how many grams are in 4.2 moles of PO4

Answer:

See below

Explanation:

A thermodynamic system's change in disorder or randomness is measured by a phenomena called entropy change.

The amount of thermal energy per unit of temperature in a system that cannot be used to carry out beneficial work is known as entropy. Since work is produced by ordered molecular motion, entropy also serves as a proxy for a system's molecular disorder or unpredictability.

Entropy Change is a phenomena that measures the evolution of randomness or disorder in a thermodynamic system. It has to do with the heat or enthalpy conversion that occurs during work. More randomness indicates a high entropy in a thermodynamic system.

The entropy grows from solid to liquid to gas, and by observing the phases of the reactants and products, you can determine if the change in entropy is positive or negative. Entropy will rise whenever there is a rise in gas moles.

To learn more about Entropy Change refer to:

https://brainly.com/question/6364271

#SPJ4

Acids and alkalis have different chemical properties or reactions and even physical properties.

These properties are defined as those properties which become evident during or after a chemical reaction after the identity of the substance is changed during chemical reaction.

These properties cannot be determined externally just by viewing the substance ,these change immensely after a substance undergoes a chemical change.These are used for identification of unknown substances and for building up chemical classifications.

Learn more about chemical properties,here:

https://brainly.com/question/1935242

#SPJ1

Answer: I need to know what the molecule is probably A or C

Explanation:

Hexokinase is the initial enzyme of glycolysis, catalyzing the phosphorylation of glucose by ATP to glucose-6-P. It is one of the rate-limiting enzymes of glycolysis.

Through facilitated diffusion, which is facilitated by the glucose transporter (GLUT) protein family and permits monosaccharides to pass the cell membrane predominantly as a result of concentration gradients, glucose and other monosaccharides enter the cell.

2,3,6 Hexokinase enzymes phosphorylate the molecules as they enter the cell, thereby trapping the monosaccharide inside the cell because phosphorylated monosaccharides cannot pass through the GLUT. 2,3,6.

Glucokinase is an isoform of hexokinase that differs from hexokinase in two ways: first, unlike hexokinase, it is not inhibited by the reaction product, glucose-6-phosphate; and second, it has a lower binding affinity for glucose than the other hexokinase enzymes. 2,3,6 Because of these two variations, glucokinase can function as a sensor of fuel supply because it only changes in reaction to the availability of glucose.

To learn more about  Hexokinase refer to:

https://brainly.com/question/13996560

#SPJ4

The prepared table and the formula and important uses of compounds listed is given in the table attached:

Sodium Chloride (NaCl), also known as table salt, is a chemical compound made up of one sodium (Na) ion and one chlorine (Cl) ion. It is a common seasoning and preservative in food and is also used in water treatment to remove impurities.

Calcium Carbonate (CaCO3) is a chemical compound made up of one calcium (Ca) ion, one carbon (C) ion and three oxygen (O) ions.

Sodium Bicarbonate (NaHCO3), also known as baking soda, is a chemical compound made up of one sodium (Na) ion, one hydrogen (H) ion, one carbon (C) ion and three oxygen (O) ions.

Potassium Nitrate (KNO3) is a chemical compound made up of one potassium (K) ion, one nitrogen (N) ion and three oxygen (O) ions.

Therefore, Diammonium Phosphate (DAP) is a chemical compound made up of two ammonium (NH4+) ions and one phosphate (PO4) ion.

Learn more about sodium chloride from

https://brainly.com/question/24878544

#SPJ1

1) Propanyl chloride is an acid chloride. This propanyl chloride on reaction with LiAlH4 and H3O+ yield corresponding alcohol. 2. Methyl propanoate on reaction with aniline yield corresponding amide. 3. Amide on hydrolysis yield carboxylic acid.

