity tend to have high oxidation numbers. For example, in a compound with a positive oxidation number, the more electronegative element will typically have a higher oxidation number than the less electronegative element. However, this is not a strict rule, as other factors such as the size of the element and the nature of the chemical bond also play a role.
In summary, while there is a relationship between oxidation number and electronegativity, they are two distinct concepts in chemistry with different definitions and applications.
Learn more about oxidation here:
https://brainly.com/question/2525090
#SPJ4
Methyl red has a pKa of 5.0 and is red in its acid form and yellow in its basic form. If 0.120 M HCl is slowly added to the 24.0-mL sample of 0.120 M NaOH, in what pH range will the indicator change color?
As 0.120 M HCl is gradually added to a 24.0 mL sample of 0.120 M NaOH, the Methyl Red indicator will change colour in the pH range between 5.0 and 7.0. The indicator will transition from its yellow basic form to its red acid form as the pH decreases from its starting value of 13.0 to 7.0.
The pKa value and the associated colours of the indicator in its acidic and basic versions can be used to establish the pH range for Methyl Red indicator's colour shift. Methyl Red's pKa value is 5.0, which indicates that the indicator exists in equal levels in both its yellow basic and red acid forms at a pH of 5.0. The indicator will predominantly exist in its red acid form as the pH falls below 5.0 and in its yellow basic form as the pH rises over 5.0.Adding 0.120 M HCl to a sample of 24.0 mL of 0.120 M NaOH will cause a neutralising reaction that will result in a solution.
Learn more about Methyl Red here:
https://brainly.com/question/29294532
#SPJ4
How many grams (g) are in 0.329 moles of Ba3(PO4)2?
Answer:
About 203.381 grams
Explanation:
We need to first determine the molar mass of Ba3(PO4)2.
We have:
3 Bariums - 137.327*3 = 411.981
2 Potassiums - 39.098*2 = 78.198
8 Oxygens - 16*8 = 128
Add these together and we get 618.179 g/mol
If we only want 0.329 moles, then we multiply those two numbers together to get about 203.381 grams.
classify each of the following heterocyclic compounds as aromatic, anti-aromatic, or non-aromatic.
The classification of heterocyclic compounds as aromatic, anti-aromatic, or non-aromatic depends on their molecular structure and electron configuration.
Aromatic compounds are characterized by having a planar, cyclic arrangement of alternating double and single bonds, which results in an electron delocalization known as aromaticity. The most well-known example of an aromatic compound is benzene.
Anti-aromatic compounds have a similar arrangement of alternating double and single bonds, but the resulting electron configuration is not favorable for aromaticity, and the molecule is destabilized.
Non-aromatic compounds do not have the planar, cyclic arrangement of alternating double and single bonds required for aromaticity. Instead, they have a linear or non-planar arrangement of bonds that does not result in significant electron delocalization. It is necessary to specify the heterocyclic compounds in order to classify them as aromatic, anti-aromatic, or non-aromatic.
Learn more about heterocyclic compounds:
brainly.com/question/17164215
#SPJ4
how is the beginning and end of a range of a boiling point defined?
The beginning of a boiling point is the temperature at which a substance boils under standard conditions of 1 atm pressure and the end of a range of a boiling point is the temperature above which a substance can no longer be liquefied.
The range of a boiling point refers to the difference between the lowest and highest boiling point of a substance. The boiling point of a substance is defined as the temperature at which its vapour pressure is equal to atmospheric pressure and it changes from a liquid to a gas. The normal boiling point is usually used as a reference point to compare the boiling points of different substances.
On the other hand, the end of a boiling point range is defined as the “critical temperature” which is the temperature above which a substance can no longer be liquefied no matter how much pressure is applied. At this temperature, the vapour pressure of the substance is equal to its critical pressure, and it becomes a supercritical fluid.
It's essential to understand that the boiling point range is not a fixed value and can vary based on the pressure and temperature of the surrounding environment. In addition, some substances have a wide boiling point range, while others have a narrow range.
To learn more about boiling point here:
https://brainly.com/question/40140#
#SPJ11
at pressure, substance e boils at and substance f boils at . which has a higher enthalpy of vaporization?
The higher the enthalpy of vaporization, the higher the boiling point. So, based on the information given:
Substance E has a higher enthalpy of vaporization than Substance F because it boils at a higher temperature (-50°C) compared to Substance F (-87°C).
Substance C has a higher boiling point than Substance D because it has a higher vapor pressure (125 torr) compared to Substance D (115 torr) at 17°C.
It is not possible to determine which has a higher boiling point, Substance C or Substance D, based on the information that the enthalpy of vaporization of Substance A is bigger than that of Substance B. The higher the enthalpy of vaporization, the higher the boiling point. So, based on the information given:
Substance E has a higher enthalpy of vaporization than Substance F because it boils at a higher temperature (-50°C) compared to Substance F (-87°C).
Substance C has a higher boiling point than Substance D because it has a higher vapor pressure (125 torr) compared to Substance D (115 torr) at 17°C.
It is not possible to determine which has a higher boiling point, Substance C or Substance D, based on the information that the enthalpy of vaporization of Substance A is bigger than that of Substance B.
To know more about vaporization
brainly.com/question/14578189
#SPJ4
Investigators have found black and smokeless powder at the scene of a crime involving a fire. What is the BEST way for the investigators to analyze this
evidence?
A. by asking a dog to sniff it
B.
C.
D.
by using an ion mobility spectrometer (IMS)
by looking under a microscope
by washing it with acetone
These are some examples of traditional forensic analysis techniques:Hair and fiber analysis, spectroscopy, serology, and chromatography.
What techniques are utilized for evidence analysis? These are some examples of traditional forensic analysis techniques:Hair and fiber analysis, spectroscopy, serology, and chromatography (such as DNA examination)structural engineering, toxicology, pathology, anthropology, odontology, odontology, pathology, and review of suspicious documents.The crime scene staff may perform preliminary screening tests, sometimes known as presumptive testing, at the scene to assist in identifying the evidence that is most useful.Normally, traces of evidence at a crime scene shouldn't be taken from objects.As an alternative, the complete item should be processed in the lab.The evidence should be removed and packaged if it is tenuously attached to an object.Long before CSI arrives, the first step in an analysis of a crime scene is observation.It is used for police training.
To learn more about evidence analysis refer
https://brainly.com/question/27871837
#SPJ1
Consider the following reaction at some temperature: H_2O(g) + CO (g) H_2(g) + CO 2(g) K = 2.0 Some molecules of H_2O and CO are placed in a 1.0-L container as shown below. l When equilibrium is reached, how many molecules of H_2O, CO, H_2, and CO_2 are present? Do this problem by trial and error-that is, if two molecules of CO react, is this equilibrium; if three molecules of CO react, is this equilibrium; and so on.
The number of molecules of each species present at equilibrium can't be determined by trial and error.
The law of mass action and the equilibrium constant (K) determine the ratio of the concentrations of reactants and products at equilibrium, b. To find the number of molecules, you would need to know the initial concentrations of H_2O and CO and use an equilibrium expression to calculate the concentrations at equilibrium. Write down the balanced chemical equation for the reaction: H_2O(g) + CO (g) H_2(g) + CO_2(g)Define the initial concentrations of H_2O and CO. Write the equilibrium expression using the balanced chemical equation and the initial concentrations. Substitute the value of the equilibrium constant (K = 2.0) into the expression. Use the equation to solve for the equilibrium concentrations of H_2O, CO, H_2, and CO_2.Repeat the process for different initial concentrations of H_2O and CO to check if the results change. Verify that the sum of the concentration of reactants and products remains constant, as required by the law of mass conservation
learn more about equilibrium here :
https://brainly.com/question/11336012
#SPJ4
count the total number of sigma bonds and pi bonds in the compound below
Covalent bonds are one of the most important types of chemical bonds formed by the overlapping of an element's atomic orbitals. Because of this overlapping, a very strong bond is formed, and covalent bonds are the strongest known bonds.
A molecule can contain both sigma bonds and pi bonds.
A single bond in a covalent bond is always a sigma bond.
A double bond consists of a sigma bond and a pi bond, whereas a triple bond consists of two pi bonds.
When we look at the molecule, we can see that it has 14 single bonds, 1 double bond, and 1 triple bond.
As a result, the molecule has 16 sigma bonds.
(14+1+1)
The total number of pi bonds 3(1+2).
Learn more about sigma bonds here
https://brainly.com/question/30199016
#SPJ4
If 75.0 mL of a .650M solution of methylamine is reacted with 7.50 grams of methylamine chloride (CH3NH3Cl), what is the new pH if the original pOH was 1.744? Kb = 5.0 x 10-4
Please explain
The pH of acid is between 0-7 on pH scale while for base pH range is from 7-14. pH is a unitless quantity. Therefore, the pH of the solution is 2.7.
What is pH?
pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. More the value of hydronium ion concentration, more will be the solution acidic.
On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution. pH depend on the temperature. At room temperature pH scale is between 0 to 14. pH of neutral solution is 7.