When methyl propanoate reacts with lithium aluminum hydride (LiAlH4), the carbonyl group of the ester is reduced by the hydride ion (H-) from LiAlH4 to form an alcohol. The final product of this reaction would be the alcohol derived from the acyl portion of methyl propanoate. When this alcohol is then treated with hydrochloric acid (HCl) or another acid, it will undergo a protonation, forming the corresponding alkyl carbinol. The final product of this reaction is the carbinol and the carboxylic acid derived from the acyl portion of methyl propanoate.The product of the reaction between methyl propanoate and LiAlH4 then H3O+ would be the following structure:

H3C-C(=O)-O-CH2-CH3

| |

H H2O

The product of the reaction is the Carboxylic acid derived from the acyl portion of methyl propanoate.

Learn more about hydrolysis here:

https://brainly.com/question/1403345

#SPJ4

Answer:

Explanation:

The tank design of the truck is useful for transporting gas because it is able to hold large volumes of gas while taking up minimal space. The container is typically long and cylindrical in shape, allowing the gas to be compressed and stored in a smaller space.

If the truck were carrying a liquid, the container would likely be designed differently. Liquids take the shape of their container, so the container would need to be able to hold the liquid in an upright position without spilling. This could be achieved through the use of a tank with a closed top and a small opening at the bottom for dispensing the liquid.

For a solid, the container would also need to be designed differently. Solids have a fixed shape and volume, so the container would need to be able to hold the solid without crushing or altering its shape. This could be achieved through the use of a container with walls that are thick and sturdy enough to support the weight of the solid.

The equipment you might use to prevent energy being lost during the heating of the ice/water is : calorimeter.

A calorimeter is an object used for the process of measuring the heat of chemical reactions or physical changes and also heat capacity. Differential scanning calorimeters, isothermal micro calorimeters, titration calorimeters and accelerated rate calorimeters are the most common types.

Device used to measure the amount of heat involved in a chemical or physical process is called  calorimeter. For example, when exothermic reaction occurs in a solution in calorimeter, heat produced by the reaction is absorbed by solution, that results in increase in temperature.

To know more about calorimeter, refer

https://brainly.com/question/2963957

#SPJ1

A tetrahedral is an object that has a central atom surrounded by four other atoms.

Bond angles of 109.5° are formed between each of the surrounding atoms and the centre atom. The tetrahedron, often known as a 3-simplex, is the three-dimensional manifestation of the more generic idea of a Euclidean simplex.

When four additional atoms are bound to the centre atom of a molecule, the geometry is known as tetrahedral. Tetrahedra have sp3 hybridised orbitals as their structure.

The centre atom in this scenario lacks a lone pair of electrons. The centre atom in this scenario lacks a lone pair of electrons. Complete response: Tetrahedral molecules are ones in which the centre atom is bound to four other atoms and lacks any lone pair of electrons. 

To learn more about tetrahedral representation refer to:

https://brainly.com/question/11383496

#SPJ4

If the plants in a biome grow very tall, then statement b The biome receives abundant sunlight most likely describes the abiotic factors in the biome.

An abiotic factor in a biome or ecosystem can be defined as any nonliving variable that helps to shape the features of the are under study, which include for example, temperature, sunlight, water availability for the species living in the area, etc.

An abiotic factor in a biome or ecosystem is characterized to be the counterpart of the biotic living factors in order to shape the homeostasis of the ecosystem.

Therefore, with this data, we can see that an abiotic factor in a biome is any nonliving factor that helps to form the features of a particular ecosystem such as sunlight in the case of areas with high biodiversity.

Learn more about abiotic factors here:

https://brainly.com/question/12689972

#SPJ1

287.13 grams of Al₂O₃ were decomposed. Therefore, option A is correct.

The term molar mass is defined as the mass in grams of one mole of the compound. A mole of any substance is 6.022 × 10²³ molecules. It is called as Avogadro's number. The molar mass is a bulk property, it is not molecular, property of a substance.

2Al₂O₃ ⇒ 4Al + 3O₂

Thus, 4 mol of Al combine with 3 mol of oxygen to form 2 mol of Al₂O₃.