Number of moles = .650M ×75.0 mL = 3.5 × 10⁻³ moles
Molarity of the methylamine = 3.5 × 10⁻³ moles/75.0 mL = 0.012 M
AH(aq) +H₂O ⇔H₃O⁺ (aq) + A⁻(aq)
I 0.012 0 0
C - x +x +x
E 0.012 -x x x
Kb= Antilog (-3.5) =5.0 x 10⁻⁴
Kb = [H₃O⁺] [A⁻]/[AH]
3.2 × 10⁻⁴ = x²/0.012 -x
3.2 × 10⁻⁴ (0.012 -x ) = x²
3.84 ×10⁻⁶ - 3.2 × 10⁻⁴x = x²
Solving the resulting quadratic equation
x=0.0018 M
pH=-log(0.0018 M) = 2.7
Therefore, the pH of the solution is 2.7.
To learn more about pH, here:
brainly.com/question/27945512
#SPJ1
how to do e notation learnign catalytics
E notation, also known as scientific notation, is a way of representing very large or very small numbers using exponential notation. In e notation, a number is represented as a coefficient multiplied by 10 raised to an exponent.
Here's how you can use e notation in Learning Catalytics:
Input the number in scientific notation using the letter "e" to represent "10^". For example, if you want to represent 1.23 x 10^4, you would input 1.23e4.
Use the e notation when answering questions that require it, such as numerical response questions or equation response questions.
If a question requires you to convert a number from standard form to e notation, you can use the following steps:
Count the number of places you need to move the decimal point to the right to get a coefficient between 1 and 10.
Write the coefficient followed by the letter "e" and the number of places you moved the decimal point, with a positive sign if you moved it to the right and a negative sign if you moved it to the left.
For example, if you need to convert the number 123,000 to e notation, you would move the decimal point 6 places to the left, getting 1.23. The e notation for 123,000 would then be 1.23e6.
Learn more about scientific notation here:
https://brainly.com/question/18073768
#SPJ4
when the elements in each pair are chemically combined, which element in each pair has a greater attraction for electrons?
O is a nonmetal that attracts electrons strongly in order to reach full octet valence. O has a stronger attraction for electrons than H because O is more electronegative. In contrast to Ca and O, S is a nonmetal and has a stronger attraction to electrons than K, a metal.
Fluorine is said to as the most electronegative element since it has the greatest propensity to draw a shared pair of electrons. The periodic table's most electronegative element is fluorine.
Fluorine has the highest electronegativity, whereas Chlorine has the highest electron affinity due to the tremendous repulsion in Fluorine's closely packed 2p subshell (whereas chlorine is an atom with a larger atomic size).
To know more about electronegative elements click here:
brainly.com/question/14455124
#SPJ4
Calculate the molecular masses of H2. ?
H2 has a molecular mass of 2 and a molecular weight of 1 u and 2u. When hydrogens join forces to form a hydrogen molecule, the result is a gas known as H2.
How can you determine an atom's mass?Find a Single Atom's Atomic Mass The alpha particle of a single particle can be determined by summing the total masses of the protons and neutrons in that particular isotope since their combined masses make up nearly each of the mass of a given atom.
How can you determine an element's atomic mass?The numbers of neutrons and protons in an atom are simply added to determine the atom of that particular atom. For instance,Think about an oxygen atom, which has 8 protons, 8 neutrons, and 8 electrons. You only need to multiply the atomic weight of oxygen by 8 electrons and 8 neutrons.
To know more about molecular visit :
https://brainly.com/question/14614762
#SPJ4
An empty volumetric flask weights 74.85 grams. After 25.0 mL of a liquid is added, the flask and liquid weigh 111.50 g. What is the density of the liquid?
Density of liquid is calculated to be equal to 1466 kg/m^3.
What is density?Density is the mass per unit of volume of substance and the symbol for density is ρ .
Mass of liquid = 111.50 g - 74.85 g = 36.65 g
Convert the volume of the liquid from milliliters to cubic meters. We can do this by using the conversion factor of 1 mL = 10^-6 m^3:
volume of liquid = 25.0 mL x 10^-6 m^3/mL = 2.50 x 10^-5 m^3
Density of liquid = mass of liquid / volume of liquid = 36.65 g / (2.50 x 10^-5 m^3)
= 1466 kg/m^3
To know more about density, refer
https://brainly.com/question/26364788
#SPJ4
If salicylic acid dissociated into two particles when dissolved into myristic acid (it does not), would this change your calculated Kr value? Explain why.