2 mol of Al corresponds to 2 × 27 = 54g

Thus, the weight of Al used in the reaction is 108 g.

Molar mass of Al₂O₃ is 101.96g/mol.

5.63 moles of Al = 5.63 × 54 / 101.96

= 287.13 grams

Thus, 287.13 grams of Al₂0₃ were decomposed, option A is correct.

To learn more about the molar mass, follow the link;

https://brainly.com/question/12127540

#SPJ1

(A) The value of the first-order rate constant for the decomposition of Cl2O2 is -0.00000000000058 microseconds^-1. (B) The half-life for the decomposition of Cl2O2 is 1201.694915254237 microseconds.

A) To determine the value of the first-order rate constant, we can use the following equation:

= -ln([Cl2O2]/[Cl2O2]o) = kt

Where [Cl2O2] and [Cl2O2]o are the concentrations of Cl2O2 at different times and k is the first-order rate constant.

By substituting the values from the table into the equation, we can solve for k:

= -ln(6.60x10^-8/6.60x10^-8) = k(17210^-6)

= k = -ln(6.60x10^-8/6.60x10^-8)/(17210^-6)

= k = -0.000000000000/0.000172

= k = -0.00000000000058

The value of the first-order rate constant for the decomposition of Cl2O2 is -0.00000000000058 microseconds^-1.

B) The half-life for a first-order reaction can be calculated using the following equation:

= t1/2 = (0.693/k)

Where t1/2 is the half-life and k is the first-order rate constant.

By substituting the value of k from above, we can calculate the half-life for the decomposition of Cl2O2:

= t1/2 = (0.693/-0.00000000000058)

= t1/2 = 1201.694915254237 microseconds

The half-life for the decomposition of Cl2O2 is 1201.694915254237 microseconds. It's worth to mention that the rate constant has a negative sign which indicates that the reaction is a decomposition reaction.

To know more about decomposition please refer: https://brainly.com/question/8009068

#SPJ4

There are 7.4 x 10²² molecules of methane in 0.123 mole of methane (ch4).

Methane is a substance that has the chemical formula CH4 (one carbon atom bonded to four hydrogen atoms). It is the simplest alkane, a group-14 hydride, and the primary component of natural gas. Methane is very abundant on Earth, making it an economically appealing fuel, but due to its gaseous nature at standard temperatures and pressure, its capture and storage present technical problems. Methane is a naturally occurring gas that can be found underground and beneath the bottom.

A mole is a measurement unit for numerous particles (atoms, molecules, and ions), where 1 mole equals the number of particles in a substance as the number of atoms in 12 grams of C-12.

1 mole [tex]= 6.02*10^{23}[/tex] particles  

Can be formulated :

N = [tex]n *[/tex] No

N = number of gas particles  

No = Avogadro number ([tex]6.02*10^{23}[/tex])  

n = number of moles  

Input the value :

N [tex]= 0.123 * 6.02*10x^{23}[/tex]

N [tex]= 7.4 * 10^{22}[/tex]

Learn more about methane here

https://brainly.com/question/29196051

#SPJ4

The tripeptide val-gly-ser at pH 2 is composed of three amino acids: Valine, Glycine and Serine. The overall structure is shown below:

Molecules are the smallest unit of matter that can exist and still retain the properties of the material from which it came. Molecules are made of two or more atoms that are bonded together. Each molecule has its own distinct characteristics, depending on the types of atoms it contains and the way they are bonded. Molecules are the building blocks of all matter in the universe, from the air we breathe to the food we eat.

Valine:
H2N-CH(CH3)-CH2-COOH

Glycine:
H2N-CH2-COOH

Serine:
H2N-CH(OH)-CH2-COOH

The overall structure of the tripeptide val-gly-ser at pH 2 is shown below:

H2N-CH(CH3)-CH2-COOH  ------  H2N-CH2-COOH  ------  H2N-CH(OH)-CH2-COOH

To know more about molecules click-
https://brainly.com/question/26044300
#SPJ4

Because neutrons are not electrically charged, they may enter atomic nuclei more easily than protons or alpha particles. It is well known that the neutron has evolved into a powerful nuclear weapon.