The dissociation of salicylic acid into two particles does not modify the amount of solute in either phase, the ratio of solute concentration in one phase to concentration in the other phase remains constant. As a result, the dissociation has no effect on the computed Kr value.
The partition coefficient, commonly known as the Kr value, is a measure of the distribution of a solute between two immiscible phases. It is determined by the ratio of the solute concentration in one phase to the concentration in the other.
It is crucial to note that the dissociation of a solute into many particles can influence the solute's solubility in a given solvent, but this has no effect on the Kr value because the Kr value is a measure of the solute's distribution between two phases, not its solubility in a specific solvent.
For more such questions Kr value.
https://brainly.com/question/30433642#
#SPJ11
the density of silver is 10.5 g/ml. what mass of silver (in mg) has a volume of 15 ml?
Answer:
157,500mg
Explanation:
Mass = density × volume
= 10.5 g/ml × 15 ml
= 157.5 g
Since the answer is asked in mg we will have to convert 157.5 g to mg:
157.5 × 1000 = 157, 500mg
The mass of silver with a volume of 15 ml can be calculated as follows:
mass = density × volume mass = 10.5 g/ml ×15 ml mass = 157.5 g
Since 1 g = 1000 mg, then 157.5 g = 157.5 × 1000 mg = 157,500 mg.
So, the mass of silver with a volume of 15 ml is 157,500 mg.
Silver is a dense metal with a high melting and boiling point, which is something to keep in mind. It is an important material in numerous industries, including electronics, jewellery, and coinage due to its excellent electrical and thermal conductivity. Because of its antibacterial qualities and because of its particular shine and malleability, it is also widely employed in the arts and in the medical area. Although silver's density is largely constant, conditions like temperature and purity can have an impact. The ability to calculate a substance's volume and mass using its density is another useful attribute that is significant in disciplines like materials science and engineering.
To know more about boiling point click here:
brainly.com/question/2153588
#SPJ4
What is Calcium Nitrate?
Calcium nitrate, also called Norgessalpeter (Norwegian salpeter), is an inorganic compound with the formula Ca(NO3)2(H2O)x.
What are compounds ?
A compound is a substance consisting of two or more elements chemically combined in a fixed ratio. They differ from mixtures consisting of two or more substances physically mixed without chemical bonding. Compounds have their own physical and chemical properties that differ from those of individual elements. For example, the compound water (H2O) has different properties (boiling point, density, solubility, etc.) than its components hydrogen (H2) and oxygen (O2).
Compounds are formed by chemical reactions in which atoms of different elements combine to form new substances. The formation of a compound can be represented by a chemical formula that indicates the type and number of atoms in the compound.
To know more about compounds , click the link below ;
brainly.com/question/26487468
#SPJ4
How many atoms of oxygen are in 2.50 moles of SO22?
Answer:
2.50
Explanation:
atoms. To find the number of oxygen atoms in 2.50 moles of SO2, we can use the following formula:
atoms = moles x Avogadro's number
Avogadro's number is approximately 6.02 x 10^23 atoms/mol.
atoms = 2.50 x 6.02 x 10^23
atoms = 15.05 x 10^23
So, there are approximately 15.05 x 10^23 atoms of oxygen in 2.50 moles of SO2.
Venus has an average distance to the sun of 0.723 AU. In two or more complete sentences, explain how to calculate the orbital period of Venus, and then calculate it.
Venus has an average distance to the sun of 0.723 AU. It completes an orbit every 224.7 days.
What is an orbital period ?The term orbital period is defined as the time it takes to complete one full orbit around a celestial body. “the orbit period depends on the altitude of the satellite” type of period.
Given :
A planet has an average distance to the sun of 0.66 AU,
a = 0.723 AU
The orbital period of the planet is determined using Kepler's law of planetary motion. Mathematically, the Kepler's law is given by :
T² = (4π²/GM)a³;
where T is in Earth years, a is distance from the sun in AU, M is the solar mass (1 for the sun), G is the gravitational constant.
In the given units, 4π²/G = 1
T² = 0.723³
T = 0.536
Earth years = 224.7 days
Thus, Venus has an average distance to the sun of 0.723 AU. It completes an orbit every 224.7 days.
To learn more about an orbital period, follow the link;
https://brainly.com/question/14494804
#SPJ1
group theoretical yield actual yield a 5.10 g 5.01 g b 4.99 g 4.38 g c 5.05 g 5.07 g
what is the percent yield of silver hydroxide based on group a’s results?
a) 9.00% b) 102.0% c) 98.2% d) 48.2%
Percent yield of silver hydroxide based on group a's results = 98.2%
Percent yield is calculated by dividing the actual yield of a reaction by the theoretical yield and multiplying the result by 100. The theoretical yield is the expected amount of product that should be obtained based on the stoichiometry of the reaction.