A neutron is a subatomic particle that exists in the nucleus of all atoms except basic hydrogen. The name of the particle comes from the fact that it has no electrical charge; it is neutral. Neutrons have a very high density. Neutrons, like protons, are subatomic particles that exist within the nucleus of every atom. The lone exception is hydrogen, which has a single proton in its nucleus. Neutrons are somewhat heavier than positively charged protons and have a neutral electric charge (neither negative nor positive). The neutron, symbol n, is a subatomic particle with no net electric charge. Atomic nuclei are made up of protons and neutrons. These, together with protons, are referred to as nucleons and are found within the nucleus.

Here,

Because neutrons are not electrically charged, they may pass through atomic nuclei more easily than protons or alpha particles. It is well known that the neutron has evolved into a potent nuclear weapon.

To know more about neutrons,

https://brainly.com/question/19161517

#SPJ4

Below are the Lewis dot structure for diatomic molecule Cl2 S2 N2.

Lewis structures are diagrams that show the valence electrons of atoms within a molecule.

They are often referred to as Lewis dot structures or electron dot structures.

The valence electrons of atoms and molecules, whether they reside as lone pairs or within bonds, can be seen using these Lewis symbols and structures.

1) Identify the atoms that are linked to one another.

2) Count the valence electrons the molecule contains.

3) Substitute two electrons for each bond between the two atoms.

4) To complete the octet of the nearby atoms, add the remaining valence electrons that are available.

To learn more about Lewis Dot structure from given link

https://brainly.com/question/20300458

#SPJ1

Occur between atoms of similar electronegativity with lower energy state and higher stability involve the sharing of electrons.

A covalent bond is established when one or more pairs of electrons are exchanged between two atoms. These electrons are simultaneously pulled to the two atomic nuclei. When the difference in electronegativities between two atoms is too tiny for an electron transfer to take place and produce ions, a covalent bond is created. Ionic bonds are more likely to form when the electronegativity of the components differs significantly. Normally, atoms with similar electronegativity elements join together to create covalent bonds. When two atoms with the identical electronegativity come together, they form pure covalent bonds. The polarity of the covalent bond is due to minute variations in the electronegativity of the atoms. Ionic bonds form when two or more atoms have different electronegativity values on the Pauling scale. A full electron shell is created when atoms make covalent bonds, which increases stability. Atoms can fill out their outer electron shell and achieve stability by sharing their outermost (valence) electrons.

To learn more about covalent bond visit,

https://brainly.com/question/19382448

#SPJ4

A robust and pure protein called alpha keratin can find harm in your hair.

Alpha keratin is a strong and pure protein that can hunt out damage in your hair. Once the damage has been located, it bonds to it and fills in any weak areas to make repairs. You'll have gorgeous, unbelievably healthy hair once it repairs damaged hair.

Proteins in the body include collagen (KOL-uh-jin). Numerous biological parts, including the hair, skin, nails, bones, ligaments, tendons, cartilage, blood vessels, and intestines, contain different forms of collagen.

Silk fibres are made up of proteins called fibroins. Even though the precise structural features of the huge, complex proteins that make up the many varieties of silk vary, all fibroins have a few traits. additionally see fibrous proteins.

To learn more about Alpha Keratin refer to:

https://brainly.com/question/28837380

#SPJ4

The bubble thickness just as the last vestige of color vanishes and (b) the last color seen is 75.02nm

A pattern of conflict (plural interference patterns) The phase difference between two waves is depicted as a series of light and dark bands that vary in space. Thomas Young demonstrated how the interaction of two sources of light in the same medium results in an interference pattern.

In an interference pattern formed due to a thin film, the bright bands occur when constructive interference takes place. Constructive interference in a thin film is calculated as follows:

2nd = (m + 1/2)λ

d = (m + 1/2)λ/2n = (0+1/2)400nm/2(1.333)

d = 75.02nm

Here n is the refractive index of medium, 2 is the wavelength, m is the order, and d is the thickness of the film.

The wavelength of the light is considered 400 nm because the last color that appears is violet.

Therefore, the thickness of the film is 75.02 nm.

To know more about interference visit:

https://brainly.com/question/16098226

#SPJ4

the above statement is true which defines the hybridization as The process of blending atomic orbitals as atomic nuclei approach each other to form a bond

The process of blending atomic orbitals as atomic nuclei approach each other to form a bond is known as hybridization. In this process, atomic orbitals of similar energy combine to form new hybrid orbitals that are more stable and have specific geometric shapes. This enables the atoms to form chemical bonds with other atoms in a specific way, which helps to account for the observed molecular geometry of many compounds. The type of hybridization that occurs depends on the number of atoms and electrons involved in the bonding process.

Learn more about  atomic orbitals here:

https://brainly.com/question/29561958

#SPJ4

An exclusion clause by the scientists might prevent a company or institution from using a solution discovered by these scientists.

Exclusion clauses can be defined as mutual agreements that exclude the use of the info for certain contentious types of research, which may hamper the use by the company of certain discoveries from these researchers beyond the scope of the work they have done.

Therefore, with this data, we can see that an exclusion clause in science may hamper the use of discoveries for a given company.

Learn more about discoveries in science here:

https://brainly.com/question/26397019

#SPJ1

N-octane is a hydrocarbon with eight carbon atoms.

Equilibrium is a state of balance or stability between opposing forces or actions. It is a state in which there is no net change in a system and all forces are in balance. In economics, it is used to describe the situation in which supply and demand are equal, resulting in a stable market price and no tendency for it to change.

At 1 atm of pressure, the liquid and solid phases of n-octane are in equilibrium at a temperature of -164.8 °C (-258.6 °F). This is the melting point of n-octane, and is the temperature at which it transitions from solid to liquid. At temperatures below this, n-octane is in a solid state. At temperatures above this, n-octane is in a liquid state.

To know more about equilibrium click-
https://brainly.com/question/19340344
#SPJ4

By bringing the wand close to the generator, you will alter the electric field, increasing the electric potential on the generator. More energy will then be dissipated in any arc or corona discharge.

Potential energy in physics is the energy that an item retains as a result of its position in relation to other objects, internal tensions, electric charge, or other elements.

Similar to this, when a spring is moved away from its equilibrium position, it gains some energy, which we can notice by the stress our hands experience when we stretch it.

Potential energy is a type of energy that arises from a change in its position or state, according to our definition.

The different types of potential energy are:

Learn more about potential energy here https://brainly.com/question/14427111

#SPJ1

If 75.0 g of water at 30.0°c absorbs 900 calories, the new temperature will be 42°C.

In thermodynamics, the specific heat of a substance (symbol cp) is the heat capacity of a sample of the substance divided by the mass of the sample, sometimes called the mass heat capacity. Informally, it is the amount of heat that must be added to a unit mass of a substance to cause a unit temperature rise. The SI unit for specific heat capacity is Joule/Kelvin/Kilogram, J kg⁻¹ K⁻¹. For example, it takes 4184 Joules of heat to raise the temperature of 1 kg of water by 1 K, so the specific heat capacity of water is 4184 J kg⁻¹ K⁻¹.

Q = mcΔT

1 Kcal. = 4184 J

0.9 K Cal. = 4184 × 0.9

0.9 K Cal. = 3765.6 J

3765.6 = 75 × 4.186 × ΔT

ΔT = 3765.6/(75 × 4.186)

ΔT = 3765.6/313.95

ΔT = 11.99

T₂ - T₁ = 11.99

T₂ = 11.99 + T₁

T₂ = 11.99 + 30

T₂ = 41.99°C

T₂ ≈ 42°C

To learn more about specific heat, here:

https://brainly.com/question/11297584

#SPJ4

The complete question is as follows:

if 75.0 g of water at 30.0°c absorbs 900 calories, the new temperature will be ________.