In group a, the theoretical yield of silver hydroxide is 5.10 g and the actual yield is 5.01 g. The percent yield can be calculated as follows:
Percent yield = (Actual yield / Theoretical yield) x 100 = (5.01 / 5.10) x 100 = 98.2%
Hence, the percent yield of silver hydroxide based on group a's results is 98.2%.
Learn more about percent yield here:
https://brainly.com/question/11963853
#SPJ4
If 15.0g of N₂O4 was produced, how many moles of O2 were required?
The number of mole of O₂ required for the reaction if 15.0 grams of N₂O4 is produced, is 0.326 mole
How do I determine the mole of O₂ required?We'll begin by obtaining the number of mole in 15.0 g of N₂O₄. Details below:
Mass of N₂O₄ = 15 gMolar mass of N₂O₄ = 92 g/molMole of N₂O₄ =?Mole = mass / molar mass
Mole of N₂O₄ = 15 / 92
Mole of N₂O₄ = 0.163 mole
Next, we shall write the balanced equation for the reaction. This is givrn below:
N₂ + 2O₂ -> N₂O₄
From the balanced equation above,
1 mole of N₂O₄ was produced from 2 moles of O₂
Finally, we shall determine the number of mole O₂ required for the reaction. Details below:
From the balanced equation above,
1 mole of N₂O₄ was produced from 2 moles of O₂
Therefore,
0.163 moles of N₂O₄ will be produced from = 0.163 × 2 = 0.326 mole of O₂
Thus, number of mole of O₂ required is 0.326 mole
Learn more about number of mole:
https://brainly.com/question/23350512
#SPJ1
Consider the following elementary gas-phase reversible reaction to be carried out isothermally with no pressure drop and for an equal molar feed of A and B with CA0 = 2. 0 mol/dm3. (a) What is the concentration of B initially? CB0 = _______ (mol/dm3)(b) What is the limiting reactant? _______(c) What is the exit concentration of B when the conversion of A is 25%? CB = ______ (mol/dm3)(d) Write –rA solely as a function of conversion (i. E. , evaluating all symbols) when the reaction is an elementary, reversible, gas-phase, isothermal reaction with no pressure drop with an equal molar feed and with CA0 = 2. 0 mol/dm3, kA = 2dm6/mol2·s, and KC = 0. 5 all in proper units –rA = _______. (e) What is the equilibrium conversion?(f) What is the rate when the conversion is:(1) 0%?(2) 50%?(3) 0. 99 Xe?
Considering the following elementary gas-phase reversible reaction to be carried out isothermally with no pressure drop,
The concentration of B initially, CB0 is 1.0 mol/dm3The limiting reactant is CThe exit concentration of B when the conversion of A is 25% CB = 12.5%The value of –rA solely as a function of conversion (i. E. , evaluating all symbols) when the reaction is an elementary, reversible, gas-phase, isothermal reaction with no pressure drop with an equal molar feed is –rA = CA0 /kA + kC = 2 /2.5 = 0.8The equilibrium conversion is given by r = kA*CA - kC*CC = 2*2-1*2.5=1.5The rate when the conversion is :1) 0% = 0
2) 50%= 0.5
3) 0.99Xe= 99%
When a chemical reaction is reversible, the reactants and products both react to create the final product at the same time.
Such a reaction involves constant forward and backward reactions between the reactants and products.
Simply said, when molecules collide, reactant bonds are disrupted, and the energy released from this broken connection is used to create new product molecules.
Learn more about Reversible reaction:
https://brainly.com/question/15232584
#SPJ4
How do you know if two atoms will bond?
Answer:
The factor that determines whether or not two atoms will bond to form a molecule is their number of valence electrons.
Explanation:
Two atoms will bond if they have a difference in electrical charge. Atoms with an unequal number of protons and electrons have an electric charge, and when they come together they will form a chemical bond.
What is electrical charge?Electrical charge is an important physical property of matter that exists in two forms, positive and negative. Positively charged particles, such as protons, are attracted to negatively charged particles, such as electrons. In the most basic sense, electrical charge is simply a measure of the quantity of protons and electrons in a given object. In other words, it is a measure of the object's ‘electrical balance’. All matter is made up of atoms, and atoms are made up of positively charged protons and neutral neutrons, as well as negatively charged electrons. The number of protons and electrons in an atom is always equal, meaning that the atom (and therefore the object it is part of) has no net charge.
To learn more about electrical charge
https://brainly.com/question/874116
#SPJ4