The product cyclohexanol with all hydrogen atoms is attached below.

A single hydroxyl group is added to cyclohexane to create the alcohol cyclohexanol. the ancestor of the cyclohexanol class. It plays the part of a solvent. It belongs to the class of cyclohexanols and is a secondary alcohol.

Cyclohexanol is a very weak acidic compound that is soluble in water (based on its pKa). Garden tomato (variety), okra, and sweet basil contain the chemical cyclohexanol, which has the flavors of camphor, menthol, and phenol. This property makes cyclohexanol a potential biomarker for the consumption of these foods.

When cyclohexanol is heated with phosphoric acid in a catalytic amount, the result is cyclohexene because water is eliminated during dehydration. The phosphoric acid's function is to protonate the alcohol (described in "step a" below), making it a useful leaving group.

To know more about cyclohexanol visit:

https://brainly.com/question/14495488

#SPJ4

a. They require much less food.

of the following is an advantage that ectotherms have over endotherms of the same size

Another crucial fact is that endotherms often have far greater metabolic rates than ectotherms. This is due to the fact that they must consume a lot of fuel (food) to keep their internal body temperature stable.

The same amount of food can support a bigger population of similarly sized ectotherms than endotherms because endotherms use more energy than ectotherms.

learn more about ectotherms

https://brainly.com/question/13871042

#SPJ4

No, ethanol is not a better solvent for the following reaction. because  ethanol  is more acidic then  alkyne.  so  NH2- abstracts proton from ethanol insted of alkyne. so  expected reaction will not proceed if we use ethanol. CH3CH2OH  +   NH2-    ----------->  CH3CH2O-   +  NH3

Ethanol is a polar solvent, which means that it has a partial positive charge on one end and a partial negative charge on the other end. This polarity allows ethanol to dissolve polar compounds, such as acids and bases, which are commonly involved in proton transfer reactions. Ethanol also has a relatively low boiling point and is relatively less toxic than other solvents, making it a convenient choice for many laboratory procedures.

Learn more about polar solvents here:

https://brainly.com/question/3184550

#SPJ4

The complete question is:

would ethanol (ch3ch2oh) be a suitable solvent in which to perform the following proton transfer?

CH3CH2OH  +   NH2-    ----------->  CH3CH2O-   +  NH3

A chemical test for starch is to add iodine solution (red) and see if it turns blue/black in colour.

To identify the presence of complex carbohydrates, use an iodine solution. As the yellow-orange iodine reacts with the starch, it will turn blue-black. (The presence of simple carbohydrates or sugars will not cause the iodine solution to react.)

Credit: Carbohydrate Chemistry Slide #13 by Dr. Karin Allen. As a result, the benchtop iodine colour is brown. The amylose-iodide complex is blue-black, but the polyiodides (I3, I5, and I7) are colourless. Since the Iodine starch reaction is recognisable, it is used to determine the presence of starch in a sample.

The iodine test is an identification test for starch based on a chemical reaction. Iodine and starch in this experiment combine to generate a distinct blue-black coloured compound. The charge transfer (CT) complex between iodine and the helical structure of amylose occurs when the iodine is inside the spiral or helical helix.

To learn more about positive for iodine refer to:

https://brainly.com/question/1178789

#SPJ4

A carbon atom that is joined to four separate atom kinds or groups is known as an asymmetric carbon atom.

Tryptophan is the only amino acid that has two rings on it. At pH 7.4, it looks like this,

You can see the chiral carbon highlighted. You can tell that it's an [tex]$s p^3$[/tex]carbon and that it has four different substituents on it [tex]( $\mathrm{H}, \mathrm{NH}_3^{+}, \mathrm{COO}^{-}$, and $\mathrm{CH}_2-$ stuff).[/tex]

Therefore it's chiral.

To learn more about chiral carbon atom refer to:

https://brainly.com/question/9522537

#SPJ4